Instructor Led About This Course Training

Master in Computer Applicatin augmented by Network Engineering This Master program is designed to make the candidate more industry relevant rather than pure academic. For this purpose, this course is designed under two platforms i. e. the Academic and Industrial The course duration is about 3 years for those who are not from a technology related graduation program. If the student is from a computer / technology background, then the course is only for two  more...

Foundation Course in Network Engineering This program is basic network engineering program, primarily focussing on the fundamentals of networking domain. Here the students and given an introduction to the network engineering domain and the dunamental concepts are explained. Here the candidate is taught on peer to peer networking, networking history, crimping, testing etc. This course is designed to provide a strong foundation in  more...

J-STD-001 HAND SOLDERING - IPC CERTIFICATION -- A comprehensive, hands-on solder training and certification program based on the J-STD-001 book. This course gives companies and individuals all the knowledge they need to increase employee skills and performance. The course includes understanding the workmanship standards found in the J-STD-001 book and a healthy dose of hands-on soldering training.  more...

Soldering 101 Basic soldering skills for the beginner. Includes class and hands-on lab. Includes Safety, basic soldering techniques, soldering to terminals, soldering PTH parts in circuit board, soldering SMT parts onto circuit board. Includes STM certificate. IPC-A-610 workmanship standards are referred to, but are not the main element of this course. (For a full 4-day IPC-A-610 course contact  more...

Oil and Gas 24 Hour Hazard Recognition - Denver, CO The Oil and Gas 24 Hour Hazard Recognition is a 3 day training program held in Denver, Colorado. This course was developed as a helath and safety orientation for the Oil & Gas entry level person and support personnel. The course gives students an overview of pertinent OSHA Construction and General Industry regulations and how they apply to the Oil and Gas Industry. Discussion will concentrate on  more...

Basics of Hazardous Material Management The Basics of Hazardous Materials Management course is an excellent introductory level course for regulatory compliance with RCRA, Sara Title 111, DOT, Fire Code, OSHA, EPA, and State requirements for the basics of storage and compatibility of hazardous materials. Includes the basics of HAZCOM, HMIS, Teir 11 inventory and reporting, and HMMP planning. This course was developed for the facility  more...

Safety Manager Training - Denver, CO The Safety Manager Course is designed for anyone with the responsibilities of workplace health and safety. This might include safety committees, safety managers, facility managers, or the Company Managers. The Safety Manager course teaches students the applicability of OSHA regulations and the importance of a comprehensive safety management system. The course is a one day, Instructor-Led training  more...

DOT HAZMAT Shipping - Denver, CO The HAZMAT Shipping course is the required training for any employee who handles hazardous materials including individuals who ship or receive hazardous materials, prepare hazardous materials for transportation, mark and label containers, complete shipping documents, select packaging, and the loading or unloading of hazardous materials. This course is designed to meet the training requirements as  more...

Trenching and Excavation Safety, Denver, CO The Trenching/ Excavation Safety Course is a "Competent Person" level training course that details the requirements for training found under OSHA standard 29 CFR 1926. 650 Subpart P. This training is applicable to all those working in & around excavations and trenches. The Excavation and Trenching course is Instructor led training and takes place in Denver, Colorado. The Trenching/ Excavation  more...

Denver, CO - Confined Space Training Hazmat Plans & Programs Confined Space training is a "Competent Level" Course. This safety course covers OSHA's requirements for Confined Space Safety found under 29 CFR 1926 21 and Permit-Required Confined Space, 29 CFR 1910 146. The Confined Space course is Instructor-led and takes place in Denver, Colorado. - - - - - - Confined Space training outcomes - students will become  more...

OSHA 30 Hour Training for General Industry - Denver, CO The OSHA 30 Hr. course teaches students the recommended best safe work practices as required under OSHA Standards for General Industry found under 29 CFR 1910. The training will provide your employees with the knowledge and tools for recognizing and mitigating the hazards most commonly found in your facility or job-site operations. The 30 Hour training is a four day Instructor-led OSHA Outreach  more...

Safety Manager Training Course The Safety Manager training course is intended for the entry-level Safety Manager or Facilities Manager who is assigned the duty of overseeing workplace health and safety. This training program will introduce the student to the applicable OSHA standards (Health and Safety Programs, Recordkeeping, etc.) and provide insight on how to achieve or maintain OSHA compliance through effective safety  more...

Explosives Safety for Contractor DOD 4145 26M Compliance - Denver, CO The Explosives Safety Compliance course was developed to assist DOD contractors in meeting the safety and reporting requirements of DOD 4145 26M. If you are a manufacturer of munitions and explosives, this is the training you will need to be in compliance with DOD 4145-26M. Cost: $1450 Class Date: October 22nd - 26th, 2012 Location: Denver, CO - - - - - - - - - The DOD Explosives  more...

Denver, CO - OSHA 30 Hour Construction Training June National Safety Month Training Special on OSHA 30 Hour Training! - - - - - - - - - - The OSHA 30 Hour course teaches students the recommended best safe work practices as required under OSHA Construction Standards, 29 CFR 1926. This training will provide your employees the knowledge and tools for recognizing and mitigating hazards most commonly found on a construction site. All  more...

HAZWOPER 24 Hour Training, Denver, CO - Instructor Led Hazmat Plans & Programs 24-Hour HAZWOPER course is the training required by OSHA 29 CFR 1910 120 for the "Occasional Site Worker" on a hazardous waste site. If you are looking for 24 Hr certification, this is the course you will need. The HAZWOPER 24 Hour is an instructor-led three day class held in Denver, Colorado. Note: OSHA considers an "Occasional Site Worker" to be any worker whose job  more...

HAZWOPER 8 Hour Refresher, Denver, CO HAZMAT Plans & Programs' 8 Hour HAZWOPER (Hazardous Waste Operations & Emergency Response) training course satisfies OSHA's requirement for eight hours annual training as mandated by OSHA 29 CFR 1920 120. The focus of this course changes yearly to reflect trends and practices, regulatory updates and timely topics. The 8 Hour Refresher course is Instructor-Led and takes place in Denver, Colorado.  more...

HAZWOPER 40 Hour Training, Instructor Led Training in Denver, CO The 40 Hour HAZWOPER course is the initial training required by OSHA 29 CFR 1910 120 for workers on a hazardous waste site. The HAZWOPER Training includes both classroom instruction and a hands-on HAZMAT emergency response exercise. The 40 Hour HAZWOPER training course takes place over five 8 hours days in our training classroom located in Denver, Colorado. Who Should Take the HAZWOPER 40  more...

ASQ Lean Six Sigma Green Belt ' This program is designed for Participants typically come from finance, quality and business operations staff functions. Many have direct intervention as process owners or stakeholders. Learn how to function as a ?tools application? member of a six sigma team. Lead and execute process-level improvement projects. Collect process data and develop process maps. Develop statistical hypotheses  more...

ASQ Certified Manager of Quality Organizational Excellence Refresher ' This program is designed for Individuals who desire to reinforce their skills, knowledge, and capacity to understand the Certified Manager of Quality / Organizational Excellence Body of Knowledge in preparation for taking the ASQ Certified Manager of Quality / Organizational Excellence Examination. CEUs available: 1.9 Practice test testing skills. Review the Body of Knowledge for the ASQ  more...

CPSM Certification Preparation Course CPSM Certification Equals Results a The CPSM certification tells the world you are a professional in a core function of every organization. Certified Professionals earn 23% more than those without the certification. The Institute for Supply Management stated that a 2. 5% reduction in procurement costs produces the same amount of profit as a 10% increase in sales. We want to help you earn the  more...

CPSM Certification Bridge Exam Preparation Course For those with the Certified Procurement Manager (CPM) designation, this 2-day course prepares participants for success on the Bridge Exam of the Certified Professional in Supply Management offered by the Institute for Supply Management. CPSM Certification Courses - CPSM Bridge Exam 2-Day Review For Bridge Exam a I passed the CPSM Certification Tests in less than 30 days using the  more...

CPSM Exam Prep for Exam 1 - Foundation of Supply Management This 1-day course prepares participants for success on Exam #1 of the Certified Professional in Supply Management Program offered by the Institute for Supply Management. The course covers the foundations of supply management including contracting and negotiation, cost and finance, international business, social responsibility, sourcing, and supplier relationship management. Each of these areas  more...

CPSM Exam Prep for Exam 3 - Leadership in Supply Management This 1-day course prepares participants for success on Exam #3 of the Certified Professional In Supply Management offered by the Institute for Supply Management. This course covers leadership, risk and compliance, and strategic sourcing. These topics are covered in-depth and are critical to making supply chain management a strategic part of any organizationa ™s business operations.  more...

CPSM Exam Prep for Exam 2 - Effective Supply Management Performance This 1-day course prepares participants for success on Exam #2 of the Certified Professional in Supply Management Program offered by the Institute for Supply Management. The course covers forecasting, logistics, materials and inventory management, organization assessment, planning, product development, project management, and quality. Each of these areas enables effective management of the supply  more...

1 to 1 Professional Coaching - Sales, Presentations, Supervisory Skills If you get frustrated in large training sessions because (1) you can't focus on your specific issues, or (2) because you wait all day for that one kernel of information that will help you or if (3) you get intimidated practicing in front of large groups...try 1 to 1 Professional Coaching. Our professional trainers/ businesspeople can coach you on your process, your products, your employee issues  more...

Target Learning for Students In this program, students will learn how to apply a variety of flexible (and proven) reading and study strategies using your own preferred learning and thinking style. Keep in mind, this is not a gimmick course, these techniques do require practice. Fortunately, we make certain you have plenty of time during each class session to get the hands-on experience to become proficient with these learning  more...

Computing Salaries, Wages, and Benefits Course Description: This course aims to provide participants with a functional knowledge of computing compensation and administering both legally mandated (e. g. SSS, Philhealth, Pag-ibig) as well as company initiated benefits. The details of each of these benefits will be discussed in-depth. Lastly, actual sample policies on some of these benefits will be shared with the participants to enable  more...

Events Management Business Seminar in the Philippines Overview Events management is one of the best business opportunities for the aspiring entrepreneur. Needing only a small capital, this creative and exciting venture has the potential for unlimited income. This excellent events management course is also highly recommended for those who are tasked by companies to organize their in-house events. Objectives a To learn events planning and  more...

Effective Collection Management and Strategies The course contains very relevant and practical scenarios on collection of receivables and negotiation. It is designed to challenge the creativity and resourcefulness of collection specialists. It can be used to train new collectors and at the same time serve as a refresher course for the more experienced workers. This course is highly recommended for any company or individual involved in the  more...

Heating Ventilating and Air-conditioning HVAC System Design and Value Engineering Postgraduate Diploma in Heating, Ventilating and Air-conditioning (HVAC): System Design and Value Engineering Programme Organisation This Programme is divided into 2 Distinct Courses, making it possible for participants to select desired modular sets, each of which provides the Award of Diploma a Postgraduate. The two courses, comprising the programme, lead to Postgraduate Diploma in  more...

