Instructor Led Course 10 Training

Master in Computer Applicatin augmented by Network Engineering This Master program is designed to make the candidate more industry relevant rather than pure academic. For this purpose, this course is designed under two platforms i. e. the Academic and Industrial The course duration is about 3 years for those who are not from a technology related graduation program. If the student is from a computer / technology background, then the course is only for two  more...

Cisco Netowrk Security Program Cisco Network Security Program prepares students to get certified as CCSP (Cisco Certified Security Professional). The course develops the candidates basic associate level network engineering knowledge to the professionallevel but specialized to the Security vertical of the Cisco certification path.  more...

Foundation Course in Network Engineering This program is basic network engineering program, primarily focussing on the fundamentals of networking domain. Here the students and given an introduction to the network engineering domain and the dunamental concepts are explained. Here the candidate is taught on peer to peer networking, networking history, crimping, testing etc. This course is designed to provide a strong foundation in  more...

J-STD-001 HAND SOLDERING - IPC CERTIFICATION -- A comprehensive, hands-on solder training and certification program based on the J-STD-001 book. This course gives companies and individuals all the knowledge they need to increase employee skills and performance. The course includes understanding the workmanship standards found in the J-STD-001 book and a healthy dose of hands-on soldering training.  more...

Soldering 101 Basic soldering skills for the beginner. Includes class and hands-on lab. Includes Safety, basic soldering techniques, soldering to terminals, soldering PTH parts in circuit board, soldering SMT parts onto circuit board. Includes STM certificate. IPC-A-610 workmanship standards are referred to, but are not the main element of this course. (For a full 4-day IPC-A-610 course contact  more...

IPC-A-620 Cabling, crimping, wire harness, connectors. The 4-day course includes internationally recognized workmanship standards covering: IPC policies, cable preparation, measuring cables, testing cables, crimped terminations, IDC terminations, soldered terminations, connectors, molding, potting, splices, marking, labeling, wire bundle securing, cable shielding, protective coverings, coax cable, twin ax  more...

Oil and Gas 24 Hour Hazard Recognition - Denver, CO The Oil and Gas 24 Hour Hazard Recognition is a 3 day training program held in Denver, Colorado. This course was developed as a helath and safety orientation for the Oil & Gas entry level person and support personnel. The course gives students an overview of pertinent OSHA Construction and General Industry regulations and how they apply to the Oil and Gas Industry. Discussion will concentrate on  more...

Scaffolding Safety The Scaffolding Safety training course covers the following subject areas, in accordance with OSHA Construction Standards found under 29 CFR 1926. 450 Subpart L : - General Requirements, Scope, Application and Definitions - Capacity and Platform Construction - Competent Person for Scaffolding and Responsibilities - Scaffold Inspection Requirements - Ariel Lifts - Training Requirements  more...

NFPA 70E and Arc Flash Safety, Denver CO Are you up-to-date on the NFPA 70E requirement changes in 2012 for Electrical Safety in the Workplace? The NFPA 70E and Arc Flash Safety course meets or exceeds all OSHA mandated training requirements under 29 CFR 1910 332 for safety related work practices. The program combines lecture and video presentations that deal with all required elements of the OSHAa ™s Electrical Safety-Related Work  more...

Basics of Hazardous Material Management The Basics of Hazardous Materials Management course is an excellent introductory level course for regulatory compliance with RCRA, Sara Title 111, DOT, Fire Code, OSHA, EPA, and State requirements for the basics of storage and compatibility of hazardous materials. Includes the basics of HAZCOM, HMIS, Teir 11 inventory and reporting, and HMMP planning. This course was developed for the facility  more...

Bloodborne Pathogens - Instructor Led The Bloodborne Pathogens course is designed for non-medical personnel who may come into contact with infectious material during their workday. The training course discusses OSHA requirements found under 29 CFR 1910 1030 pertaining to the general explanation of the epidemiology symptoms of Bloodborne diseases, modes of transmission, exposure control plan, Personal Protective Equipment (PPE) and  more...

