Instructor Led Codes Training
Codes Training Provider? - Tell us about your Training!
Please select the location nearest to you:
United States
United Kingdom
India
Egypt
Canada
New Zealand
South Africa
Germany
Malaysia
Singapore
From HAZMAT Plans & Programs, Inc
Safety Manager Training - Denver, CO

...entification, Assessment and Analysis
* How to read the Codes of Federal Regulations (CFR)
* Employer/ Employee Rights and Responsibilities
* Documentation Including the OSHA 300 Form
* Emergency Response Plans
* Hazard Communication Programs
* Hazard Materials Management Plans
* Inspections, Audits and Appraisals
* Corrective Actions
* Training
* Tools for Improvement
more...
Safety Manager Training - Denver, CO
NFPA 70E and Arc Flash Safety, Denver CO



...
- 29 CFR 1910 Subpart S
- NFPA 70E
- National Electric Codes (NEC)
2. Electricity and Worker Safety
- What is an Electrical Hazard?
- Unsafe Conditions vs Unsafe Acts
- Effects of Electrical Shocks/ Arc Flash
3. Energized Equipment
- Qualified Person as Defined by OSHA
- LockOut/ TagOut Procedures (29 CFR 1920. 147)
- Voltage Sensors and Meters
- Grounds and Grounding
4. Safe
more...
Safety Manager Training Course



...Employee Rights and Responsibilities
- How to read the Codes of Federal Regulations (CFR)
- OSHA Recordkeeping Requirements
- Documentation Including the OSHA 300 Form
- Health and Safety Programs
- Hazard Communication Programs (HAZCOM)
- Hazard Materials Management Plans
- Emergency Response Plans
- Inspections, Audits and Appraisals
- Hazard Identification,
more...
From Human Resource & Organisational Development Consultancy (HRODC) Postgraduate Training Institute
Telecommunication Systems


...rs
- Digital Signals
- Adding Meaning to Signals-Codes and Bits
- A Byte = A Character
- Baud Rate Versus Bits per Second-Electrical Signal Rates Versus Amount of Information Sent
- Codes-Adding Meaning to Bits
- Measuring Speed and Capacity
- Broadband Service-Multiple Data Streams
- Improving Utilization-Compression and Multiplexing
-
more...
Telecommunication Systems
SAP and Joint Venture Accounting
...
Day 4 a Project Accounting
Cost Centre, Resource codes set up
Map GL accounts to Cost Centre and Resource Codes
GL accounts to roll up to correct cost headings
Map Cost Centres and or Resource codes to Projects
Be able to identify all Project costs via cost centres or resource codes
Report generation along project lines
Generate Profit and Loss account by Projects
more...
Corporate Governance Principles and Practice


...ith its sector or industry, the requirements to adhere to codes of practice and the a business casea for their adherence to established expectations
- Explain the different statutory agencies to which an organisation is accountable, providing advice regarding how the organisation can benefit from co-operating with them, in relation to their requirement and expectations
- Define
more...
Corporate Governance and Strategic Management


...ith its sector or industry, the requirements to adhere to codes of practice and the a business casea for their adherence to established expectations
- Explain the different statutory agencies to which an organisation is accountable, providing advice regarding how the organisation can benefit from co-operating with them, in relation to their requirement and expectations
- Define
more...
From Lorman Education Services
Building Codes
...code - register now!
Benefits for You
- Convert building codes and theories into solid, workable plans for success
- Make sure you're compliant with each code - learn how they overlap and interact
- Prevent costly building code violations - know what to do and what not to do
- Prosper in spite of stricter codes and ever-changing technology
Learning Objectives
- You will be able to review
more...
Building Codes
Building Codes
...roactive in learning about the latest changes to building codes in British Columbia.
Register today and learn to handle even the most complicated building code issues without hassles. You will walk away with practical how-to's for avoiding code violations. Make sure every project decision you make is up to code - register now!
Benefits for You
- Navigate building codes from a legal
more...
Paralegal Ethics
Ethics for Paralegals - Ethics one of the most important topics in the practice of law!
The use of paralegals has become common in the legal profession; however, most states have no specific regulations with regard to paralegal training or certification, which results in many ethical areas of concern for lawyers as well as paralegals.
Attend this valuable seminar and get up to speed on key
more...
Internet Tax Research
Internet Tax Research - Find out how to be the one your organization relies on. In our fast-paced accounting world, we re often asked to find information about state and federal tax issues sometimes at a moment s notice. Attend this teleconference and get the practical tips you need to be an effective Internet researcher.
Get a firm grasp of how to research legislative history and case law.
more...
From Mullan Training
Introduction To Sage Line 50



...t Design
Financial Year Settings
Currencies
Tax Codes
Departments & Company Preferences
Creating Accounts
Creating Customer Accounts/Opening Balances
Creating Supplier Accounts/Opening Balances
Creating Bank Accounts/Opening Balances
Data Entry Routines
Recording Sales/Purchase invoices/credit notes
Recording Bank Payments/Receipts
Error Correction
more...
Sage Instant/ Sage Job Costing



...ccounts
- Financial Year Settings
- Tax Codes
Creating Accounts
- Creating Customer Accounts/Opening Balances
- Creating Supplier Accounts/Opening Balances
- Creating Bank Accounts/Opening Balances
Data Entry Routines
- Recording Sales/Purchase invoices/credit notes
- Recording Bank Payments/Receipts
Error Correction
- Routine for
more...
From Cympac Software Solutions Pvt. Ltd.
UNIX Training At Cympac Software Solutions





