Online Be Found eLearning

Hazards of Asbestos in the Workplace ...insulating pipes and boilers. However, asbestos can still be found in many older buildings. Those who work in construction, repair, demolition and renovations are at a greater risk of contracting asbestos-related diseases such as asbestosis, lung cancer, and mesothelioma. There is no safe level for exposure to asbestos. This course introduces the students to the hazards of asbestos in the  more...

Ionizing and Non-ionizing Radiation Safety Personnel working in areas where they could be exposed to radiation need to be aware of the associated hazards and preventive or control measures. This course covers information about radiation, kinds of radiation found in workplaces, effects of radiation on human health, and the preventive measures that could be adopted to control radiation in the work areas. This course will be helpful for those  more...

Project Management and Six Simga Training Programs- Prep for PMP Certification ...s results. Project management standards and practices can be found in all industries (i. e. construction, manufacturing, aerospace, and telecommunications) and all disciplines (i. e. engineering, information technology, human resources, and product development) worldwide. As the interest and demand for project management standardization increases, so does the demand for highly qualified project  more...

Advanced Oil Gas Drilling and Completion Technologies -Horizontal Directional Drilling Advanced Oil & Gas Drilling and Completion Technologies Training Course is an online training course offered through B. F. Environmental Consultants Inc. The course outlines the current best practices and modern technology has allowed for more efficiency in the search and drilling for oil and gas. Today, more resources are found using fewer wells and at the same time are drilled deeper and  more...

Using and Developing JavaBeans This four-day course runs from an introduction to the JavaBeans architecture through in-depth coverage of implementation techniques and issues. The course taken as a whole is intended to give the student with no prior JavaBeans experience (but a good working knowledge of the Java language) a firm understanding of the component model, of how to use it in application development by using  more...

Java Development for Secure Systems Rev 5 0 This course exposes students to the broad range of challenges and techniques that is "Java security." As there is not one security problem for Java applications and components, but many, so there are many diverse solutions, found in various places in the Java architecture. This course starts with basic concepts of code security -- access controllers, permissions, and policies -- and good  more...

Upper Layer Protocols This WestNet e-Learning module briefly highlights some common processes found above the Transport Layer in the protocol suites.  more...

Overview of Layers and Layer 1 Devices In this WestNet e-Learning module, we review the layers of the Open Systems Interconnection (OSI) reference model, functions of each layer, and internetworking devices that perform each of the functions. We will begin a detailed discussion of the devices found at the Physical Layer of the OSI model.  more...

Understanding Your Customer Can you imagine trying to sell a product or service to a customer you know nothing about? You probably wouldn't succeed. The better you know your customer, the higher your chance for success. In this course, you'll learn about the first major component of the strategic account sales (SAS) approach: research. You'll start by learning about the key areas to research using the SAS approach and where  more...

Understanding Your Target Customer s Business Imagine trying to sell a product or service to a customer that you know nothing about. Do you think it would be an easy process? Probably not. The better you know your customer, the better your chances for success. In this course, you'll learn about the first major component of the territorial account sales (TAS) approach--research. You'll gain an understanding of the benefits of good research and  more...

Managing the Execution and Control of IT Projects Did you know that the average IT project has cost overruns of nearly 200 percent, and that almost 30 percent of all IT projects fail? Why do you think IT projects are so vulnerable to cost overruns and failure? How can you ensure that your project does not end up as one of these statistics? You can avoid being a statistic by managing project scope, cost, and scheduling. As you go through this  more...

Improving Your Cross-cultural Communications Picture the scene. You've been asked to contact some new clients based over 3,000 miles away. You've never spoken with them before and you're not sure what response you'll get. This is a familiar situation that is played out daily in many organizations around the world. How many times have you found yourself in this situation? Thankfully, there are things you can do to improve your cross-cultural  more...

Dynamics of Leadership ...egardless of company status, be a leader? Yes Leaders can be found at all levels in the work force. When you're learning how to lead, is it possible also to be responsible for discovering new future leaders? You bet it is. Even though you aren't in management, do you have the power to influence someone to change his behavior? Again, the answer is yes. In this course, you'll learn how to become  more...

Lean Value Finding methods to capture customer-driven value is not a new activity. You've probably analyzed processes, conducting customer surveys, and used audits to determine what customers want. Yet, according to lean thinkers these techniques don't go far enough. They still departmentalize the value concept. Lean experts propose a more holistic view of value that stretches beyond organizational  more...

Usability Engineering This WestNet e-Learning module presents the concept of usability engineering and also explores the various forms of testing and measurement, measurement devices, and methodology.  more...

Equal Employment Opportunity EEO Think about the last time you were in an interview. Did you pay attention to the types of questions being asked? If not, you may have offered or requested information prohibited under anti-discrimination laws. It is essential to know the types of questions that can, and cannot, be asked in order to avoid charges of unfair discrimination. In this course, you will learn the Equal Employment  more...