Training the Trainers Seminar-Workshop Introduction Proper training is the most cost effective way to increase productivity and improve your bottom line. Make sure that the people in charge of training your personnel are themselves well trained. Although this program is designed primarily as a basic guide for new trainers, it is also useful for veterans in the profession as a refresher course and to update their skills.  more...

Human Resource Management Human resouce management is a vital function in every company and this concise course spans its broad scope. Important concepts and their application will be discussed along with the relevant laws dealing with employment. Organizational development will also be tackled along with talent and career management of employees to maximize your manpower resource.  more...

Team Dynamics Team Leadership 1. Course Objectives By the end of this presentation and its related activities, you will be able to: - Distinguish between groups and mere aggregations - Suggest the difference in interpretation of groups and teams - Demonstrate your understanding of the social and psychological relevance of the stages of formation of a group - Distinguish between task forces, committees, command  more...

Small Business Start-Up Expansion and Management 2 Course Objectives Operational Costing Issues (2) At the conclusion of the specified learning and development activities included in this course, delegates will be able to: - Cost a Human Resourcea ™; - Integrate Fixed and Variable Costs; - a Cost Apportiona ™ - Factor a Accounting for Depreciationa ™ in a Cost Apportioninga ™; - Calculate Projected Sales and a  more...

Small Business Start-Up Expansion and Management 1 OBJECTIVES: At the conclusion of the specified learning and development activities included in this course, delegates will be able to: - Demonstrate a heightened understanding of the distinguishing factors of Industrial and Consumer Products, respectively; - Illustrate their internalisation of the need to establish the Industrial or Consumer Sector and sub-sectors that are to be targeted;  more...

SAP and Joint Venture Accounting Training methodology The seminar provides the conceptual framework and theoretical background to some key areas of financial management and decision making, which are put into a real world context by providing a practical a toolkita ™ of financial techniques. It includes many worked examples and case studies of real companies relating to each of the topics covered. Delegates are therefore  more...

Corporate Governance Principles and Practice A. COURSE OBJECTIVES: 1. Functions of Management: An Introduction At the conclusion of the specified learning and development activities included in this course, delegates will be able to: - Accurately profile managers at different organisational levels - Outline, with examples, the planning process, as it applies to different organisational levels - Outline the planning  more...

Corporate Governance and Strategic Management A. COURSE OBJECTIVES: 1. Functions of Management: An Introduction At the conclusion of the specified learning and development activities included in this course, delegates will be able to: - Accurately profile managers at different organisational levels - Outline, with examples, the planning process, as it applies to different organisational levels - Outline the planning  more...

Communication Information Gathering Analysis and Report Writing A. COURSE OBJECTIVES A. 1. Use of English By the end of the specified Learning and development activities, delegates will be able to: - Demonstrate their ability to spell unusual words - Demonstrate their Mastery of the English a Peculiarsa ™ - Identify words with silent consonants, reflecting this factor in their spelling - Demonstrate their ability to  more...

EPCIC Contract Management Essential Elements of International Contract Laws EPCIC Contract Management Essential Elements of I In the Energy construction and procurement business, the success of your project is dependent on your practical a know howa in contract management. Understanding the essential ingredients of contracts and mastering the fundamentals will equip you to identify vague contracts, avoid dangerous and often hidden terms, and better understand your position and your project. PetroEdge has  more...

Upstream Joint Venture Accounting Analysis Audit 28 30 May 2012 Kuala Lumpur About this training course This comprehensive training course is split into three main topic headings, and will raise your knowledge and understanding of E&P finance and accounting through industry-specific examinations of current international practices and developments in financial accounting, joint-venture and production-sharing accounting and auditing. Course highlights By attending this  more...

How to Interpret multi - well Pressure Depth Plots from DSTs RFTs and Hydrodynamics 28 May 1 June 2012 Perth About this training course This 5 day intensive training course will show participants how to use pressure data from DSTa ™s, Wire-line Tests (such as RFTa ™s & MDTa ™s) & production Tests ( from many different wells) to make Pressure/ Depth Plots which reveal permeability barriers such as pinch-outs, sealing faults & any barrier which can trap hydrocarbons. It will also  more...

Drilling Essentials for New Engineers and Non-Technical Professionals in Oil Gas 21 22 May 2012 Brisbane Australia International industry veteran with over 30 years of field and business experience in upstream Oil & Gas. Franz has gained his near thirty year experience in the Oil and Gas Drilling Industry around onshore and off shore facilities in Australia, the North Sea, Middle East, USA, Europe & Asia. He has experience in nearly every position around the rigs, including; roustabout, roughneck, derrick man,  more...

AVO Attributes Inversion Principles Applications 28 May 1 June 2012 Kuala Lumpur Malaysia This course provides an understanding of the evolving role of seismic petrophysics through the use of amplitude variations with offset or angle (AVO/ AVA), attributes, and inversion techniques. Understanding rock physics and the behavior of the propagating seismic waves represents an integral part of the course, especially in the context of specific applications including enhanced seismic  more...

Introduction to Offshore Drilling and Production Facilities 23 26 April 2012 Kuala Lumpur Malaysia This 4 day (separately bookable) intensive training course will cover the details of drilling rigs and how they operate, especially for deepwater activities. Current drilling rigs are highly automated and efficient. These advances will be illustrated with animations and videos. The relationship between drilling and production will be explored with examples of current field developments The  more...

Well Integrity Management 23 - 26 April 2012 Kuala Lumpur This intensive four-day course is designed to provide participants with a thorough knowledge of well integrity management and risk assessment in producing assets. Based on the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the oil and gas industry. When to take action with a well is a critical  more...

Production Technology for Non-Production Engineers 23-27 April 2012 Kuala Lumpur About this training course A decision to drill an exploration well with the objective to find a new oil or gas field must be based on a sound assessment of the prospect's risks and of the volumes: - what is the chance that a well will find hydrocarbons, and - how much could it be? Risk and volume assessments form the basis for decisions to drill a well or not, and as such form the link  more...

Production Technology for Non-Production Engineers 23-27 April 2012 Kuala Lumpur In this 5 day training course, the core functions and activities within Production Technology will be addressed and made clear to Non-production professionals working with the Exploration & Production value chain. The program is designed to give Nonproduction professionals the basic knowledge of this engineering discipline in order to improve their communication among the  more...

Budgeting and Forecasting in Oil and Gas 23- 25 April 2012 To stay on top, Oil & Gas companies must constantly re-examine the budgeting and forecasting models they use in their decision making processes to ensure they are up-to-date and incorporate the latest in budgeting and forecasting best practices. Is there an opportunity to expand take advantage of the stronger price of Oil? Where can technology costs be optimised? How does a drop of 10% in oil  more...

Interpreting and Managing Charterparty for Supply Veessels 23-25 April 2012 OSV Owners and the Charterers engage in very complex and high risk ventures with the prime objective of maximizing returns and minimization of risks. There is no benefit for either Party to be entangled in commercial or contractual disputes. But due to the abundance of uncertaintiesa ™ in the Offshore E & P business, priorities of the parties may differ, giving rise to conflicts. Conflicts  more...

Advanced Turnaround Shutdown and Outage Management with Tom Lenahan 23 - 25 April 2012 A 3 day training course derived from the Turnaround Model of Excellence developed by practitioners that guarantee the reliability of your operations. The course six modules develop and expand the basic ideas of the Model of excellence and introduce some new concepts to further enhance performance. The aim of the course is to expand the knowledge and give new insights on Turnaround Management to  more...

Technical Report Writing Presentation Skills For Oil and Gas Professionals 19 21 March 2012 Miri Sarawak Oil & Gas professionals increasingly need to translate complex findings, analysis and recommendations for effective decision making. If you a face challenges in getting your findings into paper and presenting it effectively, you will benefit from this 3-day training course: EFFECTIVE TECHNICAL REPORT WRITING FOR OIL & GAS PROFESSIONALS a Write and turn-around accurate technical documents  more...

PETROLEUM RISK ANALYSIS PORTFOLIO MANAGEMENT 12 14 March 2012 Kuala Lumpur Malaysia Course Introduction Risk and uncertainty are fundamentally embedded in the exploration and production business a arguably there is no business development without risk a yet the distinction between risk and uncertainty is often confused, and attempts to effectively manage risk and uncertainty are often poor in the industry. This 3 day course offers attendees the opportunity to explore  more...

Introduction to Offshore Drilling Floating Production Facilities 21 22 March 2012 Beijing China Course Overview This 2 day intensive training course will cover the details of drilling rigs and how they operate. As current drilling rigs are highly automated and efficient, these advances will be illustrated with animations and videos. The relationship between drilling and production will be explored with examples of current field developments. The course also covers offshore production  more...

HPHT WELL ENGINEERING 19 23 March 2012 Kuala Lumpur Malaysia Training Course Overview Conventional HPHT (High Pressure - High Temperature) conditions (>10, 000 psi and 300 F) are becoming routine drilling targets in many basins worldwide, as exploration and production examine deeper and hotter objectives. This course will equip participants with knowledge and skills of HPHT well engineering and the components required for well planning and issues  more...

How to Interpret Multi-well Pressure vs Depth Plots Pressure Maps from DST Wire-line Formation Test WFT data 5 9 March 201 bout this training course This 5 day intensive training course will show participants how to use pressure data from DSTa ™s, Wire-line Tests (such as RFTa ™s & MDTa ™s) & production Tests,( from many different wells) to make Pressure/ Depth Plots which reveal permeability barriers such as pinch-outs, sealing faults & any barrier which can trap hydrocarbons. It will also  more...

DEEPWATER WELL ENGINEERING 26 30 March 2012 Kuala Lumpur Malaysia Training Course Overview This 5 day training course examines the difficulties, challenges facing todaya ™s deepwater drilling programme designers and personnel where wells are being drilled in increasingly difficult downhole and environmental conditions. Ever increasing cost and legislation further contribute to design and operational pressures. From this training course, you will have  more...

How to Interpret Multi-well Pressure vs Depth Plots Pressure Maps from DST Wire-line Formation Test WFT data 12 16 March 2 About this training course This 5 day intensive training course will show participants how to use pressure data from DSTa ™s, Wire-line Tests (such as RFTa ™s & MDTa ™s) & production Tests,( from many different wells) to make Pressure/ Depth Plots which reveal permeability barriers such as pinch-outs, sealing faults & any barrier which can trap hydrocarbons. It will also  more...

Drilling Essentials For New Engineers Non-Technical Professionals 26 27 March 2012 KL Malaysia Gain an overview of drilling procedures, the terminology used, its cost components and the latest technological developments driving this activity By attending this 2-day industry fundamentals training course, you will better able to: Understand drilling terminology & drilling processes for completing onshore & offshore wells Appreciate major cost components of drilling operations  more...

DRILLING ESSENTIALS FOR NEW ENGINEERS NON-TECHNICAL PROFESSIONALS 20-21 March 2012 Beijing China Gain an overview of drilling procedures, the terminology used, its cost components and the latest technological developments driving this activity By attending this 2-day industry fundamentals training course, you will better able to: Understand drilling terminology & drilling processes for completing onshore & offshore wells Appreciate major cost components of drilling operations  more...

