Instructor Led Construction Training
Construction Training Provider? - Tell us about your Training!
Please select the location nearest to you:
United States
United Kingdom
Singapore
India
United Arab Emirates
Egypt
Canada
South Africa
Kuwait
Spain
From HAZMAT Plans & Programs, Inc
OSHA 30 Hour Training for Construction, Denver, CO



...commended best safe work practices as required under OSHA Construction Standards, 29 CFR 1926. This training will provide your employees the knowledge and tools for recognizing and mitigating hazards most commonly found on a construction site. All participants in the 30 Hr training will receive a copy of OSHA's Standards, 29 CFR 1926, for Construction. The OSHA 30 Hour Outreach training is a
more...
OSHA 30 Hour Training for Construction, Denver, CO
Denver, CO - OSHA 10 Hr. Training for Construction




...Construction is an instructor-led course held in our Denver, Colorado training facility. The 10 Hour Construction safety seminar is an introductory course that teaches workers hazard recognition and safe work practices in accordance with OSHA Construction Standards, 29 CFR 1926. A US Department of Labor OSHA wallet card will be obtained for each student who completes the course. These cards
more...
Denver, CO - OSHA 10 Hour Construction Outreach


...Construction is an instructor-led training course held in our Denver, Colorado training facility. The 10 Hr. safety seminar is an introductory course that teaches workers hazard recognition and safe work practices in accordance with OSHA Construction Standards, 29 CFR 1926. A US Department of Labor OSHA wallet card will be obtained for each student who completes the course. These cards take
more...
Denver, CO - Confined Space Training


Hazmat Plans & Programs Confined Space training is a "Competent Level" Course. This safety course covers OSHA's requirements for Confined Space Safety found under 29 CFR 1926 21 and Permit-Required Confined Space, 29 CFR 1910 146. The Confined Space course is Instructor-led and takes place in Denver, Colorado.
- - - - - -
Confined Space training outcomes - students will become
more...
Confined Space Training - Denver, CO


The Confined Space training course covers OSHA's requirements for Confined Space Safety found under 29 CFR 1926 21 and Permit-Required Confined Space, 29 CFR 1910 146. The Confined Space safety training is an Instructor-led "Competent Level" course that takes place in Denver, Colorado. Next Confined Space Training Date: Feb. 29, 2012
Student objectives:
Become knowledgeable in the following
more...
HAZWOPER 40 Hour Training, Instructor Led Training in Denver, CO


...volved with the removal or handling of underground tanks, construction workers on sites where hazardous wastes are known or expected to exist and have the potential to be encountered and HAZMAT Emergency Response teams.
HAZWOPER topics include:
- Introduction to OSHA & Training Requirements for Hazardous Waste Operations and Emergency Response (HAZWOPER)
- Review of Historical Events
more...
Scaffolding Safety




...vers the following subject areas, in accordance with OSHA Construction Standards found under 29 CFR 1926. 450 Subpart L :
- General Requirements, Scope, Application and Definitions
- Capacity and Platform Construction
- Competent Person for Scaffolding and Responsibilities
- Scaffold Inspection Requirements
- Ariel Lifts
- Training Requirements
- Fall Protection for Scaffold
more...
Oil and Gas 24 Hour Hazard Recognition - Denver, CO


.... The course gives students an overview of pertinent OSHA Construction and General Industry regulations and how they apply to the Oil and Gas Industry. Discussion will concentrate on how adherence to both API and OSHA standards help to create a safer and healthier work environment.
Course Topics:
* Introduction to OSHA, OSH Act, Employer/ Employee Rights
* OSHA Focus Four
*
more...
From Human Resource & Organisational Development Consultancy (HRODC) Postgraduate Training Institute
Accounting and Finance World Bank Compliant Course
PROGRAMME OUTLINE
PART 1: A CONCEPTUAL FRAMEWORK: SETTING THE SCENE
Day 1: The Accountant and the Accounting Environment
Accounting a Defined
The Development of a Conceptual Network
External Reporting
Internal Reporting
Types of Business Entity
Sole Trader
Partnership
Limited liability Company
Formation of Business Entity
Running the Business
Accounting Information
Meeting
more...
Accounting and Finance World Bank Compliant Course
PROGRAMME OUTLINE
PART 1: A CONCEPTUAL FRAMEWORK: SETTING THE SCENE
Day 1: The Accountant and the Accounting Environment
Accounting a Defined
The Development of a Conceptual Network
External Reporting
Internal Reporting
Types of Business Entity
Sole Trader
Partnership
Limited liability Company
Formation of Business Entity
Running the Business
Accounting Information
Meeting
more...
Project Management in Action Managing World Bank Projects
...rement From United Nations Agency
Procurement Agents and Construction Managers
Inspection Services
Procurement in Loans To Financial Intermediary Institutions and Entities
Procurement under Public Private Partnership (PPP) Arrangements
Performance Base Procurement
Procurement under Loans Guaranteed by the Bank
Community participation in Procurement
Use of Country Systems
Documents to
more...
Planning Costing and Budgeting for Executive Decision-Making


...Costing (ABC) in manufacturing and services
5. Budget Construction and Control
- Budgeting as part of planning process and as a communication process
- Nature and purpose of budgets for planning and control
- Budgetary control and variance analysis
- Responsibility centres: cost, profit and investment
- Segment reporting internally and externally
- An
more...
Personnel and Occupational Testing


The details of the course:
Objectives:
- Appreciate the value of employment testing
- Determine measures to enhance test security
- Ensure that the highest ethical standards are maintained for test users
- Exhibit their ability to use test administration guide, appropriately
- Effect percentile classification of test and test scores
- Indicate the measures that need to be taken in
more...
Personnel and Occupational Test Questionnaire Design and Results Analysis


...Use Simple But Unambiguous Words Or Terminologies In Test Construction:
- Determine The Implications Of Test Results, As An Indicator Of How An Individual Will Enact A Particular Role
- Determine The Test Dimensions That Need To Be Addressed
- Maintain Objectivity And Sound Judgement In Test Construction
- Guard Against Blind Interpretation Of Test Results
- Make Effective
more...
MSc Human Resource Training and Development Management


...Use Simple But Unambiguous Words Or Terminologies In Test Construction:
- Determine The Implications Of Test Results, As An Indicator Of How An Individual Will Enact A Particular Role
- Determine The Test Dimensions That Need To Be Addressed
- Maintain Objectivity And Sound Judgement In Test Construction
- Make Effective Recommendations, At The End Of Test Analysis And Report,
more...
From PetroEDGE
DEEPWATER WELL ENGINEERING 26 30 March 2012 Kuala Lumpur Malaysia


Training Course Overview
This 5 day training course examines the difficulties, challenges facing todaya s deepwater drilling programme designers and personnel where wells are being drilled in increasingly difficult downhole and environmental conditions. Ever increasing cost and legislation further contribute to design and operational pressures.
From this training course, you will have
more...
DEEPWATER WELL ENGINEERING 26 30 March 2012 Kuala Lumpur Malaysia
9th run in Malaysia Revised Content EPCIC Contract Management Essential Elements of International Contract Law 13 15 Decemb


...construction and procurement business, the success of your project is dependent on your practical a know howa in contract management. Understanding the essential ingredients of contracts and mastering the fundamentals will equip you to identify vague contracts, avoid dangerous and often hidden terms, and better understand your position and your project.
PetroEdge has researched and
more...
Subsea Pipeline Engineering with Andrew Palmer Roger King
Subsea pipelines are the arteries of the offshore industry, and around the world more than 18, 000km are in service. Part of almost every project, they often form a large component of project cost. This course will provide a complete and up-to-date overview of the area of Subsea Pipeline Engineering, taking delegates through the pre-design phase, design, construction, installation, operation and
more...
3rd run in Asia COMPLETION DESIGN SCHOOL 27 June 1 July 2011 Kuala Lumpur


...nd supervisors who already have an understanding of well
construction methods, but who would benefit from a more detailed knowledge completion design. The
course will concentrate on the important aspects of completion design and what makes a safe and
efficient well.
A common thread of practical examples are used througha out the course. The exercises are based around
data all taken from a
more...
3rd Run in Asia Subsea Pipeline Engineering 7th - 11th March 2010 Kuala Lumpur



...g, taking delegates through the pre-design phase, design, construction, installation, operation and maintenance.
It will give a complete picture of the work of design engineers and pipeline construction companies, using actual case studies from around the world to highlight the topics discussed. While the course requires no previous experience, this is not a superficial overview. The
more...
Essential EPC Contract Management and Law For EPC Engineers Procurement and Non-Legal Professionals in Oil Gas 1 - 3 December



1. Safeguard your interests by understanding the basics of contract law in plain English and learning simple contract language risk mitigation techniques
2. Quickly identify dangerous words/ phrases in the contracts of others that could cost your company millions
3. Effectively manage risk on your project with your companya s contract by learning the purpose and potential pitfalls of
more...
Subsea Pipeline Engineering 29 - 02 December 2010





