Online 40 Cfr eLearning

Powered Industrial Truck Safety Powered Industrial Truck Safety This course is designed for personnel who work with or around a power-propelled truck (a.k.a. forklift) used to carry, push, pull, lift, stack, or tier materials. It will better familiarize the worker with the potential health and safety concerns associated with powered industrial trucks. The content in this course is designed to comply with the intent of the  more...

Lead Awareness Lead Awareness This course covers information mandated by OSHA 29 CFR 1910.1025. It provides general knowledge of the hazards associated with lead exposure and requirements to reduce or eliminate exposure. The content in this course is designed to comply with the intent of the applicable regulatory requirements. Learner objectives are to: identify sources of lead exposure, identify adverse  more...

Hazard Communication HAZWOPER Hazard Communication (HAZWOPER) This training discusses programs and procedures dealing with chemical hazards as stated in OSHA Regulation, 29 CFR 1910.1200, the Hazard Communication Standard. This training is geared toward employees who are actively involved in cleanup activities. The content in this course is designed to comply with the intent of the applicable regulatory requirements.  more...

DOT Hazardous Materials Transportation This course covers the fundamentals of shipping hazardous materials. Our 10 step approach encompasses all of the activities which must be addressed when preparing a hazardous material for shipment. This course has been updated to include recent changes to the regulations, including HM-215D.Note that we have set a 90 day access period to the course with further extensions up to 6 months if needed.  more...

Shipping Infectious Substances (IATA and DOT) This course covers the fundamentals of shipping hazardous materials, with an emphasis on infectious substances. Our 7 step approach encompasses all of the activities which must be addressed when preparing a hazardous material for shipment. This course has been updated to include recent changes to the regulations, including HM-215D. The course meets the requirements for training as specified in 49  more...

Shipping with Dry Ice This course, "Shipping with Dry Ice", has been designed with specific exercises related to the transportation of dry ice ("carbon dioxide, solid") by air from a shipper`s perspective. Our 10 step approach encompasses all of the activities which must be addressed when preparing dry ice for shipment by air. This course can be completed as quickly as you care to, depending on how much time you can  more...

RCRA and DOT Refresher ... hazardous waste, such as those requirements presented in 40 CFR 265.16, 40 CFR 264.16 and 40 CFR 262.34. It is also designed to assist with the recurring training requirements specified in 49 CFR 172 Subpart H, including testing of participants.Note that we have set a 90 day access period to the course with further extensions up to 6 months if needed. It is always a best practice to take your  more...

IATA Dangerous Goods "IATA Dangerous Goods Training" has been designed with specific exercises related to the transportation of dangerous goods by air from a shippers perspective. This course covers the fundamentals of shipping dangerous goods by air according to the IATA regulations. Our 10 step approach encompasses all of the activities which must be addressed when preparing a dangerous goods for shipment by air.  more...

IATA Productos Peligrosos "IATA Capacitacion de Productos Peligrosos" se ha dise ado con los ejercicios espec ficos relacionados con el transporte de productos peligrosos por el aire de una perspectiva de los expedidores. Este curso cubre los fundamentos de los productos peligrosos del env o por aire seg n las Regulaciones del IATA. Nuestro acercamiento de 10 pasos abarca todas las actividades que deben ser tratadas al  more...

Stack Sampling Methods 1-5 ...art 60 of the Code of Federal Regulations (referred to as 40 CFR 60). This course serves as an introduction to the methods and provides a basic understanding of the concepts, equipment, procedures and calculations used in the methods. Helpful hints and suggestions are also incorporated into the material. US-EPA Methods 1-5 are sampling methods developed for sampling of particulate emissions  more...

M ©todos de Muestreo de la Chimenea de EPA 1 - 5 ... 60 del C digo de las Regulaciones Federales (designadas 40 CFR 60). La Agencia de Protecci?n Ambiental de los E.E.U.U. (EPA) regula las emisiones de part?culas en el aire debido a las condiciones peligrosas que estas part?culas crean, induciendo problemas tales como enfermedad respiratoria, la lluvia ?cida, y el cambio del clima. M?todos 1-5 de EPA procedimientos del contorno para determinar  more...