... 4. Default and substitute variables
5. Exit status codes
Exercise: Adding validation to previous scripts
Session 7: LOOP CONSTRUCTS
1. The while loop
2. The until loop
3. The for loop
4. The while true and until false loops
5. Loop control commands
Exercise: Enhancing the previously written scripts
Exercise: Writing a
more...
From The Safety Institute of America
Fire and Life Safety
This fundamental course provides a working knowledge of fire and life safety codes, evacuation management, fire prevention plans, fire brigades, fire extinguishing systems and general fire protection as it relates to OSHA, NFPA and the IFC to assist in the identification of fire and life safety threats throughout the work-place. Taught by certified Fire Marshal and NFPA Certified Fire
more...
From SETTEC
Basic Concepts for the Application of Food Safety Management Systems

Codex Alimentarius Commission, a joint FAO and WHO initiative, stated that "prior to the application of Hazard Analysis and Critical Control Point, HACCP System, to any sector of the food chain, that sector should already be operating according to the codex general principles of food hygiene, the appropriate CODEX codes of practice, and appropriate food safety legislation.
Thus, the objective
more...
From JCS Computer
MAS 90 Training Class
... Logging on Startup Process
Navigating Bank Codes
Printing Reports Adjustment Entry
Library Master Reconciling
File Menu Reports
Business Insights
Additional Utilities
General Ledger Accounts Receivable
Startup Processes Startup Process
Journal Entries Processing Transactions
Budgets Cash Receipts
more...
MAS 200 Training Class
... Logging on Startup Process
Navigating Bank Codes
Printing Reports Adjustment Entry
Library Master Reconciling
File Menu Reports
Business Insights
Additional Utilities
General Ledger Accounts Receivable
Startup Processes Startup Process
Journal Entries Processing Transactions
Budgets Cash Receipts
more...
From kssinfotech
CHIPLEVEL PC MOTHERBOARD & LAPTOPS REPAIR,SERVICE COURSE


...d motherboard
Troubleshooting using Debug card and codes
Laptop Power failure,(laptop not powering on) DEAD
Laptop charging problem,
Laptop No Display problem,
Laptop keyboard failure
Testing and Fault Finding of Laptop Parts
* Screen assembly: Cable, inverter, backlight etc.
* Motherboard: Controllers, chipset, video, BIOS, USB etc.
* Hard Disk - Virus and
more...
CHIPLEVEL LAPTOPSNOTEBOOKPC MOTHERBOARD REPAIR COURSE
PC MOTHERBOARD & LAPTOPS CHIPLEVEL REPAIR COURSE
Introduction to laptops & Motherboard & its make
Sections of laptops, desktop motherboards
IC's Identification , Testing and Replacement DIP, QUAD, PGA, FPGA, FBGA
Tools used for M/ B servicing
(Blower, multimeter, soldering iron, lead sucker, desoldering wire, BGA Machine, SMD Rework Station etc)
Basic Electronics
(Resistors,
more...
LAPTOPS CHIPLEVEL MOTHERBOARD LAPTOPS REPAIR CLASSES
Chip level computer mother baord & Laptops repair course.
This course covers starts from the identification of mother boards,
Troubleshooting various problems related to mother baord like
1. No display
2. No sound
3. Heating of cpu
4. CPU Fan problems
5 Ram related problems
6. Bay or slots problems
7. CHip set problem
8. input out put ic problems]
9. NOrth & south bridge
more...
LAPTOPS & MOTHERBOARD CHIPLEVEL REPAIR CLASSES








...ting, Overheating
Troubleshooting using Debug card and codes
Laptop Power failure, charging, Display, keyboard, Battery Problem, Restarting, Hanging, Overheated etc
You can even take up our training franchisee, we could provide you backup Training as well Technical Support to start up and setup training & Service Centers in your country.
Please feel free to contact for any
more...
From HBF Networks
Administering CallManager and Unity
... CallManager Extension Mobility
8. Client Matter Codes and Forced Authorization Codes
9. Call Display Restrictions
10. Malicious Call Identification
11. Multilevel Precedence and Preemption
6. Using BAT, Remote Monitoring, and Troubleshooting
1. Introducing the Bulk Administration Tool
2. Monitoring the Cisco IP Phone Remotely
3.
more...
ADMINISTRATING CISCO CALLMANAGER

...Mobility, Call Display Restrictions, Forced Authorization Codes (FAC) and Client Matter Codes (CMC), Malicious Call Identification, Multilevel Precedence and Preemption and Cisco IP phone Services. The purpose of each feature is explained and how to configure and use the feature.
Lesson 6: Using BAT, Remote Monitoring and Troubleshooting
Adding, updating, and deleting phones, users, and
more...
From Cosensa Learning & Development Ltd
ISO 14001 - Environmental Management Systems Auditor - IEMA Accredited Course
Course Objectives:
This THREE-DAY course approved by the UK Institute of Environmental Management and Assessment (IEMA) is a recognised qualification for environmental management systems (EMS) auditors demonstrating competence in internal EMS auditing.
This course is suitable for you if you are, or will be, responsible for conducting environmental management system audits against the ISO 14001
more...
OHSAS Lead Auditor Training Course
Course Objectives:
This FIVE-DAY course provides an understanding and knowledge of auditing health and safety management systems to third party standards. You learn to build on the skills of how to plan, structure and conduct an effective audit and to evaluate and communicate the findings. The course is designed to follow the stages in a live audit, including simulated audit interviews and role
more...
NEBOSH National General Certificate
Course Objectives:
NEBOSH (The National Examination Board in Occupational Safety and Health) was formed in 1979 as an independent examining board and awarding body with charitable status. NEBOSH offer a comprehensive range of globally-recognised, vocationally-related qualifications designed to meet the health, safety, environmental and risk management needs of all places of work in both the
more...
From Sun Pirate, Inc
Fundamentals Of Solar Hot Water