...g, taking delegates through the pre-design phase, design, construction, installation, operation and maintenance.
It will give a complete picture of the work of design engineers and pipeline construction companies, using actual case studies from around the world to highlight the topics discussed. While the course requires no previous experience, this is not a superficial overview. The
more...
2nd run in Asia! COMPLETION DESIGN SCHOOL
This course is aimed at engineers and supervisors who already have an understanding of well construction methods, but who would benefit from a more detailed knowledge completion design. The course will concentrate on the important aspects of completion design and what makes a safe and efficient well. A common thread of practical examples are used through-out the course.
more...
From The Career Center
AutoCAD Level 1
Upon completion of AutoCAD 2009 Level 1, the student will be able to create a basic 2D drawing using drawing and editing tools, organize drawing objects on layers, add text and basic dimensions, and prepare to plot. For maximum flexibility, the course is divided into two parts, the first presenting essential skills, the second covering more sophisticated techniques for drawing setup and
more...
AutoCAD Level 1
From Lorman Education Services
Public Contracts and Procurement Regulations
...effectively coordinate the public procurement process for construction services, but also how to make strategic decisions concerning bid protests, contractual disputes and project close-out.
Our experts will show you how public works projects are awarded and what you should do if you encounter a problem along the way. Presented from both a legal and practical perspective, this seminar will
more...
Public Contracts and Procurement Regulations
Fundamentals of Construction Contracts: Understanding the Issues
...construction contracting - what you don't know could hurt you. /strong
Contracts are a legally charged part of every construction project - they can impact the rights and remedies of owners, lenders, contractors, subcontractors and suppliers positively or negatively. Building a strong knowledge of construction contracts and related terms and conditions will go a long way in helping you avoid
more...
Building Codes
Benefits strong Don't just guess - know that your project is code-compliant. /strong
Avoid having to rebuild your building - and prevent mistakes and fines before they happen. Come to this seminar and find out how building code compliance at the front end will save you from headaches, charges and costly project delays throughout the building process.
Register today and hear experts simplify
more...
Construction Lien Law
...in the event of payment disputes or litigation.
Handling construction payment disputes in Ohio can be a turbulent process, but armed with the necessary legal knowledge, you can successfully manage even the most complex and costly situation. Register today!
Benefits for You
- Correctly identify what property is subject to a lien and who is entitled to recover payment
- Properly fulfill
more...
Fundamentals of Construction Contracts: Understanding the Issues
...construction contracting - what you don't know could hurt you. /strong
Contracts are a legally charged part of every construction project - they can impact the rights and remedies of owners, lenders, contractors, subcontractors and suppliers positively and negatively. Building a strong knowledge of construction law will go a long way in helping you avoid disputes.
Attend this seminar and get
more...
Basic Commercial Leases
Benefits strong Protect your organization - know the ins and outs of commercial leases. /strong
Join us for this must-attend seminar and get surefire techniques for overcoming challenges surrounding commercial leases. This seminar will walk you through the components of a commercial lease, including basic elements to include. In one day you will learn valuable tips in drafting the leases in
more...
What to Do When Construction Projects Go Bad
...construction project nightmares in their tracks - get on the right track from the start. /strong
Attend this seminar and make sure your next project is free of claims and disputes - and learn how to effectively handle these problems when things go wrong. Regardless of how well-planned your construction project is, unexpected circumstances can impede your success and potentially cost you far
more...
Building Codes
Benefits strong Don't just guess - know that your project is code-compliant. /strong
Prevent mistakes and fines before they happen. Attend this seminar and be proactive in learning about the latest changes to building codes in British Columbia.
Register today and learn to handle even the most complicated building code issues without hassles. You will walk away with practical how-to's for
more...
Legal Aspects of Condominium and Homeowners' Associations
Benefits strong What you don't know can hurt you - stay updated on condominium and homeowners' association law. /strong
The downturn in the real estate market has been especially tough on condominium and other homeowners' associations. Are you prepared to confidently address the questions and concerns associated with structuring and operating these entities?
Attend this seminar and develop an
more...
Prevailing Wage Law
Benefits strong Discover no-hassle ways to comply with prevailing wage law - and get the job done! /strong
Prevailing wage is a mandatory component of many public works projects. Unfortunately, the law often raises more questions than it answers ... What is the prevailing wage? What paperwork do I need? How can I avoid liability and complaints? What if I need help? Let's start with this seminar.
more...
Construction Claims
.... /strong
You can learn, in just one day, how to handle construction claims without losing valuable project time and money. Our experienced and well-respected professionals can even give you the tips you need to avoid claims altogether. All you have to do is enroll in this seminar today.
Attend this seminar and get valuable information on defect claims in Florida construction projects. With
more...
Minimizing and Managing Risks and Disputes in Construction
...construction claims and litigation - without even realizing it? /strong
From preconstruction issues to project closeout, managing the construction process is complex. To maintain control and minimize the risks inherent in the construction process, you must stay current on construction issues and trends.
Whether you are new to the profession or very experienced, this seminar will provide you
more...
Building Assessments
Benefits strong Proper building condition assessments can save you headaches and money - /strong
Understanding what to look for in a building condition assessment can help you find potential problems early before they turn into major expenses. Attend this seminar and get the information you need to conduct audits and determine repair needs early. Our expert faculty will walk you through common
more...
Mitigation of Damage to Structures Adjacent to Construction Sites in Urban Environments
...rategies for mitigating damages to structures adjacent to construction sites? /strong
Register today and stay abreast of the latest issues relating to mitigating damages to adjacent structures in urban environments. Our seasoned professionals will provide practical answers to your most pressing questions about building damages. You will get an inside look at how to respond to confusing issues
more...
Understanding Land Records
Benefits strong Understanding land records is critical to your success! /strong
Attend this seminar and get the practical information to better understand the process of researching and evaluating land records. Our expert speakers will help you understand how to identify real property interests and sources of land information, explain how property interests are created and transferred, and
more...
Basic Commercial Leases
Benefits strong Ensure nothing gets overlooked - get on the road to success in commercial leasing. /strong
Register for this information-packed seminar and get a win-win approach to handling commercial leasing terms and current issues. Get all your toughest questions answered regarding commercial leases and tenant identity. Find out how you can prosper in spite of complex laws.
We will show you
more...
Managing Construction Projects
...et - minus costly claims and lawsuits. Staying current on construction issues and trends has never been this important and it's never been this easy. Attend this seminar and hear industry professionals share their wealth of experiences to help you avoid frustration so you can look forward to your next project with confidence.
Whether you're new to the profession or very experienced, this
more...
Role of BIM in the Planning, Design, Construction and Maintenance of Complex Buildings
... information modeling, its current and future role in the construction process, and its impact on liability and traditional construction legal principles. Our experienced professionals will explore the nuts and bolts of BIM, including how it's developed and how it may be implemented and used on construction projects. You'll learn about the legal impact of BIM to standard construction law
more...
Understanding Geotechnical Reports and Designs
...no-go decisions through completion of foundation and site construction. You need to understand geotechnical reports in order to make decisions regarding foundation and site construction methods and costs.
Attend this highly informative seminar and get a road map to understanding the geotechnical process as it pertains to site selection, site evaluation and site development. Don't wait -
more...
Everything a Construction Player Should Know About Insurance
...construction insurance nightmares in their tracks - get on the right track from the start. /strong
Liability insurance is a critical component of risk management for every owner, general contractor or subcontractor today. Attend this seminar and learn the basics of liability insurance, including covered risks. You'll get up to speed on cutting-edge issues facing the parties and acquire tools
more...
Legal Hot Topics and Current Issues in the Construction Industry
...strong What you don't know can hurt you - stay updated on construction law and make your next project hassle-free. /strong
Join us for this innovative seminar and get up to speed on current issues in the construction industry. Our seasoned professionals will provide practical answers to your most pressing questions regarding insurance, green construction and more! Avoid problems down the
more...
Tricks, Traps and Ploys Used in Construction Scheduling
...ct your project - understand the risk and benefits of the construction schedule.
Efficiently plan and construct your next project - join us for this seminar and stay abreast of the latest issues surrounding construction scheduling. You'll gain an understanding of CPM as both a claims analysis tool and management tool.
Register today to gain the practical insight you need to deal with any
more...
Using OCIPs and CCIPs
...ing to OCIPs and CCIPs to insure some or all parties to a construction project. Whether you're the sponsor of a program or an enrolled party in someone else's program, this seminar will help you navigate the complexities of contract language, bid credits, administrative procedures and coverage issues that can make or break your success on a project.
Attend this cutting-edge seminar and get the
more...
Green or Sustainable Construction
...ques that top professionals have used to succeed in green construction. Building green doesn't have to mean sleepless nights and heated arguments with your design team. Find out how by signing up today!
Benefits for You
- Stay updated on the latest green products and technologies for both new and existing industrial buildings
- Hear how Steelcare in Hamilton built Canada's first industrial
more...
Construction Management/Design-Build
...construction management and design-build - what you don't know could hurt you.
Attend this enlightening seminar and stay abreast of the latest issues relating to construction management and design-build. Our seasoned professionals will provide practical answers to your most pressing questions about risk management. You'll get an inside look at how to respond to confusing issues surrounding
more...
What to Do When Construction Projects Go Bad
...construction project nightmares in their tracks - get on the right track from the start.
Attend this seminar and make sure your next project is free of claims and disputes - and learn how to effectively handle these problems when things go wrong. Regardless of how well-planned your construction project is, unexpected circumstances can impede your success and potentially cost you far more in
more...
Collecting Construction Payments
...s, you can collect your payments without fear! What every construction professional needs to know.
Attend this enlightening seminar and stay abreast of the latest issues relating to collecting construction payments. Our seasoned professionals will provide practical answers to your most pressing questions about extras and changes. You'll get an inside look at how to respond to confusing issues
more...
How to Prevent the Potential Hazards of Green Design
Green buildings are taking the LEED®. Don't just get in line - get ahead
Stay ahead of the curve - learn how to incorporate sustainable designs into your next project.
The green building industry is gaining market share and still growing. Green is everywhere - but how do you make it work in your project? Sign up for this seminar and get the knowledge you need to separate green design hype from
more...
Builders Liens
...erstanding of the key legal issues that commonly arise on construction projects in British Columbia in relation to builders liens - and an up-to-date knowledge of the latest developments in the law. You'll learn about related topics essential to understanding builders liens, including the trust, and labour and material payment bonds.
Handling construction payment disputes in British Columbia
more...
Real Estate Development From Beginning to End
The basics are the same in good times and in bad - learn them from the experts.
Developing real estate is tough - its even tougher in a down economy. Learn what others are doing to maneuver through and succeed in these challenging times.
Each link in the complex and multifaceted real estate development process affects the success of the project. Do you have every angle covered? This seminar
more...
Easements, Covenants and Similar Rights
You've found yourself face-to-face with an easement - now what?
You can get what you need from your real estate despite the intimidating complexity of easements, covenants and rights of way. Whether you're looking to comply with them, fight them or draft them, our local experts will give you the know-how you need to succeed - without getting caught in exhausting and expensive legal battles.
Come
more...
Historic Preservation: Easements, Tax Incentives and Other Considerations