Safety Manager Training - Denver, CO The Safety Manager Course is designed for anyone with the responsibilities of workplace health and safety. This might include safety committees, safety managers, facility managers, or the Company Managers. The Safety Manager course teaches students the applicability of OSHA regulations and the importance of a comprehensive safety management system. The course is a one day, Instructor-Led training  more...

OSHA 10 Hour Training for General Industry, Denver, CO, Instructor-Led Training The OSHA 10 Hour for General Industry class is an introductory training course that teaches workers hazard recognition and safe work practices in accordance with OSHA General Industry Standards, 29 CFR 1910. The 10 Hour Training program is geared for the entry level workers in manufacturing, oil and gas, warehousing, chemical processing, transportation, aviation, etc. The 10 Hour for General  more...

DOT HAZMAT Shipping - Denver, CO The HAZMAT Shipping course is the required training for any employee who handles hazardous materials including individuals who ship or receive hazardous materials, prepare hazardous materials for transportation, mark and label containers, complete shipping documents, select packaging, and the loading or unloading of hazardous materials. This course is designed to meet the training requirements as  more...

Trenching and Excavation Safety, Denver, CO The Trenching/ Excavation Safety Course is a "Competent Person" level training course that details the requirements for training found under OSHA standard 29 CFR 1926. 650 Subpart P. This training is applicable to all those working in & around excavations and trenches. The Excavation and Trenching course is Instructor led training and takes place in Denver, Colorado. The Trenching/ Excavation  more...

Denver, CO - Confined Space Training Hazmat Plans & Programs Confined Space training is a "Competent Level" Course. This safety course covers OSHA's requirements for Confined Space Safety found under 29 CFR 1926 21 and Permit-Required Confined Space, 29 CFR 1910 146. The Confined Space course is Instructor-led and takes place in Denver, Colorado. - - - - - - Confined Space training outcomes - students will become  more...

Denver, CO - OSHA 10 Hr. Training for Construction The OSHA 10 Hour Outreach Training for Construction is an instructor-led course held in our Denver, Colorado training facility. The 10 Hour Construction safety class is an introductory course that teaches workers hazard recognition and safe work practices in accordance with OSHA Construction Standards, 29 CFR 1926. A US Department of Labor OSHA wallet card will be obtained for each student who  more...

OSHA 30 Hour Training for General Industry - Denver, CO The OSHA 30 Hr. course teaches students the recommended best safe work practices as required under OSHA Standards for General Industry found under 29 CFR 1910. The training will provide your employees with the knowledge and tools for recognizing and mitigating the hazards most commonly found in your facility or job-site operations. The 30 Hour training is a four day Instructor-led OSHA Outreach  more...

Confined Space Training - Denver, CO The Confined Space training course covers OSHA's requirements for Confined Space Safety found under 29 CFR 1926 21 and Permit-Required Confined Space, 29 CFR 1910 146. The Confined Space safety training is an Instructor-led "Competent Level" course that takes place in Denver, Colorado. Next Class Date: June 26, 2012 1-5 PM Student objectives: Become knowledgeable in the following areas:  more...

Safety Manager Training Course The Safety Manager training course is intended for the entry-level Safety Manager or Facilities Manager who is assigned the duty of overseeing workplace health and safety. This training program will introduce the student to the applicable OSHA standards (Health and Safety Programs, Recordkeeping, etc.) and provide insight on how to achieve or maintain OSHA compliance through effective safety  more...

Fall Protection and Fall Prevention Training - Denver, CO The Fall Protection and Fall Prevention course meets OSHA's training requirements found under 29 CFR 1926 500 Subpart M. It is an Instructor-Led "Competent Person Level" course held in our Denver, Colorado training facility. Class participants will learn the difference between Fall Protection and Fall Prevention and the applicable OSHA rules that apply to each. Participants will also become  more...

Explosives Safety for Contractor DOD 4145 26M Compliance - Denver, CO The Explosives Safety Compliance course was developed to assist DOD contractors in meeting the safety and reporting requirements of DOD 4145 26M. If you are a manufacturer of munitions and explosives, this is the training you will need to be in compliance with DOD 4145-26M. Cost: $1450 Class Date: October 22nd - 26th, 2012 Location: Denver, CO - - - - - - - - - The DOD Explosives  more...