UNIX System Administration This course presents the basics of administering a UNIX operating system. It includes instruction on adding and removing users, backing up the file system, managing the file system, and manipulating the run-time environment. The course introduces the concept of system administration. It describes the duties of the system administrator, introduces the superuser and discusses how an administrator  more...

Working with UNIX Files and Directories To demonstrate common UNIX commands and programs used to perform basic tasks involving files and directories End users and IT professionals working in a UNIX environment for the first time  more...

Text Editing and Printing in UNIX To describe how to use the vi text editor and how to print documents End users and IT professionals working in a UNIX environment for the first time  more...

The 802 11 Network Architecture This module covers some of the key concepts found in the 802.11 network architecture. You will read about the process by which clients connect to an access point, the terms used for organizing wireless LANs, and how power management is accomplished in wireless LAN client devices. Without a solid understanding of the principals covered in this module, it would be quite difficult to design,  more...

TCP IP Addressing and Subnetting This WestNet e-Learning module introduces subnetting concepts, beginning with Class C networks, and building to subnetted Class A networks. We will also discuss Classless Interdomain Routing (CIDR) and supernetting.  more...

TCP IP Structuring and Addressing This WestNet e-Learning module introduces the TCP/IP protocol suite: the OSI model, the TCP/IP Network, Transport, and Application Layer protocols. We will also review some of the most common network devices responsible for moving data across networks.  more...

Network Layer Protocols This WestNet e-Learning module reviews some of the more common Network Layer protocols.  more...

Transport Layer Protocols In this WestNet e-Learning module, we will explore Transport Layer protocols. These protocols are responsible for getting messages across a network using the services of the Network Layer.  more...

Convergence of Communications This WestNet e-Learning module discusses how wide area network (WAN) technologies support and help implement converged communications, voice, video, and data all transported over the same physical network topologies. We will also investigate components key to integrating puclic swiched telephone network (PSTN) and data communications.  more...

Gathering Requirements This module outlines a formal five-phase approach to network design. . It can be used by an outside consultant or an internal Information Services (IS) group. This network design process, as presented here, is very methodical. This level of detail helps ensure that the designer gathers all necessary information, considers all options, and keeps all key players well informed. Experienced network  more...

LAN Software In this WestNet e-Learning module, you will be guided through a brief description of the most important NOS solutions. We will examine how NOSs compare to the Open Systems Interconnection (OSI) model, and we will look at the key elements of each major NOS vendor's products.  more...

Review of LAN This WestNet e-Learning module reviews the most important networking principles that were covered in the "long" WestNet Learning course, Introduction to Networking.  more...

Workplace Safety Orientation This one-hour course will provide an awareness level orientation of basic industrial safety fundamentals. It was designed to provide an overview of some of the basic concepts and techniques used in modern industry to protect workers. It also describes the purpose of the following safety programs: Hazard Communication; Bloodborne Pathogen Safety; Lockout/Tagout; Confined Space Entry; Emergency  more...

Workplace Hazardous Materials Information System The Hazardous Products Act and its regulations are administered by the Government of Canada Department of Health, commonly referred to as Health Canada. Supplier labelling and MSDS requirements are set out under the Hazardous Products Act and associated Controlled Products Regulations. This one-hour course covers information required through coordinated federal, provincial and territorial  more...

DOT 1 Hazardous Materials Table This training course will introduce the requirements of the Department of Transportation's Hazardous Materials Regulations, including definitions, an introduction to the nine Hazard Classes, and the HAZMAT Table. The proper identification, preparation, and transportation of hazardous materials impact everyone's safety. This training course may be used to meet the requirements for general  more...

DOT 2 Packaging and Labeling This training course will introduce the requirements of the Department of Transportation's Hazardous Materials Regulations, including packaging, labeling, marking, and placarding. The proper identification, preparation and transportation of hazardous materials impacts everyone's safety. This training course may be used to meet the requirements for general awareness/familiarization training.  more...

DOT 3 Shipping Papers This half-hour training course will introduce the requirements of the Department of Transportation's Hazardous Materials Regulations, including the components of the basic description of hazardous material, general information required on the shipping paper, use of the HAZMAT Precedence Table, and general emergency response information. The proper identification, preparation, and transportation  more...

IATA 1 Hazard Class Identification Classification This training course will introduce the requirements of the International Air Transport Association's Hazardous Materials Regulations, including definitions, an introduction to the Hazard Classes, and the List of Dangerous Goods. The proper identification, preparation, and transportation of hazardous materials affect everyone's safety. This training course may be used to meet the requirements  more...