Learn how to navigate through complex historic preservation procedures - and prevent costly mistakes.
Attend this enlightening seminar and stay abreast of the latest issues relating to historic preservation in New York. Our seasoned professionals will provide practical answers to your most pressing questions about tax incentives. You'll get an inside look at how to respond to confusing issues
more...
Construction Management/Design-Build
...construction management and design-build.
Join us for this innovative seminar and get up to speed on how construction projects are undertaken today. Understand the intricacies of two widely recognized methods - design-build and construction management. Get a handle on complicated issues surrounding these delivery methods and the respective risk allocations among the various parties. Don't wait
more...
Plan Reading and Scheduling
...ortance of documentation in the successful prosecution of construction projects, with special emphasis on the construction plans and progress schedules. Find out how to read, understand and interrelate all the parts of construction drawings - plans, sections, elevations, details and other information.
Learn how to read both bar chart and CPM progress schedules. Discover how these documents may
more...
Change Orders
...ght track from the start.
As a professional involved in construction projects, you know how important it is for change orders to accurately reflect the intent of all parties. Hastily negotiated and vaguely drafted change orders fail to express the intent of parties and - more often than not - lead to unwanted and unnecessary disputes.
Attend this highly informative seminar and learn about
more...
New Updates to Business Tax
Protect your organization - get the latest business tax updates.
Register for this information-packed seminar and get a win-win approach to financial considerations related to business taxes. Hear about the latest trends in case law. Get all your toughest questions answered regarding goods and services tax. Find out how you can prosper in spite of complex laws and changing legal standards in
more...
How Design Documents Can Prevent or Cause Construction Claims
...construction claim nightmares in their tracks - get on the right track from the start.
Join us for this must-attend seminar and gain a clear understanding of the relationship of design documents to construction claims. Gain winning strategies for navigating the labyrinth of risk management issues. Solve your toughest problems regarding claims without worry. Avoid problems down the road by
more...
Concrete From A to Z
...te? Besides being the most popular and versatile building construction material, concrete can also be the most complicated to work with. As such, anyone involved in the construction process should have a working knowledge of concrete material issues.
Attend this seminar and you'll get a comprehensive overview of concrete as a building material, including nondestructive testing methods,
more...
Legal Issues in Construction Disputes-Three Key Questions
...Construction Disputes - Over the last 20 years, the construction industry has changed significantly. Different delivery systems have developed making less relevant the traditional design-bid-build structure upon which most construction disputes have been decided. There has also been a substantial effort to use damage waivers and liability limits as a means of controlling runaway verdicts.
more...
Understanding California's Public Construction Bidding Process
...Construction Bidding Process - Learn how to navigate through complex public bidding procedures and prevent costly mistakes.
Are you a construction contractor or subcontractor considering bidding on public contracts, but want to understand the process better? Are you employed by a public agency that wants to take advantage of construction contracting options while minimizing the likelihood of
more...
The Financial Consultant s Role on Your Construction Projects and Capital Investments
...-dollar capital project involving design, engineering and construction and you want to make sure the project is delivered within your budget, you will want to attend this teleconference. Many companies start large construction projects and do not know what the estimated payback will be in terms of increased revenue, income and enhancing enterprise value. This teleconference will introduce you
more...
Risk Transfer Provisions: The Hidden Traps in Construction Agreements
...k Transfer Issues in Contracting - Tucked away in today s construction agreements is a number of risk shifting provisions. All too often, one or more parties in a construction project do not appreciate the significance of these provisions. These provisions can effectively transfer millions of dollars of risk, and the party accepting that risk must properly understand the implications of these
more...
Planning for Renovation Projects
...construction costs skyrocket, renovation of existing buildings become an attractive alternate. Besides cost savings, recycling buildings is becoming a green choice to facility development. The available national standards for renovation of existing buildings is peaking and solidifying the standard approach to existing building renovations. This teleconference will help people responsible for
more...
Construction Litigation
...construction litigation nightmares in their tracks get on the right track from the start.
Successfully completing a construction project requires careful planning, execution and diligence at every stage. But even the most well-planned projects inevitably encounter problems and conflicts. The abilities of the owner, contractors, architect and engineers to foresee and respond to these pitfalls
more...
Top 9 Issues in Insurance Coverage
...stay abreast of the latest issues relating to coverage of construction defect claims. Our seasoned professionals will provide practical answers to your most pressing questions about bad faith. You ll get an inside look at how to respond to confusing issues surrounding assignment of insurance policies and coverage of environmental claims.
Take advantage of this opportunity to make sure you
more...
From Wintrac Inc.
Fast Track to Java 5 - Java 6 and OO Development Using Rational Application Developer (RAD)
... developers is a new way of approaching system design and construction.
In addition to teaching you everything you need to become productive in basic Java programming, this course draws on our extensive experience to provide a solid understanding of the core OO and Java concepts and practices needed to create well designed Java programs. It covers all the key OO capabilities and how to use
more...
Gentle Java and OO Development Using Rational Application Developer (RAD)
... developers is a new way of approaching system design and construction.
This course covers the core OO and Java concepts that developers need to use the Java programming language to create well designed Java programs. It focuses on key OO capabilities and how to use them in Java. This includes material on creating well designed Java classes, using encapsulation, building more complex
more...
Fast Track to Java 5 Java 6 and OO Development
... developers is a new way of approaching system design and construction.
In addition to teaching you everything you need to become productive in basic Java programming, this course draws on our extensive experience to provide a solid understanding of the core OO and Java concepts and practices needed to create well designed Java programs. It covers all the key OO capabilities and how to use
more...
Intro to Java and OO Development
... developers is a new way of approaching system design and construction.
This course covers the core OO and Java concepts that developers need to use the Java programming language to create well designed Java programs. It focuses on key OO capabilities and how to use them in Java. This includes material on creating well designed Java classes, using encapsulation, building more complex
more...
Revit Structure 2009 Fundamentals
... the concepts and principles from building design through construction documentation using Revit Structure 2009. Our training guide is intended to introduce students to the softwarea s user interface and the basic building components that make Revit a powerful and flexible structural modeling tool.
Our goal is to familiarize you with the tools necessary to create, document, and print
more...
Revit Structure 2010 Fundamentals
... the concepts and principles from building design through construction documentation using Revit Structure 2010. This training guide is intended to introduce students to the softwarea s user interface and the basic building components that make Revit a powerful and flexible structural modeling tool.
Our goal is to familiarize you with the tools necessary to create, document, and print
more...
Revit Architecture 2009 Fundamentals
...m Preliminary Design through Design Development, and into Construction Documents, the program streamlines the design process with a central 3D model.
The objective of the Revit Architecture 2009 Fundamentals course is to enable students to create full 3D architectural project models and set them up in working drawings. Most of the course is focused on Design Development tools - building the
more...
Revit Architecture 2009 Intermediate
...rtain walls, and site and structural design) and Advanced Construction Documents (including detailing, schedules, keynotes and advanced view setup).
The objective of the Revit Architecture 2009 Intermediate training guide is to enable students who have a basic knowledge of Revit to increase their productivity through additional collaboration tools, advanced design development tools, and
more...
Revit Architecture 2010 Fundamentals
...m Preliminary Design through Design Development, and into Construction Documents, the program streamlines the design process with a central 3D model. Changes made in one view update across all views and on the printable sheets. The name a Revita implies this ease of revision that is at the heart of the software.
Since building projects themselves tend to be extremely complex, Revit
more...
Revit Architecture 2010 Intermediate
...m Preliminary Design through Design Development, and into Construction Documents, the program streamlines the design process with a central 3D model. Changes made in one view update across all views and on the printable sheets. The name a Revita implies this ease of revision that is at the heart of the software.
Since building projects themselves tend to be extremely complex, Revit
more...
Revit Architecture 2011 Fundamentals
...m Preliminary Design through Design Development, and into Construction Documents, the program streamlines the design process with a central 3D model. Changes made in one view update across all views and on the printable sheets.
This training guide is designed to teach you the Revit functionality as you would work with it in the design process. Begin by learning about the user interface and
more...
Revit Architecture 2011 BIM Management
...hare design data with team members throughout the design, construction, and management phases of a buildinga s life. A key component in managing the BIM process is to establish a company foundation for different types of projects by creating standard templates and custom elements. Having this in place makes the process of any new project flow smoothly and efficiently.
The objective of
more...
AutoCAD Architecture 2008 Advanced
...e 2008 Fundamentals focuses on the design development and construction documentation features of AutoCAD Architecturea the basic tools that the majority of students will need in their work. AutoCAD Architecture 2008 Advanced focuses on conceptual design in the sense of massing studies and space planning as well as several more advanced features for greater control over the program. This course
more...
AutoCAD Architecture 2008 Fundamentals
...e 2008 Fundamentals focuses on the design development and construction documentation features of AutoCAD Architecturea the basic tools that the majority of students will need in their work. AutoCAD Architecture 2008 Advanced focuses on conceptual design in the sense of massing studies and space planning, as well as several more advanced features for greater control over the program.
more...
Autodesk Navisworks 2011 Essentials
The Autodesk ® NavisWorks ® 2011 Essentials course instructs students in best approaches to combine 3D geometry from cross disciplines into one scene to enable effective model reviews. Through a hands-on, practice-intensive curriculum, students acquire the knowledge needed to review and markup the model, use TimeLiner, Animator, Scripter, and Presenter, as well as the Clash Detective tools
more...
AutoCAD - AutoCAD LT 2011 Fundamentals
The objective of AutoCAD/ AutoCAD LT 2011 Fundamentals is to enable students to create a basic 2D drawing in AutoCAD. All topics, including features and commands, relate both to AutoCAD and AutoCAD LT unless specifically noted otherwise in the courseware. To make the process easier and provide flexibility for instructors and students, the course is divided into two parts that can be taken
more...
AutoCAD Architecture 2010 Advanced
...e 2010 Fundamentals focuses on the design development and construction documentation features of AutoCAD Architecturea the basic tools that the majority of students will need in their work. AutoCAD Architecture 2010 Advanced focuses on conceptual design in the sense of massing studies and space planning, as well as several more advanced features for greater control over the program.
You can
more...
AutoCAD Architecture 2010 Fundamentals
AutoCAD Architecture is a AutoCAD optimized for architecture.a In addition to all the standard AutoCAD tools, it offers a host of features to greatly increase the speed and efficiency of architectural drawings. The software is designed to work from first concept (conceptual design or mass model) all the way through to design development, working drawings, and facility maintenance.
AutoCAD
more...
AutoCAD Architecture 2009 Fundamentals
...9 Fundamentals concentrates on the design development and construction documentation features within AutoCAD Architecture 2009. Users are exposed to the tools required to create a basic floor plan and specialty objects such as column and ceiling grids, stairs, and roofs. The training guide also introduces drawing management through the Project Navigator.
You can get a complete list of other
more...
COMPLETE WPF
Windows Presentation Foundation (WPF) is a GUI toolkit introduced with .NET 3. 0. This course will examine this new programming API beginning with the topics of XAML, code files and WPF development tools. Attendees will learn about the WPF control programming model, styles and control templates, data binding, graphical rendering services and the construction of navigationally-based applications.
more...
From L'Obel IT-Palaestra
L'Obel Certified PG Diploma in BioInformatics Training in Bangalore