Denver, CO - OSHA 30 Hour Construction Training June National Safety Month Training Special on OSHA 30 Hour Training! - - - - - - - - - - The OSHA 30 Hour course teaches students the recommended best safe work practices as required under OSHA Construction Standards, 29 CFR 1926. This training will provide your employees the knowledge and tools for recognizing and mitigating hazards most commonly found on a construction site. All  more...

HAZWOPER 24 Hour Training, Denver, CO - Instructor Led Hazmat Plans & Programs 24-Hour HAZWOPER course is the training required by OSHA 29 CFR 1910 120 for the "Occasional Site Worker" on a hazardous waste site. If you are looking for 24 Hr certification, this is the course you will need. The HAZWOPER 24 Hour is an instructor-led three day class held in Denver, Colorado. Note: OSHA considers an "Occasional Site Worker" to be any worker whose job  more...

HAZWOPER 8 Hour Refresher, Denver, CO HAZMAT Plans & Programs' 8 Hour HAZWOPER (Hazardous Waste Operations & Emergency Response) training course satisfies OSHA's requirement for eight hours annual training as mandated by OSHA 29 CFR 1920 120. The focus of this course changes yearly to reflect trends and practices, regulatory updates and timely topics. The 8 Hour Refresher course is Instructor-Led and takes place in Denver, Colorado.  more...

Denver, CO - OSHA 10 Hour Construction Outreach The 10 Hour training safety course was designed by OSHA as a health and safety orientation for the new employee or general laborer on a construction site. The 10 hour teaches participants hazard recognition and safe work practices in accordance with OSHA Construction Standards, 29 CFR 1926. A US Department of Labor OSHA wallet card will be obtained for each student who completes the course. These  more...

HAZWOPER 40 Hour Training, Instructor Led Training in Denver, CO The 40 Hour HAZWOPER course is the initial training required by OSHA 29 CFR 1910 120 for workers on a hazardous waste site. The HAZWOPER Training includes both classroom instruction and a hands-on HAZMAT emergency response exercise. The 40 Hour HAZWOPER training course takes place over five 8 hours days in our training classroom located in Denver, Colorado. Who Should Take the HAZWOPER 40  more...

H2S Gas Safety - Denver, CO, Instructor Led Training H2S Gas Safety is the essential training course for wastewater, utilities, oil & gas and landfill workers. The objective of the H2S course is to ensure that class participants gain the required knowledge and understanding of the hazards and properties of Hydrogen Sulfide Gas(H2S). Participants will learn the appropriate response strategy to take should a H2S related incident arise. The H2S Gas  more...

ISO TS16949 Lead Internal Auditor training This course was developed and is only instructed by IATF certified ISO/ TS 16949 auditors with years of industry experience. Additionally, our instructors have been trained on adult learning concepts through Dale Carnegie. Recognizing the challenges of adult learning, many exercises and workshops have been integrated into the course materials for the students to immediately apply and enforce their  more...

ISO 50001 Energy Management Internal Auditor At the conclusion of this course, students will be able to: - Understand the ISO 50001: 2011 standard - Understand key energy issues - Plan an audit against a set of audit criteria - Successfully execute a energy management systems audit - Create clear, concise and relevant audit reports CONTENT: - Energy Issues - Energy Management Systems overview. - What to look for in Energy  more...

ISO 50001 Lead Auditor - Conversion Auditor - IRCA accredited This course is IRCA certified (course # A17573) and RABQSA recognized and accepted. At the conclusion of this course, students will have been provided with: Understanding of key energy issues Understanding of concepts and methods of energy auditing Understanding of Energy management systems including the requirements ISO 50001: 2011 A detailed understanding of the principal  more...

ISO 9001 QMS Lead Auditor - IRCA accredited This ISO 9001 Lead Auditor training course is IRCA accredited (course #17024) and RABQSA accepted and recognized. Upon successful completion of this course, students will be able to audit a company's quality management system and determine whether it meets the requirements of the ISO 9001: 2008 standard Public Course schedule / locations: July 23-27, 2012 - Houston, TX August 13-17, 2012 -  more...

