Online Any Project eLearning
Any Project Training Provider? - Tell us about your Training!
From 123-CBT Computer Based Training
Statistical Process Control SPC in Six Sigma

Statistical Process Control (SPC) in Six Sigma ASQ Six Sigma Black Belt (SSBB)
Ensuring a process is in control is critical to any Six Sigma project, but how do you determine with certainty if a process is on track or requires improvement? Where do you find the 'proof' or solid facts that a process is out of control and requires intervention? By applying statistical process control (SPC)
more...
Statistical Process Control SPC in Six Sigma
Motivation and Communication in Six Sigma Teams

Motivation and Communication in Six Sigma Teams ASQ Six Sigma Black Belt (SSBB)
Six Sigma teams must possess specific qualities to succeed throughout the development stages of their life cycles. Leaders who know how to facilitate teams will greatly enhance their chances for project success, which in turn will benefit their organizations. Motivation is one essential component that can
more...
Managing Six Sigma Team Performance

Managing Six Sigma Team Performance ASQ Six Sigma Black Belt (SSBB)
Six Sigma Black Belts have the challenging task of managing the full spectrum of personal dynamics that characterize project teams. Each team member provides the team with unique strengths and weaknesses, and combining individuals into a team produces varied results. Besides providing the basic tools and structure for smooth
more...
Tools for Planning and Managing Six Sigma Project Opportunities

Tools for Planning and Managing Six Sigma Project Opportunities ASQ Six Sigma Green Belt (SSGB)
In many situations your results are only as good as the tools you use. Knowing which tools to use, and how to apply them effectively, is the key to any endeavor's success. This assertion holds true for process and quality improvement strategies, and Six Sigma and quality improvement teams
more...
Initiating and Planning a Project

Initiating and Planning a Project
Initiating and Planning are crucial phases in developing and executing any successful project. Companies that are embarking on a new project initiative must assign people to gather facts and decide what exactly they want to produce and how they are going to produce it. This course examines which factors should weigh in during the project selection process
more...
Technology and Implementation Considerations

Technology and Implementation Considerations ITIL ITIL Intermediate Level - Service Capability ITIL® v3 Intermediate: Operational Support & Analysis Exam
Implementing processes and technologies in any organization requires significant planning, analysis and management. Implementing Service Management process capabilities is no different. The method of implementation must be planned,
more...
Using Basic Control Charts in Six Sigma

Using Basic Control Charts in Six Sigma ASQ Six Sigma Green Belt (SSGB)
In a Six Sigma DMAIC project, once you've measured your current processes, analyzed the gaps and causes of problems, and improved processes to the desired level, you need to monitor and control them over an extended period of time. The process may show variation, and control charts are used to determine if the variation
more...
Estimating and Budgeting Project Costs

Estimating and Budgeting Project Costs PMI Certified Associate in Project Management Certified Associate in Project Management (CAPM) - PMBOK Guide - 4th Edition-Aligned
Accurately forecasting the cost of future projects is vital to the success of projects and the survival of any business. Project managers must have the ability to not only identify what work is required at the onset of a
more...
Performing Risk Analysis

... (CAPM) - PMBOK Guide - 4th Edition-Aligned
Risk in any project is unavoidable. It doesn't matter how much experience a project manager has, risks will always be present. Fortunately, there are proven methods to identify and analyze potential threats so that appropriate risk responses are developed and the project's level of exposure is controlled. Risk analysis has become an important
more...
Estimating Activity Resources and Durations

Estimating Activity Resources and Durations PMI Certified Associate in Project Management Certified Associate in Project Management (CAPM) - PMBOK Guide - 4th Edition-Aligned
Resources, such as people, materials, equipment, facilities, money, or a combination of any of these, are fundamental in executing a project, and are required throughout the entire project lifecycle. Determining
more...
Tailoring PRINCE2 reg to a Project Env PRINCE2 2009-aligned

...nt. The good news is that PRINCE2 can be tailored to suit any project environment you might work in. PRINCE2 is a flexible framework that can be tailored to any type or size of project. PRINCE2 is recognized as an international standard for process-based project management. It is the standard method for project management in the UK. This course is designed to assist learners in preparation for
more...
Working with Difficult People Dealing with Micromanagers

Working with Difficult People: Dealing with Micromanagers
Every office seems to have one a person who seems to need to control every aspect and every detail of any situation or project they're involved with. Whether the motivation comes from a desire to ensure success or simply a need to be the center of attention, micromanagers generally do more harm than good. This course introduces you to
more...
Getting Results without Direct Authority Reciprocity

Getting Results without Direct Authority: Reciprocity
One way to get results without authority is to leverage the law of reciprocity. For example, you help someone with a difficult analysis and that person in turn helps you put together a presentation. Or you support a colleague in a meeting, and later you get a key role in that colleague's project. For any trade to be successful, though,
more...
Business Analysis Verify and Validate Requirements

...owing that you need a welding torch will. When working on any project, you also need as much information as possible about anything that may influence it. This might include how much money you have to work with, how long before the project needs to be completed, and who can work on the project. This course provides an overview of requirements analysis activities as prescribed in A Guide to the
more...
Using Surveys to Measure Customer Satisfaction

Using Surveys to Measure Customer Satisfaction
If you're lucky, your customers will complain when they are dissatisfied with your company's service. If you're not so lucky, they'll say nothing and just take their business elsewhere.It's essential that you keep your fingers on the pulse of customer opinion if you are to prevent them defecting to the competition. You need to measure customer
more...
Facilitative Tools and Formats Offering Options

Facilitative Tools and Formats: Offering Options
Looking for some alternatives to the standard work group format? Need to take a different approach to getting a problem resolved? Want to hold a meeting and no one's in the office? If any of these situations sound familiar, this course will provide you with some choices to meet your needs. In this course, you will explore alternatives to the
more...
Preparing for Business Crises

Preparing for Business Crises
Effective preparation is the key to almost any project or undertaking. This is especially true of crisis management, where you actually have to prepare for unforeseen events. This course starts by providing basic background information on business crises. The course then provides specific tools that you can use for anticipating business crises, and processes for
more...
Communication Skills and Project Management

Communication Skills and Project Management ASQ Certified Manager of Quality/Organizational Excellence Manager of Quality / Organizational Excellence
An essential element of management is the ability to effectively communicate with people. The capacity to successfully communicate in today's global economy is a pivotal element to the success of any organization. Managers need to be aware of
more...
Starting Up Initiating Directing a Project PRINCE2 2009-aligned

Starting Up, Initiating & Directing a Project (PRINCE2: 2009-aligned) PRINCE2 PRINCE2 : 2009 Foundation PRINCE2® Foundation
Every good system is based on a framework or architecture that governs its progression from start-up through pulling together all the sub-systems that work together to achieve a desired result. The PRINCE2 project management system is no exception. Its framework
more...
IT Project Management Essentials Monitoring Controlling IT Projects

IT Project Management Essentials: Monitoring & Controlling IT Projects
The aim of project monitoring and control is to compare actual progress and performance against the project plan. An IT project manager must analyze any variances from the plan and identify what actions may need to be taken. If project managers don't monitor their projects on a regular basis, they won't know which tasks
more...
From Online Training Directory
Architecting Web Content (Master Class)-Self Directed


This is a professional level course in architecting and organizing Web content.
In today`s complex world, information systems are becoming more and more complex as their implementations are becoming ever more advanced. Information systems architecture is the underlying structure that defines and controls the interfaces of information systems and which integrates all of the components of the
more...
Architecting Web Content (Master Class)-Self Directed
So You Want to be a Technical Writer!


A 6-week course will introduce you to technical writing as a career.
This 6-week course will introduce you to technical writing as a career. You`ll gain an understanding of what technical writers do, where they work, the skills they need and the tools they use. You`ll learn about job trends and salaries. And you`ll have the opportunity to interact with technical communicators who will be happy to
more...
Application Programming using Visual Basic 6.0 (Beginner/Intermediate/Advanced)


Comprehensive 10 week Visual Basic 6.0 workshop. Learn from a PRO!
In designing several applications using Visual Basic 6.0, this course will demonstrate the versatility of VB to help facilitate most projects related to Windows development, as well as, to help in personal programming endeavors. In the course, focus will be geared on learning proper development of friendly GUI screens, programming
more...
Legal Research and Writing


This course guides students on how to do legal research and writing.
After completing this course, the student is expected to have acquired the basic skills necessary for writing legal documents.
The course is designed to give the student exposure to writing briefs, pleadings, (including motions, complaints, answers, appeals, etc.) and even some basic legal correspondence. The Student should
more...
5 Steps to Effective Persuasive Business Communication



Get quick results with this proven method and technique.
The main objective of this course is to equip you with a proven method and persuasive writing technique.
This course is designed specifically for anyone who wants to get the "target audience" to take action or shift their opinion or point of view. Since no one can be expected to change their mind or take action if they are not predisposed
more...
Learn How To Write Effective Persuasive Written Communication



