Construction Health and Safety Training and Seminars
Construction
Construction Health and Safety Training Classes
Health and Safety aspects of construction
Some important terms:
health, safety, construction, osha building, civil engineering and construction.
| Filter By Training Type: |
From Compliance Solutions
Disaster Site Worker-Open Enrollment Seminar

The 16-Hour Disaster Site Worker Training
Course-Is our newest certification course designed
specifically for workers involved in the clean-up of designated Federal, State
and Local as well as non-designated Disaster Sites. Students who attend this
course are first REQUIRED to attend the
OSHA 10-Hour Construction Safety or the
OSHA 30-Hour Construction Safety training course to
more...
10-Hour OSHA Construction Safety
The
10-Hour OSHA Construction Safety
Seminar provides entry level workers instruction on the basic
recommended training subjects OSHA requires a wide variety of trade and industry
workers. This Open Enrollment (any employee from any company may attend) course
is completed in one sitting over a 10-hour day.
Completion Requirements: Students
proceed through 10 classroom hours of
more...
From 6P International, LLC
30 Hour Construction Industry OSHA Outreach Training Program
COURSE DESCRIPTION:
This course covers thirty (30) hours of training, required by the Occupational Health and Safety Act (OSHA), that apply toward the 30-hour Construction Industry course completion card. The course is comprised of 25 sections, each either one or two hours in length, and covers topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of this
more...
10 Hour Construction Industry OSHA Outreach Training Program w Study Guide
COURSE DESCRIPTION:
This course is designed for construction workers, foremen, job supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job.
more...
10 Hour Construction Industry Outreach Training Program - Spanish
COURSE DESCRIPTION:
This course is designed for construction workers, foremen, job supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the
more...
Stormwater Management During Construction
COURSE DESCRIPTION:
This course has been developed for the Erosion Control Supervisor Responsible for the proper installation, maintenance and inspection of Best Management Practices (BMPs) for the control of erosion and sedimentation at construction sites.
more...
From Radiofrequency Safety International Corporation
Oil Gas OSHA 10 Hour*new lower price*
RSI - The Leader in Oil & Gas Safety Training now offers a long requested training solution to obtain these certifications. These selected courses qualify the student for a coveted OSHA 10 Hour Card indicating the holder as a "Competent" individual. The web-based training provides 24/ 7 access with tracking, testing, and documentation via our "Learning Manager System". Each course is tested and
more...
RF Ultimate Contractor Safety Training
RSI's RF Ultimate Contractor Safety Training AKA Train-the-Trainera (TTT) course is what your organization needs in order to competently administer policies and train employees in industry specific safety issues and to become informed regarding carrier and GC EH&S polices. After completion, this three-day course allows the attendee to demonstrate the ability to train employees in a variety of
more...
RF Safety for Building Maintenance Workers
This a RF Site Safety Awarenessa a training course provides information of accountability and responsibility for a safe work site. This course will provide participants with a dynamic interactive educational experience and is delivered by instructors with over a century of combined knowledge. The class will envelop a comprehensive overview focusing on best practices for due diligence and
more...
From Wulf Educational Services
10 Hour OSHA Construction Safety
OSHA Ten Hour Construction Safety Classes
WES is offering monthly OSHA 10 Hour Construction Safety classes in the Denver metro area. These classes can be taught in English and Spanish for those diverse work forces and can be taught at your workplace or at our facility depending on client need. We offer standard 10 hour courses and special employer selected topic classes. The typical classes are
more...
OSHA 30 Hour Construction Safety