ISO 9001 ISO 14001 OHSAS 18001 Internal Auditor Upon successful completion, attendees will have been provided with the knowledge to: * Conduct a process-based, ISO 9000: 2008, ISO14001: 2004, OHSAS 18001: 2007 integrated internal audit * Use a positive audit approach that seeks to add value * Identify audit criteria for the organization that goes beyond ISO 9000, ISO14001, OHSAS 18001 * Develop a customized checklist unique to the  more...

ISO 14001 OHSAS 18001 Internal Auditor Upon successful completion, attendees will have been provided with the knowledge to: * Conduct an internal ISO14001: 2004 / OHSAS 18001: 2007 internal audit * Use a positive audit approach that seeks to added-value * Identify audit criteria for the organization that goes beyond ISO14001 & OHSAS 18001 * Develop a customized checklist unique to the organization to be audited  more...

AS9100 Revision C - Transition Internal Auditor training This two-day course provides a comprehensive, detailed review of Aerospace Quality Standard AS9100: 2009 and AS9101D. It is beneficial to company management, quality staff, consultants, trainers and internal auditors seeking a detailed understanding of the new AS standard specific requirements. Topics include; * Detailed review of Aerospace Quality Standard AS9100: 2009 and AS9101D, including  more...

ISO 9001 Process Added Value Internal Auditor At the conclusion of this very popular course, successful attendees will have been provided with: * An understanding of the ISO 9001: 2008 Standard. * How to effectively audit top management. * The importance of meeting customer requirements and achieving customer satisfaction. * An understanding of the continual improvement aspects of the quality management system and where to apply  more...

OHSAS 18001 Lead Auditor This IRCA accredited (#A16830) OHSAS 18001 Lead Auditor training course uses a mixture of discussions and practical exercises. At the conclusion of this course, successful attendees will have been provided with the knowledge to: * Understand the OHSAS 18001: 2007 standard * Understand key Health and Safety issues * Plan an audit against a set of audit criteria * Successfully execute a  more...

ISO 14001 EMS Lead Auditor - IRCA Accredited This course is IRCA certified (course number A14478) and RABQSA recognized and accepted. This course uses a mixture of discussions and practical exercises to achieve its aims. The practical exercises are based upon a fictional company. However, the procedures, work instructions and data are typical and could relate to many different enterprises equally. The practical exercises have been carefully  more...

AS9100 Revision C Process and Added Value Internal Auditor At the conclusion of this course, successful attendees will have been provided with: * An understanding of the new AS9100: 2009 Revision C Standard and new AS9101 D checklist, including the changes between the Rev. B and Rev. C and the impacts to ISO 9001: 2008. * An understanding of the continual improvement aspects of the quality management system and where to apply them. * Knowledge of  more...

Speed Reading Techniques for Highly Effective People Training Objectives: By the end of the career training program, participants will be able to: Use advanced reading and comprehension skills. Read better and faster and concentrate more effectively. Get what they want and need from reading in less time. Comprehend and retain more of what they read. Know how to read work material, emails and all business reading more effectively.  more...

ASQ Lean Six Sigma Green Belt ' This program is designed for Participants typically come from finance, quality and business operations staff functions. Many have direct intervention as process owners or stakeholders. Learn how to function as a ?tools application? member of a six sigma team. Lead and execute process-level improvement projects. Collect process data and develop process maps. Develop statistical hypotheses  more...

ASQ Certified Manager of Quality Organizational Excellence Refresher ' This program is designed for Individuals who desire to reinforce their skills, knowledge, and capacity to understand the Certified Manager of Quality / Organizational Excellence Body of Knowledge in preparation for taking the ASQ Certified Manager of Quality / Organizational Excellence Examination. CEUs available: 1.9 Practice test testing skills. Review the Body of Knowledge for the ASQ  more...

Successful Report Writing Objectives: By the end of the program, participants will be able to: Write an effective report covering its various stages and divisions. Reach the proper conclusions based on analysis of findings. Give strong recommendations based on the right conclusions. Interpret numbers and illustrate reports with visual aids.  more...

Technical Report Writing Objectives: By the end of the program, participants will be able to: Write clear and reader friendly technical reports. Understand the structure of technical reports. Produce various types of technical reports. Prepare visuals that supplement and support technical reports. Present technical information in an understandable manner.  more...