Perfect short course for those seeking to persuasively communicate with their audience through written communication.
The main objective of this course is to equip you with a proven method and persuasive writing technique.
This course is designed specifically for anyone who wants to get the "target audience" to take action or shift their opinion or point of view. Since no one can be expected to
more...
HyperStudio Basics
This introductory course will provide you with an overview of using HyperStudio. Learn how to create a stack, add cards, buttons and navigation. In addition, discover how to add sound, video, graphics and hyperlinks into your presentation.
HyperStudio Basics is a seven day online course. This class will explore educational applications and implications of hypermedia, provide you with an overview
more...
Advanced Certificate in Technical Writing
A Certificate Program that allows students to engage in a robust course of study that they create and that is specific to their individualized learning needs. Students enrolled in this program will be able to choose from over 20 different topic areas specific to Technical Report Writing and work with a seasoned Senior Technical Writing Practitioner/Educator who will serve to help guide and
more...
Microsoft Project For Purchasing Professionals
Have you struggled with completing your purchasing projects on time? You probably would not have if you used Microsoft Project. By taking the highly personal and interactive online class "Microsoft Project For Purchasing Professionals," you will not only learn how to use the software, you'll learn how to apply it to your purchasing work. You'll also learn project management principles that will
more...
Senior Professional In Supply Management (SPSM ®) Certification Program
Are you tired of not getting enough opportunities, respect, and money out of your purchasing career? Well, guess what? Nothing will change unless you take action towards becoming a world-class purchasing professional. You can earn your purchasing certification in less than 3 months if you devote more than 4 hours per week to this course of study. Accordingly, 2 hours per week will take
more...
Technical Communication Industry Certificate - Mastery Level
Start earning your TCIC Certificate today! This comprehensive program allows you to work at your own pace, take online quizzes to test what you are learning and to submit assignments for instructor review. You will focus on performing audience analyses, determining the purpose and structure for technical documents, utilizing visual and document design, and managing complex documentation projects.
more...
Architecting Web Content (Master Class)
This is a professional level course in architecting and organizing your Web content.
In today`s complex world, information systems are becoming more and more complex as their implementations are becoming ever more advanced. Information systems architecture is the underlying structure that defines and controls the interfaces of information systems and which integrates all of the components of the
more...
From 123-CBT Computer Based Training
Controlling Managing Closing a PRINCE2-aligned Project
In a project management system, processes are the foundation upon which every other aspect of the system stands. Processes provide a controlling structure for establishing what to do and when to do it. The bulk of the project work is done during the stage-related processes, when Stage Plans are implemented and product creation and delivery is monitored, controlled and reported. Once the final
more...
Controlling Managing Closing a PRINCE2-aligned Project
Initial Ongoing Processes in a PRINCE2-aligned Project
Every good system is based on a framework or architecture that governs its progression - from start-up through pulling together all the sub-systems that work together to achieve a desired result. The PRINCE2 project management system is no exception. Its framework consists of eight distinctive processes that define the management activities of a project's life cycle. They encompass all activities
more...
Managing Quality Risk in a PRINCE2-aligned Project
Quality management and risk management go hand in hand. Quality expectations are established at the start of a project. Any deviations from these quality expectations during product development will increase project risk. The goal is to ensure that the customer will approve the quality of the end product and at the same time minimize the risk of impact on the project budget and schedule. Good
more...
Techniques for Managing a PRINCE2-aligned Project
Techniques answer the question ?How?? Project management techniques are procedures that members of a project team use to complete tasks. Experienced Project Managers often keep a toolbox of proven and trusted techniques nearby. They need techniques that are documented and repeatable. Techniques should also be flexible and appropriate for use with any type or size of project. The PRINCE2 project
more...
Cost Management and IT Project Trade-offs
Have any of your IT projects lost money because of inaccurate budgeting or client changes to project scope? This course will help you eliminate budgeting problems by providing you with techniques to manage project costs. It will also provide you with a new approach to manage client changes to reduce negative impacts on project plan and scope changes.
more...
Project Planning Controlling a PRINCE2-aligned Project
An effective project management methodology requires a foundation of core components that allow project managers, project boards, and project team members to organise and control the project management process. These components are the building blocks of good project management. The project management methodology advocated by PRINCE2 includes eight components: Business Case, Organisation, Plans,
more...
Overview of Project Managing a PRINCE2-aligned Project
Project-based operations have become the norm in today's business world. In essence, almost every work effort is a project, from constructing a new building to designing and delivering a new information management system. As projects become the primary method for getting things done and effecting organisational change, it is crucial to choose a good and proven method for managing projects.
more...
Evaluation and Review
So, is it success or failure? It's crucial that you take time to review your completed project and confirm the outcomes. What has been achieved, and what didn't go as planned? And how have you performed personally? Of course, success depends on your ability as an external consultant to continually develop in the role, increase your skills, and make overall improvements in your performance. This
more...
Consulting Skills Building Consulting Relationships

Consulting Skills: Building Consulting Relationships explains how to determine whether your organization could benefit from a consultant's services. It also teaches how to manage internal resistance to consultants, how to communicate effectively with consultants, and what to include in a legally binding consulting contract. Learn To Identify the steps to determine
more...
SAP R 3 Working with v3 0

Course Overview
To fully exploit the functionality of R/3 3.0, business users need to be both confident and proficient in the use of all the main navigational features and systems functionality of SAP. This course is essential study for users of all R/3 modules, regardless of the organization a a s business activities. While confidence in the use of Windows applications is a prerequisite to
more...
Working with SAP R 3 v4 x

Course Overview To fully exploit the functionality of R/3, business users need to be both confident and proficient in the use of all the main navigational features and system functionalities of SAP. This course is essential study for users of all R/3 modules, regardless of the organization's business activities. While confidence in the use of Windows applications is a prerequisite to using
more...
Access XP Fundamentals

Course Overview This course presents the learner with the fundamentals of Microsoft Access 2002. This course guides the learner through the basics of Access databases and covers topics such as creating and modifying databases, and establishing relationships between tables. Learn To Identify advantages of a relational database. Identify the basics of a relational database.
more...
CIW Enterprise Specialist Part 2 CORBA Servers Adv Features Security

This is the second course in a five-part series that covers the building of CORBA servers, and advanced features such as Factory and callback objects, exceptions and DII, and CORBA security. The participant will learn how to use the IDL-to-Java compiler to generate server skeletons and how to implement CORBA objects using these skeletons. Server IDL skeletons, CORBA servers and naming services,
more...
Organizational Skills Time Management

Develop the skills you need to manage your time effectively in Organizational Skills: Time Management. You will use various time management techniques to meet your own deadlines as well as help your employees meet theirs. Learn To Understand the importance of time management. Recognize the myths of time management.
more...
Goal Setting Goal Setting Tools for Managers

In ''Goal Setting: Goal Setting Tools for Managers,'' you will learn how to guide employees and mentees through the goal-setting process. You will learn how to foster an enthusiastic and supportive environment for goal setting as well as how to motivate individuals to continually set new and challenging goals. Learn To Identify the criteria for meaningful
more...
Organizational Crisis Mgmt Anticipating Planning for Crises

This course defines and examines what is meant by Organizational Crisis Management, noting the special need for crisis management in today a a s world. The vital importance to an organization of having a crisis management plan in place is emphasized. The course then covers planning for crises, for example, how to assess your organization's level of preparation and how to forecast potential
more...
Organizational Crisis Mgmt Managing a Crisis

This course focuses on management during and after a crisis. It starts by covering challenges presented by crises, the importance of crisis recognition, and immediate management strategies on sudden crisis outbreak. It then moves on to management of information, decision-making, and managing with regard to legal issues. The final section covers guidelines for managing specific crisis types, for
more...
Organizational Crisis Mgmt Resolving Crises in Organizations

This course underlines the vital importance of effective and controlled communications. Guidelines are presented on handling calls, controlling the communication flow, messages and audiences, and communicating in the crisis aftermath. The course looks at communication with non-media stakeholders, giving particular attention to employees. The final section covers communication with the media,
more...
Team Conflict Resolving Team Conflict

Team Conflict: Resolving Team Conflict offers the student information for identifying, clarifying, and addressing team conflict. The program covers conflict resolution styles, identifies types of team conflict, and gives guidelines for resolving team conflict. Learn To Identify the effects of team conflict. Identify how
more...
Brand Management Fundamentals of Brand Management

Brand Management: Fundamentals of Brand Management introduces students to essential brand information, including common branding terms, the importance of brand value, the characteristics of a good brand name and brand mark, and the responsibilities a brand manager should fulfill. The program also details the role brand management plays in the strategic marketing process, the steps of the consumer
more...
Eliciting Requirements
Requirements elicitation is the gathering or ? "drawing out" ? of system requirements. This is done by communicating with users, customers, and any other stakeholders in the development of a system. It is a pivotal knowledge area of business analysis and, as such, the business analyst must be able to elicit requirements that are complete, clear, correct, and consistent. In this course, learners
more...
From HAZMAT Plans & Programs, Inc
29 CFR 1926 Subpart R Steel Erection

This online course is designed to assist contractors, engineers and architects, and other safety personnel in understanding and complying with the new OSHA 29 CFR 1926 Subpart R, Steel Erection Standard.
Attendees who should enroll in this seminar are those who are in any position of authority relating to any type of structural steel erection, including everyone from the crafts trade to
more...
29 CFR 1926 Subpart R Steel Erection
Green Building Commercial Certification Program

The Green Building Commercial Certification program serves to re-enforce the ideas behind high performance buildings maximizing operational energy savings; improving comfort, health, and safety of occupants and visitors; and limiting detrimental effects on the environment.
This certification program provides instruction in the new methodologies that form the underpinnings of high performance
more...
From Learn Skills
Change Management



Properly managing these changes is vital for achieving a successful transformation from how things are to how things should be. Change management plays an important role in any organisation since the task of managing change is not an easy one. When we say managing change we mean to say that making changes in a planned and systemic fashion. With reference to the IT projects we can say the change in
more...
Change Management
From Michael Management Corporation
WS101 - Winshuttle Transaction


This course teaches the most common end user functions for Winshuttle's Transaction application. Learn how to update and create transactional and master data in SAP from Excel - without any programming! This course is a basic requirement for everyone wanting to work with Winshuttle's Transaction.
Course Goal:
- Learn how to create a new recording
- Auto-map with Excel, validating data
-
more...
WS101 - Winshuttle Transaction
From Performance Innovation LLC
Lean Six Sigma for Transactions and Services
Lean Six Sigma is a systematic methodology that uses tools, training and the project management discipline to improve the performance of any operational process. This Lean Sis Sigma Green Belt program is designed to provide a starting point for your Lean Six Sigma program that will enhance the efficiency and effectiveness of your key process.
This program uses a blended learning approach which
more...
From SowellEAC
SowellEAC Online Enterprise Architect Certification Program



Goal: The goal is to give a mixed group of students, with varying levels of awareness and experience in Enterprise Architecture, an appreciation of the art and science of Enterprise Architecture and to increase their ability to contribute to an Enterprise Architecture team.
Approach: The approach taken in this program is to be as practical as possible. Some theory and philosophy are
more...
SowellEAC Online Enterprise Architect Certification Program
From 6P International, LLC
29 CFR 1926 Subpart R Steel Erection
The Steel Erection course will offer training in procedures required in the new "Steel Erection Standard". Attendees who should attend this seminar are those who are in any position of authority relating to any type of structural steel erection, including everyone from the crafts trade to project managers and construction company owners, and to any other on-site personnel. This course is designed
more...
From B. F Environmental Consultant Inc
Project Management and Six Simga Training Programs- Prep for PMP Certification

Project management as a profession has grown exponentially over the last 30 years. Many organizations recognize the value of project management as an effective way to achieve business results. Project management standards and practices can be found in all industries (i. e. construction, manufacturing, aerospace, and telecommunications) and all disciplines (i. e. engineering, information
more...
From Software Training Academy, Inc
JDBC Programming Rev 5