This online course concentrates on the basics of installing code compliant solar hot water systems. This course
will be useful for people who currently work in or plan to be employed in the solar hot water industry. Student
technicians will learn practical design criteria, installation guidelines, safety issues, maintenance, and legal considerations
of solar hot water heating systems.
more...
Photovoltaic System Design Installation


This online course will provide the student technician with the fundamental knowledge of photovoltaic system design and installation. This course will be suitable for a supervised, entry level position with a dealer/ installer or other photovoltaic industry company. Student technicians will learn the practical design criteria, installation guidelines,
safety issues, maintenance, and legal
more...
From Global Innovative Campus
Design of Concrete Structures Reinforced with Fibre-Reinforced Polymers FRP
Description
This 2 day-course throws the light on a fairly new type of reinforcing materials, Fibre-Reinforced Polymers (FRP), their composition, production methods, and available products for structural applications. The course discusses the FRP unique properties, behaviour and advantages over traditional reinforcing techniques. Also, case studies and related Canadian codes/ standards for
more...
Structural Design Step by Step Workshop
Description
This course is a practical structural design course that contains step-by-step procedures to help understanding and solving routine structural problems. The course contains a short introduction to the National Building Code of Canada, NBCC 2005, and then goes into details on how to calculate the expected loads on different structures, which include dead, live, snow, wind, seismic and
more...
Piping System Fundamentals - Design Operation and Maintenance
... participant of this seminar will have an overview of the codes and standards governing the design of pressure retaining components and the piping design process. By the end of the seminar, the participant will understand pipe sizing for various flow conditions and pipe wall thickness calculation for internal pressure. Flow and pressure drop calculation; allowable stress and basic piping stress
more...
Solar Photovoltaics Installation
Description
Solar Photovoltaic Installation is an intensive updating skill training course for two days, which introduce the main components of solar photovoltaics system, installation and municipal codes and workplace safety at the entrance level.
more...
Elementary Structural Design Workshop
...design according to the Canadian Standard Association CSA codes S16-01, A23. 3-04, and O86-01, respectively. The course also includes the connection design of steel and wooden members.
Target Audience:
* Structural site Engineers and even design Engineers needing to refresh their design skills according to the new building code and design standards.
* APEGGA examinees for the
more...
From Skills Matter
Simon Browns Software Architecture for Developers
...e and (in his own words) "either a software architect who codes or a software developer who understands architecture" is bringing his ideal course for aspiring software architects to Skills Matter.
This 2-Day exploration will provide you with a real-world and pragmatic understanding of the roles and responsibilities of the modern software architect. Utilising the strong technical knowledge
more...
From Last Minute Training
Efficient Design of Process Piping System 12 CEUs
Participants will have an overview of the codes & standards governing the design of pressure retaining components & the piping design process. Upon completion, they will understand pipe sizing for various flow conditions & pipe wall thickness calculation
more...
From Termark Technical Institute
NICET R Fire Alarm Technician - Level II -Certification Exam Prep Course
This tree day action packed course covers Fire Protection Plans and Symbols, Basics of System Layouts, Electrical Installation Standards, Basic Fire Alarm Systems, Supervisory Service, Detection Methods, Detector Spacing, Power Supplies, System Acceptance, Periodic Testing, Construction Plans, Specifications and Cost Estimates of a mock job, Building Codes, Contracts, Governmental Agencies, OSHA
more...
From Last Minute Training
ACCPAC - Payroll 3 Days
Students will learn how to set up and run the payroll for your company: set up payroll options, create earnings and deduction codes, add employees, enter timecards, calculate the payroll, enter manual and system cheques, recover advances, reverse a pay cheque, and run payroll reports
more...
General Ledger
The foundation for any accounting systems, this General Ledger module provides a robust feature set designed to meet the most demanding budgets and processing needs, supplying you with an accurate account of fiscal activities.
Topics Include:
* Creating account codes and alphanumeric codes
* Transaction entry
* Subledger batch editing
* Batch processing and
more...
Heat Exchangers - Design Operation And Performance
...r understand how to use the applicable API, TEMA and ASME codes, standards and recommended practices. Discussions cover fabrication, materials of construction and costs of tubular units; condensers and reboilers; effect and mitigation of fouling; and causes and prevention of exchanger tubes vibration and damage.
The workshops include practical worked examples to reinforce the key
more...
Elite Customer Service Module 26
...you project.
# We will discuss the significance of basic codes of conduct for elite customer service and how your interactions with a customer should make them feel for better overall results.
# Gain the necessary knowledge to suppress and resolve conflict using a variety of techniques and ideas that are outlined in this session.
Ultimately, by attending this workshop and applying the
more...
Pre-Start Health and Safety Review
The Ontario Occupational Health and Safety Act and Regulation 851 a Industrial Establishmentsa was amended in October 2000, requiring that a professional engineera s report be prepared whenever a process or equipment addition or modification involves any of the following: flammable liquids, safeguarding devices, rack or stacking structures, risk of ignition or explosion, dust collectors,
more...
Microsoft Project 2007 Level 2 - nexient
Who should attend
This course is intended for participants who are familiar with Microsoft Office Project 2007.
Performance Objectives
Upon completion of the course, participants will be able to accomplish the following:
Understand the concepts of word processing, and how to create, save, and open documents for easy document management
Use sample templates, create custom templates, and
more...
Seismic Analysis And Design Of Steel And Reinforced Concrete Buildings
This course provides an opportunity to learn the basic principles and practices of analysis and design of earthquake-resistant design building structures. Static and dynamic analysis of buildings using advanced computer codes is presented.
more...
In-Plant Cranes Hoists and Lifting Devices Types Components Inspection Operation and Safety
This course describes the various types & uses of cranes, hoists & lifting devices available to industrial, commercial & institutional facilities. The regulations, codes & standards associated with the inspection & testing of cranes will be addressed...
more...
From Termark Technical Institute
Fire Alarm Systems Agent
This course is similar to the Alarm Systems Agent Course in that
the first day covers Basic Electricity and Security Electronics and Salesmanship, however in Day Two we cover
Access Control, Fire Alarm Detection Devices, Fire Alarm Control Panels, Building and Electrical Codes as they
apply to Fire Alarm Systems, System Design and Layout Techniques, and the final two hours are dedicated to
more...
Burglar Alarm Systems Agent Course
BURGLAR ALARM SYSTEMS AGENT**, -14 Hours This two day course covers Basic Electricity, Basic
Security and Low Voltage Electronics, Introduction to different Security detection devices and how each is
used, Alarm Control Panels, Wiring, Applicable Electrical and Building Codes, System Design, CCTV and
Access Control, Salesmanship and includes 2 Hours of False Alarm Reduction techniques. This
more...
Understanding and Troubleshooting Programmable Logic Controllers