...e comparisons & associated technologies
a Principles, construction & applications of Microarray technology including GEO database & problems associated with microarray image analysis
a Expressed Sequence Tags (ESTs) a Detailed account, dbEST, Applications
a Single nucleotide polymorphisms (SNPs) - Detailed account, dbSNP, Applications
a Pharmacogenomics
a Transcriptomics a
more...
L'Obel Certified Informatica Training
L'Obel Certified Informatica Training
L'Obela s Informatica course will help you acquire advanced skills for becoming a skilled Data Warehouse Specialist.
Internship Options
L'Obel ITP is unique in its training and delivery methodology as it is the first in India to provide the participant Hi-End technology training followed by rigorous INTERNSHIP in its SOFTWARE DEVELOPMENT CENTER. This
more...
From Petra Hypnosis
Mentorship Program or Supervised Practice Program



...imdhamastertrainer. com or the new website which is under construction. The information will be duly transmitted to all graduates concerned.
The Centre will be closed on public holidays, so there wona t be any program if it happens to fall on a Monday that is a public holiday. No replacement session will be arranged unless unanimously requested by members.
Affiliates can use their
more...
From Meirc Training and Consulting
Cost Management Fundamentals and Techniques - Dubai




By the end of the program, participants will be able to:
Learn the importance of analyzing and managing costs.
Understand Activity-Based Management ABM.
Appreciate the importance of process costing and cost allocation.
Develop important tools for planning and decision making.
Evaluate and manage performance through strategic cost management.
more...
Managing Project Teams - Contracts and Projects




...ltaneously managed by a project manager.
Demonstrate the construction of project logic models.
Describe the resources that may be required for the successful completion of a project.
Practice general management skills needed to get the best team and lead them through a successful project.
Get the right message at the right time through planning and careful tracking of stakeholder
more...
Managing Project Teams - Project Management
By the end of the program, participants will be able to: Understand how organizational structures influence projects. Develop an understanding of the various project relationships. Demonstrate the construction of project logic models. Practice general management and leadership skills. Get the right message at the right time through planning and careful tracking of stakeholder communications on the
more...
Maintenance Management for Buildings & Facilities



Objectives:
By the end of the program, participants will be able to:
Understand how to manage effectively building and facilities maintenance.
Structure a cost saving project and determine the required changes.
Set up a work order system, PM procedures and task lists.
Estimate custodial work, conduct craft training and increase the motivation of maintenance staff.
more...
From The Project Solvers of America, Inc
PMP Exam Prep - Thursdays




Project Solvers is now partnering with Crosswind, an ISO 9001 certified Registered Education Provider, to provide you with a phenomenal boot camp experience.
Prepare for your PMP exam in four weeks by taking our bootcamp on four consecutive Thursdays. No need to take vacation from work!
Experience four days of intensive project management training with the most complete set of PMP ® exam
more...
From Contacts Plus
Advanced Writing Skills
...ur writing clear, concise, and correct.
Improve sentence construction and paragraph development.
Identify some ways to make your writer simpler and easier to read.
Learn about a tool that can determine how readable your work is.
Develop effective business letters for tough situations.
Discuss e-mail etiquette.
Develop an appropriate writing style and format for your letters, business
more...
Project Management Fundamentals
...am Overview:
Project management isna t just for construction engineers and military logistics experts anymore. Today, in addition to the regular duties of your job, you are often expected to take on extra assignments - and to get that additional job done well, done under budget, and done on time. This workshop is not intended to take you from a supervisory or administrative position
more...
Understanding Project Management
...am Overview:
Project management isna t just for construction engineers and military logistics experts anymore. Today, in addition to the regular duties of your job, you are often expected to take on extra assignments - and to get that additional job done well, done under budget, and done on time. This workshop is not intended to take you from a supervisory or administrative position
more...
From Statistics & Analytics Consultants Group
Research and Statistics Training Courses
...ate Statistical Modeling for Marketing
Survey Design and Construction
Introduction to SPSS to Intermediate
Intermediate SPSS Syntax Programming
Our courses are offered in three formats a resident course at our office, a corporate course on location of the company or a location of their choosing, and remote (online) courses.
Resident Course:
Date: This course is run twice a month
more...
From Kepner-Tregoe Inc
Problem Solving and Decision Making



Kepner-Tregoe Problem Solving and Decision Making (PSDM) is a step-by-step process that helps people rapidly and accurately resolve a wide range of business issues. Used in organizations worldwide, PSDM helps people at all levels in an organization efficiently organize and analyze information and take appropriate action. PSDM helps people tap into the know-how of individuals, develop consensus,
more...
From SETTEC
OSHA Construction Industrial

Technical demonstration to conduct general industry out reach training in accordance with guidelines provided by the Occupation Safety and Health Administration (OSHA).
more...
Construction Contracts FIDIC

...s, the consequent demand of management development in the construction industry rapidly enlarges. The Construction industry in Egypt consequently is in crucial need to cope with the global trends, changes and fierce competition.
Due to open Market strategy of the GAT, new types of Partnerships and alliances in every business field have evolved. Especially in construction which as a
more...
Contracts Dispute Settlement ADR and Arbitration

The evolving international Partnering and Alliances combination in construction industry and its ever-changing Construction product have induced huge Change Orders and claims, as a consequent the crucial need for various types of dispute resolution
more...
From WWP Training Ltd
Microsoft Access 2003 Foundation
Aims
This course is aimed at people who want to learn how to build a Microsoft Access database or to gain essential understanding of the construction and use of an existing database.
Prerequisites
Students who wish to attend this course need to be familiar with the use of a PC, keyboard and mouse. No previous experience of Access is required.
more...
Microsoft Access 2007 Foundation
Aims
This course is aimed at people who want to learn how to build a Microsoft Access database or to gain essential understanding of the construction and use of an existing database.
Prerequisites
Students who wish to attend this course need to be familiar with the use of a PC, keyboard and mouse. No previous experience of Access is required.
more...
From World Class Productivity Inc
Project Management Essentials Part 2 Project Monitoring and Control
This 3-day course is designed as a follow-up to our flagship 3-day Project Management Essentials (PME) workshop. While the PME course focuses primarily on ensuring we have a realistic project plan, this course focuses on the execution, monitoring and control, and project completion aspects of project management.
Using group discussions, realistic project scenarios and exercise simulations,
more...
Project Management Essentials for Construction
...construction projects, this 3-day project management course is built on the foundation of our standard Project Management Essentials course a course which has consistently remained one of the most sought after and trusted fundamental level project management courses in Canada for over 15 years. The Project Management Essentials for Construction (PME for Construction) course provides the
more...
From JCS Computer
Crystal Reports for Peachtree Training Class - Florida 800-475-1047





Crystal Reports for Peachtree Training Class - Florida
Crystal Reports for Peachtree Training Class Holiday, Florida 800/ 475-1047 www. jcscomputer. com Crystal Reports Software Support, online training and custom report design and creation also available for all versions of Peachtree and Peachtree Quantum.
Welcome to Crystal Reports for Peachtree Training classes. Training is an integral
more...
Crystal Reports for Peachtree Training Class - Kansas 800-475-1047





Crystal Reports for Peachtree Training Class - Kansas
Crystal Reports for Peachtree Training Class Kansas City, Kansas 800/ 475-1047 www. jcscomputer. com Crystal Reports Software Support, online training and custom report design and creation also available for all versions of Peachtree and Peachtree Quantum.
Welcome to Crystal Reports for Peachtree Training classes. Training is an integral
more...
Crystal Reports for Peachtree Training Class - Michigan 248-540-4552






Crystal Reports for Peachtree Training Class Southfield, Michigan 248/ 540-4552 www. jcscomputer. com Crystal Reports Software Support, online training and custom report design and creation also available for all versions of Peachtree and Peachtree Quantum.
Welcome to Crystal Reports for Peachtree Training classes. Training is an integral part of any successful software investment. This
more...
Crystal Reports for Peachtree Training Class - Missouri 314-644-4100





Crystal Reports for Peachtree Training Class Southfield, Missouri 314/ 644-4100 www. jcscomputer. com Crystal Reports Software Support, online training and custom report design and creation also available for all versions of Peachtree and Peachtree Quantum.
Welcome to Crystal Reports for Peachtree Training classes. Training is an integral part of any successful software investment. This
more...
From Technical Training Solutions
HTML XHTML CSS (Introduction)





...n detail, best practices and standards for web page/ site construction.
As HTML has evolved over the years, it is now essential that web page developers know and understand how XML is now used in conjunction with HTML to form XHTML as well as how the Cascading Style Sheet (CSS) language is used to augment and enhance what is possible in a web page. This course introduces these concepts and
more...
From Key Consulting
Using Microsoft Project to Plan and Control your Projects (Levels 1 & 2)


...plied, and enjoyable. By guiding participants through the construction and use of both sample and actual projects (from your workplace), we have found our training to be both productive, and well received.
Who should take this course?
This course is for anyone who intends to be involved in planning and/ or controlling projects using Microsoft Project.
Course cost may vary by
more...
From The Environmental Academy
Site Waste Management Planning and Implementation Level 3 NCFE





...Environmental Academy has a strong reputation for helping construction businesses manage their environmental performance and improve site e ciency. This led to DEFRA appointing consultants from the Academy to run a pilot study and develop training material to assist the construction industry in complying with the requirements of Site Waste Management Plans (SWMP).
This course aims to
more...
Site Waste Management Plan Awareness Level 2 NCFE


...Environmental Academy has a strong reputation for helping construction businesses manage their environmental performance and improve site e ciency. This led to DEFRA appointing consultants from the Academy to run a pilot study and develop training material to assist the construction industry in complying with the requirements of Site Waste Management Plans (SWMP).
This one day course is
more...
Higher Programme in Business Efficiency for Environmental Sustainability



The Environmental Academy has developed a new Higher Programme in Business Efficiency for Environmental Sustainability.
This training programme is designed for individuals at supervisory level or above (e. g. Environmental champions/ supervisors/ Managers/ Directors).
Completion of all 5 specialist workshops leads to an Environmental Academy certificate in Business Efficiency for
more...
From Global Technical Training - South Africa
Plant degradation mechanism for aging plants an essential skill for Risk Base Inspection

As operating pressure plants age, premature leaks or rupture are increasingly likely. Mechanisms such as corrosion, creep, fatigue, the possibility of cracks emanating from damaged areas could lead to dramatic consequences.
It is fundamental to understand degradation mechanisms, their likelihood of occurring in the facility and the impact that they may have on the facility.
This intensive
more...
From Evans Analytics
Constructing Surveys
Surveys find out information that can be a useful research tools only if they are well-constructed, meaning that they are designed to find out as accurately as possible what the surveyor wants to know. Most surveys are not constructed properly. Out class will teach the proper ways to construct survey so you are actually getting the information you want.
more...
Research Statistics and Analytics Training Courses






...te Statistical Modeling for Marketing
Survey Design and Construction
Introduction to SPSS to Intermediate
Intermediate SPSS Syntax Programming
Introduction to Text Mining & Analytics
Our courses are offered in three formats a resident course at our office, a corporate course on location of the company or a location of their choosing, and remote (online) courses.
Resident
more...
From Publimaks International
Advanced Project Management Training in Dubai




