Affairs Web-based Seminars

GMP for Phase 1 Products - Webinar By GlobalCompliancePanel Overview: This presentation will cover the contents of the guidance that was given. FDA has issued as rule that relieves Phase 1 products from complying with the GMP given in 21 CFR 211. At the same time, they ruled that the products must continue to comply with the GMP as given in the Food, Drug, and Cosmetic Act. Guidance was then given to describe these GMP. Tuesday, August 7, 2012 10: 00  more...

RAPS Approved Seminar on Complying with GMP and CGMP Requirements Streamlining Quality Assurance and FDA Compliance at Mumbai Overview: Each lecture will be 90 min in length. There will be morning and afternoon breaks of 30 min each which will be reduced to 15 min, if needed to accommodate long lectures. Lunch will be at least 1 hr in length. The instructor will be available for questions and discussions during all breaks and lunches and will also be available for a minimum of 30 min at the end of each day. The  more...

This Webinar will provide a substantive overview and outline differences between the Technical File and Design Dossier for those This Webinar will provide a substantive overview and outline differences between the Technical File and Design Dossier for those device firms dealing with the global regulatory landscape.  more...

Pharmaceutical and Medical Device Validation Guidances - Similarities and Differences - Webinar By GlobalCompliancePanel Overview: This webinar will provide an overview of process validation for devices and pharmaceuticals. While most of the webinar will include FDA compliance requirements, there will be some International Standards Organization (ISO), European, and Canadian regulations included for exploration. After attending this webinar, attendees will have a greater perspective of process validation and its  more...

Designing a CAPA System that Meets and Exceeds Regulatory Requirements - Webinar By GlobalCompliancePanel Overview: CAPA is the most audited Quality subsystem in any Quality system. Most of the warning letters written by the FDA in 2010 were CAPA relate. Avoiding FDA CAPA findings starts with the design of a robust CAPA SYSTEM. The webinar covers "Off-label statute" and the FDA's nonbinding off-label guidance as relates to re-prints, performance claims, and Promotion. Emphasis is placed on ethical,  more...

Conducting Successful Product Complaint Investigations - Webinar By GlobalCompliancePanel Overview: This webinar will provide valuable assistance and guidance to the life sciences manufacturers engaged in various aspects of product complaint investigations. An effective complaint handling system is an extremely important part of any quality system. Manufacturers should understand that any complaint received on a product shall be evaluated and, if necessary, thoroughly investigated  more...

Requirements of the Master Production Record - Webinar By GlobalCompliancePanel Overview: This program will address the 21CFR and Eudralex Volume 4 requirements and interpretation, as well as FDA Guidance regarding the creation, review and approval, and control of Master Production Records. The material will enable attendees to establish a consistent approach to the design of MPR, including cover page content, instructions, processing requirements and limits, and signature  more...

Best Practices for the Implementation and Use of Test Management Tools - Webinar By GlobalCompliancePanel Overview: As anyone that has been involved in a traditional paper-based validation project can attest to the ability to manage the validation deliverables, timelines, resources, tasks and the compliance of the project can be difficult, resource extensive and time consuming. Most paper-based validation practices require many documents that are managed both electronically (in multiple systems)  more...

Calibration and Qualification in Analytical Laboratories - Webinar By GlobalCompliancePanel Overview: Laboratory equipment should be calibrated and/ or qualified to demonstrate suitability for the intended use. Laboratory systems including equipment are amongst key targets of FDA inspections. They are considered high risk systems because they have a high impact on product quality. Despite the fact that equipment calibration and qualification is nothing new and companies spend a lot of  more...

A Comparison of the Pharmaceutical and Medical Device Good Manufacturing Practices - A Study of Similarities and Differences - W Overview: As a quality professional, you desire to have the very best quality system that operates effectively, efficiently and conforms to the appropriate quality standards to meet customer and user needs. You are also aware that there is a paradigm shift from an emphasis on compliance to an emphasis on quality based systems. An understanding of this paradigm shift can be gained by comparing  more...

Navigating the Regulatory Environment for the Implementation of Alternative Microbiology Technologies - Webinar By GCPanel Overview: Rapid microbiological methods (RMMs) have been implemented by a number of companies around the world. In some cases, it is necessary to work with regulatory authorities in order to effectively introduce a RMM in place of an existing microbiology method. This is especially true if the existing method is incorporated in a previously approved regulatory dossier, such as a New Drug  more...