Applied EOR Technology Project Management 26 29 March 2012 Kuala Lumpur Malaysia This 4 day training course addresses the relevance and basic concepts of various EOR techniques. It will explain how any EOR technology can be integrated in the full life cycle planning, starting from the current development concept, through appropriate testing to field implementation of a EOR Scheme. The application of EOR technology demands strong coordination between many disciplines and  more...

PROJECT MANAGEMENT for Oil Gas Professionals 27 29 February 2012 Kuala Lumpur Malaysia About this training course At present, project managers in the oil and gas industry have to make decisions in an environment of high levels of uncertainty and risk. This interactive3-day course will equip you with the skills and knowledge to deliver successful projects, within budget, to deadline and of sound business value. Case histories and examples of projects will provide you with  more...

Fractured Reservoir Characterisation 27-29 February 2012 Kuala Lumpur Malaysia 2nd run in Asia This course provides a practical, integrated approach to characterising and modelling natural fractures where they are important for hydrocarbon delivery. Fractured reservoirs often display highly heterogeneous dynamic behaviour that is difficult to capture using standard reservoir modelling workflows. This course addresses all the relevant aspects of characterising and modelling fractured  more...

OSV Chartering Charterparty Management with Essential Elements of Maritime Laws 27 February - 2 March 2012 In the Offshore Oil & Gas industry, field development, hook-up and production activities are dependent on the reliable availability of a fleet of Offshore Support Vessels (OSV). Not only is the availability of OSVa ™s important, but expertise and a know howa in C/ P and or contract management is equally crucial. Understanding the essential ingredients of contracts and mastering the  more...

LNG Markets Spot Trading 20 - 21 Feb 2012 Singapore The LNG market is developing from a market based fully on long-term contracts, to a more flexible market based on a portfolio of contracts of different durations. The changes in the market, combined with increased demand are creating a base for a more flexible market, where the LNG spot market will be playing a role. The changes in the market can be identified in the following areas: development  more...

Introduction to Oil Gas Exploration Production For New Engineers Non-Technical Professionals 12-13 DECEMBER 2011 KUALA LUM By attending this 2-day industry fundamentals training course, you will better able to: - Appreciate the dynamics of world energy demand & supply and its impact on pricing - Understand the formation of petroleum reservoirs and basic geological considerations - Examine the exploration process to gain an overview of the technical processes involved - Gain a comprehensive overview of drilling  more...

9th run in Malaysia Revised Content EPCIC Contract Management Essential Elements of International Contract Law 13 15 Decemb In the Oil & Gas construction and procurement business, the success of your project is dependent on your practical a know howa in contract management. Understanding the essential ingredients of contracts and mastering the fundamentals will equip you to identify vague contracts, avoid dangerous and often hidden terms, and better understand your position and your project. PetroEdge has  more...

Introduction to Oil Gas Exploration Production For New Engineers Non-Technical Professionals 12-13 DECEMBER 2011 KUALA LUM By attending this 2-day industry fundamentals training course, you will better able to: - Appreciate the dynamics of world energy demand & supply and its impact on pricing - Understand the formation of petroleum reservoirs and basic geological considerations - Examine the exploration process to gain an overview of the technical processes involved - Gain a comprehensive overview of drilling  more...

Engineering of Subsea Production Systems 5 7 December 2011 Kuala Lumpur Malaysia This concise course is well balanced and based on more than 30 years of true project experience in Shallow and Deep Water fields around the world, from concept evaluation to first production. It is designed for Project Managers, Project Engineers, experienced or new to Subsea & highly suitable for Cost, Planning, Offshore Installation and Offshore Operation Engineers. All the Lectures  more...

Effective Plant Turnaround Management Optimising your Turnaround Management Strategy to Exceed Safety Quality Time and Cost Targ Turnarounds are complex projects that have a substantial impact on business performance. It is therefore imperative that the people who plan, prepare and execute Turnaround have an the in-depth skill and knowledge necessary to produce a successful outcome and an understanding of how Turnarounds work, why they sometimes dona ™t and what to do if they start going wrong. This complex,  more...

Gas LNG Contract Negotiations 5 - 7 DECEMBER 2011 SINGAPORE Energy is the worlda ™s biggest industry. It shapes the destiny of countries, peoples and companies. The 21st Century has been dubbed the a Gas Centurya because of the future dominance of gas in future energy expansion. This course starts with concise teaching sessions which explain how natural gas and LNG have come to be so important, and how these businesses work a these sessions will  more...

COMPLETIONS Equipment Applications Types Installation Workovers 16 18 January 2012 Kuala Lumpur This intensive three-day course is designed to provide participants with a thorough knowledge of completion equipment and operational procedures required for converting a drilled well into an efficient and safe producer. It follows a practical approach for the various completion types, specific applications, completion installation and workovers.  more...

Negotiation Skills Techniques for Engineers and Technical Professionals 19-20 January 2011 Kuala Lumpur Many technical experts find it difficult to move out of their expertise areas and deal with commercial matters. Negotiating to optimise business value is a step further from their comfort zones. All too often negotiations are then left to finance personnel. They bring many strengths to the table but an understanding of engineering trade-offs is not one of them. By attending this course  more...

Drilling Essentails for New Engineers and Non-Technicals Professionals in Oil Gas 30-31 January 2012 Miri Sarawak Gain an overview of drilling procedures, the terminology used, its cost components and the latest technological developments driving this activity By attending this 2-day industry fundamentals training course, you will better able to: Understand drilling terminology & drilling processes for completing onshore & offshore wells Appreciate major cost components of drilling operations and  more...

Writing Effective Standard Operating Procedures for Oil Gas Professionals Engineers 19 20 January 2012 Kuala Lumpur Malaysia A Standard Operating Procedure (SOP) is a set of instructions having the force of a directive, covering those features of operations that lend themselves to a definite or standardized procedure without loss of effectiveness. The presence of these quality documents is essential when inspections take place since the most frequent reported deficiencies during inspections are the lack of written SOPs  more...

Clastic Exploration Reservoir Sedimentology This course has been developed to provide an understanding of the geometry and hydrocarbon potential of clastic depositional systems and facies, and how they are affected by such important features as basin configuration, tectonics and eustasy. Each of the major clastic environments is covered in terms of lithology, facies, log response and reservoir quality and the depositional models related to  more...

Subsea Pipeline Engineering with Andrew Palmer Roger King Subsea pipelines are the arteries of the offshore industry, and around the world more than 18, 000km are in service. Part of almost every project, they often form a large component of project cost. This course will provide a complete and up-to-date overview of the area of Subsea Pipeline Engineering, taking delegates through the pre-design phase, design, construction, installation, operation and  more...

Fundamentals of Finance Accounting Project Investment Analysis in Oil Gas This 3-day separately book-able course is not designed to skill Oil & Gas engineers to be accountants, but to give participants the confidence and ability to communicate with accountants and finance managers and to improve their own financial decision making. For engineering professionals, a high level of technical expertise is no longer sufficient for superior management performance. Oil &  more...

Root Cause Analysis RCA 23 - 25 November 2011 Root Cause Analysis is a systematic, evidence-driven process that helps you find the true underlying (and often hidden) causes that result in unwanted events. We will see why minor failures matter, and how they can escalate out of control. In this intermediate training course, we will explain how to select the problems that matter the most, the tools & techniques to apply and find the relevant  more...

LEADERSHIP TEAM DYNAMICS in Oil Gas 1 3 November 2011 Kuala Lumpur Malaysia This uniquely designed 3 day training course will help you overcome the challenges that you face, enabling you to optimise your success strategies. Days 1 & 2 are designed for team leaders, supervisors or managers working in a team based environment, whether you work for an operator company or for non-operator partners. Day 3 is separately bookable, and is specifically designed for those who  more...

The International Oil Gas Executive Development Program Essential Management Commercial Skills for Oil Gas Professionals This practical, intensive 5 day course aims to provide participants with a solid grounding in the principles and practices of business management that are essential when moving from an operational to a more strategic role. Where operational management is about implementing plans with known parameters, strategic management is about exercising judgement in complex environments where there is no a  more...

4th Run in Asia Application of Structural Geology in Seismic Interpretation 17 21 October 2011 Kuala Lumpur Seismic interpretation requires understanding of structural development and its interrelation with the stratigraphic system. Bias and misunderstanding have unfortunately resulted in countless dry holes. So go beyond tracing horizons and understand their context within the structural system by extracting key information from seismic surveys and other datasets. You will learn a variety of  more...

PRIMARY REMEDIAL CEMENTING TECHNOLOGY 17 21 October 2011 Kuala Lumpur Your Expert Trainer Denis Gaudet P Eng The objective of this course is to provide each participant with an understanding of all aspects of well cementing so that he or she may be able to design an appropriate cementing job for a particular situation. Primary casing cementing jobs are relied upon until abandonment. Poor quality or ineffective jobs are sometimes difficult to identify and repair. The result of imperfectly conceived and  more...

6th run in Asia LNG FUNDAMENTALS Master the Essential Commercial and Technical Forces Driving the Global LNG Value Chain 31st Oc About this training course The 21st century has been coined the century of gas. The course will address the fundamental technical and economic factors that have driven and will drive the successful development of natural gas reserves by means of an integrated liquefied natural gas (LNG) project. The current exponential growth in the use of natural gas through international trade in LNG is  more...

Oil Gas Financial Modelling Project Evaluation This 3 a day course provides a sound understanding of both the principles of financial modelling and the practical application of these to real-world Oil & Gas business scenarios through the use of spreadsheets. The course builds upon the financial modelling principles and practices learned to apply these to project evaluations. Participants improve their mastery of project evaluation  more...

BASIC ADVANCED BUDGETING FORECASTING IN OIL GAS 12 14 October 2011 To stay on top, Oil & Gas companies must constantly re-examine the budgeting and forecasting models they use in their decision making processes to ensure they are up-to-date and incorporate the latest in budgeting and forecasting best practices. Is there an opportunity to expand take advantage of the stronger price of Oil? Where can technology costs be optimised? How does a drop of 10% in  more...

Floating Production Storage Offloading Design and Technology Expert Trainer Jean - Paul Denise The number of floating production systems is set to grow from 250 units to 299 in 2011. As crude oil prices rise above USD 100 per barrel, FPSO technology is no doubt the most efficient and viable solution for offshore field development. However, with development projects going to greater depth and complexity, the big question still remains on how to drive greater efficiency from better FPSO  more...

Design of Subsea Control Systems Umbilicals Expert Faculty Jonathan E Williams PhD A reliable operation combined with accurate control and monitoring of subsea installations is essential to ensure the highest production availability, while providing a safe and environmentally friendly field operation. As subsea production stretches the boundaries through long tiebacks, and high pressures, the demand on control systems becomes even higher. This training course will look into  more...