The Advanced Project Management Course is an intensive 10 daysa program and is designed for project and related executives who wish to broaden, sharpen and deepen their project management competencies. This course integrates the latest proven project management concepts and practices to give participants a firm grounding in the advanced skills and knowledge required to successfully manage
more...
From Cosensa Learning & Development Ltd
Asbestos Management
...ands of tonnes of asbestos products were used in building construction in the past and much of it is still in place. Carpenters, electricians, plumbers and others doing maintenance or refurbishment works may be at risk where asbestos products are disturbed. If you own or are responsible for the management of a workplace, whether a factory, warehouse or office which may contain asbestos
more...
Construction Design and Management Regulations 2007
...Construction (Design and Management) Regulations 2007 [CDM 2007] came into force April 1, 2007, replacing both the CDM Regulations 1994 and also the Construction (Health, Safety and Welfare) Regulations 1996.
Key aims of CDM 2007 are to integrate health and safety throughout the design and management of a construction project and to discourage the unnecessary bureaucracy which dogged CDM
more...
Managing Contractors
Course Objectives:
It is a common misconception that when contractors work at your site, you have no management control over their activities. This is not the case. Health & safety law requires the client organisation to have some responsibility for contractor's activities. Should an accident ever occur at your premises involving a contractor, then questions will be asked of you, the contractor
more...
Manual Handling
...every workplace, whether an office, warehouse, factory or construction site. The Manual Handling Operations Regulations place responsibilities on employers to reduce injuries from manual handling and to conduct an assessment of handling operations that cannot be avoided. This seminar workshop looks at practical ways to meet these requirements.
Contents:
Overview of the Regulations
more...
Working at Height Regulations
Course Objectives:
This half-day programme provides delegates with advice and guidance regarding the selection, use, and maintenance of specific plant or equipment used in activities involving work at height.
Contents:
Legislation overview
The Health and Safety at Work etc Act 1974
The Management of Health & Safety at Work Regulations 1999
The Provision and Use of Work Equipment
more...
From Publimaks International
Training Course in Dubai - Effective Project Management
In this 5 days' Effective Project Management Training program participants will learn how to run a project according to the standards published in the Project Management Institute's Project Management Body of Knowledge (PM-BOK).
more...
From EMLab P&K
Infection Control Risk Assessment Course
The Linders Health Institute will be presenting a two-day course introducing and reviewing infection control in medical facilities as it applies to the healthcare construction, HVAC, remediation and Indoor Air Quality professionals.
Recommended for: Industrial Hygienists, IAQ professionals, Environmental consultants, Infection Control Risk Managers, Registered Nurses, Facility Managers,
more...
From Rutgers Office of Continuing Professional Education
Rutgers' Radon Mitigation Technician Course
After completing the two-day Radon Measurement Proficiency course, you can begin your move into the field of Radon Mitigation with this three-day course. In this course, youa ll learn how to diagnose and then correct radon problems in the home. This course also explains radon mitigation structures in new construction as well as the special issues of radon in water and safety precautions for
more...
Rutgers 3-Week Golf Turf Management Course
Coming to New Jersey for Rutgers 3-Week Professional Golf Turf Management program is a big decision, but one that can greatly boost your career!
Our intensive program gives you all the essentials of turf, plants, soil, irrigation and construction as well as topics to help build your management and leadership skills.
more...
Rutgers' 2-Year Professional Golf Turf Managment


... all the essentials of turf, plants, soil, irrigation and construction as well as topics to help build your management and leadership skills. It is all turf all the time, so as a graduate you will walk away with all of the skills you need to work in the industry a and not waste time with US History or Psychology 101. The content of Rutgersa nationally-recognized program is ruthlessly
more...
From Optivation
Business Grammar for Those Who Believe They Cant Write


Business Grammar for Those Who Believe They Cana t Write
Fee: $200
Dates: 02/ 08/ 2010-02/ 27/ 2010
Instructor: Rick Demers
This course will remind the business writer of the most usable business punctuation and the most common errors in business writing. It will introduce a formula for understanding sentence construction, share proof reading tips and strategies, review the most common
more...
From Asktenali.com
Soft skills training for the Construction Industry
Asktenali. com - HRD Trainers and Consultants A premier training organization offers training solutions for corporate organizations. The HR Training Division has expertise in all spheres and is providing HR Training solutions to a number of Global and Indian organizations especially on soft skills and development of leadership qualities. Asktenali. com is your perfect choice for your training
more...
From Global Innovative Campus
Total Building Commissioning Process
...ent agencies now require the commissioning process on new construction and renovation projects.
Owners of institutional, commercial, and industrial buildings and large multi-unit residential buildings must use proven quality management tools and process systems that match their needs, meet their budgets and schedules, and reduce operating problems in new and renovated buildings or plants. In
more...
Hydrostatic and Pneumatic Testing of a Piping System with Vessels to ASME B313 Code 3 PDHs
...ant prior to initial operation. It is usually done by the construction companies. The pressure testing is often under the control of Engineers, Technicians and personnel from Quality and Safety who, although qualified in their own discipline, may not have received formal Mechanical Engineering training. To be effective, Engineers, Technicians and personnel of all disciplines should have a
more...
Power Generation - Gas Turbines Co-Generation and Combined Cycle Plants Wind Power Generation and Solar Power
...ombined cycle and co-generation plants due to their short construction lead-time and low capital investment.
Combined cycle plants have a 4 -5 year pay back period because of low staffing requirements and low operating and maintenance costs. They also have the advantage of long-term fuel price stability, fuel flexibility and low emissions. These plants can be located close to the power-user
more...
Simplified ASME B313 Process Piping with emphasis on Piping Stress and Materials
Description
Interpreting and understanding the ASME B31. 3 Process Piping Code was never easy. Ita s a design code that requires long years of engineering and design experience to fully understand the requirement of the code. A process plant is predominantly made up of piping. Anyone whose work is related to a process plant needs some basic understanding of the piping designs and
more...
Embankment Design Construction Slope Stability Settlement Analysis and Seepage Control Workshop
...sive overview of the principles and techniques of design, construction and inspection of earthworks with special focus on earthen embankment. Some of the issues that will be addressed through a presentation and a discussion with an expert practitioner are site development, soil properties, estimating, excavation, placing and compacting, and the legal and environmental considerations that bear
more...
Construction Planning and Scheduling
... control from basic project management principles and pre-construction planning through scheduling using network diagrams and monitoring and controlling.
The course is taught on the basis of a case methoda comprised of lectures and group question and answer periods.
Subject to availability of hardware and software, this course will also include a hands ona learning experiences with
more...
Contractor Consultant - A Successful Selecting Strategy
...construction projects depend on the efficiency and skills of consultants and contractors. Following proper procedures in their evaluation and selection enhances the probability of achieving high quality and keeping projects within budget. Also, design/ build and build/ operate/ transfer (BOT) projects require different method to ensure construction in time and budget and according to
more...
Construction Contract Claims Avoidance and Resolution
Description
The objective of this presentation is to demonstrate that problem free (minimal) project delivery is possible through real example and a review of project management techniques. In reviewing Public Works statistics vis a vis the effort in time and money to defend against claims it is certainly more prudent to put the effort into contract administration as a preventative effort
more...
Requirement of Materials by Piping Code ASME B313 Chapter III
...construction include fluid service requirements, which affect selection and application of materials. The code sets limitations and qualification of materials based on their inherent properties.
The selection of materials is often set by and under the control of Engineers and personnel from Quality who, although qualified in their own discipline, may not have received formal Material or
more...
Flexible and Rigid Retaining Wall Systems Design Workshop
... participants with state-of-the-practice design tools and construction techniques to expand implementation of safe and cost-effective earth retention technologies. This course addresses the selection, design, construction, and performance of earth retaining structures used for support of earth fills and excavations or cut slopes. The instructor covers factors that affect wall selection. Class
more...
Urban Drainage Design Workshop
...s on the practical application of sound planning, design, construction and maintenance practices for highway drainage systems. The designed components include storm water facilities design, open channels and culverts. An understanding of the hydrological and hydraulic principles that underlie practical design will also be developed. Hands on working examples will be presented to demonstrate in
more...
Fundamentals of Hot Mix Asphalt HMA Mixtures
...lt (HMA) is the main civil engineering material in paving construction. More than 90% of roads and highways in North America are paved with HMA; therefore, many civil engineers work in the design, production, and construction of HMA. A successful design, production, and construction of HMA need significant knowledge, experience, and engineering judgement.
During the last decade, several
more...
Transportation Planning Four-Step Travel Demand Modeling
Description
A travel demand analysis consists of assessing four components of the travel pattern for a study area: i) trip generation (TG) or where trips are coming from; ii) trip distribution (TD) or where trips are going to; iii) modal split (MS) or the shares among available modes for the flow between origin-destination (O-D) pairs; and, iv) network assignment (NA) or the route choice within
more...
Flexible Pavement Design and Rehabilitation Workshop
... of our ground transportation systems and higher costs of construction, maintenance and rehabilitations of pavements, highway agencies are facing challenges to keep serviceability of their pavements to an acceptable level. During the last two decades, the issue of proper design, high quality construction as well as optimum maintenance and rehabilitation of pavements have been the focus of
more...
Flexible Pavement Design and Rehabilitation Workshop
... of our ground transportation systems and higher costs of construction, maintenance and rehabilitations of pavements, highway agencies are facing challenges to keep serviceability of their pavements to an acceptable level. During the last two decades, the issue of proper design, high quality construction as well as optimum maintenance and rehabilitation of pavements have been the focus of
more...
Mechanical Engineering for Non-Mechanical Engineers in a Process Plant
...iples that dictate the requirement of plant design by the Construction Code. This course is designed to give an insight to the plant piping with reference to Code ASME B31. 3 a Process Piping and an overall concept of major mechanical equipments used in a typical process plant.
This 3 days course is designed to meet the needs of Engineers, Technicians and personnel of all disciplines
more...
LRFD - Bridge Substructure Design Workshop
...infrastructure. The conception, development and worldwide construction of bridges represents the most interesting and important achievements in civil engineering. Their safe, efficient and economic operation requires that the bridges be designed and constructed so they can be operational with routine maintenance for an extended design life.
This course discusses bridge substructure systems,
more...
Wastewater Collection System Design and Construction Workshop
...treatment and disposal.
The various stages of design and construction of sanitary sewer pro jects require an understanding of the objectives of each stage of the project and of the responsibilities and interests of the parties involved.
This 2-day workshop is intended for those who require better understanding of sanitary sewer drainage systems design. The participant will be expected to
more...
Piled Foundations Design
...ications, functions and pros and cons of piles design and construction.
This course provides participants with specific technical guidance on aspects of designing, installing, and the construction of piled foundations.
The course addresses subsurface investigation, pile selection, economic analysis, static design analysis (single pile and pile group behavior under compression, tension and
more...
Soils Engineering For Practical Applications
Description
The Soils Engineering for Practical Applications Workshop is a basic geotechnical course which will provide practical knowledge for both generalists and those needs to upgrade their knowledge in geotechnical design field. Each theoretical concept presented will be linked to practical applications in the geotechnical engineering area.
The purpose of this workshop is to familiarize
more...
Power Generation - Gas Turbines, Co-Generation, and Combined Cycle Plants, Wind Power Generation, and Solar Power
...ombined cycle and co-generation plants due to their short construction lead-time and low capital investment.
Combined cycle plants have a 4 -5 year pay back period because of low staffing requirements and low operating and maintenance costs. They also have the advantage of long-term fuel price stability, fuel flexibility and low emissions. These plants can be located close to the power-user
more...
Design Construction and Rehabilitation of Culverts and Channels
...s on the practical application of sound planning, design, construction and maintenance practices for open channels and culverts. Culverts rehabilitation will also be introduced with the state-of-the-practice tools. An understanding of the hydrological and hydraulic principles that underlie practical design will also be developed. Case studies will be presented to demonstrate in very practical
more...
Earthworks Design Construction Inspection
...sive overview of the principles and techniques of design, construction and inspection of earthworks. Issues that you will address through presentations by and discussion with an expert practitioner are site development, soil properties, estimating, excavation, placing and compacting, and the legal and environmental considerations that bear on this type of construction. There will also be an
more...
From Security Cameras PLUS
CCTV Networking Training Course
...suring that equipment and information are on site to meet construction schedules and deadlines. This role will provide hands on technical and administrative direction. Demonstrate the understanding of Cat 5, 6 and fiber optics. Be able to successfully pass a drug test, MVR, and criminal history check. Applicants must beable to demonstrate proper use of all hand and power tools and equipment
more...
From Global Innovative Campus
ESL - English for Engineers Technicians and Technologists 40 Hrs
Daily Schedule:
9: 00am - Session begins
1: 00pm - Adjournment
Description:
This course is designed to facilitate English as a Second Language for internationally educated professionals. It consists of four levels in order to best meet each students needs. Furthermore, the course consists of two distinct functions. Firstly, to develop English skills necessary to function in daily life in
more...
Fundamentals of Project Management - Evening Class 12 CEUs
...oject engineer.
Mohamed obtained his Masters degree in Construction Management specialization with the American University in Cairo (AUC), and his Ph. D. in Construction Engineering and Management specialization with the University of Alberta. His field of specialization is Project Modeling, Planning and Control. Mohamed also has more than ten years of project management teaching experience.
more...
PMP CAPM Exam Preparation 4th Edition - Evening Class 385 PDUs
...ial.
Target Audience
Engineers, project managers, construction managers, general contractors, trade contractors, construction superintendents, construction inspectors, officials of government agencies and other individuals who are interested in learning the PMI approach in managing projects.
This program is designed to prepare new and intermediate project managers and project team
more...
Resolving Conflict in the Construction Project Environment 18 CEUs
... breaks and lunch are provided daily.
Description
The construction project environment is inherently adversarial. It is not uncommon for disputes and disagreements to escalate into serious conflict. This conflict can be phenomenally expensive, both financially and personally. Delays in resolution, the financial costs of using the legal system and the added expenses of document management
more...
HVAC Control Systems Design Implementation Commissioning and Operation 18 CEUs
Daily Schedule:
8: 00am - Registration and coffee (1st day only)
8: 30am - Session begins
5: 00pm - Adjournment
Breakfast, two refreshment breaks and lunch are provided daily
DESCRIPTION
A control system is at the heart of every buildinga s energy use and its Indoor Air Quality. From standalone packaged pump controllers to sophisticated Building Automation Systems, the
more...
AutoCAD for Beginners - Drawing and Modeling 24 PDH
...ewports
Coordinate Entry
Locating Points with Tracking
Construction Lines
Placing Reference Points
External Referencing (XREF)
Printing Concepts and Layouts
Printing or Plotting Drawings
Lesson 10: Text and Hatching
Working with Annotations
Text Styles and Commands
Editing Multiline Text
Creating Multileader Styles
Hatching Definition and Commands
Hatching Styles
Project 4:
more...
PMP Exam Preparation 4th Edition - Daytime Class 42 PDUs
...ial.
Target Audience
Engineers, project managers, construction managers, general contractors, trade contractors, construction superintendents, construction inspectors, officials of government agencies and other individuals who are interested in learning the PMI approach in managing projects.
This program is designed to prepare new and intermediate project managers and project team
more...
Geotechnical Design Refresher Workshop
...o design deep and shallow foundations and supervise their construction. The course philosophy is to provide the participants with the information they need to design state-of-the-art foundations.
The information is supplied in a simple and systematic way, discussing topics where current knowledge is lacking and more understanding is needed. With the instructora s long experience in design,
more...
Instrumentation Monitoring Condition Assessment for Engineers
...our of structures and equipments is becoming part of many construction projects. Additionally non-destructive testing and evaluation (NDT, NDE) of many in service structures is increasing representing a larger share of the engineering business. Nevertheless, few universities offer a course on instrumentation as part of their engineering curriculum; so many engineers learn instrumentation
more...
Foundation Design
Description
This course deals with all aspects of modern good practice in foundation design. These include: the importance of both the geological and geotechnical aspects of the ground conditions, current limit analysis methods for bearing capacity, and definition of factors of safety. The various settlement analyses and their underlying assumptions and reliability are discussed, together with
more...
Flexible and Rigid Retaining Wall Systems Design Workshop
...
To present an in-depth review of design, application and construction of flexible and rigid retaining walls systems.
Description:
The goal of this course is to provide participants with state-of-the-practice design tools and construction techniques to expand implementation of safe and cost-effective earth retention technologies. This course addresses the selection, design, construction,
more...
From SUKAD Fz-llc
Project Management for Capital Investment Projects




