Instructor Led Course Training in South Yorkshire, uk

Course Training Provider? - Tell us about your Training!
Please select the location nearest to you: Sheffield   Finningley Doncaster   Doncaster  
Course Training Seminars and Classes
From Gaddon Consultants
Electromagnetic Interference and Compatability EMIEMC instructor led trainingPractical experiment ... without EM radiation is a very hard task. The EMC / EMI course looks at the sources of EM radiation, its effects on equipments and people, and the techniques available to locate, quantify and to counter the problems seen. This course also includes practical exercises in carrying out an EM survey, gives an understanding of the requirements needed in the choosing and using suitable test  more...
Radar Techniques instructor led training ...course looks at the RF techniques used in many military and civilian radar systems building on the knowledge gained in the a Introduction to RF Engineering coursea ™. The course looks at monopulse, pulse modulated and pulse compression techniques, Doppler radars, Combined techniques, Frequency Agile Radars, Radar Antennas, Synthetic Aperture Radars, ground penetrating radars and a brief  more...
Radio Frequency Engineering Fundamentals instructor led trainingbookworkshop / seminarpractical demostrations ...course designed to give management and sales staff a working background knowledge of RF engineering. For engineers this course is also a gateway into more in depth short courses on further aspects of RF engineering. The course is tutor led over 2 days with practical demonstrations and exercises to reinforce aspects of RF engineering. This course is run in Yorkshire and is also available  more...
Digital Modulation and Frequency Division Techniques instructor led training ...dulation and Frequency Division Techniques is a Tutor led course covering many of the Digital techniques used in the Radio Frequency spectrum. This training course is designed to give engineers new to the RF and digital modulation field background knowledge to allow them to carry out their duties efficiently and with a good understanding of the techniques used. Depending on the student  more...
Radio Frequency Electronics instructor led training ...course covers basic electronic principles from Ohms Law and capacitor theory through to Digital Modulation and EMC with the emphasis on their use within RF circuits. The mathematics that although The course is modular so closed courses can be tailored to match customers requirements. If all modules are incuded the course is 15 days. Open courses are 5 days covering basic subjects. Subjects  more...
RF engineering Link Budgets and Losses instructor led training ...course covering Link budget calculation and the posible losses that need to be considered when planning an RF project. This course is aimed at managers and engineers for whom link budgets and path calculation are part of their projects. The course is tutor led and based around link budget software, it is also available for On-site training as well as part of Gaddon Consultants RF engineer  more...
From P4B Training
Waxing Course ...course, students will learn how to wax different areas of the body using warm wax. Course content: 1. Anatomy and Physiology (online) 2. Contra-indications (Non-treatable and treatable conditions) 3. Contra-actions (Adverse reactions to the treatment) 4. Health and Safety (online) 5. Assessment and Consultation techniques 6. Salon Hygiene (online) 7. Preparation of area 8.  more...
ifx eye enhancements instructor led trainingon-line e-learning cbt (computer based)study at homebook a During this course students will learn how to do the ultimate eye treatment. Give your clients the celebrity look without paying celebrity prices. The course includes eyelash and eyebrow tinting, eyebrow waxing and eyelash extensions (both individual and flared) Each of the above is a stand alone qualification and is fully insurable.  more...
Gel Polish ...Certificate Please Ring for dates Duration: 2 Hour Course Cost 36 (VAT included) During this nail course students will learn the practical skills needed to apply Gel Polish (e. g. Shellac, Gelac, Gellish) Students must hold a manicure and pedicure qualification or beauty level 2. This course contains: 1. Preparing the natural nails 2. Applying gel polish 3.  more...
Foundation Acrylic instructor led trainingcoursewarePractical lessons with demonstration This course includes Manicure and Pedicure. During this nail course students will learn the practical skills needed to apply acrylic nails and become a confident nail technician. This course is for complete beginners, with no prior qualifications.  more...
From That Project Management Company Ltd
Prince2 Foundation ...course is designed to provide you with a working understanding of the PRINCE2 structured project management method, to a level where you can use it to undertake many of the PRINCE2 roles within a project. Delegates will also have the opportunity to pass the PRINCE2 Foundation examination during the course. Previous experience of PRINCE2 is not essential, but a basic awareness of project  more...