This one-day course covers the fundamentals of database programming in Java using JDBC (Java Database connectivity) in an incremental fashion, to get the programmer up to speed quickly and then to layer a deeper understanding of JDBC upon that foundation. This course has been designed to work with any of these relational database management systems:
Apache Derby, version 10.1
MySQL, version
more...
From Serebra Learning Corporation
Evaluation and Review
So, is it success or failure? It's crucial that you take time to review your completed project and confirm the outcomes. What has been achieved, and what didn't go as planned? And how have you performed personally? Of course, success depends on your ability as an external consultant to continually develop in the role, increase your skills, and make overall improvements in your performance. This
more...
Introduction to Project Process Groups and Initiating a Project
...ning. The baton handoff is both a result and an input. In any project, there are many baton "handoffs" that must happen, making the whole project highly interactive. During this interactive experience--called a project--there are interrelated processes that must occur. These processes can be grouped into five Process Groups. The art of project management is to understand which processes are
more...
Initiating and Planning a Project
Initiating and Planning are crucial phases in developing and executing any successful project. Companies that are embarking on a new project initiative must assign people to gather facts and decide what exactly they want to produce and how they are going to produce it. This course examines which factors should weigh in during the project selection process and how to effectively plan a project from
more...
Ethics and Professional Knowledge PMBOK aligned
What does being ethical mean? How does one make the best ethical choice in a complex project management environment? What are legal requirements, and how can you spot the moment when conflict of interest has occurred? In today's world, project managers must have a clear comprehension of these ethical responsibilities. Project managers must also be aware of their professional duty to contribute to
more...
Stakeholder Interests and Cultural Diversity PMBOK aligned
As the project manager, you're in the center of the storm. The competing interests of stakeholders--including those of the client, the company, the legal and social environment, and the team itself--are your responsibility. Weighing these interests in the most fair and productive manner is an acquired art you can't afford to neglect. But that's not all. In an increasingly global network, project
more...
Planning Project Procurement and Requesting Seller Responses
...ct Procurement Management, and it is a critical aspect of any project. As you advance in this course, you will gain an understanding of what processes are involved in Project Procurement Management, and how these processes interact with the overall project life cycle. You will also obtain the skills and knowledge required to enable you to: plan purchases and acquisitions, document contractual
more...
Communications Planning and Information Distribution
...Any project requires good communications to manage day-to-day activities and ensure success of the project. Project managers need to understand the processes of Project Communications Management, and how those processes help promote success and resolve differences among project stakeholders. Project managers need to plan out a strategy to ensure that needed information is gathered and produced
more...
Performance Reporting and Stakeholder Management
...Any project requires good communication to manage day-to-day activities and ensure success of the project--project managers need to understand what a communications model is, and how it helps promote success and resolve differences. They need to plan out a strategy to ensure that needed information is gathered and produced efficiently. Finally, the project manager is responsible for
more...
Project Management Overview


Project Management: Overview, the first of eight courses in this curriculum. After the completion of this course you will be able to put the five principal processes of project management into practice. The Prime-Project Management Fundamentals curriculum provides the foundation for the successful start-up, planning, and implementation of projects of any size and scope. Professionals who need to
more...
Project Management Initiating a Project


Project Management: Initiating a Project, is the second of eight courses in this curriculum. After the completion of this course you will be able to identify the five steps involved in initiating a project, define the stakeholders in a project, and identify the six components of a project charter. The Prime-Project Management Fundamentals curriculum provides the foundation for the successful
more...
Project Management Planning a Project Scope


Project Management: Planning Project Scope, is the third of eight courses in this curriculum. After the completion of this course you will be able to identify the components of a project scope statement and create a work breakdown structure. The Prime-Project Management Fundamentals curriculum provides the foundation for the successful start-up, planning, and implementation of projects of any size
more...
Project Management Planning Project Activities


Project Management: Planning Project Activities, is the fourth of eight courses in this curriculum. After the completion of this course you will be able to define project activities, list the steps in creating a project network diagram and identify the steps in creating a Gantt chart. The Prime-Project Management Fundamentals curriculum provides the foundation for the successful start-up,
more...
Project Management Project Cost


Project Management: Planning Project Costs, is the fifth of eight courses in this curriculum. After the completion of this course you will be able to sequence the steps involved in creating a personnel resources matrix, identify three strategies for estimating project costs and list the steps in creating a budget. The Prime-Project Management Fundamentals curriculum provides the foundation for the
more...
Project Management Executing a Project


Project Management: Executing a Project, is the sixth of eight courses in this curriculum. After the completion of this course you will be able to identify the four goals of a project start-up meeting, identify the five guidelines of effective team leadership and provide balanced project communications. The Prime-Project Management Fundamentals curriculum provides the foundation for the successful
more...
Project Management Controlling a Project


Project Management: Controlling a Project, is the seventh of eight courses in this curriculum. After the completion of this course you will be able to identify the six steps of variance analysis and identify four responses to change. The Prime-Project Management Fundamentals curriculum provides the foundation for the successful start-up, planning, and implementation of projects of any size and
more...
Project Management Closing a Project


Project Management: Closing a project, is the last of the eight courses in this curriculum. After the completion of this course you will be able to identify the steps in administrative closure and identify the steps in contract closure. The Prime-Project Management Fundamentals curriculum provides the foundation for the successful start-up, planning, and implementation of projects of any size and
more...
Developing Fundamental Critical Thinking Skills
You may not need an MBA to succeed in the corporate arena, but regardless of position or industry, you do need to be able to analyze, reason, and communicate effectively. These and other critical thinking skills are increasingly consequential as organizational planning and decision making become more distributed and reliant on written and verbal communication factors. Developing Fundamental
more...
Organizational Scope of Critical Thinking
In any complex environment systems are necessary, but they must serve an organization rather than become its masters. This is how Ralph S. Larsen, chairman and chief executive officer of Johnson & Johnson, describes both the need for systems and their inherent risk. Organizational systems, with complex and intricately interrelated components, demand the application of critical thinking to avoid
more...
Averting Problem Performance Simulation
You're the head writer for The Jackie Lewis Show, a TV talk show on a basic cable channel. The six other writers for the show report to you. Recently, one of these writers resigned, so you need to hire a replacement. You will need to avoid hiring a problem performer by selecting the right person. Once you select that person, you'll need to communicate job requirements and provide resources in
more...
Coaching Personalities and Teams Simulation
You are a marketing manager for Dulce Confections, a leading maker of chocolates and other fine candies. Due to changing consumer tastes and an increase in the average age of Dulce's core customer, the company is anxious to change the dated packaging on its flagship candy bar, the Dulce bar. The challenge of the repackaging initiative is to appeal to a younger demographic while not alienating the
more...
Communication Skills and Project Management
An essential element of management is the ability to effectively communicate with people. The capacity to successfully communicate in today's global economy is a pivotal element to the success of any organization. Managers need to be aware of emerging technologies and how these affect international communication. To meet an improvement project's specified goals and objectives, a manager must also
more...
Graphic Design Primer
This WestNet e-Learning module explores the basics of graphic design, including color theory, readability, page layout, and composition as they relate to Web design.
more...
Computer Telephony Integration Implementation
This WestNet e-Learning module introduces the systems approach, and then works through the five key steps of a technology implementation.
more...
Business Contact Manager with Outlook 2007
Microsoft Outlook 2007 with Business Contact Manager helps to save time and improve sales and marketing to ensure excellent customer service by providing customer and contact management in one central location. It allows you to easily manage all your contacts, customer information, and opportunities in one location making it easier to find and manage. It also allows you to create marketing
more...
Project Team - Organising A Project


Project Team - Organising A Project is a comprehensive course that teaches both the philosophy and the practical application of effective project management. The course is entirely self-contained, but it can also be used as a support tool for an existing in-house training course or as the basis for promoting a detailed in-house method. Project Team - Organising A Project will enable you to define
more...
Project Team - Planning A Project


Project Team - Planning A Project is a comprehensive course that teaches both the philosophy and the practical application of effective project management. The course is entirely self-contained, but it can also be used as a support tool for an existing in-house training course or as the basis for promoting a detailed in-house method. Project Team - Planning A Project will enable you to define and
more...
Project Team - Controlling A Project


Project Team - Controlling A Project is a comprehensive course that teaches both the philosophy and the practical application of effective project management. The course is entirely self-contained, but it can also be used as a support tool for an existing in-house training course or as the basis for promoting a detailed in-house method. Project Team - Controlling A Project will enable you to
more...
Microsoft Project for Windows 95 Fundamentals
This multimedia self-paced learning course will instruct you on working with Microsoft Project for Windows 95. The unique Skill Builder instruction uses text, voice, questioning, practice, quizzes and multiple study paths to create a learning environment that enhances your enjoyment and comprehension. Preassessment testing in the beginning of each unit will allow you to have a personalized study
more...
System Analysis and Design
The System Analysis and Design WBT provides an overview of various systems concepts, such as characteristics and elements, in an organization. It also describes the various phases involved in developing a new system and the role of the system analyst. Its discusses various steps and tools used for gathering information that will be required for preliminary investigation. The course identifies the
more...
From Calamus Extension College Ltd
BPhil degree in Homeopathy - distance learning


B. Phil. Homeopathy - distance learning
This accelerated bachelora s degree programme is designed for practising homeopaths, who will normally have a recognised diploma qualification in homeopathy, and who wish to attain bachelora s degree status by submission of an extended project. Practising homeopaths without adequate background for B. Phil. study will need to take a pre-project
more...
MA Independent Studies (Area Studies) - Distance Learning


MA Independent Studies (Area Studies) - Distance Learning
Area studies allows for the multidisciplinary study of a geographical or political region including society and people, geography, history, politics, trade, tourism, conflicts, religions and other aspects of the region.
Programmes may start at any time of year, subject to availability of places.
This degree programme allows the
more...
MA Independent Studies (Politics) - Distance Learning


MA Independent Studies (Politics) - Distance Learning
This degree programme allows the student to plan his/ her own syllabus, identify the areas of knowledge or concentration required, choose suitable textbooks and/ or other media and compile a study plan with particular objectives. Credit can be given for previous studies.
Programmes may start at any time of year, subject to availability
more...
From Rice Consulting Services, Inc
User-Oriented Methods for Software Quality - e-Learning Version