Course Objectives:
- To gain an understanding of the SUKADa model.
- To understand the project life span including all stages and gates.
- To apply the concepts on an engineering & construction project.
- To work in a team and take the lead for tasks when appropriate.
- To understand how to customize and adapt the methodology to engineering and construction projects (clientsa
more...
From Technology Ed
Pharmaceutical Validation Processes

Course Description
This course provides a basic understanding of the validation process as required by the Food and Drug Administration of the United States for drugs manufactured in the United States and all imported drugs. This course also reviews applicable definitions and descriptions of the process and documents required in the validation of a facility. The process of validation is
more...
From Entourage Arts
SketchUp Training Advanced 2




Register for One half day (3. 5 hours) Module or All Four:
Day 1: Essentials 1 & 2
Day 2 Advanced 1 & 2
Hands on Training at a convenient computer lab with PCs.
Mac Users may bring their own Laptop and receive Mac specific instruction.
Max class size of 10! in Rental Computer Labs across Canada, Maximum of 6 in our Home Facility in Toronto/ Vaughan.
Google SketchUp
more...
From Last Minute Training
Fundamentals of Hot Mix Asphalt Mixtures 12 CEUs
Hot Mix Asphalt (HMA) is the main civil engineering material in paving construction. More than 90% of roads & highways in North America are paved with HMA; therefore, many civil engineers work in the design, production & construction of HMA.
more...
Embankment Design Construction Slope Stability Settlement Analysis and Seepage Control Workshop 18 CEUs
This workshop will present some of the new techniques acquired in: material properties, mechanisms of behaviour, methods of analysis & in the problems & effects of embankment & earth works placement. the focus will be placed on those problems that have..
more...
Bridge Substructure Design Construction and Rehabilitation Workshop 18 CEUs
This course discusses bridge substructure systems, highlights the more technical aspects of bridge substructure design & rehabilitation. Focusing on components comprising & affecting bridge substructures, this course addresses the various types of each..
more...
Total Building Commissioning Recommissioning and Retro-commissioning Process
In this course you consider the primary goals of the building commissioning process for new construction, but also exploring the activities & roles of recommissioning for existing buildings that had already been commissioned, retro-commissioning for...
more...
From Termark Technical Institute
NICET R Fire Alarm Technician - Level II -Certification Exam Prep Course
This tree day action packed course covers Fire Protection Plans and Symbols, Basics of System Layouts, Electrical Installation Standards, Basic Fire Alarm Systems, Supervisory Service, Detection Methods, Detector Spacing, Power Supplies, System Acceptance, Periodic Testing, Construction Plans, Specifications and Cost Estimates of a mock job, Building Codes, Contracts, Governmental Agencies, OSHA
more...
From Last Minute Training
Total Building Commissioning Process
In this course you consider the primary goals of the building commissioning process: reduced building and process construction cost as well as increased quality and value.
more...
From O'Brien & Company
Build It LEED
...Construction v. 2.2 Workshop
Learn the complete, step-by-step process for managing the construction of LEED projects from preconstruction to final documentation. Designed for construction managers, general contractors, subcontractors, construction companies, and builders, this training will get you and your company ready to implement LEED on your next project,
Topics covered include:
a
more...
LEED AP Credential Maintenance Learning Lite Bite
With the release of LEED v3, professional accreditation requirements have been revolutionized! From continuing education credential maintenance to exam options, change is in the air. Current and prospective LEED APa s are now faced with choices and paths that many have found confusing and unclear.
This seminar will help anyone interested in LEED accreditation understand the implications
more...
From Last Minute Training
Advanced Writting Skills
Location: Ottawa Date: 2008-02-15
List Price: $495 Offered Price: $345.00
Seats Available: 2
Module 0: Introductions
Module 1: Clear, Concise, Complete, Correct
Module 2: Style
Module 3: Sentence and Paragraph Construction
Module 4: Types of Business Letters
Module 5: E-mail
Module 6: Better Business Writing Exercises
Module 7: Review & Evaluations
more...
AutoCad Avanced Training (5 Days)