Validation of ExistingLegacy Computer Systems for FDAEU Compliance - Webinar By GlobalCompliancePanel Overview: When existing or legacy computer systems are used in FDA or equivalent international environments they should be validated, a process sometimes called retrospective validation. While the industry is very well familiar with the validation of new systems, there are many questions about existing or legacy systems. This web seminar will give a good understanding on the regulatory  more...

Off-Label Promotion of Medical Devices Maximizing Your Performance Claims within FDAs Framework of Acceptable Practices - Webina Overview: The webinar covers "Off-label statute" and the FDA's nonbinding off-label guidance as relates to re-prints, performance claims, and Promotion. Emphasis is placed on ethical, moral, and legal expectations from the FDA. You will improve your understanding of regulatory expectations for your products and improve promotional compliance for released products. The webinar is designed to  more...

Bringing Compliance To Design Control For Older Products - Webinar By GlobalCompliancePanel ...story File. The webinar is designed to help regulatory Affairs, Quality Engineers, and Design Engineers maintain released products within current regulatory requirements. As an attendee you will learn what the FDAs expectations for your released products are. You will also learn about the paper trail you are required to maintain to show compliance. Compliance regulations are released by  more...

Validating Rapid Microbiological Methods - Webinar By GlobalCompliancePanel Overview: Method validation is the process used to confirm that an analytical procedure employed for a specific test is reliable, reproducible and suitable for its intended purpose. All analytical methods need to be validated prior to their introduction into routine use, and this is especially true for novel technology platforms, such as rapid microbiological methods (RMMs). Because many RMM  more...

Preparing for Pre-approval Inspections - Webinar By GlobalCompliancePanel Overview: This interactive webinar begins with an overview of the FDA Inspection process. Preparation for the inspection in the months before, the immediate weeks before and on the day of the inspection will be discussed. The Inspection process will be reviewed followed by a detailed look at common focus area areas of Inspectors. Procedures to be followed after the inspection such as  more...

Best practices for conducting OOS investigations - Webinar By GlobalCompliancePanel Overview: This interactive webinar will review the regulatory requirements for an OOS Investigation. The responsibilities of the analyst, the supervisor and QA will be discussed. A detailed flow chart will be used to help the attendees clearly understand the steps and the order in which they are to be performed. Common pitfalls and means of overcoming them at each of the steps will be  more...

Does your Equipment Program meet current regulatory expectations - Webinar By GlobalCompliancePanel Overview: This Interactive webinar will begin with an overview of the GMP/ GLP requirements for an Equipment system. The procedure for Equipment Qualification will be discussed. The system elements required to manage the maintenance and calibration of all equipment in the laboratory will be discussed. The documentation which is critical for GMP/ GLP compliance will be reviewed. Why you  more...

FDAs Proposed Rule Regarding Device Establishment Registration and Listing and How to Register and List - Webinar By GlobalCompl Overview: Device firms, establishments or facilities that are involved in the production and distribution of medical devices intended for use in the U. S are required to register annually. Most establishments that are required to register with the FDA are also required to list the devices that are made there and the activities that are performed on those devices. FDA issued a 28-page Proposed  more...

Medical Device Recalls How to Manage Them and Recent Trends - Webinar By GlobalCompliancePanel Overview: Medical devices are classified into three classes, Class I, II, and III, based on the level of control necessary to assure the safety and effectiveness of the device. Recalls of Class II devices represent 61% of all device recalls over a review period, followed by Class III devices at 28%. This Webinar will provide a recent update on the latest trends and causes for device recalls and  more...

Off-Label Promotion of Drugs - Regulatory Documents Explained - Webinar By GlobalCompliancePanel Overview: Promoting a drug or device for a use not approved by the Food and Drug Administration is illegal. As a result of this practice, called "off-label promotion," life sciences companies have been fined unprecedented amounts of money and their executives have been prosecuted criminally. In addition to the regulatory and criminal consequences of off-label promotion, companies that promote  more...