Now, more than ever before, more responsibility is being placed on software users to define and validate the systems they acquire. This course presents two important sides of user involvement in software projects: gathering and documenting user requirements, and testing from the user perspective.
The instructor for this course is Randall Rice, a facilitator and designer of many user acceptance
more...
Gathering Defining and Testing User Requirements - e-Learning Version

Do you find yourself challenged by user requirements? Perhaps you understand the important of good user requirements for software development and testing, but other people in your organization need to be exposed to best practices for user requirements. If so, this is the course for you!
This is a basic course in understanding the process of gathering, defining, testing and managing user
more...
From Sessions College for Professional Design
Advanced Flash Multimedia Projects Course


Flash designers, are you ready to up the ante? If you've mastered the basics of Flash animation and ActionScript, it's time to bring all your skills together to create multimedia experiences that wow users.
In six intensive lessons, training and exercises, you'll learn flash and a creative and self-sufficient approach to developing high-level Flash applications for the Web, CD-ROM, and beyond.
more...
Advanced Graphic Design Course


Graphic design is the art of visual communication, the visual representation of ideas or concepts.
How do you succeed as a graphic designer? Study the movements that shaped today's visual world, and learn how to conceptualize projects, reinvent clich s, create balanced layouts, distill complex information, and motivate your audience.
In this advanced, hands-on course, you'll build skills for
more...
flash experience design


Macromedia Flash provides us with the tools to create new forms of interaction, involving and engaging Web users in ways only hinted at in television and theater.
In this project-based training course, you'll learn how to design interactive Flash environments that deliver a message or tell a story. Narrative tools explored will include Flash event-driven functionality, movie clips, non-linear
more...
Fundamentals of Typography


Explore the critical role of typography in graphic design. Course projects build an understanding of the anatomy of the letterform, the distinguishing features of different typefaces, and creative applications of type. An assured grasp of typography is essential in any visual communication project.
more...
From Lovecchio Consulting
Project Management

To understand the essential aspects of a project, the international reference standards, the organizational needs
To acquire a structured methodology that will address and bring to a successful project of any size in quality, cost and delivery (QCD)
In order to realize a project structure the activity by defining the objectives, tasks and responsibilities, the establishment of the team's
more...
From Wavelength
Wavelength's Instructional Design for Senior Professionals Online [IDSP Online] Certificate Course



Wavelength's Instructional Design for Senior Professionals (IDSP Online) Certificate Course
===============================================================================
(Course Website: http://www. vibrantwavelength. com/ idsp_online. asp? rf=tc)
Who Should Join this Course?
============================
* Training Managers, eLearning Project Managers, Delivery Managers, Content
more...
Wavelength's eLearning for non-eLearning Professionals Certificate Online [ENPC Online] Course



Wavelength's eLearning for Non-eLearning Professionals Certificate Online (ENPC Online) Course
=================================================================================================
(Course Website: http://www. vibrantwavelength. com/ elearning_for_non_elearning_professionals_certificate_online_course. asp? rf=tc)
Who Should Join this Course?
============================
*
more...
Wavelength's Instructional Design and Content Writing Online [IDCWC Online] Certificate Course



Wavelength's Instructional Design and Content Writing Online (IDCWC Online) Certificate Course
===============================================================================
(Course Website: http://www. vibrantwavelength. com/ idcwc_online. asp? rf=tc)
Who Should Join this Course?
============================
* Instructional Designers, Training Professionals, Content Writers,
more...
From Butler Enterprise Systems & Tech LLC
E-Learning with an Learning Management System LMS