Location: Toronto Date: 2008-03-10
List Price: $1750 Offered Price: $1400.00
Seats Available: 1
Learn from hundreds of exercises specific advanced AutoCAD skills.
Who Should Take This Course: New AutoCAD users wanting to learn the fundamentals of mechanical drafting using AutoCAD
Course Outline:
Customize the Drawing Environment
Organize Drawings and Apply standards
Control
more...
Asphalt Mix Design
...e performance of high quality materials and sophisticated construction practices is best achieved with a thorough understanding of material properties and asphalt mix design.
An understanding of the considerations for the design and construction of an asphalt pavement and of the factors that influence its deterioration is essential to make technically and economically feasible decisions
more...
Business Writing That Works 2 Days
Business Writing That Works is a two-day course that focuses writing skills. In this course, students will focus on topics such as:
* Why Write
* The Four C's
* Making Words Agree
* Active and Passive Voice
* Setencnes and Sentence Types
* Courtesy in Writing
* Practicial Language
* Inclusive Language
* Sentence Construction
* Punctuation
*
more...
Grounding and Bonding of Electrical Systems 2 Days
There is more that is not understood than what is understood about grounding and bonding of electrical systems. This seminar will emphasize both theory and practice so that you will have a firm foundation of knowledge when you begin your next design or construction project, or when you next encounter problems in your electrical system which must be corrected for safety, operational or power
more...
Builders Liens How to Avoid the Perils and Minimize the Risk
... seminar focuses on processing and monitoring payments on construction projects in the interest of smooth execution.
After Participating In The Course, You Will Be Able To:
* Use strategies learnt in the course to minimize the risk of buildersa liens
* Perform with a better understanding of your legal responsibilities if and when liens arise
* Avail of the strategies
more...
Canadian Electrical Code
...plication of equipment and wiring in all areas of design, construction, maintenance, manufacturing and the use of electricity. This seminar demonstrates accurate interpretations and applications in areas such as wiring systems, grounding and bonding, protection and control, motors, lines and substations, explosion-proof areas, fire alarms and emergency systems. It also highlights key
more...
Construction and Building Envelope Inspection
...construction for conformance with the approved design documents. This course will enable individuals, who are in the inspection and testing field or want to become a special inspector, to understand the nature and the importance of this business.
This course will help you to know and understand the types of inspection and testing involved in a construction project, which for the most part
more...
Heat Exchangers - Design Operation And Performance
Heat exchangers are important and expensive items of equipment that are used in a wide variety of industries. A better understanding of the basic principles of heat transfer and fluid flow and their application to the design and operation of shell and tube heat exchangers as well as compact and air cooled exchangers that you gain from this course will enable you to improve their effectiveness and
more...
Using Standard Form Contracts for Construction and Design Services
By participating in this practical new course, you will learn how to reduce the occurrence of these problems by using a standardized set of contract documents that have been developed by various industry organizations in Canada including the Canadian Construction Documents Committee (CCDC).
Even when new contract documents are written, considerable effort is necessary to ensure that they are
more...
Designing Temporary Structures For Vertical Construction
...construction involves a high risk of serious injuries, deaths and substantial property loss. Clearly the design of such structures is a critical function. In this intensive two-day seminar, you will learn about the essential elements of design and construction of temporary structures. In particular, you will focus on scaffolding, formwork and shoring design, and the failures that can occur
more...
Comprehensive Workshop On Soil Engineering -Fundamentals And Applications
...construction work need an understanding of different soils and how they behave. The depth of the required understanding need not be equal to that of geotechnical engineers who must use rigorous mathematics, extensive experience, theory and research in design. However, to be effective, the non-geotechnical engineers do need a comprehensive understanding of basic concepts to gain confidence in
more...
Interpretation and Enforcement of Construction Contracts for Industrial Plants
...construction contracts in todaya s climate is harder than ever. But it gets worse. Due to downsizing of facility engineering capabilities, it is critical for owners to modify their core competencies to incorporate the skills required for their construction contracts to meet with success. The truth is, with todaya s limited manpower resources, rising commodity prices, and pressures
more...
Planning Construction Equipment and Methods for Reducing Cost of High-Rise Buildings 2 Day
...gh-rise commercial, industrial and institutional building construction projects experience cost over-runs. Proper planning, involving construction method selection, sequencing operations and coordinating specialty trades, as well as selection and management of proper construction equipment for specific construction tasks and monitoring its production can help effect cost savings.
Objective
more...
Introduction To C Acquainting Yourself with Objects
...fied Process
| Rup Overview
Inception
Elaboration
Construction
Transition
About Functional Requirements
About Non-functional Requirements
| Module 2: Creating Classes
| Using Classes
Creating Classes
Class Properties
Object Methods
Constructors
Destructors
Static Data
Performance Overview
| Module 3: Inheritance and Polymorphism
| Inheritance
more...
Effective Construction Office And Field Administration
At this course you will have the opportunity to learn about the roles of others, from the perspective of the owner, consultant and the contractor and to develop your own field observation knowledge and skills.
more...
Bidding Evaluation Negotiation And Contract Award - For Construction Projects
This 2-day course objective is to review, step by step and in chronological order, the activities which comprise this apex of a construction project. This apex is often traumatic.
more...
Successful Construction Projects - From Concept To Completion- EPIC
This course goal is to demonstrate, through real examples & a review of project management techniques, that it is possible to achieve the project objectives & minimize risks & disputes that can cause cost overruns, completion delays & lower quality work.
more...
Above Ground Storage Tanks- EPIC
In this course you'll update your understanding of above ground storage tank technologies constructed in accordance with API standard 650, materials of construction & their performance with various petroleum products, chemicals & hazardous liquids & more.
more...
Design And Construction Of Earthworks
In this intensive 2-day seminar, you will obtain a comprehensive overview of the principles & techniques of the design & construction of earthworks, such as embankments, earth retaining structures, earth dams, shallow foundations, and more
more...
Structural Engineering for Non-Structural Engineers
If you need a better understanding of the design & construction of concrete, steel, wood or masonry building structures, you will find this course particularly helpful.
more...
Professional Business Writing Skills - computer help
In this 2 day course you'll learn: Use the five C's of writing; Ensure their writing meets basic grammatical standards, including word agreement, sentence construction, proper spelling, & punctuation; Write business letters, reports, memos, & e-mails.
more...
Electrical Design Concepts For Non-Electrical Engineers
This course, focused on basic electrical design concepts, is designed to meet today demands for more integration of engineering disciplines in industrial and commercial design, construction and maintenance.
more...
HTMLXHTML Part I
In this course students will learn the fundamentals of Hypertext Markup Language. Topics include the history of HTML/ XHTML, HTML/ XHTML versions and flavours, element construction and document structure.
more...
Total Building Commissioning Recommissioning and Retrocommissioning Process
In this course you consider the primary goals of the building commissioning process for new construction, but also exploring the activities & roles of recommissioning for existing buildings that had already been commissioned, retro-commissioning ....
more...
Residential Building Envelope and Structure Assessment and Repair
This seminar will explore various building designs and construction materials and how the application of the building code structural, health and life safety, and building materials are applied in the repair of multi-unit and single family buildings.
more...
HVAC System Design and Implementation - New and Retrofit
Upon completion you will: use the HVAC system design process; save cost by being familiar with the HVAC system construction process; perform the HVAC system balancing & commissioning process; resolve the problems found during design & implementation.
more...
Interpretation And Enforcement Of Construction Contracts - Epic
This seminar enhances understanding of the many details of multifaceted contract documents and focuses on developing skills for making a balanced and fair interpretation and enforcement which can result in reduced cost to the owner.
more...
Foundations of Construction Law
Actual case examples will be discussed explaining contract performance, how to resolve construction disputes, how to prepare for a litigation case, and the bidding process.
more...
Materials of Construction for Process Equipment and Piping Systems
This course provides comprehensive & practical understanding of engineering materials & guidance on the methods & best industry practices for the selection of the appropriate materials of construction for specific applications.
more...
Geotechnical Aspects of Pavements
This course covers the latest methods and procedures to address the geotechnical issues in pavement design, construction and performance for new construction, reconstruction and pavement rehabilitation projects.
more...
Evaluation and Rehabilitation of Pavements
Cost-effective pavement management results from careful design, quality construction & timely maintenance. Engineers and technical managers are faced with the challenges of maintaining, within shrinking budgets, the investment in highways & urban roads.
more...
Design Construction and Rehabilitation of Culverts and Channels 18 CEUs
By participating in this workshop, you will focus on the practical application of sound planning, design, construction and maintenance practices for open channels and culverts.
more...
From O'Brien & Company
LEED AP Specialty Exam Prep




A typical 8 hour course includes presentations on the LEED Exam structure, content, and test taking tips; quizzes and practice exams; flashcard game; small group exercises to practically apply LEED credits and more. These sessions are available for the following specialization tracks:
a Existing Buildings: Operations & Maintenance (O+M) Study Session
a Building Design & Construction (BD+C)
more...
From Skills Matter
OSGi Dynamic Module System for Java - 4 days - UK


...incipally on one of them (Equinox). Then we dive into the construction of OSGi bundles, how to describe dependencies between bundles and manage multiple versions of each.
Then we move onto the dynamic aspects of OSGi, starting with basic bundle lifecycle concerns before moving on to "services", which are OSGi's solution to dynamic late binding. After covering the nuts and bolts of services
more...
From Future Media Concepts
Revit 2010 Architecture Fundamentals
...m Preliminary Design through Design Development, and into Construction Documents, the program streamlines the design process with a central 3D model.
The objective of the Revit Architecture 2009 Fundamentals course is to enable students to create full 3D architectural project models and set them up in working drawings. Most of the course is focused on Design Development tools - building the 3D
more...
Revit 2009 Architecture Advanced
Inventor 2009 Advanced Assembly Modeling builds on the skills acquired in the Inventor Introduction to Solid Modeling and Advanced Part Modeling training guides to take students to a higher level of productivity creating and working with assemblies in Inventor.
Our training guide begins by discussing the concept of Top-Down Design for assembly creation. Planning the assembly using the top-down
more...
Revit 2009 Architecture Intermediate
Course Objectives
Revit Architecture is a powerful Building Information Modeling (BIM) program that works the way Architects think. The name a Revita implies this ease of revision that is at the heart of the software. Since building projects themselves tend to be extremely complex, Revit Architecture is a necessarily complex program.
This 2009 training guide has a significantly different
more...
From Technology Ed
Lean Six Sigma




...spectives- Human Resources, Marketing, Sales, Operations, Construction, Government, Finance, and IT. Specific topics include: Maximizing Business Value, Critical to Quality, Voice of the Customer, Measurement Systems, Data Collection Plans, Design of Experiments, Analysis, Process Control, and Response Plans.
Students who are interested in mastering the Six Sigma methodology can also use
more...
From Abar Solutions
Advanced Safety Management in the Oil & Gas Industry


Safety and Health management are becoming an evermore important aspect in the control and reduction of accidents, incidents, illness and expensive litigation claims. In Oil & Petrochemical industries the essential purpose of Safety Management regulations is to access the scopes and definitions, areas of specific responsibility of various parties, competencies expected, safety awareness and safe
more...
From CPR Florida
CPR ACLS PALS First Aid AED American Heart Association aha Healthcare Provider BLS Heartsaver
... athletic trainers, home health care, childcare, daycare, construction workers, dentists, coaches, counselors, babysitters, new parents, teachers and anyone interested in learning life-saving skills.
Class prices:
Pricing depends on the number of participants and certifications needed. Examples: CPR and AED $40 | CPR, AED and First Aid Combo $50 | American Heart Healthcare Provider BLS $65
more...
From Abar Solutions
Pump Technology


...p circuit
Operating conditions
Selection Criteria:
Construction and Technology: API and ISO specifications
Internal Forces and Mechanical Criteria:
Shaft sage
Coupling and balancing and ring clearances
Mechanical seal selection
Stability
Friction face heating
Start up
Priming
Shutdown and Survey:
Vibration levels and noises
Main causes of damage
Bearing housing
more...
From MGM Training Limited
Level 3 Award in Supervising Food Safety in Catering




...P
a HACCP from purchase to service
a The Design and Construction of Food Premises and Equipment
a Food Pests and Control
a Cleaning and Disinfection
a Supervisory Management
a Food Safety enforcement
Course duration
a Three days
Assessment
a A two hour, 60 question multiple choice paper (may be conducted orally)
a Candidates must achieve at least forty
more...
From FormaServe Systems Ltd
TCPIP Administration on the IBM i