Hazard Analysis vs FMECA Differences and Commonalities - Webinar By GlobalCompliancePanel Overview: The terms "Hazard and Risk Analysis" and "Failure Mode, Effects and Criticality Analysis (FMECA)" are often used synonymously. However, there are significant differences in both methodologies and their strengths can be combined to ensure a safe and efficacious system design. The presentation will explain both methodologies and will show ways how these tools can be used to complement  more...

Effective Training Practices for FDA Compliance - Webinar By GlobalCompliancePanel Overview: This presentation will answer some of the frequent questions of new trainers or training managers. These include: worker training requirements, the frequency of training, how do design an effective training program, who is responsible for training, training effectives and training documentation. By examining the GMP expectations on training from different regulatory bodies (from the  more...

Water System Biofilm Control and Microbial Monitoring Myths - Webinar By GlobalCompliancePanel Overview: It is an unfortunate fact that most water systems today have been designed and are operated and controlled using at least some traditional concepts and methods that are downright wrong. So how could such traditions become so ingrained and be so wrong? How could well-intentioned benchmarking be so misguided? There are many reasons, which will be discussed, but regardless of the causes,  more...

Electronic Raw Data in Regulated Environments - Definition Recording and Archiving - Webinar By GlobalCompliancePanel Overview: All regulations have strict requirements for electronic raw data and other e-records. The objective is to ensure accuracy, integrity, authenticity, security and availability of records during the entire life from generation to deletion. While the intent is the same for all regulations only FDA's 21 CFR Part 11 and the EU equivalent Annex 11 have well defined requirements but still  more...

Assessing GCP Compliance in Clinical Trial Audits- Risk management and Best practices - Webinar By GlobalCompliancepanel Overview: In this Clinical Trial Audits training learn the risk management and best practices of GCP audit by reviewing and analyzing recent GCP audit finding from Clinical Investigators (Sites), Sponsors, and Institutional Review Boards (IRBs). Why you should attend: Quality assurance is defined as a "systematic and independent examination of trial-related activities and documents" that allows  more...

How to Prepare and Submit a Bullet Proof 510k and Latest FDA Proposed Changes to the Process - Webinar By GlobalCompliancePanel Overview: This 3 hour Webinar is a primer and overview to the premarket notification process, i. e., a 510(k). A 510(k) is a premarket submission made to FDA to demonstrate that your device to be marketed is at least as safe and effective, that is, substantially equivalent, to a legally marketed device that is not subject to PMA. There are three types of Premarket Notification 510(k)s that may  more...

Webinar on Pharmacovigilance Audit - Webinar by GlobalCompliancePanel This webinar will describe how to conduct a thorough drug safety and pharmacovigilance audit, including compliance with applicable worldwide laws, regulations and guidance. In addition, attendees will learn how to compare the company's pharmacovigilance operations to applicable best practices. The course will cover all aspects of drug safety and pharmacovigilance compliance including the  more...

Understanding and Preparing for FDAs New Part 11 Inspection Program - Webinar By GlobalCompliancePanel Overview: Within the next few weeks and months the FDA will conduct a series of Part 11 related inspections. Planned routine inspections will be extended to evaluate the companies' practices to ensure accuracy, integrity, authenticity and availability of electronic records, and the FDA plans additional 'for cause inspections'. Inspections are planned for US but also in foreign countries. The  more...

Medical Device Tracking Latest FDA Update and Expectations - Webinar By GlobalCompliancePanel Overview: The Food and Drug Administration Modernization Act (FDAMA) requires that manufacturers track certain devices when the agency orders them to do so. Tracking is intended to facilitate notification and recall in the event a device presents a serious risk to health that requires prompt attention. The tracking provisions enacted by SMDA required mandatory tracking even if FDA did not issue  more...

Japan - Regulatory Filing Requirements and Compliance Processes for Life Sciences - Part I and Part II - Webinar By GlobalCompli ...l Device Agency) + PAFSC (Pharmaceutical Affairs and Food Sanitation Council) o Patents and Trademark Considerations * Beginning Your Company Involvement in Japan o Local Office and Personnel Requirement Options o Language Requirements o Possible License Types * Objectives of the Rules Governing Medicinal Procedures  more...