Advanced Casing Design Expert Faculty - Dr Michael Gibson This very intensive 5 day course and has been specifically designed on an advanced level for engineers with prior experience in casing design. The course aims to participants through the key drivers behind casing design for exploration, appraisal and development wells and their associated risks, challenges and solutions. Presentation material is through the use of very detailed manuals,  more...

Upstream Petroleum Contracts and Practice in Negotiations with Fugro Robertson This course will help you develop an in-depth knowledge of the legal and contractual framework in which the upstream oil industry conducts its operations. It opens with an explanation of the geopolitical forces which shape the modern oil industry and then covers the major technical, legal/ contractual and financial/ economic/ taxation/ fiscal issues that form modern E&P agreements worldwide.  more...

Drilling Essentials for New Engineers and Non-Technical Professionals in Oil Gas 25 - 26 August 2011 By attending this 2-day industry fundamentals training course, you will better able to: Understand drilling terminology & drilling processes for completing onshore & offshore wells Appreciate major cost components of drilling operations and its impact for better project planning and management Better visualise major drilling equipment and their technical functions to promote a  more...

Drilling Essentials for New Engineers and Non-Technical Professionals in Oil Gas 17 - 18 August 2011 By attending this 2-day industry fundamentals training course, you will better able to: Understand drilling terminology & drilling processes for completing onshore & offshore wells Appreciate major cost components of drilling operations and its impact for better project planning and management Better visualise major drilling equipment and their technical functions to promote a  more...

introduction to Exploration and Production for New Engineers and Non-Technical Professionals 15th - 16th August 2011 By attending this 2-day industry fundamentals training course, you will better able to: - Appreciate the dynamics of world energy demand & supply and its impact on pricing - Understand the formation of petroleum reservoirs and basic geological considerations - Examine the exploration process to gain an overview of the technical processes involved - Gain a comprehensive overview of drilling  more...

Drilling Essentials for New Engineers and Non-Technical Professionals in Oil Gas Vietnam 22nd - 23rd August 2011 Gain an overview of drilling procedures, the terminology used, its cost components and the latest technological developments driving this activity By attending this 2-day industry fundamentals training course, you will better able to: Understand drilling terminology & drilling processes for completing onshore & offshore wells Appreciate major cost components of drilling operations  more...

Technical Report Writing Presentation Skills For Oil and Gas Professionals 10 - 12 August 2011 Oil & Gas professionals increasingly need to translate complex findings, analysis and recommendations for effective decision making. If you a face challenges in getting your findings into paper and presenting it effectively, you will benefit from this 3-day training course: EFFECTIVE TECHNICAL REPORT WRITING FOR OIL & GAS PROFESSIONALS a Write and turn-around accurate technical documents  more...

Flow Assurance for Offshore Production FOR OFFSHORE FIELD DEVELOPMENT 25 July - 29 July 2011 This training course provides an in-depth understanding of the issues to be considered in the development of offshore fields. Each day consists of lectures in the morning and a hands-on workshop in the afternoon. The workshop allows the participants to appreciate the design process associated with field developments. Various software will be available during the training course to predict  more...

Gas-Lift Design Operation and Automation with Cleon Dunham 18th July - 22nd July 2011 The objective of this course is to provide the most advanced and comprehensive gas lift design and operations training available to the industry. It also emphasizes emerging technology in the form of actual gas lift valve performance and dynamic gas lift simulation, which advance the practice of gas lift from a black art to a true engineering discipline. The course will also prove valuable to  more...

OSV Chartering and Charterparty Management 18th July - 22nd July 2011 In the Offshore Oil & Gas industry, field development, hook-up and production activities are dependent on the reliable availability of a fleet of Offshore Support Vessels (OSV). Not only is the availability of OSVa ™s important, but expertise and a know howa in C/ P and or contract management is equally crucial. Understanding the essential ingredients of contracts and mastering the  more...

Introduction to Oil Gas Exploration Production For New Engineers Non-Technical Professionals 18-19 July 2011 By attending this 2a day industry fundamentals training course, you will better able to: - Appreciate the dynamics of world energy demand & supply and its impact on pricing - Understand the formation of petroleum reservoirs and basic geological considerations - Examine the exploration process to gain an overview of the technical processes involved - Gain a comprehensive overview of drilling  more...

Technical Report Writing Presentation Skills For Oil and Gas Professionals Effectively document and communicate your technical Oil & Gas professionals increasingly need to translate complex findings, analysis and recommendations for effective decision making. If you a face challenges in getting your findings into paper and presenting it effectively, you will benefit from this 3-day training course: EFFECTIVE TECHNICAL REPORT WRITING FOR OIL & GAS PROFESSIONALS (2-3 March 2011) a Write and turn-around accurate  more...

Technical Report Writing Presentation Skills For Oil and Gas Professionals Effectively document and communicate your technical Oil & Gas professionals increasingly need to translate complex findings, analysis and recommendations for effective decision making. If you a face challenges in getting your findings into paper and presenting it effectively, you will benefit from this 3-day training course: EFFECTIVE TECHNICAL REPORT WRITING FOR OIL & GAS PROFESSIONALS (2-3 March 2011) a Write and turn-around accurate  more...

Reliability Centered Maintenance Master Class with V Narayan 13 to 17 June 2011 Singapore Case study discussion with practical exercises and not just theoretical concepts An ability to go back to the workplace and begin to apply RCM is central to learning in this training course. In the five-days, two days will be spent on working through a complex RCM study. This work will be done in teams working through syndicate sessions. The case is on a major sub-system of a large turbine,  more...

3rd run in Asia COMPLETION DESIGN SCHOOL 27 June 1 July 2011 Kuala Lumpur This 5 day school is aimed at engineers and supervisors who already have an understanding of well construction methods, but who would benefit from a more detailed knowledge completion design. The course will concentrate on the important aspects of completion design and what makes a safe and efficient well. A common thread of practical examples are used througha out the course. The exercises  more...

Introduction to Petrophysics - Log Analysis LWD Wireline 30 May 3 June 2011 Kuala Lumpur Malaysia Petrophysics remains a vital component to many facets of the petroleum industry, from quantification of hydrocarbon reserves, developmental strategies to real-time decision making for reservoir navigation. This 5 day course addresses the fundamental tenets of petrophysics and formation evaluation, using integrative perspective of multiple datasets, including geological, geophysical, logging and  more...

TROUBLE FREE HIGH ANGLE EXTENDED REACH COMPLEX WELLS 24 26 May 2011 Kuala Lumpur Malaysia If your directional projects would benefit from reduced uncertainty and dependably lower costs, reserve your place now! Course Objectives Reduce high angle and ERD projectsa ™ drilling risk, time and cost through teaching personnel techniques developed during the planning, drilling and review of some of the worlda ™s most demanding ERD and complex wells. Show how to accurately  more...

Introduction to Oil Gas Exploration Production For New Engineers Non-Technical Professionals 30 - 31 May Singapore By attending this 2-day industry fundamentals training course, you will better able to: - Appreciate the dynamics of world energy demand & supply and its impact on pricing - Understand the formation of petroleum reservoirs and basic geological considerations - Examine the exploration process to gain an overview of the technical processes involved - Gain a comprehensive overview of drilling  more...

Image Log Interpretation 23 27 May 2011 Kuala Lumpur The dipmeter is unfortunately one of the least utilized interpretation tools available to the geoscientist, despite widespread structural and stratigraphic applications. Thus, this course is designed to provide participants with a detailed understanding of dipmeter and bore hole image acquisition, interpretation techniques, and data integration into geologic and geophysical models. Applications  more...

Essential EPC Contract Management and Law for EPC Engineers Procurement and Non-Legal Professionals in Oil Gas By attending this 3-day separately book-able intensive course, you will be able to: 1. Safeguard your interests by understanding the basics of contract law in plain English and learning simple contract language risk mitigation techniques 2. Quickly identify dangerous words/ phrases in the contracts of others that could cost your company millions 3. Effectively manage risk on your project  more...

BASIC ADVANCED BUDGETING FORECASTING IN OIL GAS 26 28 April 2011 To stay on top, Oil & Gas companies must constantly re-examine the budgeting and forecasting models they use in their decision making processes to ensure they are up-to-date and incorporate the latest in budgeting and forecasting best practices. Is there an opportunity to expand take advantage of the stronger price of Oil? Where can technology costs be optimised? How does a drop of 10% in  more...

WELL INTEGRITY MANAGEMENT 23 - 25 MAY 2011 This intensive three-day course is designed to provide participants with a thorough knowledge of well integrity management and risk assessment in producing assets. Based on the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the oil and gas industry. When to take action with a well is a critical  more...

BASIN ANALYSIS 23 - 27 May 2010 Kuala Lumpur The workshop course is intended to emphasise the practical geological applications of basin analysis studies to petroleum exploration. This course takes the trainee up to just below the level of full play fairway and petroleum systems analysis. However, it stresses the importance of basin evolution to petroleum generation, migration and accumulation. It will include worked examples in rift basins,  more...

2nd Run in Asia Introduction to Offshore Drilling Floating Production Facilities 11 - 14 April 2011 This course is intended for drilling engineers who wish to learn more of how their technology is integrated into a successful full field development. Equally it is intended for production engineers to learn more of the drilling methods which provide the wells in a field Development. The course is also suitable for both new engineers or management newly moved into field development areas and  more...

2nd Run in Asia WELL INTEGRITY MANAGEMENT 26 - 28 April 2011 Kuala Lumpur This intensive three-day course is designed to provide participants with a thorough knowledge of well integrity management and risk assessment in producing assets. Based on the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the oil and gas industry. When to take action with a well is a critical  more...

3rd Run in Asia Subsea Pipeline Engineering 7th - 11th March 2010 Kuala Lumpur Subsea pipelines are the arteries of the offshore industry, and around the world more than 18, 000km are in service. Part of almost every project, they often form a large component of project cost. This course will provide a complete and up-to-date overview of the area of Subsea Pipeline Engineering, taking delegates through the pre-design phase, design, construction, installation, operation and  more...

LNG Fundamentals with Mike Williams and Richard Harrison 4 6 April 2011 Kuala Lumpur The 21st century has been coined the century of gas. The course will address the fundamental technical and economic factors that have driven and will drive the successful development of natural gas reserves by means of an integrated liquefied natural gas (LNG) project. The current exponential growth in the use of natural gas through international trade in LNG is explored. This 3 day course  more...

HPHT WELL ENGINEERING 28 March 1 April 2011 Kuala Lumpur Conventional HPHT (High Pressure - High Temperature) conditions (>10, 000 psi and 300 F) are becoming routine drilling targets in many basins worldwide, as exploration and production examine deeper and hotter objectives. This course will equip participants with knowledge and skills of HPHT well engineering and the components required for well planning and issues which influence successful  more...

Drilling Essentials For New Engineers Non-Technical Professionals 28 29 March Kuala Lumpur Malaysia By attending this 2-day industry fundamentals training course, you will better able to: Understand drilling terminology & drilling processes for completing onshore & offshore wells Appreciate major cost components of drilling operations and its impact for better project planning and management Better visualise major drilling equipment and their technical functions to promote a  more...