This 32 hour course is presented in 8 parts over 4 days. Some of the topics we cover include Relay Circuitry , Principles of input, output and logic sections of a PLC. We cover data bits and building a logic ladder. Common Addressing Techniques, Analog, Digital and Discrete modules, Power Supplies for PLC's and detecting common problems. Next we learn how to enter, edit, add or delete program
more...
From Accountserve Ltd
Working With MYOB Software



...references
Set up linked accounts
Determine which GST codes you need for your business
Process day-to-day sales as quotes, orders and invoices
Analyse your debtors
Process the receipt of payment for your customers
Create credit notes
Create purchase orders
Email purchase orders
Converts orders and quotes to bills
Enter Spend Money and Receive Money transactions
Prepare
more...
Setting Up MYOB Software
If youa re an MYOB user who wants to make sure your company files are set up correctly for the most efficient use possible, then this course is just what youa re looking for. Get up and running properly with MYOB and learn how to set up all the relevant accounts, tax codes and card files, correctly. The course shows you how to load opening balances for debtors, creditors, stock and the bank.
more...
From FormaServe Systems Ltd
RPG400 Programming



If your skill set needs the RPG/ 400 language this is the course for you.
This intensive three day course provides delegates with the skills to develop or maintain existing applications written in RPG/ 400 on the i5.
This course covers the old type of RPG and is therefore not scheduled for public courses.
The latest features of IBM i will be demonstrated during this course.
more...
RPG IV Refresher New Advances



This course explains the latest updates to the RPG IV programming language and how it has evolved over the latest releases.
It provides a comprehensive update to this programming language.
This intensive 2 day class covers a wide range of topics beginning with a summary of changes in RPG IV and concepts of the ILE environment.
During the exercises, the students will use the latest
more...
RPG IV ILE Programming



This course explains the concepts of the RPG IV language and how its used within ILE.
It provides a comprehensive introduction to the RPG IV programming language structure and syntax, and will cover the basic concepts of the i5 Integrated Language Environment (ILE).
This intensive five day class covers a wide range of topics beginning with a summary of changes in RPG IV and concepts of the
more...
From Travel Academy of India
Diploma in Travel Studies











...velopment and Spoken English
2. World Geography and IATA codes
3. Itinerary Planning
4. Reservation
5. Fare Construction
6. Ticketing - Automated & Manual
7. BSP a ticketing & reporting
8. Terms & Terminology
9. Documentation
10. Baggage Handling
11. Conventions & Organizations
12. Time Calculation
13. Tours and Tourism
14. Travel Agency Operations
15. Airline Information a
more...
CARGO Management











...Calculation
4. Airline Information a Names, Locations ,Codes etc
5. Airports & Aircraft a Types & Details
6. Consignment Types & Handling Procedures
7. Types of ULDs
8. Ratings a Individual Consignments/ ULDs
9. Acceptance & Dispatch
10. Air Waybill issuance
11. Customs documentation & clearing
12. Forwarders/ Agents a Types & Operations
13. Ground Handling
14. Automation
more...
Airport Ground Handling









... to Airports
3. World and Indian Geography and IATA city Codes
4. Airline Names, Codes and Nationalities
5. Flight Schedules and OAG
6. International Time Calculation
7. Passenger and Cargo Terminal Layouts
8. Passenger Handling and Customer Service
9. Basic Ticketing and Fares
10. Check In/ Counter Handling and Departure /Arrival formalities
11. Baggage Handling - Acceptance and PIR
more...
From PMC - Project Management Centre Inc
Advanced Project Management in Primavera P6





Provides in-depth project management training in P6 client-server-based solution, building off skills learned in the basic course (102). Topics include earned value analysis, updating baselines, importing and exporting project data, and top-down budgeting. This course can be taken in-class or in an online instructor led format. Participants will receive 13 PDUs upon completion.
more...
From Ducat
PRO E Training Institute Noida
STAAD pro e features state of the art user interface, visualisation tools, powerful analysis and design engines with advanced finite element (FEM) and dynamic analysis capabilities. From model generation, analysis and design to visualisation and result verification STAADpro is the professional first choice. STAADpro e was developed by practicing engineers around the globe. It has evolved over 20
more...
From Professional Automation Support Services Ltd
Siemens S5 Advanced