Statistical Sampling Plans for Audits - Webinar By GlobalCompliancePanel Overview: The purpose of auditing is to identify failures in the system or gross negligence. The real question, "how bad does the system need to be for auditing to work?" This talk will look at statistical distribution for rare events to show that the sample size needs to larger when the systems are better. This is a paradox for most auditors who when a problem is discovered increase their  more...

A Comparison of ICH Q-10 Quality System and the FDAs Quality Systems Approach QSA to the Pharmaceutical GMPs - Webinar By Global Overview: In September of 2006, the FDA published the Quality System Approach to Pharmaceutical Good Manufacturing Practices which provided a quality orientation to the GMP's Then in June of 2008, The International Conference on Harmonization (ICH) published ICH-Q10, Pharmaceutical Quality System. These guidance documents have provoked thought and raised questions about existing pharmaceutical.  more...

The DHF Technical File and Design Dossier - Similarities Differences and The Future - Webinar by GlobalCompliancePanel This webinar will examine the existing and proposed requiements for the FDA's DHF and the MDD's TF/ DD. Differing purposes / goals. Differing purposes / goals. Required and desirable contents. Areas requiring frequent re-evaluation / update. Similiarities and differences, and future trends. Typical DHF Table of Contents. Technical File or Design Dossier Table of Contents. The importance and  more...

Regulatory Requirements for Medical Device Calibration Programs - Webinar by GlobalCompliancePanel Calibration is an essential component of every Quality Management System (QMS). An effective system includes more than just management of stickers on equipment. This presentation will give you the background need to understand the requirements and effectively implement. The presentation states with the regulatory requirements in the FDAa ™s QSR, ISO 13485, and ISO 9001. After analysis of  more...

Importing and Exporting Medical Devices A Primer on Regulatory Strategy and Requirements Any medical device that is legally in the U. S. may be exported anywhere in the world without prior FDA notification or approval. The export provisions under section 802 of the FD&C Act only applies to unapproved devices. Devices that have not been approved or cleared in the U. S. must follow the export provisions of the FD&C Act. Foreign firms that manufacture medical devices and/ or products  more...

A Guide for Compliance with Document Control Requirements for Food Manufacturers - Webinar by GlobalCompliancePanel An essential part of the Food and Site Security Plan and the Bioterrorism Act. of 2002 section 306. The control of food safety and quality records as required by customers, regulators and internal audit and legal disciplines.  more...

Change Control and Logging in the PCI environment - Webinar by GlobalCompliancePanel Change control in IT environments has been a focus for a decade or so, especially for application changes. In this webinar you will learn: The components of a strong change management program, including specifics on configuration management, system hardening, and compliance review. In addition, the types of logging and monitoring required by the PCI DSS will be discussed which will enable  more...

Important Sterilization Information for Product Developers - Webinar by GlobalCompliancePanel Product developers have the responsibility of the development of medical devices or healthcare products that will be sterilized; however they may not have an adequate understanding of the sterilization processes and its impact to the functionality of the product and its package. This presentation will provide information that can be used by R&D Engineers and Product Developers to aid them in the  more...

Best Practices in Complaint Management - Compliance Webinar by GlobalCompliancePanel Negative customer feedback about a medical device's performance or safety is a strong indicator of whether a firm's manufacturing process is in control. This feedback is therefore subject to many requirements in both the QSR and ISO 13485. Failure to follow up on complaints about medical devices is among the most frequently cited observations on FDA-483s. This session will include the requirements  more...

Defining Architecting and Managing Risk Assessments - Complinace Webinar by GlobalCompliancePanel Risk Assessments are a vital tool in the Risk and Compliance management arsenal. Unless a business knows at any given time what its exposures are, and how they are evolving, the mitigation steps to manage its risks can never be in lockstep with prevailing circumstances or conditions. Concise Risk Assessments are a vital component of any successful Risk based initiative. Intelligent enquiry is  more...

Pharmaceutical Manufacturing Batch Record Review - Webinar by GlobalCompliancePanel The Learning Objectives of this presentation include: * Recognize regulatory (FDA/ EU) requirements for batch records and batch record review * Modeling best practices of a technical review of batch records * Discover the essentials of batch record reviewer qualifications and training * Acquire confidence in determining the final decision or recommendations. * Establish  more...