DEEPWATER WELL ENGINEERING 21 25 March 2011 Kuala Lumpur This 5 day training course examines the difficulties, challenges facing todaya ™s deepwater drilling programme designers and personnel where wells are being drilled in increasingly difficult downhole and environmental conditions. Ever increasing cost and legislation further contribute to design and operational pressures. From this training course, you will have access to potential proven  more...

Exploration Production Business Simulation 21 23 March 2011 Kuala Lumpur Malaysia This three day E&P Business Simulation training course is designed for groups working within the E&P sector to experience the process of formulating a medium term E&P Business Plan. The course will draw on technical, commercial and management skills as the teams work on building a 5-year plan for a business comprising of producing assets, appraised and unapprised discoveries, several exploration  more...

MANAGING COMPLEX PROJECTS For Oil Gas Professionals with Bob Mittelsdorf 2 - 3 March 2011 Kuala Lumpur Malaysia Are there projects that seem to be too complex to be able to handle? The myriad of stakeholders and their requirements, the multitude of variables to be identified and managed, and the way that they might all interact and create unexpected problems, can be daunting, and even overwhelming. This course shows you how to determine the level of complexity of a project, gives you an understanding of  more...

FRACTURED RESERVOIR CHARACTERISATION 28 Feb 2 March 2011 Kuala Lumpur Malaysia The course goes through the entire process of project definition, data gathering and analysis, concept definition and static and dynamic modelling iterations. This will help participants understand fractured reservoirs and define the most efficient way to model them for a given set of objectives.  more...

PROJECT MANAGEMENT For Oil Gas Professionals with Bob Mittelsdorf 28 February 1 March 2011 Kuala Lumpur Malaysia At present, project managers in the oil and gas industry have to make decisions in an environment of high levels of uncertainty and risk. Poor project management causes oil and gas companies massive losses of resources and money. In a climate of volatile oil prices, it is more important than ever to halt these losses. This interactive 2-day course will equip you with the skills and knowledge  more...

DEEPWATER DRILLING OPERATIONS 28 February 3 March 2011 Kuala Lumpur Malaysia This 4-day training course will describe the different types of deepwater drilling units, all their necessary specific equipment and techniques to spud a well ranging from 1000 to 10, 000 feet. The goal being to transmit to all participants the key technology and operational challenges with sufficient depth of knowledge on: a Floating drilling rigs (SS / DPDS) and their specific equipment for  more...

Fundamentals of Upstream Oil Gas Contracts for Engineers Procurement Professionals In a dynamic Oil & Gas market, the success of your project is dependent on the practical know-how when working with contracts. Understanding the essential ingredients of contracts and master the fundamentals that will equip you to identify vague contracts, avoid dangerous and often hidden terms, and better understand your position and your project. This three day intensive workshop that covers  more...

2nd run in Asia Negotiation Skills Techniques for Engineers and Technical Professionals 27 28 January 2011 This is a two day training course that is aimed at providing professionals in the oil & gas business with a comprehensive set of core negotiating skills. Negotiations take place in many situations e. g. between peers, manager and subordinate, company and trade unions, company and government. The skills learnt on this course will be useful in all of these situations. However the course puts a focus  more...

2nd run in Asia Maintenance of Electrical Equipment in Oil Gas Installations 24 26 January 2011 The course will provide those charged with leading electrical maintenance with the best practice know-how needed for: a Safe operation a High reliability at an optimised low cost and a a Defensible approach to reliability, availability, sparing, integrity and safety. The course balances an engineera ™s practical perspective with the demands of business needs. It meets the needs  more...

Technical Report Writing Presentation Skills For Oil and Gas Professionals 24 January 2011 - 26 January 2011 Oil & Gas professionals increasingly need to translate complex findings, analysis and recommendations for effective decision making. If you a face challenges in getting your findings into paper and presenting it effectively, you will benefit from this 3-day training course: EFFECTIVE TECHNICAL REPORT WRITING FOR OIL & GAS PROFESSIONALS a Write and turn-around accurate technical documents  more...

Fundamentals of Finance Accounting and Project Investment Analysis in Oil Gas 24 Jan 2011 - 26 Jan 2011 This 3-day separately book-able course is not designed to skill Oil & Gas engineers to be accountants, but to give participants the confidence and ability to communicate with accountants and finance managers and to improve their own financial decision making. For engineering professionals, a high level of technical expertise is no longer sufficient for superior management performance. Oil &  more...

WRITING EFFECTIVE STANDARD OPERATING PROCEDURES SOP FOR OIL GAS PROFESSIONALS ENGINEERS A Standard Operating Procedure (SOP) is a set of instructions having the force of a directive, covering those features of operations that lend themselves to a definite or standardized procedure without loss of effectiveness. The presence of these quality documents is essential when inspections take place since the most frequent reported deficiencies during inspections are the lack of written SOPs  more...

Introduction to Subsea Inspection Maintenance Repair 8th -10th December 2010 This Three Day course will give an introduction to subsea Inspection, Maintenance and Repair (IMR) as it is practiced in the offshore oil and gas industry. It will include IMR fundamentals, planning and implementation. The course attendees will learn the importance of * Subsea structural, pipeline and export system purpose and general layouts. * Subsea threats, including mechanical, marine and  more...

HPHT Well Operations 29 November 2010 - 3rd December 2010 Conventional HPHT (High Pressure - High Temperature) conditions (>10, 000 psi and 300 F) are becoming routine drilling targets in many basins worldwide, as exploration and production examine deeper and hotter objectives. This course will equip participants with knowledge and skills of HPHT well engineering and the components required for well planning and issues which influence successful  more...

ROOT CAUSE ANALYSIS Intermediate Level 1 3 December 2010 Kuala Lumpur Malaysia Root Cause Analysis is a systematic, evidence-driven process that helps you find the true underlying (and often hidden) causes that result in unwanted events. We will see why minor failures matter, and how they can escalate out of control. In this intermediate training course, we will explain how to select the problems that matter the most, the tools & techniques to apply and find the relevant  more...

Enhanced Oil Recovery EOR Reservoir Engineering Aspects of CO2 Flooding -13 17 December 2010 Kuala Lumpur Malaysia Oil reservoirs mature and ultimately reach the limit of their economical productivity under primary management strategies. In order to extend the production life of such reservoirs, already proven improved and enhanced oil recovery techniques have to be considered. Carbon Dioxide (CO2) injection emerged as one of the most feasible process from both physical and economic aspects. This  more...

Engineering of Subsea Production Systems 14 16 December 2010 Kuala Lumpur Malaysia This concise course is well balanced and based on more than 30 years of true project experience in Shallow and Deep Water fields around the world, from concept evaluation to first production. It is designed for Project Managers, Project Engineers, experienced or new to Subsea & highly suitable for Cost, Planning, Offshore Installation and Offshore Operation Engineers.  more...

Clastic Exploration Reservoir Sedimentology 29th November - 03rd December 2010 This course has been developed to provide an understanding of the geometry and hydrocarbon potential of clastic depositional systems and facies, and how they are affected by such important features as basin configuration, tectonics and eustasy. Each of the major clastic environments is covered in terms of lithology, facies, log response and reservoir quality and the depositional models related to  more...

Subsea Pipeline Engineering 29 - 02 December 2010 Subsea pipelines are the arteries of the offshore industry, and around the world more than 18, 000km are in service. Part of almost every project, they often form a large component of project cost. This course will provide a complete and up-to-date overview of the area of Subsea Pipeline Engineering, taking delegates through the pre-design phase, design, construction, installation, operation and  more...

Finance for Non Finance Professionals in Oil Gas and Petroleum Fiscal Regimes Applied Finance for Oil and Gas Industry 29 - 01 This 3-day separately book-able course is not designed to skill Oil & Gas engineers to be accountants, but to give participants the confidence and ability to communicate with accountants and finance managers and to improve their own financial decision making. For engineering professionals, a high level of technical expertise is no longer sufficient for superior management performance. Oil &  more...

Stuck Pipe Prevention Fishing 22nd - 26th November 2010 This 2 day course focuses upon how fishing can be a success first time. To maximise their learning, delegates work through actual fishing case histories and follow proven procedures and methodologies. Presentation material is through the use of the Fishing Handbook, PowerPoint, case histories, videos and digital film.  more...

Well Intervention and Productivity with Howard Crumpton This course is designed to make those that attend aware of how their job can directly impact the productivity. Early identification of problems in wells and effective interventions to fix problems can have a significant impact by minimising lost oil through formation damage and non productive time. As well as discussing best practice, time will be made available for discussion relating to specific  more...

3rd Run in Asia Application of Structural Geology in Seismic Interpretation 25 - 29 October 2010 Kuala Lumpur Seismic interpretation requires understanding of structural development and its interrelation with the stratigraphic system. Bias and misunderstanding have unfortunately resulted in countless dry holes. So go beyond tracing horizons and understand their context within the structural system by extracting key information from seismic surveys and other datasets. You will learn a variety of modern  more...

GAS-LIFT DESIGN OPERATION AUTOMATION 18 22 OCTOBER 2010 KUALA LUMPUR MALAYSIA The objective of this course is to provide the most advanced and comprehensive gas lift design and operations training available to the industry. It also emphasizes emerging technology in the form of actual gas lift valve performance and dynamic gas lift simulation, which advance the practice of gas lift from a black art to a true engineering discipline. The course will also prove valuable to  more...

GAS-LIFT DESIGN OPERATION AUTOMATION 25 29 OCTOBER 2010 BANDUNG INDONESIA The objective of this course is to provide the most advanced and comprehensive gas lift design and operations training available to the industry. It also emphasizes emerging technology in the form of actual gas lift valve performance and dynamic gas lift simulation, which advance the practice of gas lift from a black art to a true engineering discipline. The course will also prove valuable to  more...

Advanced Budgeting Foracasting in Oil Gas To stay on top, companies must constantly re-examine the budgeting and forecasting models they use in their decision making processes to ensure they are up-to-date and incorporate the latest in budgeting and forecasting best practices. Is there an opportunity to expand take advantage of a weaker competitor? Where can costs be optimised? How does a drop of 10% in oil price affect profit? To  more...

Oil Gas Finance Modelling and Project Management 4th to 6th October 2010 This 3 a day course provides a sound understanding of both the principles of financial modelling and the practical application of these to real-world Oil & Gas business scenarios through the use of spreadsheets. The course builds upon the financial modelling principles and practices learned to apply these to project evaluations. Participants improve their mastery of project evaluation  more...

ADVANCED CASING DESIGN 27 Sep 1 Oct 2010 Kuala Lumpur This very intensive 5 day course and has been specifically designed on an advanced level for engineers with prior experience in casing design. The course aims to participants through the key drivers behind casing design for exploration, appraisal and development wells and their associated risks, challenges and solutions. Presentation material is through the use of very detailed manuals,  more...

