Online Construction Industry eLearning
Construction Industry Training Provider? - Tell us about your Training!
From 123-CBT Computer Based Training
Construction Safety Orientation

Construction Safety Orientation
This course is designed to inform new construction workers and site visitors in and around construction sites of the potential hazards and safe work practices associated with the construction industry. The content in this course is designed to comply with the intent of the applicable regulatory requirements - recognize hazards commonly found at construction
more...
Construction Safety Orientation
From HAZMAT Plans & Programs, Inc
OSHA 30 Hour for Construction - Online OSHA 30 Training

...ensive safety program designed for anyone involved in the construction industry. Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues. OSHA recommends Outreach Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Construction workers must receive
more...
OSHA 30 Hour for Construction - Online OSHA 30 Training
OSHA - 10 Hour Construction Outreach Training Program - Online

The OSHA 10 Hour training for Construction is part of OSHA's Outreach Program to train workers in the basics of occupational safety and health. The 10 hour course is geared to the general laborer and new hires and serves as a safety orientation for work on a construction site.
In this course, students will be introduced to the basic safe practices of identifying, reducing, eliminating and
more...
OSHA 30 Hour Construction Outreach Training - Online


...l health and safety hazards of welding and cutting in the construction industry (Subpart J- Welding and Cutting)
- Identify common electrical hazards and related OSHA standards (Subpart K- Electrical Standards)
- Understand the importance of scaffolding for workers in elevated workplaces (Subpart L- Scaffolding)
- Implement measures for protecting workers and equipment from dangerous
more...
OSHA FOCUS FOUR - Online training

...s, and Falls are the Top 4 fatality causing events in the construction industry. The OSHA Focus Four course is designed to educate construction workers to these specific hazards so they can prepare for them, avoid them, and ultimately help eliminate them from the job site.
OSHA Focus Four Training Cost: $45. 00
Course Duration: 4 Hours
OSHA Focus Four Training Enrollment:
more...
From The Swamp School
OSHA - 30 Hour Construction Industry Outreach Training Program


This module covers thirty (30) hours of courses, required by the Occupational Health and Safety Act (OSHA), that apply toward 30-hour Construction Industry course completion card. This module is comprised of 23 sections, each either one or two hours in length, and covering topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of this course will help to meet
more...
OSHA - 10 Hour Construction Industry Outreach Training Program


This course covers ten (10) hours of courses, required by the Occupational Health and Safety Act (OSHA), that apply toward 10-hour Construction Industry course completion card. This module is comprised of 12 sections, covering topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of this course will help to meet the Construction Industry standards established
more...
From 6P International, LLC
10 Hour Construction Industry Outreach Training Program - Spanish
...ers, foremen, job supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will
more...
30 Hour Construction Industry OSHA Outreach Training Program w Study Guide
...alth and Safety Act (OSHA), that apply toward the 30-hour Construction Industry course completion card. The course is comprised of 25 sections, each either one or two hours in length, and covers topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of this course will help meet the Construction Industry standards established by OSHA.
OSHA 30-Hour
more...
10 Hour 30 Hour Construction OSHA Outreach Courses
...urses at the same time!
COURSE NAME:
OSHA - 10 Hour Construction Industry Outreach Training Program
COURSE DESCRIPTION:
1. 0 IACET Approved CEU This course is designed for construction workers, foremen, job supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers
more...
30 Hour Construction Industry OSHA Outreach Training Program
COURSE DESCRIPTION:
This course covers thirty (30) hours of training, required by the Occupational Health and Safety Act (OSHA), that apply toward the 30-hour Construction Industry course completion card. The course is comprised of 25 sections, each either one or two hours in length, and covers topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of this
more...
10 Hour Construction Industry OSHA Outreach Training Program w Study Guide
...ers, foremen, job supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will
more...
10 Hour Construction Industry OSHA Outreach Training Program
...ers, foremen, job supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will
more...
OSHA 1926 STD 3-11
CATEGORY:
Construction
COURSE DESCRIPTION:
This course is designed for those in the construction industry who follow state OSHA plans and federal plans.
This course discusses the 29 CFR 1926. 20, General Safety and Health Provisions, 29 CFR 1926. 21, Safety Training and Education, 29 CFR 1926. 23, First Aid and Medical Attention, and 29 CFR 1904. 2, Recordkeeping Requirements.
more...
Occupational Health and Environmental Controls
This course is designed for people working in the construction industry who are exposed to health hazards and chemicals during the course of their work. Topics include definitions, hazard communication standard, asbestos standards, MDA, lead, worker protection programs, process safety management of highly hazardous chemicals, and cadmium. This course focuses on the topics covered in OSHA 29 CFR
more...
Hazards of Asbestos in the Workplace
...e to this property, asbestos have been widely used in the construction industry, especially for pipe and boiler insulation. Before 1973, asbestos was sprayed onto different surfaces for fire protection purposes, but this practice was banned due to the hazardous nature of asbestos. Furthermore, it is no longer used for insulating pipes and boilers. However, asbestos can still be found in many
more...
From Easy Safety School
OSHA Outreach 10 Hour Training for Construction Industry
Satisfy your OSHA compliance needs with our online OSHA 10 hour training course for construction industry. Our courses have been reviewed and accepted by OSHA for online distribution and are IACET authorized to provide CEUs. Proof of completion will be made immediately available by emailing our trainer. You will receive your official DOL 10 hour card in the mail upon successful completion.
more...
OSHA 30 Hour Training for Construction Industry
Satisfy your OSHA compliance needs with our online OSHA 30 hour training course for Construction INdustry. Our courses have been reviewed and accepted by OSHA for online distribution and are IACET authorized to provide CEUs. Proof of completion will be made immediately available by emailing our trainer. You will receive your official DOL 30 hour card in the mail upon successful completion.
more...
From B. F Environmental Consultant Inc
OSHA 10 hour - 30 hour Construction and Industrial Training Programs