...tion blocks
Programming DBI with COMDBI
Using condition codes and jump instructions in programs
Using Siemens standard function blocks
Analogue Processing
Setting up and testing analogue modules
Using analogue handling blocks in programs
Diagnostics
Diagnostics using the ISTACK and BSTACK
Using the diagnostics organisation blocks
Communication
Installing and testing a
more...
From American Trainco
Air Conditioning and Refrigeration
FREE EPA 608 Technician Certification Testing available with this class
Learning to understand, operate, maintain and troubleshoot your own air conditioning or refrigeration system is what this course is all about. It is perfect for anyone who is involved with HVACR systems in their building or facility. Students get a well rounded introduction in day 1, and then learn to achieve maximum
more...
Plumbing Codes
This one-day class covers the 2009 ICC Plumbing Code and changes effective as of January 1, 2009. The course will cover a general understanding of the code with an emphasized focus on the effects of the general rule changes within the ICC Plumbing Code and its affect on building inspectors, contractors, installers of equipment, and facilities management. A solid understanding of the code changes
more...
Mechanical Codes
This one-day class covers the 2009 ICC Mechanical Code and changes effective as of January 1, 2009. The course will cover a general understanding of the code with an emphasized focus on the effects of the general rule changes within the ICC Mechanical Code and its affect on building inspectors, contractors, installers of equipment, and facilities management. A solid understanding of the code
more...
Energy Codes
This one-day class covers the 2009 ICC Energy Code and changes effective as of January 1, 2009. The course will cover a general understanding of the code with an emphasized focus on the effects of the general rule changes within the ICC Energy Code and its affect on building inspectors, contractors, installers of equipment, and facilities management.
A solid understanding of the code changes is
more...
Electrical Codes for Non-Electricians
... introduction to the most important electrical and safety codes for personnel working in plants and facilities. You will learn what the codes are, for whom they were written and your obligations for compliance.
This is course is designed for those who know little to nothing at all about electricalsafety and electrical installation code and compliance issues. A solid understanding of
more...
Building Codes
This one-day class covers the 2009 ICC Building Code and changes effective as of January 1, 2009. The course will cover a general understanding of the code with an emphasized focus on the effects of the general rule changes
within the ICC Building Code and its affect on building inspectors, contractors, installers of equipment, and facilities management. A solid understanding of the code changes
more...
Boiler Operation Maintenance Safety
...er Operator Duties & Responsibilities
• Boiler Codes and Standards
• Licensing Requirements
• Safety Controls
• Implementing Maintenance Programs
• Basic Water Chemistry
• Efficiency & Troubleshooting
Day 1 - Fundamentals, Operation & Safety
Day 2 - Maintenance, Inspection, Testing & Efficiency
This class is not a substitute
more...
From AVO Training Institute
National Electrical Code

This lecture course is designed to provide a comprehensive study of the National Electrical Code ®. Major changes are also covered. The participant will learn how to apply the code to analyze and solve electrical system problems. Ampacity determination for sizing conductors, selecting overcurrent protection and grounding is used in this practical course. The definitions of electrical terms,
more...
From WELDECC
Visual InspectionVT
Course Objective:
The course aims at introducing
engineers, inspectors and senior
welding supervisors to the
process of visual inspection of
welds including assuring the
compliance with the standards
and codes requirements.
Course
Syllabus of the training course is prepared according the
Recommended Practice of the American Society of Non-
Destructive Testing (SNT-TC-1A). The exams are
more...
From Security University
QSSE Qualified Software Security Expert 5-day Bootcamp
...that are defensive in nature (e. g. checking error return codes before using, other data structures that should have been created, or protecting against using a pointer after it has been released), process-related and risk- related, hacking and XSS . Also included are items on how to prevent attacks with a step-by-step process how to FIX software with counter measures that protect
more...
From SST Systems, Inc.
SST 301 PIPING DESIGN AND STRESS ANALYSIS



...ittee (for over 19 years) and an active member of various codes and standards writing committees (incl. power piping and process piping). The seminar's focus will be on engineering principles, not on any pipe stress program though we use CAEPIPE to illustrate those principles.
Registration closes December 1st, 2008.
More Seminar Information -- http://www. sstusa. com/ pipingseminar. htm
more...
From Advanced Concepts
MS Excel Advanced
... content:
X Custom Formatting: - Number Sections, Number Codes, Date Codes, Speedkeys
X Using Conditional Formats
X Creating Range Names
X Range Names in Calculations
X Paste Special
X Object Linking and Embedding
X Sharing Workbooks with Other Applications
X Importing a Text File into Excel
X Importing Data from Web Page
X Creating, Storing and Custom Workbook Templates
X Default
more...
From Institute of Piping Engineering & Building Services
Piping Design and Engineering Training
...ESS PIPING/PLANT/PIPELINES DESIGN & ENGINEERING ASME B 31 Codes with 100 practical design problems for ASME pressure Design/Hydraulic Design/Stress Analysis.
Training Course Syllabus:
Piping Fundamentals
Introduction, Pipe Dimensions, Pipe Data, Piping Materials & Selection, Codes & Standards, Fabrication & Installation, Piping Joints. Common Abbreviations. Design Documents, Design Bases
more...
From HCit Consultant
Workshop on ICD 9 to ICD 10 Migration


...on, participants should have understood different medical codes used in the USA scenario and their significance.
a Understand ICD9 Vs. ICD 10 differences, business impact at Provider / Payer/ Pharmaceutical sectors.
a Should be able to think through independently whenever a business challenge is given to them with respect to ICD10 conversion for the required application changes, Database
more...
From Ace Learning Centre
IP Refresher Course - Red Seal Ticket Prep
Prepares students to challenge to IP Red Seal Ticket Exam. The course will prepare students to challenge the IP Red Seal exam. The course is 7 weeks in length and meets 2 times a week for 2 hours in each session. Homework is given each session and students are given a large amount of questions that will prepare them for the exam.
This course may also be taken on-line. The time and length of
more...
CONSTRUCTION ELECTRICIAN
...applications of electricity and must ensure that building codes and other safety requirements are followed .
Ace Learning Centre provides help to Student Apprentices , Trainees and Electricians in preparing for following exams:
Electrical Apprenticeship Level 1
Electrical Apprenticeship Level 2
Electrical Apprenticeship Level 3
Electrical Apprenticeship Level 4
more...
ELECTRICAL TUTOR
...applications of electricity and must ensure that building codes and other safety requirements are followed .
Ace Learning Centre provides help to Student Apprentices , Trainees and Electricians in preparing for following exams:
Electrical Apprenticeship Level 1
Electrical Apprenticeship Level 2
Electrical Apprenticeship Level 3
Electrical Apprenticeship Level 4
more...
IP RED SEAL EXAM PREP REFRESHER COURSE July 05 , 2010
...applications of electricity and must ensure that building codes and other safety requirements are followed .
Ace Learning Centre provides help to Student Apprentices , Trainees and Electricians in preparing for following exams:
Electrical Apprenticeship Level 1
Electrical Apprenticeship Level 2
Electrical Apprenticeship Level 3
Electrical Apprenticeship Level 4
more...
From Technology Training, Inc.
Telemetry Systems