INTERNATIONAL PETROLEUM CONTRACTS PRACTICE IN NEGOTIATIONS 29 September - 1 October 2010 Kuala Lumpur Malaysia You will learn the philosophy, evolution and fundamentals of international petroleum contracts. You will take part in life-like negotiating sessions mastering many negotiating techniques, where a mistake is a learning experience not a disaster. This course will help you develop an in-depth knowledge of the legal and contractual framework in which the upstream oil industry conducts its  more...

Offshore Drilling Production Facilities 30 August 1 September 2010 Ho Chi Minh City This course is intended for new drilling and production crew. The course is also suitable for both senior engineers and management professionals moving into field development responsibility for the first time. It is also suitable for other professionals supporting field development activities in the geosciences arena. Individuals who require a basic understanding of integrated field  more...

Introduction to DEVELOPMENT GEOLOGY 27 28 September 2010 Kuala Lumpur Malaysia Course Description A profitable development of an Oil & Gas field starts with a good understanding of the subsurface. The development then continues with integrated field management in which geology plays an essential role. In this course the a development life cyclea from the gathering of geological data, the interpretation thereof, and the preparation of geological models and the  more...

Introduction to Natural Gas Engineering 27 September 1 October 2010 Kuala Lumpur Malaysia Course Description This intensive one week short course is structured to provide training in the practical aspects of natural gas engineering and operations and the use of this background in analyzing a number of typical field problems. In the early part of the course gas reservoir engineering fundamentals, estimation of gas reserves, and calculations of gas well deliverability are covered.  more...

Field Development Project Management 2 - 3 September Kuala Lumpur Project management is rapidly becoming more complex in the Oil & Gas business today. Project managers need to constantly deal with turbulent oil prices, new technology, tedious regulatory requirements, inadequate human resources capability and financial support when rolling-out new fields for development. This 2 day training course address these practical challenges that project managers face  more...

Applied Production Logging Cased Hole Production Log Evaluation,Kuala Lumpur, Malaysia a 3rd run in KL About The Course: This two-day program is a comprehensive and up-to-date course covering the new and traditional wireline diagnostic techniques for production log surveillance of cased wells. Dr. Smolena ™s 1996 book, Cased Hole and Production Log Evaluation, plus a loose-leaf workbook, are provided to participants of this program. Participants Will Be Able To: * identify if formation  more...

Training to Reduce Unscheduled Events (T.R.U.E) This highly acknowledged 5 day training course promotes the reduction of downtime in rig operations. It aspires to increase the understanding of this occurrence and the causes behind it. The course examines in detail how to develop a well and its rig specific action plan in order to create a clear plan to control escalating costs.  more...

WELL INTEGRITY MANAGEMENT This intensive three-day course is designed to provide participants with a thorough knowledge of well integrity management and risk assessment in producing assets. Based on the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the oil and gas industry.  more...

FLOW ASSURANCE For Offshore Field Development Course Objectives: This training course provides an in-depth understanding of the issues to be considered in the development of offshore fields. Each day consists of lectures in the morning and a hands-on workshop in the afternoon. The workshop allows the participants to appreciate the design process associated with field developments. Various software will be available during the training  more...

2nd run in Asia! COMPLETION DESIGN SCHOOL This course is aimed at engineers and supervisors who already have an understanding of well construction methods, but who would benefit from a more detailed knowledge completion design. The course will concentrate on the important aspects of completion design and what makes a safe and efficient well. A common thread of practical examples are used through-out the course.  more...

Upstream Petroleum Economics and Risk Analysis With Fugro Robertson This separately book-able 5 day course describes the fundamentals of international oil & gas asset valuation and economic risk assessment and is designed to enhance the contribution that delegates make to investment decision mechanisms in their partnerships within industry. It describes the theories and practices of discounted cash flow applied in the global oil industry to exploration  more...

VSTO Visual Studio Tools for Office using Visual Basic Microsoft would much rather that everyone stopped writing code within Excel, Word and Outlook using VBA, and switched to using Visto (VSTO, or to give it its full name, Microsoft Visual Tools for Office) instead. This three-day course allows you to do just that! VSTO - Visual Basic training course (3 days) You will find the course easier if you have already done some programming in VBA, however  more...

VSTO Visual Studio Tools for Office using C# Sharp Visual Studio Tools for Office (abbreviated to VSTO, and affectionately known as VSTO) is the application Microsoft want you to use to program within Microsoft Office. If you want to see what the future holds for VBA, find out on this three-day course! This course uses C# as a programming language.  more...

SSAS 2008 R2 Sql Server Analysis Services Do you have data sitting in your corporate SQL Server database, but not know how to make use of it? If you already know SQL, maybe it s time to learn about multi-dimensional reporting using cubes. Speed up your reports, analyse your KPIs and improve your data-mining with SQL Server Analysis Services. This course concentrates on practical teaching and exercises, to allow you to create and modify  more...

SSRS 2008 R2 Sql Server Reporting Services SQL Server Reporting Services 2008 R2 is THE way to publish reports to your corporate intranet. Not only can you include tables of data, matrices (you may know these as pivot tables), charts, lists and subreports, but SSRS 2008 R2 also includes whizzy new report items like indicators, gauges and sparklines. On this three-day course you will use SQL Server 2008 R2 Business Intelligence Development  more...

Microsoft PowerPoint 2010 Introduction This one-day course shows you how to create presentations in PowerPoint. Learn how to use templates, draw, animate your presentations and add exciting transition effects! To attend this course you must already know how to use Windows. There will be a maximum of 6 people on each course, and each person will have their own computer.  more...

Microsoft Excel 2010 Introduction New to Excel 2010? This is the perfect place to start. This one-day course shows you all the basics of Excel: creating formulae, formatting your worksheets, printing your work, creating charts and (if time allows, which it usually does) sorting and filtering tables of data. This course is suitable for those who are new to Excel.  more...

Advanced PowerPoint 2010 If you already know how to create basic presentations, maybe it is time to learn more about what PowerPoint can do. This fun one-day course shows you how to create action buttons in presentations, create custom shows, create slide masters and much more. You must already know how to create presentations in PowerPoint to attend this course.  more...

Introduction to ASP.NET using VB This 3-day course shows you all you need to know to create web sites using ASP. NET 3. 5 (the latest version of the flagship Microsoft web development product ASP. NET). All course examples use Visual Basic 2005, and the editing software used is Visual Studio 2005. If you would rather use Visual C# as a development language, see the relevant course elsewhere on this web site. For a full list  more...

Introduction to ASP.NET using C# Sharp This 3-day course shows you all you need to know to create web sites using ASP. NET 3. 5 (the latest version of the flagship Microsoft web development product ASP. NET). All course examples use Visual C# 2005 (also known as Visual C Sharp 2005), and the editing software used is Visual Studio 2005. If you would rather use Visual Basic as your development language, see the separate course  more...

Advanced ASP.NET using C# Sharp This two-day course assumes that you know the basics of ASP. NET, and aims to turn you into a serious developer. The course will show how to create 3-tier applications and how to design and create your own classes. The course will also cover user controls. This course will use Visual Studio 2005 as its editing tool, Visual C# (also known as Visual C Sharp) as its programming language and ASP.  more...

Advanced SQL If you are comfortable creating queries in SQL, maybe it is time to move on to learn more advanced programming topics? This three day course assumes that you know how to use the main SQL keywords SELECT, FROM, WHERE, GROUP BY and ORDER BY, and shows you how to really progam in SQL Server. Learn how to write stored procedures, create 3 different types of function, use subqueries effectively - and  more...

Excel VBA Macros Not only our best-selling course, but also one of our favourites. This two-day course takes you through Visual Basic for Applications in Excel from recording macros through to advanced form design. On the way you will learn how to write object-oriented programs and how to create loops and implement error-handling. Microsoft Excel macros are fun - let us show you why! For a full list of  more...

Microsoft Word 2003 Introduction If you haven't used Microsoft Word before, this one-day introductory course is the perfect place to start. Assuming no knowledge of Word, the course shows you how to create letters and reports in Word, format your text and print your letters.  more...

Advanced Excel 2007 If you have been using Microsoft Excel for a while now, maybe it is time to move on a bit. This two-day course shows how you can use Excel to manage a database, create advanced charts, use some of the advanced functions in Excel and much more besides! Why not spend two days finding out just what Excel can do?  more...

Microsoft Excel 2003 Advanced If you've been using Microsoft Excel for a while now, maybe it's time to move on a bit. This two-day course shows how you can use Excel to manage a database, create advanced charts, use some of the advanced functions in Excel and much more besides! Invest two days of your time to make yourself permanently more efficient in Excel, by finding out just what it can do.  more...

Basic Querying in Access 2007 Does your computer system generate large amounts of data, which you find is just too cumbersome to analyse? This course assumes no knowledge of Access, and shows how to use Access queries to manipulate data (whether this is held in Access, Excel or some other format). Database design, tables, forms and reports are also normally briefly covered. For a full list of course topics, see our  more...

Access VBA Macros If you have mastered tables, queries, forms and reports in Access, it is maybe time to learn Access programming. This two-day course shows you how to use Access VBA to automate your databases, making your database development easier - and more fun! For a full list of course topics, see our website  more...

Microsoft Access 2010 Basic Querying Have you got a corporate database from which you want to extract information? It might be Access, or it might be Sage or in SQL Server. This one-day course will not show you how to build new databases, but it will show you how to get information out of existing ones. The course explains how databases are constructed, then shows the ins and outs of creating queries and reports. Note that this  more...

Access 2010 Introduction for Developers Have you got to create a new Access database, or make changes to an existing one? This is the course for you! Beginning with the oh-so-important principles of database design, the course explains step by step how to create a database, create queries, design forms and reports and write the Visual Basic code that you need to link all of this together. Note that it takes a long time to learn Access,  more...

Microsoft Word 2003 Advanced So you think you know how to use Microsoft Word properly? This two-day course assumes that you are comfortable with Word, and then gives an expert's view of all that it can do. Learn why outline numbering never does what you want it to, how the NORMAL. DOT template really works, and why master documents are best avoided. Thoroughly recommended!  more...

Advanced PowerPoint 2007 You have probably been using the basics of PowerPoint for some time now to create simple presentations and slide shows, but wonder what more it has to offer. This one-day course takes you further into PowerPoint, showing (for example) how to create your own templates, link presentations and even how to record macros. For a full list of course topics, see our website  more...

Microsoft Project 2007 We can not make you a perfect project manager, but we can show you how to use Microsoft Project effectively. Learn how to juggle tasks and resources, and create that all-important Gantt chart! This course also covers topics such as creating and assigning resources, conflict levelling and splitting tasks. For a full list of course topics, see our website  more...

Basic Querying in Access 2003 Does your computer system generate large amounts of data, which you find is just too cumbersome to analyse? This course assumes no knowledge of Access, and shows how to use Access queries to manipulate data (whether this is held in Access, Excel or some other format). Database design, tables, forms and reports are also normally briefly covered. For a full list of course topics, see our  more...

Visual CSharp 2005 Windows Forms Been dabbling with C++, C, Java or JavaScript? This is the ideal course for you! Learn how to create forms and code in Visual C# 2005 (also known as Visual C Sharp 2005), using Visual Studio 2005 as the development environment. If you would rather use Visual Basic as your development language, see the separate course elsewhere on this web site. For a full list of course topics, see our website  more...

