Online Ccnt eLearning Training
From Serebra Learning Corporation
CCNT Basic Telecommunications Part 1: Fundamentals, Analog, and Digital
This is the first course in a two part series that presents the learner with the fundamentals of telecommunications and gives a comprehensive introduction to analog and digital concepts. The course covers the history of telecommunications and looks at the structure of business systems (including station sets, PBX, key and hybrid systems, ISDN and broadband), Consumer Premises Equipment (CPE), and
more...
CCNT Basic Telecommunications Part 2: Networks, Signaling, and Switching
This is the second course in a two-part series on Basic Telecommunications for the Certified in Convergent Network Technologies (CCNT) curriculum. This course focuses on transmission networks, switching, and signaling.
more...
CCNT Basic Data Communications Part 1: Introduction to Data Communications
This is the first course in a three-part series on Basic Data Communications for the Certified in Convergent Network Technologies (CCNT) curriculum. This course will introduce learners to data networks, signals and to data transmission.
more...
CCNT Basic Data Communications Part 2: Networking and Transmission Principles
This is the second course in a three part series that teaches students about networks and transmission principles. The course covers local area networks (LANs), wide-area networks (WANs), hierarchical WANs, and LAN components. System network architecture (SNA), and TCP/IP, data protocols, DTE to DCE interface standards, and transmission methods and error checking are also covered.
more...
CCNT Basic Data Communications Part 3: Equipment and Media
This is the final course in a three-part series on Basic Data Communications for the Certified in Convergent Network Technologies (CCNT) curriculum. This course teaches students about data communications equipment and media. In addition, it covers the Institute for Electrical and Electronic Engineering (IEEE), analog and digital communication, modulation, multiplexers, and the Synchronous Optical
more...
CCNT Local Area Networks Part 1: Introduction to LANs
This is the first course in a three-part series on Local Area Networks for the Certified in Convergent Network Technologies (CCNT) curriculum. This course introduces LAN technologies, topologies, and standards. In addition, the TCP/IP Protocol suite and IEEE standards are covered.
more...
CCNT Local Area Networks Part 2: Data Transmission and Components
This is the second course in a three-part series on Local Area Networks for the Certified in Convergent Network Technologies (CCNT) curriculum. This course covers transmission techniques and media, LAN components, Internetworking components, and access connectivity devices.
more...
CCNT Local Area Networks Part 3: Enterprise Networks
This is the last course in a three part series that teaches Network Management and the tools and protocols associated with that. It also covers advanced network technologies to include circuit switched services and packet switched services.
more...
CCNT Computer-Telephony Integration Essentials
This course introduces Computer-Telephony Integration Essentials (CTI). CTI architecture, hardware, market applications and system development are covered in this course.
more...
CCNT Broadband Technologies Part 1: Fundamentals, SONET, and SDH
This is the first course in a three-part series Broadband Technologies for the Certified in Convergent Network Technologies (CCNT) curriculum. This course introduces broadband technologies and categories, and it teaches multiplexing and switching. It also covers network interconnections and SONET.
more...
CCNT Broadband Technologies Part 2: BISDN, Frame Relay, and SS7
This is the second course in a three-part series on Broadband Technologies for the Certified in Convergent Network Technologies (CCNT) curriculum. This course covers ISDN and BISDN, X.25, Frame Relay, SS7, and Cell Relay.
more...
CCNT Broadband Technologies: SMDS, ATM, Broadband Access, and VP
This course will teach the topics of ATM and SMDS. It also covers DSL and wireless broadband and VPN technology to include VPN security.
more...
CCNT Local Area Networks v6 Part 3
This course teaches Network Management and the tools and protocols associated with that. It also covers advanced network technologies including circuit switched services and packet switched services. A high level of computer skill is not required but learners will probably have had prior experience in the installation, support, and troubleshooting of computer networks.
more...
CCNT Voice Over IP Essentials v6 0
The goal of this course is to present the learner with a comprehensive introduction to Voice over IP (VoIP), its technology, benefits, QoS issues and their solutions, and standards. The first half of the course covers packet voicing basics, Internet technology, and the benefits and applications of VoIP. It then moves on to cover Gateways and their various functions, major issues involved in
more...
CCNT Local Area Networks v6 Part 2