We would like to introduce ourselves by giving you over $3, 400 worth
of training, for only $299 (for more details go to:
http://www. globalitu. com/ promos. html).
This comes with a money back guarantee, which is a great way for us to
introduce what we offer with no risk to your organization.
This also comes with over 166 online training courses, and a cost
benefit savings of up to $2,
more...
From SimSkill
SimSkill Projects
Where else do you get the chance to manage and deliver a project in a totally risk-free setting? Where any errors made don't end up in one of those discussions you would rather not have to have with the sponsor or key stakeholders?
SimSkill is thrilled to bring to you SimSkill Projects: Master Course - a one of its kind simulation program that gives participants the chance to run a project from
more...
From PDHengineer. com-Decatur Professional Development, LLC
Continuous Commissioning - Maximizing Building Energy Efficiency and Comfort
Overview Building commissioning has emerged as the preferred method of ensuring that building systems are installed and operated to provide the performance envisioned by the designer. While most commissioning processes focus on bringing building operation to the original design intent, Continuous Commissioning is different. Continuous Commissioning focuses on optimizing HVAC system operation
more...
Operational Efficiency - O M Best Practices
Effective O&M is one of the most cost-effective methods for ensuring reliability, safety, and energy efficiency. Inadequate maintenance of energy-using systems is a major cause of energy waste in both the federal government and the private sector. Energy losses from steam, water and air leaks, uninsulated lines, maladjusted or inoperable controls, and other losses from poor maintenance are often
more...
Reducing Lead Hazards During Residential Renovations
Most homes built before 1978 contain some lead-based paint. Lead-based paint was more common and was used more extensively in homes built before 1950. This course provides step-by-step instructions and illustrations, which explain and show what you need to do to protect you and your clients if you are working in older housing that could contain lead paint. The listed procedures will reduce the
more...
Indoor Environmental Quality
Overview Indoor air quality (IAQ) problems can be caused (or avoided) at virtually any stage in the design, construction, and operation of any facility. During building design, such issues as roof overhangs (to keep out rain), location of outside air inlet ports, glazing specifications (relative to potential condensation and mold growth), formaldehyde content of cabinetry, and entryway design
more...
Building Security Initiatives Energy Savings and Trade-offs
Overview Since September 2001, most public agencies and many private firms have focused (or sometimes re-focused) attention on security issues, especially in high-visibility public gathering places and government workplaces. For DOE's Office of Energy Efficiency and Renewable Energy (DOE/EERE), this new focus on security may create both opportunities and challenges for its primary mission
more...
Lab Design for Energy Savings
Overview As a building type, the laboratory demands our attention; what the cathedral was to the 14th century, the train station was to the 19th century, and the office building was to the 20th century, the laboratory is to the 21st century. Unfortunately, a laboratory is also a prodigious consumer of natural resources. The challenge for architects, engineers, and other building professionals
more...
Crawlspace Construction of Buildings Located in Special Flood Hazard Areas
This one-hour course is based on the FEMA construction guidelines for crawlspace foundations used for residential buildings, which are located in Special Flood Hazard Areas (SFHAs). Crawlspace foundations are commonly used to elevate the lowest floors of residential buildings located in Special Flood Hazard Areas (SFHAs) above the Base Flood Elevation (BFE). This course provides guidance on
more...
Design and Construction Guidance for Breakaway Walls
This (one-hour) course is based on the FEMA construction guidelines for ? breakaway? walls used below Elevated Coastal Buildings. In Coastal High Hazard Areas (Zones V, VE, and V1-30), the National Flood Insurance Program (NFIP) regulations require that communities participating in the program adopt floodplain management ordinances or laws requiring that all new and substantially improved
more...
Mold in the Workplace
Overview Mold is a hot topic, THE hot topic of concern in the building industry today. This is because it is generally one of those unquantifiable variables for most people and even most "experts". This is because each human being that inhabits a building is a unique person with unique physical and mental attributes that may or may not make many molds problematic for them. In this
more...
Insulation Basics
Overview In today's building industry, there are several commercial type buildings that are using building techniques similar to residential construction with respect to materials and installation details for slabs, underground foundation walls, exterior above ground walls, ceilings, attics and roofs. Although the building codes for commercial construction are different than those for
more...
Energy Saving Initiatives - Residential and Light Commercial
Overview In this course the student will learn some of the basic techniques involved with energy savings in the buildings that are typical of both residential and light commercial multi-family facilities. The source documents is written around residential type building construction; however the student will learn that some of the basic energy saving principles used in residential construction
more...
Sustainable Design - Integrated Building Design Building Envelope Energy Saving Opportunities
Overview Integrated building design is a process of design in which multiple disciplines and seemingly unrelated aspects of design are integrated in a manner that permits synergistic benefits to be realized. The goal is to achieve high performance and multiple benefits at a lower cost than the total for all the components combined. This process often includes integrating green design strategies
more...
Water and Wastewater Design in Buildings
Overview Sustainable design involves integration of multiple disciplines. The goal of effective water management is to reduce water consumption without compromising the performance of equipment and fixtures. Using water more efficiently is a green strategy for several reasons: it reduces pressure on sometimes-limited water resources, reduces the amount of energy and chemicals used for water and
more...
Heating and Cooling System Upgrades - Energy Star
Overview Heating and cooling systems are the largest single consumers of energy in buildings. These systems condition the air within a building so that occupants are comfortable. Heating and cooling systems consist mainly of chillers, boilers, cooling towers, and pumps. There are central heating and cooling systems, and unitary systems that combine heating and cooling. Opportunities exist for
more...
Building Envelope Airtightness
Overview Infiltration in commercial buildings can have many negative consequences, including reduced thermal comfort, interference with the proper operation of mechanical ventilation systems, degraded indoor air quality, moisture damage of building envelope components, and increased energy consumption. The objective of the study used for this course was to investigate the impact of envelope
more...
Reconstruction Standards for Historic Buildings
Overview This (two-hour) course will be specifically based on the portion of those standards and guidelines, which concern "Reconstruction" of historic buildings. Reconstruction is defined as the act or process of depicting, by means of new construction, the form, features, and detailing of a non-surviving site, landscape, building, structure, or object for the purpose of replicating
more...
Commercial Heat Pump Water Heaters
Overview The commercial HPWH is one of many energy-efficient technologies which have been carried through the R&D stage and brought to market. A heat pump water heater is an effective and efficient way to provide hot water for commercial buildings. The system uses a water heating heat pump to move heat from a cool reservoir such as air and transfer this heat into water. The system employs
more...
Energy Star Label for Buildings
This two hour course specifically reviews the preparation of a Statement of Energy Performance, which is a stand-alone document designed to communicate not only a building's energy performance, but also its physical characteristics, operating characteristics, and conformance to current indoor environmental standards. Once validated by a professional engineer (PE), the Statement of Energy
more...
Moisture Intrusion and High Ambient Humidity Causation Analysis
This course provides a good overview of the various causes of undesired high humidity and moisture intrusion within building structures, and the methods and technology used to analyze such conditions. Recommending or designing an engineered solution to such problems requires a fundamental understanding of their root cause. Field engineers and design engineers who are involved with forensic
more...
Modulating Condensing Fuel-Fired Water Heaters and Hydronic Boilers
A modulating/condensing fuel-fired water heater or hydronic boiler can avoid losses associated, in conventional units, with cycling at less than full load and with unrecovered latent heat of water produced in the combustion process. A system which incorporates features that minimize cycling by modulating fuel and air flow to the combustor and that recover additional heat from condensing moisture
more...
Ensuring That Structures Built on Fill Are Reasonably Safe From Flooding
This (two-hour) course is based on the FEMA construction guidelines for ensuring that structures built on fill are reasonably safe from flooding. FEMA identifies and maps flood hazard areas nationwide by conducting flood hazard studies and publishing Flood Insurance Rate Maps (FIRMs). These flood hazard areas, referred to as Special Flood Hazard Areas (SFHAs), are based on a flood having a
more...
Green Roofs
Because of their many energy-saving and environmental benefits, green roofs are a promising technology for energy-efficient buildings. In a green roof, a layer of vegetation covers the surface of a roof to provide shade, cool indoor and outdoor temperatures, provide storm water management, and more. In this course the student will learn about the benefits of green roofs, estimated savings and
more...
Designing Radon-Resistant Homes
Overview Radon is a colorless, odorless, radioactive gas, which is found in all homes in varying amounts depending on the locality. Radon levels are measured in picocuries per liter of air (pCi/L) where a picocurie is a measure of radioactivity. The national average level within homes is about 1.3 (pCi/L). Not everyone who is exposed to elevated levels of radon gas will develop lung cancer, but
more...
Reduction of Radon Levels in Schools and Other Large Buildings
Overview Radon is a naturally occurring radioactive gas in ambient air. It can also accumulate in varying amounts in enclosed buildings. Radon is estimated to cause many thousands of lung cancer deaths each year. In fact, the Surgeon General has warned that radon is the second leading cause of lung cancer in the U.S. today. Our increased understanding of the risks posed by indoor radon has
more...
Preservation Standards for Historic Buildings
Overview The Secretary of the Interior is responsible for establishing professional standards and providing advice on the preservation and protection of all cultural resources listed in or eligible for listing in the National Register of Historic Places. The Secretary of the Interior's Standards for the Treatment of Historic Properties, apply to all proposed development grant-in-aid
more...
Rehabilitation Standards for Historic Buildings
Overview The Secretary of the Interior is responsible for establishing professional standards and providing advice on the preservation and protection of all cultural resources listed in or eligible for listing in the National Register of Historic Places. The Secretary of the Interior's Standards for the Treatment of Historic Properties, apply to all proposed development grant-in-aid
more...
Restoration Standards for Historic Buildings
Overview Rather than maintaining and preserving a building as it has evolved over time, the expressed goal of the Standards for Restoration and Guidelines for Restoring Historic Buildings is to make the building appear as it did at a particular-and most significant-time in its history. As opposed to other treatments, the scope of work in Restoration can include removal of features from other
more...
Laboratory Building Energy Analysis
Overview Because laboratories use a high amount of energy, often more than five times as much per square foot as an office building, it is important to find cost-effective ways to reduce their energy use and costs. In this course the student will learn about energy efficiency strategies including reducing the air flow during unoccupied periods, variable-air-volume systems, lower static
more...
Spectrally Selective Window Glazings
Spectrally selective glazing is window glass that permits some portions of the solar spectrum to enter a building while blocking others. This high-performance glazing admits as much daylight as possible while preventing transmission of as much solar heat as possible. In this course the student will learn about the low-emissivity spectrally selective fenestration glazing benefits, energy savings
more...
Energy Policy Act of 2005 - Title I - Energy Efficiency
This 4-hour course reviews Title I of the Energy Policy Act of 2005. Title I of the Act concerns energy efficiency improvements in the United States. Title I of the Act amends many existing programs related to energy efficiency in Federal buildings, State energy efficiency programs, and programs that address the energy efficiency of commercial products. This is the portion of the Title that
more...
Residential Guide to Earthquake Design and Construction - Part 2
The purpose of this course is to familiarize the engineer with the basic principles of earthquake-resistant design for residential construction. Adequate construction is required in order for a structure to fair well during and after an earthquake. This course will cover the general earthquake-resistance requirements in the International Residential Code, IRC, along with typical construction
more...
Residential Guide to Earthquake Design and Construction - Part 1
The purpose of this course is to familiarize the engineer with the basic principles of earthquake-resistant design for residential construction. Adequate construction is required in order for a structure to fair well during and after an earthquake. This course will cover the general earthquake-resistance requirements in the International Residential Code, IRC, and requirements for foundation and
more...
Energy Savings in Building Electrical Mechanical and Plumbing Systems
Overview In today's building industry, the concept of integrated sustainable design has taken root and is branching out into full blossom. Green is in. Green is considered the responsible way to design. Integrated design is a process whereby the various disciplines involved in design-architect, mechanical engineer, electrical engineer, interior design professional, etc.-work together to
more...
Design of Commercial Buildings to Mitigate Terrorist Attacks
Overview The purpose of this course is to introduce concepts that can help building designers and building owners to mitigate the threat of terrorist attacks on new buildings. This course specifically addresses four high-population, private-sector building types: commercial office, retail, multi-family residential, and light industrial, although many of the concepts presented are also
more...
Agitator Design Principles for Pharmaceutical and Biotechnology Applications