OSHA Thirty Hour Construction Safety Classes
WES is offering monthly OSHA 30 Hour Construction Safety classes in the Denver metro area. These classes can be taught in English and Spanish for those diverse work forces and can be taught at your workplace or at our facility depending on client need. We offer standard 30 hour courses and special employer selected topic classes. The typical classes
more...
First Aid / CPR / AED
First Aid CPR and AED Workplace courses in English or Spanish. Red Cross certified courses done on your jobsite or in our classroom. Course modules are First Aid - 4 hours; CPR 3.5 Hours and AED 1.5 hours. Can be done separately as a single module or together as a single day module. Course can be broken down to one hour modules and done after work or on week ends based upon your working hours or
more...
From SafeTek USA
OSHA10
Recognized throughout the construction industry as a solid baseline of safety training, this 10-hour Outreach Training program meets the criteria outlined by OSHA s outreach training initiative. This program is ideal for all construction workers, including project managers and superintendents. Each worker who completes the course will receive a completion card from the Department of Labor.
more...
From HR Training University
OSHA 10 Hour Online Course (Outreach Training)
This course is designed for construction workers, foreman, job supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA. OSHA Completion card issued by the Dept. of Labor upon successful completion
more...
From Multi-media Access
Cranes, Chains, Slings and Hoists


The most important safety feature when working with cranes and other hoisting equipment is that the operator know how to inspect, maintain, and operate the equipment. This course covers these topics and more. Delivery formats include CD-ROM, LAN, WAN, Intranet, Internet. The course can be customized to meet your site-specific needs. It is currently available in English, but other language tracks
more...
Fall Protection


"Fall Protection" provides the information employees need to work safely when they are "off the ground", and satisfies the major training requirements in the OSHA Standard on Fall Protection. Delivery formats include CD-ROM, LAN, WAN, Intranet, Internet. The course can be customized to meet your site-specific needs. It is currently available in English, but other language tracks can be added.
more...
Hand and Power Tool Safety (Samax)


In this course, workers will learn how to safely work with hand and power tools. They will learn to use the correct tool for the job and never to substitute a makeshift or inferior tool. Workers will learn how to anticipate job hazards before they occur and the proper use of personal protective equipment. Some of the tools covered include striking, cutting, power, gas-powered and pressure
more...
Hand and Power Tool Safety (Digital-2000)


This course covers procedures to help reduce injuries when using hand and power tools. Delivery formats include CD-ROM, LAN, WAN, Intranet, Internet. The course can be customized to meet your site-specific needs. It is currently available in English, but other language tracks can be added.
more...
Ladder Safety


"Ladder Safety" is for all workers who use ladders, or should use ladders, on or off the job. Workers will learn the risks of using a substitute climbing device. This course teaches how to select the correct ladder for the job, how to prepare the ladder for safe use, safe climbing techniques, and general safe work habits when using a ladder. Delivery formats include CD-ROM, LAN, WAN, Intranet,
more...
From Envico LTD
SSSTS - Site Supervisor Safety Training Scheme
SSSTS - Site Supervisor Safety Training Scheme course has been designed to meet the needs of site supervisors within the construction industry. This course is for first line managers a those who have to, or are about to, acquire supervisory responsibilities. The course aims to highlight the need for risk assessment in the workplace, implementation of the necessary control measures and adequate
more...
SMSTS - Site Management Safety Training Scheme
SMSTS Objective
The SMSTS health and safety training course is one of the most highly regarded training courses within the construction industry available for site managers and supervisors, taken by more than 10, 000 people each year.
The SMSTS training course helps site managers (and anyone wanting to become a site manager) to develop a better understanding of the legal, moral and social
more...
SMSTS - Site Management Safety Training Scheme Refresher
SMSTS Refrehser course was introduced on 1 April 2002 as part of the Site Management Safety Training Scheme. All Site Management Safety Training Scheme (SMSTS) certificates issued after 1 January 2001 are valid for a five year period from the date of issue. The two day SMSTS refresher course will enable current SMSTS certificate holders to renew their qualification.
The SMSTS Refresher course
more...
NEBOSH Construction Certificate
NEBOSH Construction Certificate in Health and Safety is aimed at responsible people who make day to day decisions in the construction industry. The NEBOSH Construction Certificate provides them with a good foundation in safety management issues to ensure the health and safety implications of their decisions are properly taken into account.
This NEBOSH Construction Certificate is split into 3
more...
CCNSG Safety Passport
CCNSG Safety Passport scheme is designed to enable contractors to improve health, safety and environmental awareness. It will also benefit your company by reducing accident rates and incident related costs and putting a stop to repetitive health and safety inductions.
The CCNSG Safety Passport Scheme is a nationally recognised qualification. Many companies insist on personnel holding the CCNSG
more...