This course covers transmission techniques and media. LAN components and Internetworking components are also taught. This course also covers access connectivity devices. A high level of computer skill is not required but learners will probably have had prior experience in the installation, support, and troubleshooting of computer networks.
more...
CCNT Basic Telecommunications v6 0 Part 2
This course focuses on transmission networks, switching, and signaling. The course begins with an overview of transmission networks, looking at current structures, cellular, Internet, and the various transmission media. It then covers signaling, looking at the various signaling types and processes. The final area of concentration is switching, covering, for example, analog and digital, time- and
more...
CCNT Basic Data Communications v6 0 Part 1
This course gives students an introduction to data networks, signals and to data transmission. The Data Networks and Signals section teaches about data terminal equipment (DTE), data communication equipment (DCE), the OSI model, and analog and digital signals. The Data Transmission section teaches about half-duplex and full-duplex circuits, and switched and non-switched data circuits. This section
more...
CCNT Basic Data Communications v6 0 Part 2
This course teaches students about networks and transmission principles. The networks section teaches about local area networks (LANs), wide-area networks (WANs), hierarchical WANs, and LAN components. This section also teaches about system network architecture (SNA), and TCP/IP. The Transmission Principles section teaches about data protocols, DTE to DCE interface standards, and transmission
more...
CCNT Basic Data Communications v6 0 Part 3
This course teaches students about data communications equipment and media. The LANs and Communications equipment section teaches about the Institute for Electrical and Electronic Engineering (IEEE), analog and digital communication, modulation, multiplexers, and the Synchronous Optical Networks (SONET) protocol. The Transmission Media section teaches about transmission media cables and wireless
more...
CCNT Local Area Networks v6 Part 1
This course introduces LAN technologies and teaches LAN topologies. It also introduces LAN standards and covers the TCP/IP Protocol suite and IEEE standards. A high level of computer skill is not required but learners will probably have had prior experience in the installation, support, and troubleshooting of computer networks.
more...
CCNT Computer-Telephony Integration Essentials v6 0
This course introduces CTI and covers CTI architecture and CTI hardware. It also teaches CTI markets and CTI system development. Candidates work in the data and telecommunications industries and are preparing for the Computer-Telephony Integration Essentials module of the CCNT exam. Typical job roles include telecom and call center managers. Average computer literacy is desirable.
more...
CCNT Broadband Technologies v6 0 Part 1
This course introduces broadband technologies and broadband categories and it teaches multiplexing and switching. It also covers network interconnections and SONET. Candidates work in the data and telecommunications industries and are preparing for the Broadband Technologies module of the CCNT exam. Typical job roles include Telecommunications Technicians, Data/Internet/Telecommunications
more...
CCNT Broadband Technologies v6 0 Part 2
This course covers ISDN and BISDN. X.25 and Frame Relay are also taught. This course also covers SS7 and Cell Relay. Candidates work in the data and telecommunications industries and are preparing for the Broadband Technologies module of the CCNT exam. Typical job roles include Telecommunications Technicians, Data/Internet/Telecommunications Professionals. Average computer literacy is desirable.
more...
CCNT Broadband Technologies v6 0 Part 3
This course teaches ATM and SMDS. It also covers DSL and wireless broadband and VPN technology including VPN security. Candidates work in the data and telecommunications industries and are preparing for the Broadband Technologies module of the CCNT exam. Typical job roles include Telecommunications Technicians, Data/Internet/Telecommunications Professionals. Average computer literacy is desirable.
more...
CCNT Basic Telecommunications v6 0 Part 1
The goal of this course is to present the learner with the fundamentals of telecommunications and to give a comprehensive introduction to analog and digital concepts. The course covers the history of telecommunications and looks at the structure of business systems (including station sets, PBX, key and hybrid systems, ISDN and broadband), CPE, and services (dedicated and switched). The course then
more...
CCNT VoIP Essentials
The goal of this course is to present the learner with a comprehensive introduction to Voice over IP (VoIP), its technology, benefits, QoS issues and their solutions, and standards. The first half of the course covers packet voicing basics, Internet technology, and the benefits and applications of VoIP. It then moves on to cover Gateways and their various functions, major issues involved in
more...
From 123-CBT Computer Based Training
CCNT Basic Telecommunications v6 0 Part 1