This course presents a rather intense introduction to the major principles of agitator process design, as applied to liquid and gas-liquid systems as commonly found in the Bioprocessing and Pharmaceutical industries. A brief introduction is given to the basics of agitation theory as applicable, but the emphasis is on practical application of theory, rather than as an academic treatise. Specific
more...
Developing a High Performance Project Team
...eds of millions of dollars. This course is designed for any project manager or project engineer that would like to consider a way to speed the forming stage, potentially eliminate the storming, and get to ? performing? more quickly than in the traditional manner. This course takes the student beyond the traditional two or three teambuilding meetings that may occur with a large project to
more...
Preparing to Lead
Human Resource professionals know that the quality of the relationship between employees and their immediate supervisor is the primary factor that determines the employee? s performance, productivity, and morale. The best way to recruit and retain employees is for an employer to develop the organization? s leadership skills from top to bottom. This course will be an essential tool for those
more...
Project Negotiation Skills - Strategies and Tactics
...uct vendor would look like and how we can establish it on any project. We include suggestions for a Request for Information (RFI), a Request for Proposal (RFP), and developing measurements for subjective ? fuzzy? topics. It does do not discuss developing or negotiating contracts, risk management, nor provide legal advice. Those topics are beyond the scope of this work. The student must
more...
Presentation Skills for Engineers
Overview This course enhances the engineer's ability to deliver more effective presentations. With better presentation skills, the engineer is more able to accurately transfer technical knowledge to the listening audience. The engineer will learn the ten questions to be answered before developing the presentation, general ideas on presentation organization, points for improving delivery
more...
PC Fundamentals for Design Professionals
Overview The goal of this 1-hour online course is to provide a basic understanding of what's inside the Personal Computer that you use every day. Much of this knowledge will even apply to much larger computers. The content is geared for design professionals, but is understandable and usable by anyone. After completing this course, you should have a better understanding of your Personal
more...
Writing Special Provisions
This course covers the general format, content and purpose of a Special Provision that could be used in a set of contract documents for an infrastructure project such as a roadway, drainage or utility improvement. The course describes the basic format of a Special Provision by defining its purpose, identifies the various types of Special Provisions, and explains the importance of proper grammar
more...
Managing Teams in the Workplace
Overview Research studies suggest that employees who indicated better interpersonal relationships with supervisors and co-workers report higher levels of job satisfaction (Valerius L., Shinew, K. & Waut, J. (1996). Job satisfaction and interpersonal relationships often develop as a result of teamwork within organizations. Hence, contemporary organizations have placed an increasing emphasis
more...
Energy Management Mistakes in Industrial and Commercial Facilities
Overview In every industry, from retail outlets to manufacturing plants, energy costs are a large part of each facility's operating expenses. With energy costs continuing to rise, it is imperative that businesses learn to manage their energy consumption. What does this mean? What is energy management and what are some of the common mistakes that I, as an engineer or manager, should be
more...
Contract Writing for Engineers
Overview As a professional engineer, you will likely be called upon to write (or at least review) contracts at some point in your career. If you intend to bid on a project, purchase equipment or hire a sub-contractor, a contract will be required. Except for the simplest of transactions, almost all agreements to provide a product or a service for commercial, industrial, or government work will
more...
PC Networking for Design Professionals
Overview Networking our computers has become a necessity for professionals in the design and construction fields... even in the smallest of offices. This 2-hour online course introduces you to today's most commonly used networking technologies. It will help you to become familiar with networking lingo so that you can speak the same language as your favorite IT person, familiarize you with
more...
Analyzing Employee Performance Problems
This online course will teach you how to analyze employee performance problems quickly and identify methods of dealing with them effectively. It takes you systematically through ten sequential steps to discover whether something that management controls is the root of the problem. This technique allows managers to retain good will with employees by looking at reasons other than the employee first
more...
Understanding Performance and Productivity
This course will help you understand the ? why? behind work performance principles and help you develop the ? how? that is best for your situation. There is a significant difference between being busy and being productive and a simple way to make sure your employees are always productive. Additionally, participants will learn to define productivity and identify the difference between work
more...
Motivating People
This course is a practical approach to the concept of motivation: what it is, what it means to different people, how to discover what motivates different people, and how to create a motivational culture in a workplace. There are several thought-provoking questions to help the student apply the course to themselves and their workplace in a simple, consistent, and straightforward manner. The
more...
Conflict - Understanding and Managing
Conflict is part of everyday work life. We may not even notice only minor irritations because we are so used to them. However, these can easily build into something that can cause great tension within a work team. This course will help you identify typical reasons for conflict, the three escalating stages of it, and devise strategies for preventing it from getting disruptive. There is also a
more...
Preparing and Presenting Technical Information
This course takes you step by step through the process of preparing and delivering a clear and lucid technical presentation at scientific and professional meetings. The guidance provided is also applicable to the preparation and delivery of less formal presentations, such as those given in the form of internal company reports to corporate executives or as lectures prepared and delivered by
more...
Personal Computers for Engineers How to Keep Your Computer Safe and Functional
The personal computer has become an indispensable tool in the practice of engineering. Many engineers now rely on their computer more than their calculator, more than their phone ? in fact, more than any other instrument. If you rely on a personal computer or laptop to send emails, write reports, and perform calculations, then you have likely experienced at some point the frustration of a slow
more...
Technical Writing for Engineers
Overview Effective communication skills are essential to your professional development. This course provides engineers with the tools necessary to write effective specifications, reports, letters, contracts and other documentation required in an engineer's professional practice. Patent writing, video-script writing and copyrighting are also covered. The student must take a multiple-choice
more...
How to Give an Effective PowerPoint Presentation
This three-hour course contains specific advice and guidance on how to use The Microsoft PowerPoint presentation program to give effective presentations. The course provides general guidance on the use of text, color, bullets, visuals, and special effects in presentations. Tips are included on how to use a few of the unique features of PowerPoint. The student must take a multiple-choice quiz
more...
Report Writing for Engineers
Nearly every project, development, or study calls for concluding paperwork; some sort of a report. There have been many reminders and cartoons saying that ? the job is not finished until the paperwork is done? . But often there is reluctance on the part of those involved to pursue the task of preparing a report. This course explains why some of the reluctance appears, suggests a technology-based
more...
Power and Influence Getting It - Keeping It
This course is designed for students who are in a low level of management and want to learn how to maximize their influence for opportunities of professional growth through helping others become more successful. Additionally, this course is also useful for students who, although not currently in a management position, want to be as prepared as possible for when the opportunity occurs, or simply
more...
Interest Rates
Have you ever wondered what makes up an interest rate? Curious as to how the Federal Government influences the cost of borrowing money? Have you ever wondered ? what is the appropriate interest rate to use in a financial analysis? ? This course can help you understand what makes up an interest rate and how the cost of money is ultimately determined. This course is a basic primer on interest rates
more...
Budget Concepts for Non-Financial Leaders
This course is designed to help those in mid-level or line leadership positions in organizations or projects who do not have financial backgrounds to understand more about the behind-the-scenes activities involved in selecting, collecting, and monitoring data involved in typical budget development. It will help leaders who do have strong financial backgrounds develop their subordinates?
more...
Do It Yourself Teambuilding
...any project engineers and managers believe that people assigned to projects will automatically be as productive as possible because they are professionals and they are ? supposed to? . The reality, however, is often much different because levels of individual commitment are based upon the team member? s perceptions of shared risks, rewards, threats, and opportunities. This course teaches
more...
How to Develop or Save A Project Team
The title of this course, How to Develop (or Save) a Project Team, may sound like it is trying to cover two completely different concepts at the same time. ? How can you discuss developing and saving a project team in the same course?? is a reasonable question. If you consider there is a strong possibility that the reason a team needs saving is because it was not developed correctly in the first
more...
Civil Behavior in the Workplace - A Manager s Perspective
There has been a steady increase of lawsuits in our country stemming from behavioral issues in the workplace. This litigation is very expensive from financial and productivity standpoints of employers and financial and career impact standpoints of employees. You can do a lot to protect yourself from negative financial and career impacts by learning what your employer expects you to do. Also,
more...
Interviewing Effectively - How to Select the People You Really Need
For many people, making a successful hiring selection is a lot like describing their taste in art: "I'm not sure how to describe it but I'll know it when I see it " Think back to the last time you interviewed an applicant. If you are like many others without interview training, you may have found yourself doing more talking than listening rather than learning about his or her strengths
more...
Financial Analysis for the Professional Engineer
The course advances the professionalism of engineers and engineering-managers/owners through the language of finance and accounting. Financial mathematical tools are introduced or re-introduced into the engineer? s project planning and budgeting analysis so that the PE can interact with other professions including senior and executive management and stakeholders of the operations. Participants
more...
Leading Change - A Practical Guidebook
This four-hour course will help those assigned to take a principle role in an organization? s change initiative to develop a useful, step-by-step strategy for change. It provides a broad understanding about the nature of change, tips on developing a heart-engaging vision statement designed to mobilize the workforce toward the desired future, how to determine an organization? s readiness for
more...
Delegation and Empowerment What Why When and How
There are many management topics that will teach you about coping in a world of rapid change, managing productivity, tips on goal setting, and the need for dividing the existing work among employees via delegation. It doesn? t take a rocket scientist to realize that a shared workload gets accomplished quicker with less wear-and-tear on each participant. There aren? t as many resources, though,
more...
Measuring Performance and Productivity
This course will help you apply the foundation taught in Understanding Performance and Productivity (Course #BS-2005) to real work settings. Students can use these practical tools to construct performance measurements processes that include graduated performance levels, feedback loops, and defensible documentation of results for ? hard? and ? soft? skills as well as any activity requiring a
more...
Financial Proposals - The Why and How
This course provides the ? big picture? to anyone with the responsibility of developing and presenting a financial proposal for new equipment, staffing, reorganization, or additional resources. First, we introduce the essential elements that are critical to a successful proposal. Without all of these, you are just wasting time and risk damaging your credibility. Next is the selection of the
more...
How to Read a Financial Statement
This five-hour course explains how to read and interpret the financial statements of a business enterprise. This is not an accounting course, but accounting is the language of business and it is important for the understanding of the financial well being of a business. The course reviews the basic financial statements including the balance sheet, income statement, statement of cash flows, and
more...
Creating and Retaining a Diverse and Productive Workforce
Major league baseball broke the color barrier not because of social consciousness but because they could no longer ignore the talented black players who performed so superbly. This course will teach you how to work with senior management in your organization as an internal consultant to focus on performance measurements and issues that will help create and retain a diverse and productive
more...
Creating an Effective Project Team Performance Assessment Process
This online course will teach you how to develop an easy-to-manage performance assessment system for project team members that provides fair and objective assessment within a typical project matrix organization. It will help you develop objective and measurable performance expectations for the ? hard? and ? soft? skills that are essential to a project? s success. It gives the employee a way to
more...
Negotiating Skills for the Workplace
Participants will learn some very simple, yet powerful, principals about negotiations that are applicable in any situation. Whether you are very confident and assertive or introverted and compliant, these techniques will help you prepare for and conduct negotiations more successfully than you ever have before. You will also learn how to identify and counter some of the typical 'dirty tricks'
more...
Preparing to Succeed - Charting Your Own Self-Development
The US Army used to have this slogan: ? Be All You Can Be? as a recruiting enticement because it knew many young people really did not have an idea of what their future held - or what they wanted it to hold for them. Many people feel it is the obligation of their employer to help them develop their career. Human Resource professionals know that employers with strong employee development programs