From Envico LTD
17th Edition Training Update on-line e-learning cbt (computer based)group study and discussion ... update your knowledge and attend the 17th Edition Update course. The 17th Edition electrical qualification is called the 2382-20. If your qualification was obtained prior to June 2001 you will need to attend the full 3 Day 17th Edition Wiring Regulation training course. This electrical qualification is called 2382-10. The aim of the 17th Edition Wiring Regulation update training course is to  more...
City and Guilds 2392-10 Fundamental Inspection Testing and Initial Verification group study and discussion ...ental Inspection, Testing & Initial Verification training course is aimed at personnel with limited experience of inspection and testing of electrical installations. The training course will prepare candidates who wish to go on to achieve the City & Guilds Level 3 Certificate 2391-10. The course is also suitable for those personnel involved in inspection and testing of their own work, such as  more...
City and Guilds 2391-20 Design Erection and Verification of Electrical Installations group study and discussion ...ion and Verification of Electrical Installations training course is previously known as the City and Guilds 2400 course. The City and Guilds 2391-20 Design and Verification of Electrical Installations training course is a technical theory based course aimed at personnel who have responsibilities within their control for the design and specification of electrical installations as well as the  more...
City and Guilds 2377-12 - Portable Appliance Testing PAT Testing group study and discussion About the City & Guilds 2377a 12 PAT Testing training course The City & Guilds 2377a 12 PAT Testing course is suitable for those who undertake inspection and testing of electrical equipment. The City & Guilds 2377a 12 PAT Testing course includes a practical exercise using test instruments. City & Guilds 2377a 12 PAT Testing training course pre-requisites: A basic knowledge of  more...
EAL Certificate for Domestic Electrical Installers Part P group study and discussion ...L Certificate for Domestic Electrical Installers (Part P) course The EAL Certificate for Domestic Electrical Installers Part P training course is suitable for non-electricians who carry out some electrical work in domestic properties and need a formal qualification before registering to self-certify their work. On successful completion of the EAL Certificate for Domestic Electrical  more...
DEA Training group study and discussion ...course allows you to become a Domestic Energy Assessor (DEA) where your role will be varied, as you inspect and measure homes, gathering information and inputting the data into the software which produces Energy Perfomance Certificates (EPC) for a wide range of residential properties. DEAs are in huge demand a it is estimated that over 2. 5 million homes per year will need an EPC. Plus all  more...
NDEA Training Level 3 group study and discussion ...course allows you to become a Non Domestic Energy Assessor (NDEA) were your role will be varied, you inspect and measure commercial buildings as a requirement of the Energy Performance of Buildings Directive which was introduced for commercial buildings or industrial premises from April 2008. Qualified and accredited Non Domestic Energy Assessors are required to prepare these certificates.  more...
NEBOSH General Certificate ...al Certificate in Occupational Health and Safety training course is a widely recognised qualification for general health and safety responsibilities. The NEBOSH General Certificate Course is For: The NEBOSH General Certificate in Occupational Health and Safety training course is for personnel e. g. managers, supervisors, non-safety specialists etc with health and safety responsibilities  more...
IOSH Managing Safely group study and discussion ...course is a basic qualification in safety and health for managers and supervisors in all organisations. The aim of the course is to ensure that safety requirements are appreciated by people employed as line managers and enable them to review their own departmental systems for safety, introducing new controls or implementing changes as appropriate to make their workplace safer. Successful  more...
SMSTS Training group study and discussion ...course is one of the most highly regarded training courses within the construction industry available for site managers and supervisors, taken by more than 10, 000 people each year. The SMSTS training course helps site managers (and anyone wanting to become a site manager) to develop a better understanding of the legal, moral and social responsibilities of their role, and to manage health  more...
SSSTS - Site Supervisor Safety Training Scheme ...course has been designed to meet the needs of site supervisors within the construction industry. This course is for first line managers a those who have to, or are about to, acquire supervisory responsibilities. The course aims to highlight the need for risk assessment in the workplace, implementation of the necessary control measures and adequate communication and monitoring in order to  more...