IATA 3 Packaging This training course will introduce the packaging requirements of the International Air Transport Association's Hazardous Materials Regulations. This training course may be used to meet the requirements for general awareness/familiarization training. Your employer will provide additional function-specific training. The content in this course is designed to comply with the intent of the  more...

IATA 4 Documentation This training course will introduce the requirements of the International Air Transport Association's Hazardous Materials Regulations, including required documentation to transport dangerous goods (Shipper's Declaration for Dangerous Goods and Air Waybill). This training course may be used to meet the requirements for general awareness/familiarization training. Your employer will provide  more...

Construction Safety Orientation This course is designed to inform new construction workers and site visitors in and around construction sites of the potential hazards and safe work practices associated with the construction industry. The content in this course is designed to comply with the intent of the applicable regulatory requirements. recognize hazards commonly found at construction sites recall safe construction work  more...

Electrical Safety Awareness An awareness level course that discusses how to work safely with electricity. It focuses on specific electrical hazards found in the workplace and methods to minimize or eliminate those hazards. The content in this course is designed to comply with the intent of the applicable regulatory requirements. recall basic rules of electricity as they relate to electrical safety identify actions to  more...

Hazard Communication This one-hour course will acquaint you with the precautions that both you and your employer must take in order to safely use, handle, and dispose of hazardous chemicals in the workplace. The content in this course is designed to comply with the intent of the applicable regulatory requirements. identify the routes of chemical entry into the body define various categories of chemical hazards  more...

Material Safety Data Sheets This course is designed to provide both workers and supervisors with a better understanding of how to interpret a Material Safety Data Sheet (MSDS), as well as address specific requirements associated with MSDS's in the workplace. The content in this course is designed to comply with the intent of the applicable regulatory requirements. recognize the physical states in which chemicals are  more...

Non-Ionizing Radiation Safety This course is designed to familiarize learners with the health implications associated with non-ionizing radiation, specifically radio frequency (RF) radiation and measures to protect workers from exposure. Employees who may be exposed to radio frequency (RF) radiation  more...

DC Circuit Theory This one-hour course is designed to provide you with a basic understanding of DC Electrical Theory. It is also intended to enhance your understanding of the operation and design of DC circuits, components, and sources. You will learn about basic DC electrical terms, equations and theory, and solve problems involving resistance, voltage, and current. The content in this course is designed to  more...

Spill Prevention Control and Countermeasure Plan When petroleum products are accidentally spilled, they may damage the environment and pollute our waterways. A spill of only one gallon of oil can contaminate a million gallons of water. This 30-minute course will provide you with information on the prevention and countermeasures you should take should a spill occur. This training will also provide information on the components of a Spill  more...

Growing with Technology - Level 4 This course will introduce the learner to the computer and its history. It will familiarize the learner with typing and drawing skills. It will also give the learner knowledge about using databases, spreadsheets, word processors, presentations, and Internet browsers. Grade 4 children aged 9 years will use this course.  more...

Growing with Technology - Level 5 Growing with Technology ? Level 5 covers the concepts related to the computer and its history. The course uses graphics and animations to effectively teach the learner the concepts related to typing and drawing. It also provides the learner the opportunity to use word processors, databases, spreadsheets, presentations, and Internet browsers. This series is intended for children in kindergarten to  more...

Growing with Technology - Level 3 This course will introduce the learner to the computer and its history. It will familiarize the learner with typing and drawing skills. It will also give the learner knowledge about using databases, spreadsheets, word processors, and Internet browsers. The learner will also learn about presentations. Children in 3rd grade (aged 8 years) will use this course.  more...

Growing with Technology - Level 2 This course introduces children to technology through engaging graphics and animations. This course will introduce the learner to the computer and its history. It will familiarize the learner with typing and drawing. It will also give the learner the opportunity to use word processors, databases, spreadsheets, presentations, and Internet browsers. Grade 2 children (8 years old).  more...

Growing with Technology - Level 1 This course introduces children to technology through engaging graphics and animations. This course will introduce the learner to the computer and its history. It will familiarize the learner with basic typing and drawing. It will also give the learner basic knowledge about using word processors, databases, spreadsheets, presentations, and Internet browsers. Grade 1 children (7 years old).  more...

Growing with Technology - Level K This course will introduce the learner to the computer and its history. It will familiarize the learner with basic typing and drawing. It will also give the learner basic knowledge about using databases, spreadsheets, word processors, and Internet browsers. Kindergarten children aged 6 years will use this course.  more...

Store Digital Video The Store Digital Video course will provide users with information on how to store and archive their raw digital video files, backup any movies they create, and discuss file formats most commonly found on the Internet. This will include how to understand storage needs, and tips for managing and storing. The course will also review managing files using Windows XP and an overview of the  more...