This short course introduces telemetry systems, carrier signal modulation and telemetry standards. Background is provided in dB, sensors, filtering, signal waveforms and Fourier analysis, to enhance understanding of telemetry modulation techniques. Data Bus standards, bit encoding, special PCM formatting and time codes are discussed. Range Telecommunications, computer systems, and data handling
more...
From Parts Now! LLC
Printer Communications
This course was created due to the requests of our customers who need to know more about printer communications; print drivers, connectivity, and firmware. This course will address all three sections in detail, including network card configuration, printer connectivity for common Ethernet networks, parallel and USB, driver installation setup and troubleshooting, also firmware, which is quickly
more...
HP LaserJet P3005 P3015 and LaserJet 2400 Series Printer Repair Training
The LJ 2400 and the LJ P3005 may look very much alike from the outside, but are just enough different on the inside that a training course is a good way to learn these popular printers. The newest addition to this trio, the P3015 is not only different on the inside but has new looks as well. All three disassemble very much the same, but parts are completely different. This course will explain
more...
HP LaserJet 4200 4250 4300 4350 Series Printer Repair Training (T)
The 35 ppm 4200 is similar enough to the 45 ppm 4300 that these two printers can easily be taught as one. The engine design is totally new, improving upon the LaserJet 4100 in all areas. A primary focus will be the new technology differences between these two printers, as well as a hands on teardown and break fix information.
This is a trouble-shooting class which means printers are bugged with
more...
HP LaserJet P4014 P4015 P4515 Series Printer Repair Training (T)
This class will cover the LJ P4014/ 4015/ 4515 printers. These printers are quite similar to the LJ 4250/ 4350 series however modified enough to classify them as an entirely new print engine series. These printers are 45, 52 and 62 pages per minute respectively and have a processor speed of 540Mhz. The student will find new challenges while attending this class that he/ she will be able to use in
more...
From TechKnowledge Systems
The Remodeling Game
...nics, new products, Lead Paint (RRP) requirements, energy codes, health care reform, unstable home prices, lack of consumer financing, and changing family structures have changed your world.
Business volume is down for most companies, large and small. What if this is as good as it will get for years? Learn the new rules, learn what you can do now to survive and thrive.
Accreditation;
more...
From Innovate Llc
CEE615 Advanced Digital Communications

This course can be held at your company site for 6 or more participants. Please call us at 1. 407. 780. 5585 or send an email to innovatellc@gmail. com
CEE615 Advanced Digital Communications
This course explores more details of digital communication systems and addresses advanced knowledge of coding theory. Topics may include: white Gaussian noise channels; binary linear block codes; trellis
more...
CEE610 Introduction to Digital Communications

This course can be held at your company site for 6 or more participants. Please call us at 1. 407. 780. 5585 or send an email to innovatellc@gmail. com
This course serves as an introduction to the theory and practice behind many of today's communications systems. Topics covered include: digital communications at the block diagram level; coding theory; data compression; Lempel-Ziv algorithm;
more...
CEE630 Principles of Wireless Communications

This course can be held at your company site for 6 or more participants. Please call us at 1. 407. 780. 5585 or send an email to innovatellc@gmail. com
This course is an introduction to the design, analysis, and fundamental limits of wireless transmission systems. Topics to be covered include: wireless channel and system models; fading and diversity; resource management and power control;
more...
From Knowledge Source Inc
Microsoft Project 2007 Crash Course Learn Project in Two Days
...ct Costs - Usage
Work Breakdown Structure Defined
WBS Codes
Importing and Exporting Files
Lesson 10: Finishing Your Project
Drawing
Updating and Filtering Your Project
Progress Lines
Tracking Progress
Using the Project Guide
Status Indicators
Lesson 11: Using Macros
Recording / Editing / Deleting Macros
Copying Macros from Other Project Files
more...
From Fands Infonet Pvt. Ltd.
A One Day Program On Business Etiquette
...tte
* The do's and don'ts in dressing
* Various dress codes for different occasions
* Power dressing
* Accessories for Men and Women
Non verbal communication
* Importance of eye contact
* Body language
* Correct gestures and postures
Dining Etiquette
* Attending office parties
* Drinking Etiquette
* Table manners
General Tips
* Office
more...
From SAI Global
RABQSA Certified Internal Auditor for Information Security

...equirements of ISO/ IEC 27001: 2005 and the complementary codes of practice standard, ISO/ IEC 27002: 2005, the course will show internal auditors how to maintain the availability, integrity, continuity and security of your organizationa s information. Upon completion of this course attendees will be able to plan, schedule, document, and record audits needed to maintain their ISMS
more...
From Team Training Services
SIA Approved CCTV Operator
To work within the security industry, an individual must have undergone a structured programme of training as specified by the Security Industry Authority (SIA).
Operators of public space (PSS) CCTV systems
Team Contracts Services will ensure that training is designed and delivered to suit the needs of your staff, customers and your organisation, and to facilitate this, we deliver accredited
more...
From RRC Training
NEBOSH International General Certificate Block Release