CPSM Certification Preparation Course CPSM Certification Equals Results a The CPSM certification tells the world you are a professional in a core function of every organization. Certified Professionals earn 23% more than those without the certification. The Institute for Supply Management stated that a 2. 5% reduction in procurement costs produces the same amount of profit as a 10% increase in sales. We want to help you earn the  more...

CPSM Certification Bridge Exam Preparation Course For those with the Certified Procurement Manager (CPM) designation, this 2-day course prepares participants for success on the Bridge Exam of the Certified Professional in Supply Management offered by the Institute for Supply Management. CPSM Certification Courses - CPSM Bridge Exam 2-Day Review For Bridge Exam a I passed the CPSM Certification Tests in less than 30 days using the  more...

CPSM Exam Prep for Exam 1 - Foundation of Supply Management This 1-day course prepares participants for success on Exam #1 of the Certified Professional in Supply Management Program offered by the Institute for Supply Management. The course covers the foundations of supply management including contracting and negotiation, cost and finance, international business, social responsibility, sourcing, and supplier relationship management. Each of these areas  more...

CPSM Exam Prep for Exam 3 - Leadership in Supply Management This 1-day course prepares participants for success on Exam #3 of the Certified Professional In Supply Management offered by the Institute for Supply Management. This course covers leadership, risk and compliance, and strategic sourcing. These topics are covered in-depth and are critical to making supply chain management a strategic part of any organizationa ™s business operations.  more...

CPSM Exam Prep for Exam 2 - Effective Supply Management Performance This 1-day course prepares participants for success on Exam #2 of the Certified Professional in Supply Management Program offered by the Institute for Supply Management. The course covers forecasting, logistics, materials and inventory management, organization assessment, planning, product development, project management, and quality. Each of these areas enables effective management of the supply  more...

A Public Speaking Course - Presentations Skills for Speaking to Groups Attend this one day workshop and learn how to: Control your nerves and harness nervous energy to work for you Deliver a presentation with confidence and poise Organize your ideas in a persuasive, informative way Control your voice, gestures and body language Grab the audiencea ™s attention Create interesting and easy to follow visual aids Motivate your audience  more...

1 to 1 Professional Coaching - Sales, Presentations, Supervisory Skills If you get frustrated in large training sessions because (1) you can't focus on your specific issues, or (2) because you wait all day for that one kernel of information that will help you or if (3) you get intimidated practicing in front of large groups...try 1 to 1 Professional Coaching. Our professional trainers/ businesspeople can coach you on your process, your products, your employee issues  more...

Target Learning for Students In this program, students will learn how to apply a variety of flexible (and proven) reading and study strategies using your own preferred learning and thinking style. Keep in mind, this is not a gimmick course, these techniques do require practice. Fortunately, we make certain you have plenty of time during each class session to get the hands-on experience to become proficient with these learning  more...

Training the Trainers Seminar-Workshop Introduction Proper training is the most cost effective way to increase productivity and improve your bottom line. Make sure that the people in charge of training your personnel are themselves well trained. Although this program is designed primarily as a basic guide for new trainers, it is also useful for veterans in the profession as a refresher course and to update their skills.  more...

Human Resource Management Human resouce management is a vital function in every company and this concise course spans its broad scope. Important concepts and their application will be discussed along with the relevant laws dealing with employment. Organizational development will also be tackled along with talent and career management of employees to maximize your manpower resource.  more...

Computing Salaries, Wages, and Benefits Course Description: This course aims to provide participants with a functional knowledge of computing compensation and administering both legally mandated (e. g. SSS, Philhealth, Pag-ibig) as well as company initiated benefits. The details of each of these benefits will be discussed in-depth. Lastly, actual sample policies on some of these benefits will be shared with the participants to enable  more...

Events Management Business Seminar in the Philippines Overview Events management is one of the best business opportunities for the aspiring entrepreneur. Needing only a small capital, this creative and exciting venture has the potential for unlimited income. This excellent events management course is also highly recommended for those who are tasked by companies to organize their in-house events. Objectives a To learn events planning and  more...