KAZ (Keyboard AZ) Typing Tutor KAZ (short for Keyboarding A-Z) was created by a UK team of typing teachers and computer experts to make it possible for anyone to learn to touch type the A-Z keys in an average of just 90 minutes. Learning times vary as the course is designed to allow learners to work at their own pace. The KAZ accelerated touch-typing learning method is based on 11 words in just 5 phrases. The KAZ approach to  more...

Project Management - Project Communications Management In Project Management - Project Communications Management you will learn how to plan project communications taking into account the various communication flows found in project environments and the influence that personal perceptions have on communication. You will also learn about the importance of distributing information to project stakeholders as well as how to report project performance by  more...

Introduction to Networking This module begins with an overview of computing that includes topics such as PC components measurement terms and the decimal binary and hexadecimal number conversion processes. Lesson 2 covers network fundamentals discussing important terminology used throughout the text and in the field. The highlight of this lesson is the Open Systems Interconnect (OSI) model. Lesson 3 discusses network  more...

WAN Technologies This module reviews WAN technologies commonly found in small to medium-size networks. Lesson 1 discusses common telecommunications and WAN terminology. Lesson 2 identifies the characteristics of High-Level Data Link Control Protocol (HDLC) Point-to-Point Protocol (PPP) Integrated Services Digital Network (ISDN) frame relay xDSL Asynchronous Transfer Mode (ATM) and SONET. Lesson 3 discussed modem  more...

Configuring and Operating Cisco IOS Devices This module gives students a chance to work with Cisco equipment and the command line interface. Lesson 1 opens with the features from the Internetwork Operating System (IOS) found on most Cisco switch and router devices. It also discusses the general bootup process connecting to a device and gaining access to the command line through user EXEC and then privileged EXEC modes. The information in  more...

IP Routing This module addresses the routing process types of routing classification specific IP routing protocols variable length subnet masks and route summarization (aggregation). Lesson 1 discusses the routing process along with static default and dynamic routes. The categories of dynamic routing protocols which include both link state and distance vector are reviewed in Lesson 2. Lesson 3 discusses the  more...

Interconnecting Cisco Network Devices (ICND 2.1) Interconnecting Cisco Network Devices (ICND) focuses on using Cisco Catalyst switches and Cisco routers connected in local-area networks (LANs) and wide-area networks (WANs) typically found at small to medium network sites. Upon completion of this course, students will be able to select, connect, configure, and troubleshoot the various Cisco networking devices. This course will prepare students to  more...

Managing Generations in the Workplace: Understanding the Generations Managing Generations in the Workplace: Understanding the Generations introduces the learner to the four generations found in the workplace today. It then characterizes each generation accounting for their influences their value systems their performance in the workplace and their generational personalities.  more...

Certified Software Tester Due to the in creasing complexity of modern software development projects it is essential that QA/ Testers are certified. Whereas, many employees are shifted into QA positions from programming or other areas in development or just a change of work duties. We have found that in a number of cases there has been a vague understanding of the QA/ Testing Process, and often a lack of the SDLC  more...

Certified Software Tester (CST) Self-Study Materials Due to the increasing complexity of modern software development projects it is essential that QA/ Testers are certified. Whereas, many employees are shifted into QA positions from programming or other areas in development or just a change of work duties. We have found that in a number of cases there has been a vague understanding of the QA/ Testing Process, and often a lack of the SDLC  more...

Cross Connection Control Cross-connections are the paths through which it is possible for contaminating materials to enter a potable water supply, there are many ways that cross connections can exist in a water system. This course will help operations staff identify and control cross connection situations. Topics covered during this course include: * how cross connections can exist for years or even decades  more...

Flash 8 Flash is the standard tool for delivering interactivity and animation on Web sites. This series walks you through the new and improved features found in Flash 8. Audience: This series is for anyone who's preparing to upgrade to Macromedia Flash 8. It assumes you have a general knowledge of previous versions of Flash.  more...

Dreamweaver 8 Summary: Dreamweaver is a popular and powerful tool to build rich, professional Web sites and Web applications. These courses introduce the new features found in Dreamweaver 8. Audience: This course is for anyone who wants to learn about the new features found in Dreamweaver 8. The course assumes that you have some familiarity with earlier versions of Dreamweaver.  more...

Introduction to the Spectrum Analyzer This is an introductory course on the spectrum analyzer. This course covers the basic block diagram and some of the basic controls that can be found on spectrum analyzers. It does not cover basic measurements that can be made with the spectrum analyzer, that is being reserved for follow-on courses. The intent of this course is to provide basic familiarity to this versatile tool. The basic block  more...

Fares and Tickets International Prerequisite courses: Air Reservations and Air Fares International air travel has expanded exponentially in the past decade and promises to continue to grow. This course will provide you with the skills required to meet the needs of your international air travelers. These skills include an understanding of the two basic international faring systems, mileage and routing as well as currency  more...