... supervisors, job supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, upon completion of the course. Upon successful completion of the course, participants will receive
more...
From Serebra Learning Corporation
Construction Safety Orientation
This course is designed to inform new construction workers and site visitors in and around construction sites of the potential hazards and safe work practices associated with the construction industry. The content in this course is designed to comply with the intent of the applicable regulatory requirements. recognize hazards commonly found at construction sites recall safe construction work
more...
Industrial Safety - Ladder and Stairway Safety
In the construction industry falls from elevated workspaces such as ladders and stairways are responsible for more fatalities than any other type of accident. Ladder and stairway accidents also make up a sizeable portion of occupational hazards in various other industries. This course covers important guidelines to avoid such accidents by implementing ladder and stairway safety.
more...
From Gemstech Institute
osha safety course in india hyderabad dubai oman qatar gulf
OSHA
COURSE DESCRIPTION:
This course covers thirty (30) hours of training, required by the Occupational Health and Safety Act (OSHA), that apply toward the 30-hour Construction Industry course completion card. The course is comprised of 25 sections, each either one or two hours in length, and covers topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of
more...
From The Jacman Group
OSHA - 10 or 30 Hour Construction Industry Outreach Training Program
...urses at the same time!
COURSE NAME:
OSHA - 10 Hour Construction Industry Outreach Training Program
CATEGORY:
Provider The Jacman Group/ 360 training
COURSE DESCRIPTION:
1. 0 IACET Approved CEU This course is designed for construction workers, foremen, job supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an
more...
From HR Training University
OSHA 10 Hour Online Course (Outreach Training)
This course is designed for construction workers, foreman, job supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA. OSHA Completion card issued by the Dept. of Labor upon successful completion
more...
From RRC Training
NEBOSH International Construction Certificate





The NEBOSH International Construction Certificate has been designed to provide those working outside the UK who are making day-to-day decisions in construction work with the knowledge they need to ensure that the health and safety implications of their decisions are properly taken into account.
The NEBOSH International Construction Certificate covers all of the main principles relating to
more...
From ForceBuilders
OSHA 10
...Construction Industry Outreach Training with Study Guide PDF
Course Description
This package contains the OSHA 10 Hour Construction Industry Outreach Course and the OSHA 10 Hour Construction Industry Study Guide. The OSHA 10 Hour Construction Industry Outreach Training Program is intended to provide an entry level construction worker's general awareness on recognizing and preventing hazards
more...
From Online learning Enterprises Inc
Aerial Lift Training Program
Aerial lifts (aerial lifting devices) are typically used throughout construction, industry, and warehousing. However, the versatility and safety factors incorporated into these devices allow them to be utilized in almost any environment.
Our online Aerial Lift Training Program will focus on the safe operation of self propelled elevated work platforms and self propelled boom supported elevated
more...
From PDHengineer. com-Decatur Professional Development, LLC
Introduction to Construction Safety
...ely 7.7 million wage and salary jobs in the United States construction industry in 2006, making Construction one of the largest industries in the nation. That same year it was estimated that one fifth of the total workforce worked 45 or more hours per week. Often working days extend into the evening or night hours, thru weekends, and on holidays to meet schedule deadlines. Inclement weather may
more...
Fall Protection in Construction
...e become the leading cause of worker fatalities in the US construction industry. Workers involved in working at heights are exposed to potential fall hazards. OSHA recognizes that accidents involving falls are generally complex events frequently involving a variety of factors. However, most injuries and deaths associated with working at heights can be prevented by employing the OSHA Fall
more...
Fall Protection in Construction
...
Falls are the leading cause of worker fatalities in the construction industry. Between 150 and 200 workers are killed each year as a result of falls on construction sites. And 100,000 more construction workers are injured every year because of falls.
This course covers OSHA 3146, Fall Protection in Construction, which was created by OSHA in response to the high number of injuries and
more...
Scaffolding Use in Construction
...;s recent rule, Safety Standards for Scaffolds Use in the Construction Industry rule aims to protect workers using scaffolding in construction work. Scaffolding hazards continue to rank high on the list of the most frequently cited standards in the construction industry. In this course the student will learn some of the basics of scaffolding requirements in the construction industry. The
more...
Asbestos in the Construction Industry
...construction industry, asbestos is found in installed products such as sprayed-on fireproofing, pipe insulation, floor tiles, cement pipe and sheet, roofing felts and shingles, ceiling tiles, fire-resistant drywall, drywall joint compounds, and acoustical products. In this course the student will learn the OSHA requirements regulating asbestos in the construction industry. The student is
more...
Construction Site Stormwater Runoff Control
...gineers, managers, and all other personnel working in the construction industry requiring runoff control of storm water from construction sites. The student must take a multiple-choice quiz consisting of forty (40) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: Types and
more...
Fire Protection and Prevention
... common cause of worker injuries and fatalities in the US construction industry. Workers involved in working in environments containing combustible and/or flammable material are exposed to potential fire hazards. According to the National Safety Council figures, approximately 3 to 4 percent of all occupational fatalities are due to fires and burns. Annual average losses due to workplace fires
more...