The NEBOSH International General Certificate concentrates on local legal requirements, incorporating international standards (such as ILO Codes of Practice) and general principles of good practice, making it relevant to personnel all over the world. It has been designed for managers, supervisors and employee representatives and is ideal for anyone who wants to establish a career in health and
more...
From Vtechnocrat Solutions
SAP FICO Instructor led Online Training





...2) Assign country to calculation procedure
3) Define Tax codes for sales and purchases
4) Define Tax accounts a Vat Payable A/ c & Excise Duty A/ c
5) Make tax category mandatory in Sales A/ c and Raw Material A/ c
6) Automatic assignment of tax accounts
7) Post Sales Entry
8) Post Purchase Entry
Withholding Taxes a Tax Deducted at Source (TDS)
1) Check withholding tax countries
more...
From Predicon
API 570 Piping Inspection Code Inspection Repair Alteration and Rerating of In-service Piping Systems
... various defects, and repair/ alteration rules of various Codes and Standards. Evaluation methods for several types of defects will be described, and their use demonstrated using sample problems.
WHO SHOULD ATTEND?
a Inspection engineers and supervisors.
a Individuals who are responsible for evaluating the mechanical integrity of in-service pipelines and piping systems in process plant
more...
From ROHR2 - SIGMA GmbH
ROHR2 Pipe Stress Analysis training
The courses are held by engineers, experienced in the field of pipe stress engineering and provides participants with knowledge of the ROHR2 handling and effective realization of the comprehensive possibilities
The trainings will be held in Unna, Germany at the SIGMA own ROHR2 training center
Training agenda
- Basics of static calculation
- ROHR2 tasks
- System input, Supports
- Loads,
more...
From General Computers
MS Excel Macro L2
The participant should be able to record and modify recorded macros in Excel, to understand the basic VBA codes, to write macro with VBA code manually, to control and loop blocks of instructions and to create custom dialog box to run macros.
more...
MS Excel Macro Level 1
Participants will be able to record macros, to edit and to run macros, to enhance macros with the use variables in the macro VBA codes
more...
From Skillineers
Professional Training Course in Pipe Stress Analysis



...ping system stress analysis requirements of International Codes.
a To understand how to use piping analysis software to meet these requirements.
a To understand specific illustrations based on the Computer Aided Stress Analysis.
Course Overview
a Role of the stress analyst.
a When to perform stress analysis.
a Piping Code History.
a Stress theory; evaluating
more...
Professional Training Course in Process Design Engineering


... Process requirements for design as per the international codes & standards.
To be able to apply the requirements of the relevant industry standards of the mechanical design of equipments used in the process industry.
To specify appropriate physical property models to simulate processes.
Course Overview
Overview of Industry & role of Process Engineer in various fields.
Process Flow
more...
Professional Training Course in Piping Design Engineering
...c piping requirements for design as per the international codes & standards.
To understand how to design cost effective new installation.
To understand how to create cost effective design in trouble shooting as well as while improving existing piping system.
Course Overview
Introduction to Piping and Interaction & Interface for Piping Engineers.
Piping Elements.
Flange Class
more...
Professional Training Course in Civil Structural Design Engineering
...g Calculations.
Concrete Structure Design with relevant codes & standards. Steel structure design with relevant codes & standards.
Equipment supporting structures and foundations.
Pipe Racks and Sleepers.
General Civil Works a Roads, Drains, CRWS (Contaminated Rain Water Sewer), OWS (Oily Water Sewer), Paving, Dyke Wall, Tank Farm Area, Boundary wall, fence, gate, Local support and
more...
Professional Training Course in Pressure Vessel Design Engineering
...e Vessel requirements for design as per the International codes & standards.
a To be able to apply the requirements of the relevant industry standards of the mechanical design of Pressure Vessels used in the process industry.
a To be able to do material selection for Pressure Vessels.
Course Overview
a Overview of Industry and role of Pressure Vessel Design Engineer in various
more...
From IIFLY Aviation Training Centre
Cabin Crew Air Hostess Training
...nt
Geography - Countries, Cities, Airports, Capitals, Codes, Currency, Travel Documents, TIM, Health Care and Travel Insurance, Hotels, Car Rental, Packaged and Individual Tours, Time Theory, Planning Itinerary, OAG Flight Guide, Airport & Aircraft Services, International Conventions, Freedoms of the air, International Organisations, Customer Service, Fare Construction - TC Areas &
more...
From PI ETA Consulting Company
Regulatory Compliance