SSRS 2005 In the current business environment organisations need to be able to transform data into clear, concise, user-friendly formats. This two-day SQL Server Reporting Services (SSRS) course shows you how to create, execute and manage reports. Using SQL Server 2005 Business Intelligence Studio you will create interactive reports and learn how to deploy and export them in various formats. You will  more...

Writing SQL You may have a fantastic database, but unless you can extract useful information from it, it may as well not exist! This two-day course shows you how to mine your database, from getting a mailing list of people meeting certain criteria through to compiling summary information for the board. Note that the SQL language varies slightly between different database providers; this course teaches the  more...

Access 2007 Introduction for Developers Have you been given the task of designing and developing a database in Microsoft Access? Finding it difficult to know where to start? This three-day course assumes no prior knowledge of Access, and covers all the basics of Access, including how to design your database, creating tables, creating Access queries, and using Access forms, reports and macros. In fact the only thing this course does  more...

Excel 2007 Business Modelling This course is aimed fairly and squarely at people who work in Finance and business modelling. Developed in-house by an expert in business modelling, this course shows you how to create robust business models which are easy to build and (above all) easy to test. The course makes extensive use of Excel range names. For a full list of course topics, see our website  more...

Introduction to Word 2003 If you haven't used Microsoft Word before, this one-day introductory course is the perfect place to start. Assuming no knowledge of Word, the course shows you how to create letters and reports in Word, format your text and print your letters. For a full list of course topics, see our website  more...

Access 2003 Introduction for Developers Have you been given the task of designing and developing a database in Microsoft Access? Finding it difficult to know where to start? This three-day course assumes no prior knowledge of Access, and covers all the basics of Access, including how to design your database, creating tables, creating Access queries, and using Access forms, reports and macros. In fact the only thing this course does  more...

Advanced ASP.NET using VB This two-day course assumes that you know the basics of ASP.NET, and aims to turn you into a serious developer. The course will show how to create 3-tier applications and how to design and create your own classes. The course will also cover user controls. This course will use Visual Studio 2005 as its editing tool, Visual Basic as its programming language and ASP.NET 3.5 (the latest version)  more...

Introduction to Excel 2003 If you have not used Microsoft Excel spreadsheets before, this one-day introductory course is the perfect point to start. Assuming no knowledge of Excel, the course shows you how to enter data and formulae, format your work to look attractive, print your work and create Excel charts. For a full list of course topics, see our website  more...

Excel 2003 Business Modelling This course is aimed fairly and squarely at people who work in Finance and business modelling. Developed in-house by an expert in business modelling, this course shows you how to create robust business models which are easy to build and (above all) easy to test. The course makes extensive use of Excel range names. For a full list of course topics, see our website  more...

Advanced Word 2003 This course is ideal for people who are already familiar with the basics of Word, and want to find out what else it can do. The two-day course shows how you can create advanced tables, number pages, use paragraph styles and templates, run mail merges, create labels and create multipage reports in Word - and more besides! For a full list of course topics, see our website  more...

Advanced PowerPoint 2003 You have probably been using the basics of PowerPoint for some time now to create simple presentations and slide shows, but wonder what more it has to offer. This one-day course takes you further into PowerPoint, showing (for example) how to create your own templates, link presentations and even how to record macros. For a full list of course topics, see our website  more...

Visual Basic 2005 Windows Forms Been dabbling with VBA in Access, writing macros in Excel or building systems using Visual Basic 6? This is the ideal course for you! Learn how to create forms and code in Visual Basic 2005, using Visual Studio 2005 as the development environment. For a full list of course topics, see our website  more...

Introduction to Excel 2007 If you have not used Microsoft Excel spreadsheets before, this one-day introductory course is the perfect point to start. Assuming no knowledge of Excel, the course shows you how to enter data and formulae, format your work to look attractive, print your work and create Excel charts. For a full list of course topics, see our website  more...

Introduction to Word 2007 If you have not used Microsoft Word before, this one-day introductory course is the perfect place to start. Assuming no knowledge of Word, the course shows you how to create letters and reports in Word, format your text and print your letters. For a full list of course topics, see our website  more...

Microsoft Publisher 2007 If you regularly produce newsletters, advertisements, flyers or any other non-standard documents, it could be time to find out how to make your life easier (Word can only go so far!). This one-day course shows you how to create and print lively and interesting publications using this flagship Microsoft publishing tool. For a full list of course topics, see our website  more...

Recipe for Success If youa ™ve ever stepped into the kitchen of a busy restaurant, youa ™ll realise why the likes of Gordon Ramsey have attained their hellish reputation for a sharp tongue and an even sharper temper. In this game, teams will be a waltzinga ™ between attaining perfection while keeping the realities of a time limit in check a all under the guidance of a professional chef from an  more...

The Chocolate Challenge The Chocolate Challenge is a great team development activity. It simulates a complete business process from initial concept through design, production, marketing and promotion. Ita ™s all done in a light-hearted and highly creative environment requiring co-operation, mental and artistic skills (and several kilos of chocolate!). In this chocolate team building activity participants are  more...

Diploma in Instructional Designing KBuffer, as you may be aware, is one of the leading institutes in India providing many job-oriented courses. Instructional Designing is one of the major process of E Learning. There are many good opportunities available for Instructional Designers (IDs). We have signed up with many companies for placing our successful candidates. Any graduate who clears our English Admission Test is eligible to  more...

Post Graduate Diploma in Technical Writing This is a Job-oriented course from KBuffer, one of the leaders in Technical Writing Training. You can take it directly from any of our centers in Chennai, Hyderabad or Online through our virtual classroom. The trainer has more than 3 decades of experience and there will be personal attention for each and every student.  more...

Diploma in Technical Writing This is a Job-oriented course from KBuffer, one of the leaders in Technical Writing Training. You can take it directly from any of our centers in Chennai or Online through our virtual classroom. The trainer has more than 3 decades of experience and there will be personal attention for each and every student.  more...

Scuba Cat Diving PADI IDC 5 CDC Centre Phuket Thailand A 12 Day expanded PADI IDC, Phuket, Thailand Although PADI requires a PADI IDC to have a minimum duration of 7 days in preparation for the PADI Instructor Exam (IE), at Scuba Cat Diving, Phuket, Thailand we have found some extra presentations and workshops highly beneficial to our Instructor Training courses candidates success, taught by our resident PADI Course Director. To accommodate these  more...

Prosci's Change Management Certification Program Based on research with more than 2000 organizations from over 65 countries, Prosci's Three Phase Change Management Process and the Prosci ADKAR Model are two of the most widely used tools for leading change on organizational and individual levels. The Prosci Change Management Certification Program is a application-based full-immersion learning experience. Open enrollment courses are available in  more...

Comptia A The CompTIA A Certification course is the first step in the preparation for a career as an entry-level information technology (IT) professional or personal computer (PC) service technician. The course will present fundamental skills and concepts that you will use on the job. In this course, you will acquire the essential skills and information you will need to install, upgrade, repair, configure,  more...

Adobe After Effects CS5 You've probably worked with some design or video editing applications to create imagery, either static or animated. However, you now need to create more sophisticated video clips than you have before, either for broadcast or for the web. In this course, you'll use Adobe After Effects CS5 to create high quality, two-dimensional motion graphics by combining multiple media files and effects. Upon  more...

Visual C NET Introduction for Developers You have experience in programming in at least one other object-oriented or object-based programming language. You are now entering the new world of .NET programming, using the C# programming language and the Visual C#.NET integrated development environment inside Visual Studio.NET. This is one in a series of C# programming courses. Upon successful completion of this course, students will be  more...

CCNA Certified Network Associate Certification Cisco Certified Network Associate (CCNA ) validates the ability to install, configure, operate, and troubleshoot medium-size route and switched networks, including implementation and verification of connections to remote sites in a WAN. CCNA curriculum includes basic mitigation of security threats, introduction to wireless networking concepts and terminology, and performance-based skills. This  more...

Cascading Style Sheets You are familiar with using HTML to design web pages. You have used HTML style-oriented tags and attributes to stylize and design your pages. Cascading Style Sheets, or CSS, is integrated into HTML 4.01 and forms an important component of successful web design. CSS offers great flexibility and ease in designing web pages without code heavy HTML documents. In this course, you will work with  more...

Net Framework Introduction During the summer of 2000, at the Professional Developers Conference, the Microsoft Corporation announced its vision of the next generation of Windows services- .NET (pronounced dot-net"). Since that time many steps have been taken to ensure that .NET becomes a reality. The paradigm has been refined with each release of the .NET Framework with the public releases of the Visual Studio.NET beta  more...

HTML Level 1 While using the Internet, you have probably encountered various attractive and useful websites, and you may have formed your own opinions of their capabilities and limitations. However, merely using the Internet will not give you an understanding of how these sites are created. In this course, you will examine the basics of foundational web technology and create your own functional web pages  more...

HTML Level 2 You know how to create a basic website. However, for your website to be successful, it must stand out from the crowd and attract visitors. In this course, you will learn skills that will be instrumental in creating advanced web pages. Upon successful completion of this course, students will be able to: create web page layouts manage CSS test a website create advanced navigation incorporate  more...

Adobe Illustrator Level 1 CS5 This course is designed for students who desire the knowledge of the basic skills in Illustrator CS5. You will use Adobe Illustrator CS5 to create illustrations that include graphics and text. Upon successful completion of this course, students will be able to: get acquainted with the Adobe Illustrator CS5 application create shapes in a document create custom paths work with text in an  more...

Microsoft Internet 8 0 You are familiar with computers and how they work. Computers have contributed to the rise and spread of the Internet, which has now become the driving force for networked societies around the globe. In this course, you will be introduced to the latest version of Internet Explorer to take full advantage of all that Internet has to offer. You will use the tabbed browsing feature to browse the web  more...

Adobe Illustrator Level 2 CS5 This course is designed for students who desire the knowledge of the advanced skills in Illustrator CS5. You will create complex illustrations, manage color across a range of devices, work with graphs and variables, control how illustrations appear on print and the web, and preview them on mobile devices. Upon successful completion of this course, students will be able to: create complex  more...

Javascript You would like to develope web pages which have interactive content to attracts visitors. In this course, you will develop interactive web content using JavaScript. You will also create and execute advanced scripts using JavaScript. This course is intended for students who are familiar in developing web pages;students should be proficient in writing XHTML code and using Internet Explorer and  more...

Comptia Network The CompTIA Network Certification course builds on your existing user-level knowledge and experience with personal computer operating systems and networks to present fundamental skills and concepts that you will use on the job in any type of networking career. If you are pursuing a CompTIA technical certification path, the CompTIA A certification is an excellent first step to take before  more...

PC Basics By using a personal computer, you can accomplish many tasks that might be more difficult and time-consuming to accomplish on your own. Some of those tasks might include writing a letter, analyzing numeric information, or maintaining an updated list of client information;however, before you use a personal computer, you need to understand what it is and how it works. In this course, that's what  more...