First Aid At Work Refresher - First Aid Training group study and discussion ...tes have already expired. First Aid Refresher Training Course Duration: 2-Days First Aid Refresher Training Objectives On completion of the course, candidates will be able to demonstrate knowledge and skills from the First Aid At Work manual. These topics include: a The Aims & Priorities of First Aid a Burns & ScaldsLaws & Regulations a Protection From Infection a Infectious  more...
IEMA Environmental Awareness ...course is for The IEMA Enviornmental Awareness course has been designed for people who need a basic awareness of environmental issues. IEMA Environmental Awareness Course Overview The IEMA Environmental Awareness course is an ideal introduction to core environmental issues both at home and in the workplace. The focus of the IEMA Environmental Awareness course is on how we as  more...
IEMA Associate Certificate In Environmental Management The IEMA Associate Certificate training course is for people who have a responsibility for environmental issues, their management and implications for their organisations.  more...
IOSH Working Safely IOSH Working Safely is basic introductory health and safety training course, which will enable workers to ensure that their individual and collective actions contribute to health and safety in the workplace and that they understand their responsibilities.  more...
NEBOSH Fire Certificate group study and discussion NEBOSH Fire Certificate comprises of 3 units: Health and Safety Management, Fire Safety and Risk Management and Practical Fire Risk Assessment. This course is targeted at delegates who have successfully completed the NEBOSH General Certificate in Occupational Health and Safety or the Management of Safety & Health (week 1) of the NEBOSH General Certificate in Occupational Health and Safety in the  more...
CCNSG Safety Passport ...m access to a site or premises. The CCNSG Safety Passport course gives basic knowledge of Health and Safety and complements on-site induction, enabling employees to work more safely and with lower risk to themselves and others. The CCNSG Safety Passport is valid for three years, after this period renewal consists of a 1-day CCNSG Safety Passport Renewal course. The CCNSG Safety Passport  more...
SMSTS Refresher ...course was introduced on 1 April 2002 as part of the Site Management Safety Training Scheme. All Site Management Safety Training Scheme (SMSTS) certificates issued after 1 January 2001 are valid for a five year period from the date of issue. The two day SMSTS refresher course will enable current SMSTS certificate holders to renew their qualification. The SMSTS Refresher course is designed to  more...
NEBOSH Construction Certificate group study and discussion NEBOSH Construction Certificate in Health and Safety is aimed at responsible people who make day to day decisions in the construction industry. The NEBOSH Construction Certificate provides them with a good foundation in safety management issues to ensure the health and safety implications of their decisions are properly taken into account. This NEBOSH Construction Certificate is split into 3  more...
NEBOSH National Diploma group study and discussion ...Course is For The NEBOSH Diploma is designed for individuals who want to progress their career in health and safety and develop more in-depth knowledge and skills aiming to become health and safety practitioners. The New NEBOSH Diploma has replaced the Diplomas Part 1 & 2 in line with revised ENTO standards. All aspects of the NEBOSH Diploma qualification have been improved to benefit  more...
First Aid Training - First Aid At Work group study and discussion ...course aims to train employees up to the standard required by the Health and Safety Executive for the Purpose of the Health and Safety First Aid Regulations 1981. First Aid Training Objectives On completion of the course, candidates will be able to demonstrate knowledge and skills from the First Aid Training Manual. These topics include; The Aims & Priorities of First Aid Burns &  more...
SIA Door Supervisor SIA Door Supervisor is a three or four day course consisting of 28 hours of face to face tuition, together with two multiple-choice style examinations which take place at the end of Days 2 and 4 for a four day course, or both at the end of day three on a three day course. It is not necessary to have any specific experience or qualifications in order to attend the SIA Door Supervisor training  more...
City and Guilds 2391-10 Inspection Testing and Certification of Electrical Installations group study and discussion ...ng and Certification of Electrical Installations training course is designed for practicing electrical professionals who carry out regular testing and inspecting as well as completing written periodic inspection reports. The City and Guilds 2391 Certificate in Inspection Testing and Certification of Electrical Installations training course provides detailed technical tutoring in all aspects of  more...
tcw11--06/01/12-19:02:44-(3102)[B]-[A]-[A]