Highlights
* Understand the regulatory framework governing the financial services industry.
* Know essential regulations that have to be complied with.
Introduction to Basel II.
Seminar Facilitator(s):
Mr. Adam K. K. Wong
B. Acc, FCPA, Certified Professional Trainer
Dr. Jeffrey C. K. Lim
Ph. D., C. Sci., C. Math., FIMA, FRM, PRM, B. Fel
more...
From S2 Infotech Pvt Ltd
CDMA Technology and Networks
...e explained. This module describes the coding techniques, codes such as Walsh Codes and PN Codes. This module discusses the overview of call processing also explores various types of handoffs and power control.
Who Should Attend:
This module is designed to suit individuals comfortable with basic wireless concepts and interested to learn CDMA technology and networks.
Course
more...
Basics on Transmission systems
...ing Method and Bit Error Rate. This module discusses Line Codes such as NRZ, RZ, AMI and HDB3, CMI and 5B6B. This module also provides an insight on Frequency Characteristics, Digital Radio and Transmission Media. The module ends with an overview on transmission systems such as UHF, Microwave, Optical Fiber and Communication through Satellite, Basics of switching systems. On completion of this
more...
From Dataspark
ExcelVBMS Access training in Bangalore
We take this opportunity to introduce ourselves as a DATASPARKa a Leading name in Corporate Analytics Training.
We provide training for analytical software like Advance Excel and SAS for Analytics.
Our Advance Excel Training Includes:
1. Advanced Data analysis and data management using Excel 2003/ 2007.
A) Advanced Data Analysis: - Pivot tables & Reports, Goal seek, Solver function,
more...
From Institute Of Nondestructive Testing & Training - India
ASNT Level II Level III API AWS Seminars 2011 from INDTT
...ME Sec V, ASME Sec IX & ASME Sec VIII Div I
Required Codes & Standards
As in the attached publication effectivity sheet the effective editions of the publications required for the current Vessel Inspector Certification Examination.
For more information, visit
http://www. api. org/ certifications/ icp/ programs/ index. cfm
API 653 Aboveground Storage Tank Inspector
more...
From Peopleclick Technosolutions Pvt. Ltd
sap fico training bangalore
...ING.
a Organization Structure
o Company
o Company Codes
o Business area , Profit Centers
a Financial Accounting Global Settings
o Fiscal year Variant
o Field Status Variant
o Tolerance Groups
o Document types & Number Ranges
a Master Data
a GL Planning (New)
a Introduction to New GL Accounting (New)
a Parallel Currencies
a Foreign Currencies
a Interest
more...
From Pioneer Engineering
Dynamic Balancing


Dynamic Balancing
Follows Category II - IV Guidelines Established by ISO 18436-2, a Condition monitoring and diagnostics of machine a Requirements for training and certification of personnel a Part 2: Vibration condition monitoring and diagnosticsa
Synopsis
In this hands on course students will learn how to properly identify and diagnose unbalance as well as perform single and two
more...
From Erpselftraining
becoming an SAP FICO Consultant in short time











...re and Global Settings
-. Creation of Company, Company Codes
-. Business Area, Consolidated business area
-. Fiscal Year, Posting Period, Posting Keys
-. Document Number range, Document type
-. Tolerance Group
-. Field Status Group
General Ledger Accounting
-. Chart of Accounts
-. Account Groups
-. Retained earnings account
-. Creation of GL accounts
-. Posing of GL entries
more...
From Shraddha Technical Institute
Professional Program in Pipeline Engineering
...ne-Input and Outputs
2. Process Diagrams (PFD, P&ID)
3. Codes and Standards
4. Pipeline Materials
5. Material Take off
6. Pipeline Supports
7. Pipeline Routing, Field layouts
8. Pipeline Wall Thickness Calculation
9. Configuration of equipments
10. Installation methods
11. Upheaval buckling
12. On-bottom stability
13. Materials: Purchase Requisitions & Technical Bid Evaluations
more...
From AccIT - (PASTEL) Accounting IT Solutions
Pastel Payroll Problem Solving
This course takes you through the process of identifying a problem, determining the cause and finding a solution for the problem you might have in Pastel Payroll. The solution must furthermore be applied to achieve an expected outcome.
You work in a training company - problems relating to tax calculations, leave, employee rates, bank transfers, cost centres and job codes, backups, terminating an
more...
From GITS Academy
MS Excel Advacned training Bangalore
...Set Forms Reports, Properties, Criteria Statements, Error Codes, Functions Etc.
TIMINGS:
We are providing classes during weekends (2-3 hrs)
Training given by Real time expert.
For more details please contact us at. 9632240775
Or mail us at a gitsedu@gmail. com
Please contact:-
GITS ACADEMY
#16, 3rd floor, 10th cross, Sampige Road
Above
more...
From Envico LTD
SMSTS Refresher
SMSTS Refrehser training course was introduced on 1 April 2002 as part of the Site Management Safety Training Scheme. All Site Management Safety Training Scheme (SMSTS) certificates issued after 1 January 2001 are valid for a five year period from the date of issue. The two day SMSTS refresher course will enable current SMSTS certificate holders to renew their qualification.
The SMSTS Refresher
more...
From Future Trends Services
Industrial, Occupational and environmental Health and Safety






...Health
Work Place hygiene
ENVIRONMENT:
E(P)A 1986 & CFR codes
Risk management program.
Hazardous waste-cradle to grave.
Emergency planning, preparedness & response.
ISO 14001.
RISK MANAGEMENT PROGRAM
Worst case & more likely case scenarios.
Develop &/or assist in developing scenarios.
Evaluate scenarios to determine impact (Charm software).
Facilitate or assist in community briefing.
more...
From Corporate Education Group
ITIL Service Management Essentials
...set of books that provides comprehensive and interrelated codes of practice in achieving the efficient support and delivery of high-quality, cost-effective IT services. The ITIL Foundations Certification Examination tests for an essential level of understanding of ITIL concepts. This course uses a combination of lecture, practical group discussions, sample exams, and exam preparation and
more...
From Chameleon - Global ITIL Experts
ITIL Practitioner Release & Control
...butes and Naming Conventions
Design and implement impact codes, priority codes, naming conventions for Release and Control process and identify attributes of CIs and all required relationships.
Procedures and Working Instructions
Plan, elaborate, optimise and carry out procedures for Release and Control process with Configuration Management, implementation of procedures and working
more...
From Corporate Education Group
Introduction to Java Programming
...
8. Characters and Strings
Char Data Type Character Codes ASCII and Unicode String Class String Input and Output String Methods
9. Modular Programming
Monolithic Programs Static Variables and Methods Functional Modularity Object Modularity Top-Down and Bottom-Up Development Pass-By-Value and Pass-By-Reference Nested Classes
10. Arrays
One Dimensional Arrays Subscripts
more...