Intro To Programming This course introduces you to general principles underlying the practice of object-oriented programming. The concepts and principles in this course are presented in a generic manner, and as such are intended to prepare the student for programming in virtually any object-oriented programming language. Learn how to identify and write basic programs using programming constructs, such as variables,  more...

Adobe Photoshop Level 1 CS5 You will understand and use the various elements in the Photoshop CS5 interface so as to efficiently work with the software. You will use the different tools in Photoshop for selecting parts of images and identify the need for having layers in a Photoshop document. You will also organize the different components of the design as layers. With the layered Photoshop document thus created, you will  more...

Adobe Photoshop Level 2 CS5 This course is designed for students who desire the knowledge of the advanced skills in Photoshop CS5. You will enhance your ability in Photoshop to create accurate masks and image effects, retouch images, work with video files, automate repetitive tasks, and integrate with other Adobe applications. Upon successful completion of this course, students will be able to: use image-editing tools in  more...

QuickBooks 2010 This training guide is dedicated to providing you with a flexible, high-performance learning system. This dedication has resulted in a unique and progressive training method. Unlike other training methods that focus on theory or high-tech training products that overwhelm you, this training method provides a simple approach to learning computer software. Each guide is written to assume the user  more...

Comptia Security Security A CompTIA Certification is the primary course you will need to take if your job responsibilities include securing network services, network devices, and network traffic. It is also the main course you will take to prepare for the CompTIA Security examination (exam number SY0-301, JK0-018 ). In this course, you'll build on your knowledge and professional experience with computer hardware,  more...

Visual Basic NET Visual Basic 2008 offers a great deal of functionality in both tools and language. No one course could ever cover Visual Basic 2008 in its entirety. What this course aims to do is to get you started as quickly and easily as possible. It shows you the roadmap, so to speak, of what there is and where to go. Once we've taught you the basics of creating working applications (creating the windows and  more...

Visual Studio Net Introduction Welcome to Visual Studio.NET: Introduction. This course is the recommended course following .NET Framework: Introduction and expands upon the basic concepts you learned about the Visual Studio.NET tool. Now that you have taken the course .NET Framework: Introduction, you understand the basic concepts, features, and possibilities of .NET. With that foundation in place, you are now ready to explore  more...

Adobe InDesign Level 2 CS5 You are familiar with the InDesign environment and managed text, tables, graphics, and colors in documents. You need to know the advanced features in InDesign to create catchy and attractive documents. In this course, you will use the advanced features in InDesign to create documents that are attractive and have the highest degree of perfection. You will also use Adobe InDesign CS5 to create and  more...

Advanced Javascript With Ajax You are familiar with XHTML and basic techniques of JavaScript programming in designing basic web pages. You can make your web pages more dynamic and attractive by providing additional functionality to them. In this course, you will use the advanced techniques in JavaScript programming and Ajax to make your web pages highly functional. Upon successful completion of this course, students will be  more...

Introduction To Programming With C In your day-to-day life, you might have come across various applications that involve software components. All these software applications are developed using programming languages. As a programmer, you would like to create an application that will be of use to your clients. In the C Programming: An Introduction course, you will use object-oriented programming principles to write programs in C .  more...

Adobe CS5 New Features This course is intended for graphic designers, web developers, print professionals, photographers and animators who use Adobe applications as part of the job role. Course Objective: You will familiarize yourself with the new features in Photoshop, Illustrator, InDesign, Flash, and Dreamweaver released as part of Adobe Creative Suite 5. Upon successful completion of this course, students will  more...

Adobe Dreamweaver Level 1 CS5 You may want to make information available on the Internet. To achieve this, you need to create a website. In this course, you will design, build, and upload a website using Dreamweaver. This course is for students who wish to familiarize themselves with the basic techniques used for creating websites using the Adobe Dreamweaver CS5 application. It also provides the fundamental knowledge and  more...

Adobe Dreamweaver Level 2 CS5 You may want to make information available on the Internet. To achieve this, you need to create a website. In this course, you will design, build, and upload a website using Dreamweaver. This course is for students who wish to familiarize themselves with the basic techniques used for creating websites using the Adobe Dreamweaver CS5 application. It also provides the fundamental knowledge and  more...

Photoshop Photo Printing And Color CS5 You are familiar with the Photoshop tools and techniques used to design and create images. Applying the correct image and color correction processes and techniques ensures that you get the desired output while printing images for commercial purposes. In this course, you will learn professional techniques for obtaining consistent, predictable, high quality images in Photoshop CS5. You will learn  more...

Photoshop Web Production CS5 You learn how to use the features in Adobe Photoshop CS5: Web Production to enhance and modify images to meet your requirements. Now, you would want to create and work with images to be used in the web pages. In this course, you will use Photoshop to create and optimize images for the web. You will also stage web page components, arrange them aesthetically, and add interactivity to them. Finally,  more...

Adobe Flash Level 1 CS5 Adobe Flash CS5: Level 1 is the appropriate course for you if you need to create web pages or web page components that contain text, graphics, and animation, and that will display correctly in almost every browser on most computing platforms. The objective is to create Flash-based movies that contain graphics, text, and animations. This course is for professionals who want to develop multimedia  more...

Adobe Flash Level 2 CS5 As a web developer, you want to create engaging experiences for the visitors to your sites. Thus far, you have probably created straightforward HTML or Flash files with simple animations using prebuilt components. In this course, you will create rich Internet applications with Adobe Flash CS5 using ActionScript. The site you create will pull data from external sources, so it will respond to user  more...

Adobe InDesign Level 1 CS5 You are starting to familiarize yourself with print layout and design using InDesign. You would like to learn about the tools and features available to you in InDesign CS5. In this course, you'll work with some of the tools and features to create and deliver eye-catching printed documents. This course is intended for graphic designers, creative professionals, print professionals, publishers,  more...

HTML Level 3 While using the Internet, you might have encountered many websites that are aesthetically appealing and also provide you with world class service. As a web designer, you would like to create and design a website that attracts many users. In the HTML Level 3 course, you will apply the best practices of web design and create a website that enhances the usability and interactivity of the web  more...

PHP Introduction You have created static web pages using HTML. You now desire to use the features of PHP for creating dynamic websites. In this course, you will acquaint yourself with PHP by working with its common script elements, use the PHP script elements to create forms, address the stateless nature of HTTP by setting cookies and session variables in your scripts, and write the data entered in a form to a  more...

Fundamentals Of Databases Using MySQL Storing and accessing data are part of a person's day-to-day activities. One of the most efficient and powerful ways of managing data is by using databases. Information can be stored, linked, and managed using a database application such as MySQL 5.1. In the Fundamentals of Databases Using MySQL course, you will work with the databases using MySQL. You will work with databases by identifying the  more...

SQL You have access to company databases and your job may require you to retrieve data from those databases. Retrieval of information from a database is dependent on precisely ordered logic and specific information. This course will help you to use - SQL: Structured Query Language as a tool to implement that logic, define instructions, and compose SQL queries to retrieve information from the  more...

SQL Level 2 In the course SQL: Fundamentals of Querying (Second Edition), you examined the fundamentals of SQL querying. Because of various business conditions and requirements, in addition to querying the database, you may need to restructure and index tables. You may also need to manipulate the data in the tables. In this course, SQL: Advanced Querying, you will create advanced SQL queries, and manipulate  more...

Making Google Work For You You are familiar with computers and the way they work. Computers have contributed to the rise and spread of the Internet, which has now become the driving force for the networked communities around the globe. In this course, you will use products from Google such as Google Chrome, Google Mail, Google Desktop, iGoogle, and Google Maps to take full advantage of all that the Internet has to offer.  more...

Customer Service Via Phone and Email You need to respond to customer service queries via a remote system such as email or the telephone. In order to do this effectively, you need to develop skills that will help you interact with customers in a positive and professional manner. In this course, you will learn important principles and skills you can utilize as a remote customer service representative. Upon successful completion of  more...

Grammar Essential You learned the rules of grammar in school, but now you'd like to refresh and refine your grammar usage for your professional life. You need to articulate your ideas clearly and succinctly in written communications and present yourself in a professional manner. In this course, you will review the rules of grammar, identify common grammar errors, and refine your business writing style. Upon  more...

Effective Business Writing Though businesses increasingly rely on technology, technological skills alone do not guarantee success in the workplace. You must still develop your ideas, express them clearly, and persuade others of their viability. This course offers effective strategies to sharpen your writing skills by structuring your ideas logically, exercising diplomacy in letters and reports, and shaping your arguments.  more...

Microsoft Outlook 2007 Level 1 This course is the first in a series of three Microsoft Office Outlook courses. It will provide you with the skills you need to start sending and responding to email in Microsoft Outlook 2007, as well as maintaining your Calendar, scheduling meetings, and working with tasks and notes. In this course, you will compose and send email, schedule appointments and meetings, manage contact information  more...

Microsoft Outlook 2007 Level 2 If you have been using Microsoft Office Outlook 2007 as a communications tool, then you know how to send a mail message;schedule appointments and meetings;and create contacts, tasks, and notes. This course is the second in a series of three Microsoft Outlook courses. In this course, you will customize your Outlook environment, calendar, mails, folders, and also track, share, assign, and quickly  more...

Microsoft Outlook 2007 Level 3 This course is the third in a series of Microsoft Office Outlook 2007 courses. It builds on the email and calendaring skills you have already obtained and will provide you with the skills needed to personalize email, organize Outlook items, manage Outlook data files, share and link contacts, save and archive email, create forms, and work offline and remotely. Course Objectives You will work  more...

Microsoft Project 2007 Level 1 You need to gather information about the various tasks involved, resources required to accomplish the tasks, and the overall cost in order to plan a project. Microsoft Office Project Professional 2007 acts as a tool that assists you in managing your projects. In this course, you will create and modify a project plan. Course Objectives You will create a project plan containing tasks, organize  more...

Microsoft Project 2007 Level 2 Microsoft Project 2007: Level 2 is the second course in the Microsoft Project 2007 series. In Microsoft Project 2007: Level 1, you used your project management skills to create a complete project plan. The plans need to be updated and modified regularly to keep the project moving on track. This course will build upon the knowledge gained, and give you the opportunity to work with a project plan  more...

Microsoft Visio Professional 2007 Level 1 Diagrams and charts play a pivotal role in knowledge dissemination, making complex data easy to understand. Microsoft Office Visio Professional 2007 has a host of features that are instrumental in creating pictorial representations of information. In this course, you will learn the essentials of Visio. This course is designed for persons who have an understanding of basic workflows and the  more...

Microsoft Visio Professional 2007 Level 2 Microsoft Office Visio Professional 2007: Level 2 is the second course in the Microsoft Visio 2007 series. In Microsoft Office Visio Professional 2007: Level 1, you used the various templates to design and manage workflows and flowcharts. This course will build upon the knowledge gained, and enable you to work with many advanced features, including using the drawing tools, creating and working  more...