more...
Leadership Fundamentals I
This online course will teach you how to develop practical leadership skills for use with any workforce regardless of educational, professional, or social background. You will learn effective and proven techniques in motivating people, setting effective performance objectives, assessing that performance easily, and coaching for performance. You will receive tools that you can use immediately in
more...
Leadership Fundamentals II
This online course will teach you how to develop practical leadership skills for use with any workforce regardless of educational, professional, or social background. You will learn effective and proven techniques in dealing with employee conflict, counseling employees effectively on work performance issues, a guide to developing an effective work team, problem solving with employees, and
more...
Leading the Multi-Generational Workforce
Recorded history shows us there has always been concern about generational differences. Excavations of Roman ruins dated hundreds of years B.C. provided translated statements of alarmed city officials talking about their problems with the younger generation and wondering what will become of their society when the ? stabilizing influence? of their elders passes away. Technological advances in
more...
No Cost Ways to Increase Productivity
Systematic explanations and guidance help users understand what may be limiting productivity so they can either make changes themselves or gain the support of senior management for help in doing so. The objective of this course is to provide guidance to motivated individuals who want to improve the productive environment at their workplace without incurring significant expense. The student must
more...
Manage Productivity to Maximize Profit
This course is for people wanting to understand the design and management of efficient work processes in any environment for any product. Public organizations will benefit as much as private because work efficiency and productivity is essential to both. The concepts presented here are universal whether processing legal documents or building toasters on an assembly line. Plenty of practice
more...
Finance and Accounting for Engineers
The scope of this seminar is to provide an overview of important principles in the fields of finance and accounting. This self study course caters to Engineers, Technicians and Technical Managers. Most Engineers, Technicians and Technical Managers feel inadequately equipped for understanding certain important finance and accounting principles and tools. Understanding of finance and accounting
more...
Understanding Roundabouts
Overview Traffic circles have been used in the U.S. since 1905. The modern roundabout, developed in the United Kingdom, was developed to rectify problems associated with traffic circles. This course will provide information that will guide the engineer in planning, designing and constructing several types of roundabouts. Several traffic scenarios will be provided along with information to get a
more...
Low Cost Shore Protection
Overview The purpose of this course is to familiarize engineers with various established methods of low cost shore protection. It is written for the individual who is knowledgeable in general civil engineering design and construction, but is not a specialist in coastal engineering or shoreline protection. In distinguishing between low cost and cheap, one should remember that practically any
more...
Design and Construction of Levees
Levees are used to provide flood protection along waterways. Levees protect agricultural land as well as urban areas. Unfortunately, levees gained notoriety following Hurricane Katrina in 2005 when several levees failed in Louisiana causing mass flooding to the city of New Orleans. Levees can fail for several reasons, some can be man-made and some by events of nature. This course will review the
more...
Geothermal Energy Basics
Overview Geothermal energy uses the flow of thermal energy from beneath the Earth's surface to heat homes and businesses and generate electricity. Geothermal energy is also used in many industrial and commercial applications, such as agriculture, fish farming, food dehydration, gold processing and milk pasteurizing. Geothermal energy has many advantages over other forms of energy. It is
more...
Small Water Systems - Water Sources
Overview When selecting the source for a small water system, the design engineer must consider many factors including the quantity and quality of water from the source, as well as development, operation, maintenance and monitoring costs. Connection to an existing water system is usually the best option when it is economically feasible. However, development of groundwater or surface water
more...
Lateral Earth Pressure for Non-Geotechnical Engineers
Overview This course is intended for a wide range audience and in particular, the non-geotechnical engineer and is not intended as an exhaustive review of the subject. The objective of the course is to discuss the three types of lateral earth pressure (at rest, active and passive) that apply to a wall or bulkhead and describe how each is calculated. The course also describes other types of
more...
Low-Density Concrete Properties
Overview The use of low-density concrete provides several advantages with the primary, and most obvious, benefit being a 15 to 25 savings in weight without sacrificing the overall strength of a structure. However, the use of low-density concrete can result in a considerable impact to the structural design and cost of the structure. In this course, the student will review Engineer Circular (EC)
more...
Low-Density Concrete Construction Considerations
Overview In general, concrete construction using low-density concrete is quite similar to using normal-density concrete. Constructability considerations related to mixing, placing, curing, pumping, and testing controls must be addressed in order to maximize the quality of concrete and avoid problems during construction. The use of low-density concrete provides several advantages with the
more...
Maintenance of Concrete
Overview Concrete can deteriorate over time due to a number of factors including moisture penetration, chemical attack and physical damage. Selection of a suitable coating system, combined with proper surface preparation, application and curing of the coating, can significantly increase the service life of concrete subjected to harsh operating environments. Aesthetics are also an important
more...
Potable Water - Membrane Filtration
Overview A membrane is a material capable of separating substances when a driving force is applied across the membrane. Relative to traditional potable water treatment processes that focus on liquid-solid separation, membranes are more effective at removing dissolved contaminants from source water. Thus, the popularity of membrane filtration has increased as drinking water standards have become
more...
Drainage Design Truly Understand What Year Event Really Means
Overview Hydrologic analysis and results are statistically based. The term 'year event' is the common way to express the hydrologic magnitude of precipitation and runoff quantities, but it does not tell the entire story. What does it really mean? Discussing drainage and flood issues with the general public and policymakers sometimes needs more than thinking just in terms of 'year
more...
Placement of Concrete in Hot Weather
Overview This course will briefly discuss the challenges of placing concrete in hot, dry, and windy weather. The placement of durable, quality concrete is a task that requires experience and a commitment to quality. Hot weather imposes additional obstacles that must be understood and addressed. Once the negative impact of hot weather on concrete is understood, procedures can be implemented to
more...
Introduction to Accurate Water Demand Projection
Overview Accurate water demand projection is essential for a municipality to plan and budget to meet the future needs of the citizens in the community. However, many factors can influence the future water demand for a community, including population growth, changes in demographics, the effectiveness of water conservation initiatives, new low-demand plumbing fixture technologies and increased
more...
Use of Wood in Buildings and Bridges
Overview Prior to the 20th century, wood was the major structural material for most houses and commercial buildings. Today, many houses and light commercial buildings are constructed using modern wood structural materials, such as roof and floor trusses, plywood and OSB. Also, an increased interest exists for using wood for transportation structures, including bridges. This course is intended
more...
The Last Straw Water Use by Power Plants in the Arid West
Overview Power plants consume a large chunk of the available water supply in the arid Western United States. While the consumption is small relative to agricultural users, power plants can have a significant impact on available source water in localized areas where drought conditions exist. This course examines the uses of water in power plants and the water use conflicts that can arise when
more...
Lumber Stress Grades and Design Properties
Overview Lumber sawn from a log, regardless of species and size, is quite variable in mechanical properties. Pieces of lumber sawn from the same log may differ in strength by several hundred percent. For ease of use, lumber with the same mechanical properties are placed in categories, commonly known as stress grades. This course is intended to provide the student with an understanding of how
more...
Stairways and Ladders - A Guide to OSHA Rules
Overview Working on and around stairways and ladders is hazardous. Stairways and ladders are major sources of injuries and fatalities among construction workers and many of the injuries are serious enough to require time off the job. OSHA rules apply to all stairways and ladders used in construction, alteration, repair, painting, decorating and demolition of worksites covered by OSHA's
more...
Placement of Concrete in Cold Weather
Overview This course discusses considerations when placing concrete in cold weather. The placement of durable, quality concrete is a task that requires experience and a commitment to quality. Cold ambient temperatures decrease concrete's rate of settling. Additionally, placement of concrete in cold temperatures increase the likelihood of a deficient product, unless steps are taken to
more...
Durability of Geosynthetics for Highway Applications
Various aspects of geosynthetic durability are addressed in this (one-hour) course in order to develop procedures that could be used to predict long-term strength losses of geosynthetics used in highway applications. This information is essential to designers for allowing tensile capacity for geosynthetics used primarily in mechanically stabilized earth (MSE) retaining walls, reinforced soil
more...
Earthquake Design of Equipment and Supports Response Spectrum Method
This course presents the response spectrum method of earthquake response analysis/design of mechanical and electrical equipment and supports. Equipment and supports are modeled as a single-degree-of-freedom (SDOF) system. No prior knowledge of structural vibration analysis or earthquake analysis is required to understand this course. The student must take a multiple-choice quiz consisting of ten
more...
Design and Selection of Small Wastewater Systems
Overview In this course the student will review EM 1110-2-501, "Design, Construction and Operation of Small Wastewater Systems" published by the U.S. Army Corps of Engineers. This course is particularly relevant to engineers involved in the design, construction and operation of small wastewater systems, as well as engineers interested in gaining a fundamental understanding of the
more...
Design of Buildings in High Wind Coastal Areas
This course will review the design process required for residential buildings (one to three-story) to withstand hurricanes and other severe natural hazard events. The required calculations for all of the site specific design loads (forces) which will be applied to the structure is not within the scope of this course, however these site specific forces, which have been previously calculated in a
more...
Excavation Hazards
Overview Excavation and trenching are among the most hazardous construction operations. Workers involved in excavating and trenching operations are exposed to many different potential hazards, including cave-ins, hazardous atmospheres and falling objects. However, most injuries and deaths associated with excavation and trenching operations can be prevented by employing OSHA safety standards.
more...
Design of Small Water Systems - Pumping Storage and Distribution
Small water systems have unique design considerations relative to larger municipal water systems. The small number of users makes the system more sensitive to peak rates demanded by one or several users. Given this fact, it is particularly important that the system designer consider all components of the system simultaneously. In this course the student will review Chapter 7, "Pumping,
more...
Design of Small Water Systems - Water Quality Requirements
The National Safe Drinking Water Act (SDWA) specifies maximum permissible levels of contamination and minimum monitoring frequencies for public water systems. Mandatory adherence to the specified maximum contaminant level (MCL) is dependent on whether the water system serves a community (year-round residents) or a transient population (such as parks, campgrounds and restaurants). The MCLs are
more...
Design of Small Water Systems - Water Quantity Requirements
Local water shortages are a recurring problem in many parts of the U.S. and throughout the world. As the population continues to grow, the problems will only increase. Thus, it is important to properly plan water use projects to ensure that the system is capable of meeting the users' demands for many years to come. In this course the student will review Chapter 4, "Water Quantity
more...
Retaining Walls for Non-Geotechnical Engineers
Overview This course is intended for a wide range audience and in particular, the non-geotechnical engineer and is not intended as an exhaustive review of the subject. The objective of the course is to discuss the method of calculating the active earth pressure using the Rankine and Coulomb methods. The course also outlines the method used to calculate the factors of safety for sliding,
more...
Concrete Distress Deterioration - Symptoms and Causes
Overview A basic understanding of the underlying causes of concrete deficiencies is essential to performing meaningful evaluations which lead to the proper selection of the method or technique used to successfully repair concrete. Symptoms or observations of a deficiency must be differentiated from the actual cause of the deficiency, and it is imperative that causes and not symptoms be
more...
Pretreatment of Industrial Wastewater for VOC Hydrocarbon Removal
Overview This course is intended for a wide range audience of engineers and in particular engineers dealing with plant water effluent streams directed to sanitary sewer facilities. Pretreatment of industrial wastewater to remove hydrocarbons is often required so that the hydrocarbons will not cause VOC emissions from sanitary sewer plants which exceed regulatory limits. In this course you will
more...
Potable Water - Disinfection
Overview Disinfection is used to kill or inactivate disease-causing organisms in a potable water supply. The EPA Surface Water Treatment Rule (SWTR) requires systems using public water supplies from either surface water or groundwater under the direct influence of surface water to disinfect the water. There are a number of different disinfection options available to the design engineer. The
more...
Potable Water - Filtration