... preparing for the Basic Telecommunications module of the CCNT exam and IT professionals. Typical job profiles include: End users, Technical Managers, System Administrators, Network Designers. However, the course is targeted at a very general group.
Deployment:
e-Learning
Language Options:
US English
Total Learning Time:
6 - 8 hours
Objectives:
Unit 1:
more...
CCNT Basic Telecommunications v6 0 Part 2

... preparing for the Basic Telecommunications module of the CCNT exam and IT professionals. Typical job profiles include: End users, Technical Managers, System Administrators, Network Designers. However, the course is targeted at a very general group.
Deployment:
e-Learning
Language Options:
US English
Total Learning Time:
3 hours
Objectives:
Unit 1: Networks and
more...
CCNT Basic Data Communications v6 0 Part 1

This course gives students an introduction to data networks, signals and to data transmission. The Data Networks and Signals section teaches about data terminal equipment (DTE), data communication equipment (DCE), the OSI model, and analog and digital signals. The Data Transmission section teaches about half-duplex and full-duplex circuits, and switched and non-switched data circuits. This section
more...
CCNT Basic Data Communications v6 0 Part 2

This course teaches students about networks and transmission principles. The networks section teaches about local area networks (LANs), wide-area networks (WANs), hierarchical WANs, and LAN components. This section also teaches about system network architecture (SNA), and TCP/IP. The Transmission Principles section teaches about data protocols, DTE to DCE interface standards, and transmission
more...
CCNT Basic Data Communications v6 0 Part 3

This course teaches students about data communications equipment and media. The LANs and Communications equipment section teaches about the Institute for Electrical and Electronic Engineering (IEEE), analog and digital communication, modulation, multiplexers, and the Synchronous Optical Networks (SONET) protocol. The Transmission Media section teaches about transmission media cables and wireless
more...
CCNT Local Area Networks v6 0 Part 1

This course introduces LAN technologies and teaches LAN topologies. It also introduces LAN standards and covers the TCP/IP Protocol suite and IEEE standards.
Learn To:
Identify features of LANs and WANs.
Identify uses of computer networks for individuals and organizations.
Sequence the stages in the evolution of LANs.
Identify features of the Open Systems Interconnection (OSI)
more...
CCNT Local Area Networks v6 0 Part 2

This course covers transmission techniques and media. LAN components and Internetworking components are also taught. This course also covers access connectivity devices.
Learn To:
Identify features of analog signals.
Identify features of digital signals.
Identify features of baseband and broadband transmissions.
Identify features of network components.
Identify features of server
more...
CCNT Local Area Networks v6 0 Part 3

This course teaches Network Management and the tools and protocols associated with that. It also covers advanced network technologies including circuit switched services and packet switched services.
Learn To:
Identify network trends.
Identify characteristics of software management.
Identify characteristics of network management.
Identify capabilities of the T1 technology.
more...
CCNT Broadband Technologies v 6 0 Part 1

...re preparing for the Broadband Technologies module of the CCNT exam. Typical job roles include Telecommunications Technicians, Data/Internet/Telecommunications Professionals. Average computer literacy is desirable.
Deployment:
e-Learning
Language Options:
US English
Total Learning Time:
6 - 8 hours
Objectives:
Unit 1: Broadband Fundamentals (3 - 4 hours)
more...
CCNT Broadband Technologies v6 0 Part 2

...re preparing for the Broadband Technologies module of the CCNT exam. Typical job roles include Telecommunications Technicians, Data/Internet/Telecommunications Professionals. Average computer literacy is desirable.
Deployment:
e-Learning
Language Options:
US English
Total Learning Time:
6 - 8 hours
Objectives:
Unit 1: ISDN and B-ISDN (2 hours)
Identify key
more...
CCNT Broadband Technologies v6 0 Part 3

...re preparing for the Broadband Technologies module of the CCNT exam. Typical job roles include Telecommunications Technicians, Data/Internet/Telecommunications Professionals. Average computer literacy is desirable. .
Deployment:
e-Learning
Language Options:
US English
Total Learning Time:
4 - 6 hours
Objectives:
Unit 1: SMDS and ATM (1 - 2 hours)
Identify
more...
Complete CCNT v6 0 Curriculum

...CCNT v6.0 Curriculum includes the following:
CCNT Basic Telecommunications v6.0: Part 1
CCNT Basic Telecommunications v6.0: Part 2
CCNT Basic Data Communications v6.0: Part 1
CCNT Basic Data Communications v6.0: Part 2
CCNT Basic Data Communications v6.0: Part 3
CCNT Local Area Networks v6.0: Part 1
CCNT Local Area Networks v6.0: Part 2
CCNT Local Area Networks v6.0: Part 3
CCNT
more...
CCNT Computer-Telephony Integration Essentials v6 0

...e Computer-Telephony Integration Essentials module of the CCNT exam. Typical job roles include telecom and call center managers. Average computer literacy is desirable.
Deployment:
e-Learning
Language Options:
US English
Total Learning Time:
3 hours
Objectives:
Unit 1: CTI Overview (1.5 hours)
Identify features of the standard configuration of a
more...
CCNT Voice Over IP Essentials v6 0

The goal of this course is to present the learner with a comprehensive introduction to Voice over IP (VoIP), its technology, benefits, QoS issues and their solutions, and standards. The first half of the course covers packet voicing basics, Internet technology, and the benefits and applications of VoIP. It then moves on to cover Gateways and their various functions, major issues involved in
more...