RCRA Hazardous Waste Management for Generators ... hazardous waste, such as those requirements presented in 40 CFR 265.16, 40 CFR 264.16 and 40 CFR 262.34. Note that we have set a 90 day access period to the course with further extensions up to 6 months if needed. It is always a best practice to take your time and make sure that you understand each lesson in full detail. Complete in as little as 8 hours. The Hazardous Waste Management Online  more...

Cranes & Rigging The Cranes and Rigging safety course covers the topics included in OSHA 29 CFR 1926. 55 Subpart N. This self-paced, online training is intended for workers who want to learn more about cranes, derricks, hoists, elevators, and/ or conveyors. Topics include cranes & derricks, helicopters, base-mounted drum hoists, overhead hoists, conveyors, and aerial lifts. LEARNING OBJECTIVES: 1. Introduce  more...

29 CFR 1926 Subpart R Steel Erection This online course is designed to assist contractors, engineers and architects, and other safety personnel in understanding and complying with the new OSHA 29 CFR 1926 Subpart R, Steel Erection Standard. Attendees who should enroll in this seminar are those who are in any position of authority relating to any type of structural steel erection, including everyone from the crafts trade to  more...

Fall Protection Training The online Fall Protection course gives you a basic understanding about OSHA standard, 29 CFR 1926 500, and how it identifies areas or activities where fall protection is needed. It clarifies what an employer must do to provide fall protection for employees, such as identifying and evaluating fall hazards and providing training. Under the standard, employers are able to select fall protection  more...

Scaffolding Safety - en Espanol This online Spanish Scaffolding Safety course provides a general overview of safety measures that are required when working on a scaffold. The course introduces students to the various types of scaffolds, and goes on to outline the OSHA safety requirements & safety measures that can be taken to ensure that employees working on scaffolds are at little risk of injury or death. LEARNING  more...

OSHA 30 Hour for Construction - Online OSHA 30 Training The OSHA 30 Hour Construction Training course is a comprehensive safety program designed for anyone involved in the construction industry. Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by  more...

OSHA 30 Hour for General Industry - Online Training The OSHA 30 Hour Training is a comprehensive safety program designed for anyone involved in General Industry. Specifically devised for safety directors, field supervisors and foremen, the 30 Hour program provides complete information on OSHA compliance issues. OSHA recommends 10 and 30 Hour Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA  more...

OSHA 10 Hour for General Industry - Online OSHA Outreach Training The OSHA 10 Hour for General Industry training course serves as an employee introduction to OSHA and regulations that are applicable to health and safety in the workplace. OSHA recommends 10 and 30 Hour Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1910. Workers must receive additional training, when required by OSHA  more...

OSHA - 10 Hour Construction Outreach Training Program - Online The OSHA 10 Hour training for Construction is part of OSHA's Outreach Program to train workers in the basics of occupational safety and health. The 10 hour course is geared to the general laborer and new hires and serves as a safety orientation for work on a construction site. In this course, students will be introduced to the basic safe practices of identifying, reducing, eliminating and  more...

Confined Spaces The online Confined Space safety course reviews the OSHA safety regulations contained in 29 CFR 1926. 21. Confined space safety training is applicable to workers working in permit required confined spaces. It instructs about the hazards that may occur during the work in confined spaces. LEARNING OBJECTIVES: Have an Introduction to Confined Spaces Learn the  more...

OSHA 30 Hour Construction Outreach Training - Online The OSHA 30 Hour training is part of OSHA's Outreach Program to train workers in the basics of occupational safety and health. In this course, students will be introduced to the basic safe practices of identifying, reducing, eliminating and reporting hazards commonly found on a construction work site. New to the OSHA 30 Hour program is the 2010 addition of "Introduction to OSHA". This is a  more...