Overview For as long as humans have walked the earth, they have quested for pure drinking water. Sanskrit writings dating back to 2000 B.C. describe how to purify water by boiling it over a fire or filtering it through sand and gravel. The first municipal water plant was installed in Scotland in 1804. Slow sand filtration was first used for municipal water plants in the U.S. in 1872. There
more...
Soil Properties and Other Strange Things for Non-Geotechnical Engineers
Overview This course is intended for a wide range audience and in particular, the non-geotechnical engineer and is not intended as an exhaustive review of the subject. The objective of the course is to discuss some common properties of soil and explain some seemingly strange quirks. When this course has been completed, the reader will have an appreciation for geotechnical engineering and be
more...
Superpave Mixture Design
Overview Superpave has become the hot-mix asphalt mixture design method of choice of most state highway agencies across the United States. Early performance tests showed very rapid rutting failures. In order to determine the causes of the rapid rutting failures, a team of academicians, asphalt industry experts, and state highway officials was established to study the early failures and to
more...
The Physics of Mold
Overview This course is intended for architects, environmental engineers and anyone else interested in knowing about the process of mold development in buildings. The objective of the course is to outline the evaluation method for designing and building composite walls in different climatic zones and to give a tool for the designers to avoid mold development. Case studies highlight the pitfalls
more...
Rigid Pavements Spall and Crack Repair Using Epoxy Resin Products
Overview Rigid pavement is a part of life for society. Its uses for both vehicular and aircraft traffic have provided significant impacts to the growth of our society. No matter how well the installation was accomplished, over time it will deteriorate due to the traffic and weather. Some of the common deteriorations are cracking and spalling. Given the heavy volume of use of pavements, rapid
more...
UV or Dechlorination of Wastewater - Eliminating Residual Chlorine Concerns
Overview Chlorination has been widely used as a germicidal agent in the final treatment of wastewater since the passage of the 1972 Federal Water Pollution Act-FWPA. Recent changes in regulations are mandating reduced chlorine levels in wastewater outflows since studies have indicated that chlorine can be toxic to aquatic life and harmful to the shellfish industry. This course will introduce
more...
Physical Properties and Moisture Relations of Wood
Overview A basic understanding of the physical properties of wood is desirable since these properties affect a wide variety of products that are manufactured from wood. There are many different physical characteristics or properties among the many different species of wood. In many cases, more than one property of wood is important to the end product. This course is intended to provide the
more...
Disinfection Methods for CSO Treatment
Overview Combined sewer overflows (CSOs) occur when flows exceed the hydraulic capacity of either the wastewater treatment plant (WWTP) or the collection system that transports the combined flow of storm water and sanitary sewage to the WWTP. When an overflow occurs, the excess flows tend to be discharged into a receiving body of water. CSOs typically discharge a variable mixture of raw sewage,
more...
Monitoring Groundwater Conditions
This course addresses the many applications and techniques for sampling and analyzing groundwater. Regulatory requirements stipulate the minimum water quality of groundwater sources. Monitoring wells are used to obtain samples of subsurface groundwater for analysis. But, how do you construct a monitoring well? And what types of measurements should be taken to ensure regulatory compliance? In
more...
Measurement and Control of pH in Wastewater Effluent
In many areas of the country pH limits have been established for the acceptance of treated wastewater effluent into public water systems. This course covers pH characteristics, measurement, control applications and various treatment processes as they apply to industrial wastewater. The student must take a multiple-choice quiz consisting of sixteen (16) questions at the end of this course to
more...
Culvert Design
This course presents terms related to culvert design. Based on certain design conditions, we will design a couple of culverts. We will design a circular concrete pipe culvert and a concrete box culvert. We will use nomographs for the design. We will also design rip rap for erosion control. The student must take a multiple choice quiz consisting of ten questions at the end of the course to earn
more...
Steel Beam Design
This course covers the design of steel beams based on the AISC Steel Construction Manual, 13th edition. No prior knowledge of previous codes is necessary. This course would be of particular interest to Civil and Structural Engineers. The author attended a steel seminar on this new manual when it first came out and there were about 200 people in attendance. Only about 5 were using this new manual.
more...
Steel Column Design by ASD LRFD Steel Construction Manual
This course covers the design of steel columns based on the AISC Steel Construction Manual, 13th edition. No prior knowledge of previous codes is necessary. This course would be of particular interest to Civil and Structural Engineers. This course will show how to design axially loaded W sections by trial-and-error using section E3 of the specification. It will show how to design columns using
more...
Steel Tension Member Design by ASD LRFD Steel Construction Manual
This course covers the design of steel tension members based on the AISC Steel Construction Manual, 13th edition. No prior knowledge of previous codes is necessary. This course should be of particular interest to Civil and Structural Engineers. This course will show how to design tension members based on some of the limit states in sections D and J of the specification. In section D, we look at
more...
Beam Bearing Plates and Column Base Plates
This course covers the design of column base plates and beam bearing plates based on the AISC Steel Construction Manual, 13th edition. No prior knowledge of previous codes is necessary. This course should be of particular interest to Civil and Structural Engineers. The course will show how to design a column base plate based on its strength limit state found in section J8 of the specification.
more...
Overview of Wastewater Treatment
This course covers basic concepts of Wastewater Treatment including the historical background, The Clean Water Act, the need for and goals of wastewater collection and treatment, types of wastewater treatment systems, unit processes, and definitions of terms used in the industry. This course is intended to be a basic course for civil and environmental engineers to facilitate further study. This
more...
Using Excel for Soil Testing
This course covers many soils tests that can be done in Excel. Liquid Limit Plastic Limit Sieve Analysis Specific Gravity Proctor Each test includes a description of the equipment used, the procedure used along with how the calculations and graphs look in Excel. Many engineers used to use a slide rule to calculate and graph paper to plot up the results. Excel can be used to do the
more...
Design of Reinforced Concrete Beams per ACI 318-05
This course is of particular interest of anybody involved with concrete structures like Civil or Structural Engineers. Very little knowledge of previous ACI codes is needed. This course covers the design of rectangular singularly reinforced concrete beams. There will be many references to ACI 318-05 but you do not need a copy of the code. Several design aids are included in the course. Three
more...
Safe Steps From Sloping Sidewalks
According to Architectural Graphic Standards, Tenth Edition, stairways ? ...are the site of accidents resulting in approximately 4,000 deaths and one million injuries requiring hospital treatment annually in the United States.? No wonder, then, that several mathematical formulas have been developed to help minimize stairway tripping hazards. Most notably, these formulas regulate the ratio of the
more...
Optimum Design of Indeterminate Beams
Overview The design and analysis of indeterminate frames and beams are important problems encountered by all structural engineers. With modern computer programs, analysis is not a difficult problem. Design is more complex and less amenable to programming. For efficient design, something between the following two extremes is needed: (1) The first intuitive approximation of the structural design
more...
Bearing Capacity of Shallow Footings for Non-Geotechnical Engineers
Overview This course is intended for a wide range audience and in particular, the non-geotechnical engineer. The objective of the course is to discuss the bearing capacity of shallow spread footings and illustrate how this value is derived. In this course, you will learn that the allowable bearing capacity of the soil is not only dependent upon the ability of the soil to carry the load, but
more...
Design of Monorail Systems
Overview This course provides guidance for the design of a monorail beam system. The design concept presented is for a manually-driven trolley hoist on a single beam or girder based primarily on the Crane Manufacturers Association of America (CMAA) Specification No. 74. Deflection limitations, fatigue, and operational safety will also be discussed. Two case studies are presented to show the
more...
Small Water Systems - Water Treatment
Overview The purpose of water treatment is to do whatever is necessary to render a raw water suitable for its intended use. Depending on the quality of the water source and the intended use, treatment may range from simple disinfection with chlorine to more expensive, specialized processes such as reverse osmosis or ion exchange treatment. This course examines the more common water treatment
more...
Indoor Air Quality
Overview In modern life, people spend more and more of their time indoors - home, office, cars, and airplanes. A lot of us even exercise indoors. Unfortunately, we've rarely thought about indoor air quality (IAQ) and its health effects, until recently. Sick Building Syndrome and Building Related Illness are related to poor indoor air quality and other indoor environmental factors. More and
more...
Structural Design Criteria for Southern Pine Lumber
Overview Southern Pine, also known as Southern Yellow Pine, is widely available and is highly desirable for design not only because of its inherent high strength and durability but also for its treatability and beauty. The design values of Southern Pile are among the highest of all softwood species. Southern Pine's durability makes its use suitable for flooring, decks, boardwalks, and other
more...
Texas ASCE Guidelines for the Evaluation and Repair of Residential Foundations
Overview The Texas Board of Professional Engineers (TBPE) rescinded Policy Advisory 09-98-A, Regarding Design, Evaluation and Repair of Residential Foundations. The TBPE now references The Texas Section of the American Society of Civil Engineers and its two documents, Guidelines for the Evaluation and Repair of Residential Foundations, and Recommended Practice for the Design of Residential
more...
Earthquakes and Tsunamis Fundamental Concepts
Overview This course introduces you to the fundamental concepts about earthquakes. Following a brief narrative of the myths and mystery that surrounded the occurrence of earthquakes throughout history, the course describes the precise effects of the first major earthquake recorded in the mid-eighteenth century. This initial advance led to the development of the new discipline of seismology in
more...
Roadway Shoulder Rumble Strips Practices and Policies
Overview The use of shoulder rumble strips (SRS) have been attributed to lower run-off-road crashes due to fatigue and driving under the influence of alcohol or drugs. This course will cover the practices of SRS and how its practice alerts the driver to steer the vehicle off of the shoulder. The League of American Bicyclists (LAB) has expressed concerns about their safety with the use of
more...
Design for the Recycling of Pavements
Overview The use of recycled materials in pavement applications is on the rise. Factors contributing to the increased usage include the reduction of wear and tear on equipment required to haul new materials long distances; development and improvement of the technology and equipment used in the recycling process; and elimination of environmental impacts related to disposing of debris. This
more...
State-of-the-Art Water Use Efficiency
Overview It's no secret that the Southwestern part of the U.S. is one of the driest regions in the country. Given that water is so precious and scarce in the Southwestern U.S., it is particularly important for municipalities in the Southwest to encourage water use efficiency - both on the supply-side and the demand-side. This course covers water use efficiency measures in the Southwestern
more...
Fall Protection in Construction
Overview Falls have become the leading cause of worker fatalities in the US construction industry. Workers involved in working at heights are exposed to potential fall hazards. OSHA recognizes that accidents involving falls are generally complex events frequently involving a variety of factors. However, most injuries and deaths associated with working at heights can be prevented by employing
more...
Prevention of Shoreline Erosion - Coastal Defense Schemes
Overview This course was specifically designed to introduce the basic design concepts behind various coastal erosion defense schemes. Coastal structures are used in coastal defense schemes with the objective of preventing shoreline erosion and flooding of the adjacent coastal areas. Other objectives include sheltering of harbor basins and harbor entrances against waves, stabilization of
more...
Decommissioning of Nuclear Facilities
Overview Compared to sewage waste that can be treated in the local wastewater treatment plant, or placed in landfills, radioactive waste is an entirely different subject. Radioactive waste can be very dangerous when exposed to humans. Because its such a hazardous material, nuclear facilities that use radioactive waste should follow several protocols when being decommissioned. This course covers
more...
Taking Toxics Out of the Air
Overview Air toxics are those air pollutants that are know or suspected to cause cancer or other serious health problems. Each year, millions of tons of air toxics are released into the air. The Clean Air Act has provided the primary framework for protecting people and the environment from the harmful effects of air pollution. In this course the student will learn about what air toxics are,
more...
Solid Waste Management and Waste Reduction Techniques
Overview The United States disposes of over 236 million tons of solid waste a year, a figure that has been steadily increasing for over 100 years. The traditional waste management bureaucracy is dominated by engineers. Engineers have been successful at designing more efficient and safer disposal methods, but they have been reluctant to effect strategic planning initiatives that address the
more...
Reducing Lead Hazards During Construction
Overview Employers must be aware of workplace hazards facing their workers and must take appropriate action to minimize or eliminate exposure to these hazards. The interim OSHA standard aims to reduce the exposure to lead for construction workers. The most significant way to achieve this was by lowering the permissible exposure limit (PEL) of lead from 200 micrograms per cubic meter of air as
more...
History of Coastal Engineering
Overview The history of coastal engineering reaches back over five thousand years to the ancient world bordering the Mediterranean Sea, the Red Sea, and the Persian Gulf. Coastal engineering, as it relates to harbors, started with the development of maritime traffic, perhaps before 3500 B.C. Recently, archaeologists, using modern survey techniques, excavations, and old documents, have revealed
more...