This one day course has been designed for technical and operational staff that need to be competent on how TCP/ IP fits into the IBM System i world.
The course will cover all aspects of this popular communications protocol.
Numerous lab exercises will ensure students are exposed to the maximum benefits of this course.
The latest features of IBM i will be demonstrated during this course.
more...
Webservices on the IBM i



This one-day instructor-led course gives a succinct overview of the process of creating, publishing and using Web services on the IBM i server.
It proceeds to explain various topics such as SOA, XML, SOAP and WSDL.
Students will use this training to learn to develop the required Webservice components (both server and client side).
This course has been developed for real-world, commercial
more...
WebSphere Application Server Administration



If your daily tasks include supporting the IBM WebSphere Application Server, then this is the course for your.
On this course you will learn how to install and configure WebSphere on the i5/ iSeries.
Learn how to deploy and install business applications, perform regular administration tasks, determine problems and backup & recovery of WebSphere configurations, applications and data.
Also
more...
WebSphere Management Overview


This course will give an overview of all the IBM products under the every changing IBM WebSphere umbrella.
The latest features of IBM i will be demonstrated during this course.
We are dedicated to providing quality education for the IBM i. Our mission is to aid you and your staff to take advantage of new and existing technologies and become more productive in your everyday work. All our
more...
From World Institute for Security Enhancement
Securing Mass Transit - Enhancing Passenger Safety




...rogram addresses security in system planning, design and construction of future facilities, agency policies and procedures, managing special security issues, and training issues for various types of Transit System staff.
Interested agencies and employers are also invited to contact the World Institute for Security Enhancement to discuss their particular needs so that on-site training can be
more...
From UC San Diego Extension Digital Arts Center
AutoCAD II Working Drawings
... AutoCAD 2011 applications. Develop an abbreviated set of construction documents and learn important manipulation and management tools for assembling and integrating drawings within the project document set. Topics include advanced commands and drafting conventions.
Note: Students must be officially enrolled by and attend the first session. Prerequisite: the preceding course (AutoCAD I) or
more...
Learn More About AutoCAD at UC San Diego Extension
... AutoCAD 2011 applications. Develop an abbreviated set of construction documents and learn important manipulation and management tools for assembling and integrating drawings within the project document set. Topics include advanced commands and drafting conventions.
Note: Students must be officially enrolled by and attend the first session. Prerequisite: "AutoCAD I" (ARCH-4B001) or equivalent
more...
From CAD Training Online
Introduction to Revit Architecture 2012





...of Revit Architecture 2012, from schematic design through construction documentation. You will be introduced to the concepts of building information modeling and the tools for parametric building design and documentation.
The following software enhancements in Revit Architecture 2012 were included in the Introduction to Revit 2012 class:
* Properties Palette always available
* Modify
more...
From Gemstech Institute
OSHA Safety Course 30 Hours 10 Hours Approved by USA Govt
...ational Diploma )
Food SAFETY ( International Diploma )
Construction Safety ( International Diploma )
Industrial Safety ( International Diploma )
Medic First Aid USA Safety ( International Diploma )
NASP Safety ( International Diploma )
IASP Safety ( International Diploma )
IOSH Safety ( International Diploma )
NEBOSH Safety ( International Diploma )
HVAC MEP Designing, Drafting (
more...
From CAD Training Online
Introduction to Revit MEP HVAC







Learn about building information modeling and the tools for parametric Revit MEP HVAC systems design and documentation using Autodesk Revit MEP 2011.
After completing this course, you will be able to: describe the benefits of BIM, use the fundamental features of Revit MEP 2011 - HVAC, set up, import, and link projects, use the parametric 3D design tools to design and analyze mechanical systems,
more...
From Ten Six Consulting, LLC
Microsoft Project Fundamentals
...track to professional scheduling and robust critical path construction with our in-house developed curriculum. The class materials are written by working professional schedulers to guarantee that you learn the most relevant and critical skills you need to create flawless schedules. We differentiate our curriculum by emphasizing the context of functionality and how it applies in the real world
more...
From Electrical Training USA
OSHA 10-Safety Training for Construction
... the OSHA requirement for 10 hour safety training for the construction
industry. Attendees will each receive a 10 hour safety training card from OSHA. For the full
30 hour OSHA safety training seminar (recommended for managers and supervisors) click this link.
OSHA 10 hour training seminar objectives:
This seminar is designed to provide instruction on the construction industry safety and
more...
From Gemstech Institute
safety course providers in india dubai kenya cameroon
OFFER TRAINING :
FIRE AND SAFETY MANAGEMENT ( International Diploma )
HEALTH SAFETY & ENVIRONMENT (HSE) ( International Diploma )
HVAC MEP Designing, Drafting ( International Diploma )
ADVANCE WEB DESIGNING / GRAPHIC DESIGNING, ( International Diploma )
ADVANCE BUILDING DESIGN ( International Diploma )
AUTOCAD 2D/ 3D ( International Diploma )
OSHA training 10/ 30 hours
ADVANCE COURSES
more...
fire and safety course in india hyderabad
...ANCE COURSES DIPLOMA./CERTIFICATES .
INTERIOR DESIGNING
CONSTRUCTION ENGINEERING
FIRE AND SAFETY MANAGEMENT
HEALTH SAFETY & ENVIRONMENT (HSE)
HVAC MEP Designing, Drafting
ADVANCE WEB DESIGNING / GRAPHIC DESIGNING,
ADVANCE BUILDING DESIGN
AUTOCAD 2D/ 3D
SAP>FICO,
MCSE CCNA CCNP , A+,N+
TALLY ADVANCE, PEACHTREE, AMERICAN ACCOUNTS .,ETC.,
" Seeing is Believing"
more...
From CAD Training Online
Introduction to Revit Architecture 2010




...of Revit Architecture 2010, from schematic design through construction documentation. You will be introduced to the concepts of building information modeling and the tools for parametric building design and documentation.
Objective: The objective of this course is to enable you to create full 3D architectural project models and set them up in working drawings. This class focuses on basic
more...
From Travel Academy of India
Diploma in Travel Studies











...ATA codes
3. Itinerary Planning
4. Reservation
5. Fare Construction
6. Ticketing - Automated & Manual
7. BSP a ticketing & reporting
8. Terms & Terminology
9. Documentation
10. Baggage Handling
11. Conventions & Organizations
12. Time Calculation
13. Tours and Tourism
14. Travel Agency Operations
15. Airline Information a Names, Locations, Codes etc
16. Airports & Aircraft a
more...
From Associated Builders and Contractors, Golden Gate Chapter
Continuing Education
...ding education and training throughout the careers of the construction workforce. Because the construction industry changes and becomes more challenging every day, constantly training and educating your workforce is essential to staying ahead. ABC Golden Gate is constantly looking for ways to help members keep pace with this ever-changing industry by offering continuing education classes. These
more...
Apprenticeship Training

...e crafts of electrical, carpentry, painting, plumbing and construction craft laborers. The ABC apprenticeship classes are currently held at the ABC training facility located at 4577 Las Positas Road, Unit C, Livermore, CA 94551. Each apprentice is required to attend classroom training where he or she learns the theory of the apprenticeship trade. The use of tools of the trade, safety, job
more...
From Inprocess Technology & Consulting Group
Improving Refinery Operations Through Process Simulation


AN ADVANCED COURSE TO SOLVE REAL REFINERY OPERATING PROBLEMS.
After attending a basic course in process simulation, engineers are faced with the task of developing simulation cases for a specific objective. Whether they have to troubleshoot an operational problem, to monitor the process performance, to improve unit yields or to minimize energy consumption, they have to start the simulation in a
more...
From Safer Food Scores
Level 4 Award in Managing Food Safety in Catering
...s and Controls from Purchase to Service The Design and Construction of Food Premises and Equipment Cleaning and Disinfection Pest Management Food Safety Management and HACCP The Role of the Manager Food Safety Legislation and Enforcement
How is it assessed?
This is a 2 hour exam consisting of two test papers at the end of the course. Paper One is a 30 question
more...
Level 3 Award in Supervising Food Safety in Catering
...HACCP HACCP from Purchase to Service The Design and Construction of Food Premises and Equipment Food Pests and Control Cleaning and Disinfection Supervisory Management Food Safety Enforcement
How is it assessed?
There is a two hour 60 question multiple-choice test at the end of the course and you need 40 out of 60 to pass (or 50 out of 60 for a merit). Following the
more...
From Forklift University
Forklift 102
Forklift Drive training program for individuals that want to be certified and learn to safely drive a forklift but have no hands on experience.
The class is a full day of safety training, hands on driver training, pallet placement, maneuvers and other skills required to become a safe and experienced forklift operator.
more...
From Act Training
Excel Level 3
Advanced level one day hands-on instructor led course on Microsoft Excel. Topics include: Customizing the Work Area; Advanced Formula Construction; Using Pivot Tables; Working with Multiple Worksheets; Consolidating and Analysing Data; Using Protection and Display Options; Introduction to Macros; Working with Interactive Excel Web Documents.
The prerequisite for this course is Excel Level 1 &
more...
From Sprunt Media Ltd
Revit Architecture Essentials
...e 2009, and then progressing through schematic design and construction documentation, before finishing with design visualization. Students should be able to complete their first Revit Architecture project after completing this course. The primary objective of this courseware is to teach students the concepts of building information modeling and introduce the tools for parametric building design
more...
From Ducat
Autodesk Revit Architecture Training Noida Gurgaon
Autodesk Revit Architecture often referred to as simply Revit is a Building Information Modeling software developed by Autodesk. It allows the user to design with both parametric 3D modeling and 2D drafting elements. Building Information Modeling is a Computer Aided Design (CAD) paradigm that employs intelligent 3D objects to represent real physical building components such as walls and doors.
In
more...
Autodesk Revit Architecture Training Noida Ghaziabad
Autodesk Revit Architecture often referred to as simply Revit is a Building Information Modeling software developed by Autodesk. It allows the user to design with both parametric 3D modeling and 2D drafting elements. Building Information Modeling is a Computer Aided Design (CAD) paradigm that employs intelligent 3D objects to represent real physical building components such as walls and doors.
In
more...
From LearnVirtual
Visualization with BIMx Piranesi and Artlantis - Introduction to Artlantis 4 Render and Studio

LearnVirtual is an online training program that allows you to learn right from your desk!
This 5 part series will focus on how to use 3 popular add-on products for visualization : BIMx, Piranesi and Artlantis. The class will review how to use BIMx including rendering controls, saving animation paths and exporting an interactive BIMx file, how to use Piranesi including using the style browser,
more...
Visualization with ArchiCAD - Creating and Managing Materials

LearnVirtual is an online training program that allows you to learn right from your desk!
This 4 part series will focus on how to get the best visualization out of ArchiCAD including rendering settings, view settings, the materials list and assigning materials as well as how to fine tune renderings with ArchiCAD including refraction and reflection, the rendering toolbar, photorendering
more...