Effective Collection Management and Strategies The course contains very relevant and practical scenarios on collection of receivables and negotiation. It is designed to challenge the creativity and resourcefulness of collection specialists. It can be used to train new collectors and at the same time serve as a refresher course for the more experienced workers. This course is highly recommended for any company or individual involved in the  more...

Heating Ventilating and Air-conditioning HVAC System Design and Value Engineering Postgraduate Diploma in Heating, Ventilating and Air-conditioning (HVAC): System Design and Value Engineering Programme Organisation This Programme is divided into 2 Distinct Courses, making it possible for participants to select desired modular sets, each of which provides the Award of Diploma a Postgraduate. The two courses, comprising the programme, lead to Postgraduate Diploma in  more...

Heating Ventilation Air-conditioning and Refrigeration HVACR Equipment Installation Diagnosis Repairs Maintenance Troubleshooti HEATING, VENTILATION, AIR-CONDITIONING AND REFRIGERATION (HVAC&R): EQUIPMENT INSTALLATION, DIAGNOSIS, REPAIRS, MAINTENANCE AND TROUBLESHOOTING COURSE OR SEMINAR Contents, Concepts and Issues Part 1 a Introduction Part 2 a Air-Conditioning Systems Part 3 a Moist Air Properties and Conditioning Processes Part 4 a Comfort and Indoor Air Quality (IAQ) Part 5 a Heat Transmission in  more...

Advanced Oil Tanker Operation STCW 2011 Compliant Course Programme For Advanced Oil Tanker Operation STCW 2011 Compliant (1) Leading to Diploma a Postgraduate a Advanced Oil Tanker Operation STCW 2011 Compliant (1) Advanced Oil Tanker Operation STCW 2011 Compliant Advanced Oil Tanker Operation STCW 2011 Compliant (1) Oil and Gas Operation, Petroleum Properties and Health and Safety Issues Duration: 6 Days Introducing the Oil And  more...

Advanced Agricultural Project Management The short content of the course: Advanced Agricultural Project Management (1): Project Management Issues: Setting the Stage for Agricultural Project Management Concept of Project Management Project Sustainability Developing a Project Project Planning Project management methodologies, tools and techniques Some problem solving techniques Project control Project  more...

International Trade Promotion Marketing 2 Course Objectives: By The Conclusion Of The Specific Learning Activities, Delegates Will Be Able To: Distinguish Between Different Approaches To Marketing And Their Underlying Philosophies Demonstrate An Awareness Of The Importance Of The Marketing Mix To Product Or Service Success List The Different Stages In The Product Life Cycle Demonstrate An Understanding Of Why Some  more...

Malaysian Industrial Relations and Employment Law Course Course Programme For Malaysian Industrial Relations and Employment Law Leading to Diploma a Postgraduate a in Malaysian Industrial Relations and Employment Law Part 1: Industrial Relations and Employment Law #1 Contents, Concepts and Issues Defining Industrial Relations A snapshots of International Industrial Relations Why Industrial Relations? The role of the government in  more...

Aviation Maintenance Management Course AVIATION MAINTENANCE MANAGEMENT FUNDAMENTALS OF AVIATION MAINTENANCE Part 1 a Why We Have To Do Maintenance Thermodynamics Revisited A Saw Blade has Width The Role of the Engineer The Role of the Mechanic Two Types of Maintenance Reliability Redesign Failure Rate Patterns Other Maintenance Considerations Establishing a Maintenance Program Part 2 a Development of Maintenance  more...

Accounting and Finance World Bank Compliant Course PROGRAMME OUTLINE PART 1: A CONCEPTUAL FRAMEWORK: SETTING THE SCENE Day 1: The Accountant and the Accounting Environment Accounting a Defined The Development of a Conceptual Network External Reporting Internal Reporting Types of Business Entity Sole Trader Partnership Limited liability Company Formation of Business Entity Running the Business Accounting Information Meeting  more...

Comprehensive Real Estate Management The content of the course: 1.) Real Estate Management: An Introduction (Formerly Fundamentals of Real Estate Management) - Real Estate Management: An Introduction (Formerly Fundamentals of Real Estate Management) - Real Estate Management: An Introduction - Deconstructing real estate management - Factors constituting an effective real estate management; - The Role of Real Estate  more...