OSHA Excavation Safety Training - en Espanol The online Spanish Excavation Safety training course gives the Spanish-speaking construction worker a basic understanding of how to work safely in and around excavations, protective systems, and important points to consider when working in an excavation. LEARNING OBJECTIVES: Identify factors that pose a hazard to employees working in excavations Learn how to protect employees from  more...

Bill Judges DOT 6060 Supervisor Drug and Alcohol Awareness Training - online The DOT 6060 Supervisor Drug and Alcohol Awareness online course features Bill Judge, a nationally known DOT Drug Law Expert. This course is designed to help you meet the Department of Transportation's training requirements for supervisors of covered safety-sensitive employees as described in 49 CFR Part 40. The training materials address reasonable suspicion as a performance issue, and as  more...

DOT HAZMAT General Awareness - Online Training The online DOT HAZMAT General Awareness course is designed to provide you the basic information about hazardous materials and Hazardous Material Regulations (HMR). After completing this course, you will be able to determine the required shipping documents and other necessary requirements of dealing with the hazardous material. Note - The US Department of Transportation (DOT) Regulations 49 CFR  more...

HAZWOPER 24 Hour Training - Online The HAZWOPER 24 Hour training applies to the "Occasional Site Worker" on a controlled or hazardous waste site. OSHA's Regulation 29 CFR 1910 120(e) stipulates that 24 hours of safety training are required for individuals who work on or visit a controlled or hazardous site and have little or no chance of exposure to the wastes involved. Examples of an Occasional Site Worker would include truck  more...

DOT HAZMAT General Awareness - Online The DOT HAZMAT General Awareness course is designed to provide you the basic information about hazardous materials and Hazardous Material Regulations (HMR). DOT Regulations 49 CFR 172 700, requires training for anyone who handles hazardous materials including individuals who ship or receive hazardous materials, prepare hazardous materials for transportation, mark and label containers, complete  more...

HAZWOPER 8 Hour Refresher with Blood Borne Pathogens Module The onlne HAZWOPER 8 Hour Refresher course meets the requirements in OSHA regulations 29 CFR 1910. 120 for eight hours of annual refresher training for workers at hazardous waste sites. This course is designed for general site workers who remove hazardous waste or who are exposed or potentially exposed to hazardous substances or health hazards. Topics include Hazardous Waste Operations and  more...

HAZWOPER 8 Hour Refresher - online training The HAZWOPER 8 Hour Refresher training course meets the requirements in OSHA 29 CFR 1910 120 for eight hours of annual refresher training for workers at hazardous waste sites. This course is designed for general site workers who remove hazardous waste or who are exposed or potentially exposed to hazardous substances or health hazards. Topics include HAZWOPER regulations, safety and health  more...

Hazard Communication The Hazard Communications Standard is outlined by OSHA under 29 CFR 1910. 1200. This OSHA Standard, more commonly known as HAZCOM, provides information to workers and employers about various chemical hazards that exist in the workplace, and what protective measures they can take in order to prevent the adverse effects of such hazards. This self-paced, online course gives you a basic  more...

Industrial Hygiene The Industrial Hygiene training course focuses on the aspects of OSHA 1910 Subpart Z which deal with keeping hazardous chemicals and materials from negatively affecting your health. This includes the use of personal protective equipment (PPE), cleaning procedures in the event of exposure to hazardous materials, and the procedures in place for conducting first aid and recording an incident of  more...

HAZWOPER 40 Hour Initial Training The 40-Hour HAZWOPER course is specifically designed for workers who are involved in clean-up operations, voluntary clean-up operations, emergency response operations, and storage, disposal, or treatment of hazardous substances or uncontrolled hazardous waste sites. The HAZWOPER course covers topics included in 29 CFR 1910 120. Topics discussed include protection against hazardous chemicals,  more...

General Safety Health Provisions - en Espanol This online Spanish safety course provides an overview of the OSHA standard for General Safety and Health Provisions (OSHA 29 CFR 1926 Subpart C). Topics covered in this course include safety training and education, first aid, fire protection, as well as employee emergency action plans. LEARNING OBJECTIVES: - Know the responsibilities of the employer and employee in the workplace - Know  more...