Auditing a Process-based System - Compliance Training Seminar by GlobalCompliancePanel There are a number of reasons for someone to attend this webinar. First and foremost they will gain an understanding of the process approach. The process approach requires management to identify all processes of the QMS, their sequence and interaction. They must ensure the effectiveness of all processes and the availability of needed resources, and monitor, measure, analyze and improve them. They  more...

Failure Modes and Effects Analysis FMEA - An Effective Tool for Medical Device Risk Management - Compliance Webinar by GlobalCom The presentation will discuss the proper use of FMEA in risk management and how to recognize and avoid the traps associated with this tool in order to have a more efficient risk management process.  more...

How to Survive a DEA Audit - Compliance Webinar by GlobalCompliancePanel This training entitled "How to Survive a DEA Audit" will cover all the record-keeping and security requirements that a DEA registrant must comply with when handling controlled substances and regulated chemicals. It covers all elements of what occurs during an unannounced DEA Diversion inspection and the auditing of all controlled substances and regulated chemicals. As a firm handling these  more...

Conduct Your Own Risk Assessments Following ISO Standard 3100031010 It is essential for any organization to first determine its risk appetite and then to conduct its own self assessment as to its actual risk exposure. The new ISO risk standards provide a straight forward method that is suitable for larger and smaller organizations alike. Aligning your risk appetite with your actual risk exposure can help rationalize and prioritize key business opportunity  more...

Proper Use of Risk Management Tools for ISO 14971 Medical Device Safety - Webinar by GlobalCompliancePanel In this presentation we will use examples of the use of the tools for medical device risk management to complete the risk management process for a sample medical device. During the presentation we will refer to the risk management standard ISO 14971 and its requirements. We will give examples for completing the documentation requirements of the standard. The presentation is intended to give  more...

The FDA Electronic Submission Gateway ESG GlobalCompliancePanel brings a new webinar for the medical devices industry professionals. Webinar will be on March 25, 2010. Webinar will be presented by Albert Cefalo. Mr. Cefalo has a BS degree from Franklin Pierce College and a Graduate certificate in RA from Northeastern University. For the last 21 years he has been employed by Analogic Corporation. Chuck also conducts in-house training on a  more...

Quality Systems Inspection Technique QSIT and How to use it to Your Advantage GlobalCompliancePanel brings a new webinar on the topic of Quality Systems Inspection Technique (QSIT), and How to use it to Your Advantage Webinar will be on March 11, 2010. Webinar will be presented by Jeff Kasoff. Mr. Kasoff is the Director of Regulatory Affairs at Life-Tech, Inc., a leading manufacturer of consumables and instrumentation in the urodynamic and pain management fields. Jeff is  more...

New Requirements for the Medical Device Directive MDD GlobalCompliancePanel brings a new webinar on the topic of New Requirements for the Medical Device Directive (MDD) Webinar will be on March 11, 2010. Webinar will be presented by Albert Cefalo. Mr. Cefalo has a BS degree from Franklin Pierce College and a Graduate certificate in RA from Northeastern University. For the last 21 years he has been employed by Analogic Corporation. During his career  more...

The 510k Submission Requirements Contents and Option GlobalCompliancePanel brings a new webinar on the topic of The 510(k) Submission: Requirements, Contents, and Option. Webinar will be on March 4, 2010. Webinar will be presented by Jeff Kasoff. Mr. Kasoff is the Director of Regulatory Affairs at Life-Tech, Inc., a leading manufacturer of consumables and instrumentation in the urodynamic and pain management fields. Jeff is responsible for  more...

Setting Up and Running a Tougher Supplier Audit Program GlobalCompliancePanel brings a new webinar on the topic of Setting Up and Running a Tougher Supplier Audit Program. Webinar will be on March 2, 2010. Webinar will be presented by John E Lincoln. Mr. Lincoln is a medical device and regulatory affairs consultant. He has helped companies to implement or modify their GMP systems and procedures, product risk management, U. S. FDA responses.  more...

Business, Project and Compliance Risk GlobalCompliancePanel brings a new webinar on the topic of Business, Project and Compliance Risk. Webinar will be on March 2, 2010. Webinar will be presented by Edwin L Bills. Mr. Bills has held a number of quality and regulatory affairs positions. Mr. Bills is ASQ Certified as Quality Engineer, Quality Auditor, and as Manager of Quality/ Organizational Improvement.  more...