Excavation Safety Cave-ins are considered the most dangerous trench and excavation hazard. In addition, other potentially fatal hazards also exist in excavations, such as asphyxiation due to lack of oxygen in a confined space, inhalation of toxic fumes, drowning, falls, water accumulation, etc. The OSHA standards, 29 CFR 1926. 650, intend to protect workers in trenches and excavations. This course gives you a basic  more...

Cranes and Rigging - en Espanol Course Cost: $20. 00 Course Duration: 1 hour Course Enrollment: http://bit. ly/ 4TFsSG The online Cranes and Rigging Safety course in Spanish is intended for Spanish-speaking construction workers who want to learn more about cranes, derricks, hoists, elevators, and/ or conveyors. Topics include cranes & derricks, helicopters, base-mounted drum hoists, overhead hoists, conveyors, and aerial  more...

Stairways and Ladders - en Espanol The online Stairways and Ladders safety course is designed to give the Spanish-speaking student an understanding of OSHA standards found in 29 CFR 1926. 1050 and their role in the prevention and elimination of work-related injuries and fatalities due to stairways and ladders in the workplace. LEARNING OBJECTIVES: - Understand OSHA standards related to stairways and ladders - Find out  more...

OSHA Concrete and Masonry Safety - en Espanol The online, self-paced OSHA Concrete and Masonry safety course is designed for the Hispanic construction workers who want to learn about precautions and dangers that come from concrete and masonry projects. Topics include general requirements, cast-in-place concrete, and masonry construction. This course covers the topics included in the OSHA Construction Standards, 29 CFR 1926. 700, Subpart Q.  more...

Welding and Cutting Course Cost: $20. 00 Course Duration: 1 Hour The online, self-paced Welding and Cutting safety course discusses the two most common types of welding and cutting (gas and arc), the dangers that are involved in working with them, and the safety measures, according to OSHA 29 CFR 1926. 350, that can be undertaken to minimize and prevent the occurrence of their associated hazards. The course  more...

Stairways and Ladders The online, self-paced Stairways and Ladders safety course gives students an understanding of OSHA Construction Standard 29 CFR 1926. 1050 Subpart X. OSHA's Stairways and Ladder regulations gives insight into safe work practices to assist in preventing workplace accidents and fatalities. LEARNING OBJECTIVES: - Understand OSHA standard, 29 CFR 1926. 150 Subpart X, related to stairways and  more...

Concrete and Masonry Safety Cost: $20. 00 Time Duration: 1 Hour The Concrete and Masonry Safety is a self-paced, online training course designed for construction workers who want to learn about common hazards found on concrete and masonry projects. Students will learn common-sense hazard assessment and precautions to use in order to avoid injury. Topics include general requirements, cast-in-place concrete, and masonry  more...

Spanish - Fire Protection The online Fire Protection safety training course, in Spanish, teaches the Spanish-speaking student to identify different types of fires, fire extinguishers, fire prevention techniques and safety measures. The course also discusses OSHA requirements for evacuation plans, storage of flammable and combustible materials and other fire hazards. This course is intended for the construction site  more...

Crime Scene Cleaners Training Academy Students will gain a wealth of knowledge with this comprehensive Online Virtual WBT (Web Based Training) Module as well as actual Hands-On Training either in a Mock-Up scenario or out on actual incidents. Students will receive the following course package: * CTS Decontamination Specialist Training * 40 Hour HAZWOPER Training 29 CFR 1910. 120(e) * HAZCOM 29 CFR 1910. 1200  more...

Stimulus Package On-Line Training (NO HANDS-ON) CTS Decon Unltd. Stimulus Package $1556. 70 "NO HANDS-ON TRAINING" Students will gain a wealth of knowledge with this comprehensive Online Virtual WBT (Web Based Training) Module. Students will receive the following course package: * CTS Decontamination Specialist Training * 40 Hour HAZWOPER Training 29 CFR 1910. 120(e) * HAZCOM 29 CFR 1910. 1200 * HAZMAT 49 CFR parts  more...