Financial Risk Management Content and Concepts of course: 1. Risk: A Working Hypothesis - Defining Risk a Generally - Financial Risk: A Plausible Definition - Financial Risk in an Organisational Setting - Financial Risk and a Market Dynamicsa ™ - Liquidity Risk - Operating Risk - Fraud Risk - Settlement Risk - Corporate Strategy and Risk Management - The Currency Derivatives Market 2. Financial  more...

Internal Audit - Incorporating Corporate Governance and Financial Risk Management Course Objectives: MODULE 1.: Introduction, Fundamental Concepts and Issues in Internal Audit - Discuss, with confidence, the importance of internal account to an organisation - Use a manufacturing organisation, to provide an example of the way in which the cost elements might be apportioned, thereby paving the way for an effective internal accounting structure - Explicitly explore the  more...

Evaluating the Performance of Industrial Investments The Contents, Concepts and Pertinent Issues of the course: 1.) General Concepts for Understanding Business Performance - Rate of Return on Investment (ROI) - Operating income - Minimum acceptable income - Residual Income - Product innovation and leadership - Primary Cost Drivers - Critical Success Factors - Corporate Performance Measurement - Integrating Strategic Planning, Budgeting  more...

Public Relations in Principle and Practice Course MODULE CONTENTS, CONCEPTS AND ISSUES: 1. Public Relations and Pertinent Evolutionary Issues - Defining Public Relations - The Growth and Future of Public Relations 2. Preparing for Your Public Relations Role - Communication in Public Relations - Public Opinion and Public Relations - People Management in Public Relations - Employing Ethics in Public Relations - The Legal  more...

Tourism and International Relations A. COURSE OUTLINE: Module One - INTERNATIONAL ORGANISATIONS Objectives: By the conclusion of the specified learning experiences, delegates will be able to: - Explain the objectives and principles of the United Nations - Illustrate, with period or dates, the progressive development of International Organizations - Exhibit their comprehension of The United Nations, as an  more...

Managerial Facilitation of Value-Added Customer Service Excellence Course CONTENTS, CONCEPTS AND ISSUES: 1. CONTRIBUTION OF GOOD CUSTOMER SERVICE TO ORGANISATION MISSION & VISION ESTABLISHING GOOD STRATEGY POLICY - Benchmarking And Good Practice In Customer Care - Balanced Scorecard - Internal & External Factors Influencing Client Behaviour - Client Motivation - Responsibility Of The Service Provider And Manufacturer - Value Of Front-Line  more...

Tourism and International Relations Module 2 A. Course Outline International Relations and Conflict Resolution 1. OBJECTIVES: By the conclusion of the specified learning experiences, delegates will be able to: - Demonstrate an understanding of the extent to which International Relations affects our daily lives; - Conceptualize International Relations as a field of political science that is concerned mainly with explaining  more...

Tourism and International Relations Module 3 Course Outline Globalization and World Trade OBJECTIVES: By the conclusion of the specified learning experiences, delegates will be able to: - Internalize the phenomenon of globalization as, even though controversial, might be explained as the increasing worldwide integration in communications, culture, and economics; - Define Globalization in relation to the increasing  more...

Tourism and International Relations Module 1 A. Course Outline OBJECTIVES: By the conclusion of the specified learning experiences, delegates will be able to: - Explain the objectives and principles of the United Nations - Illustrate, with period or dates, the progressive development of International Organizations - Exhibit their comprehension of The United Nations, as an International Organisation, with specific relation  more...

Tourism and International Relations Modules 1 and 3 A. Course Outline A. 1 INTERNATIONAL ORGANISATIONS OBJECTIVES: By the conclusion of the specified learning experiences, delegates will be able to: - Explain the objectives and principles of the United Nations - Illustrate, with period or dates, the progressive development of International Organizations - Exhibit their comprehension of The United Nations, as an International  more...

Travel and Protocol Management COURSE CONTENTS, CONCEPTS and ISSUES: I. Visa and Immigration Formalities - Visa Processing - Visa Arrangements - Passport Processing - Hotel Visa Processing - Business Travel Requirements - reservation II. General Travel Management - Nature of Strategic Public Relations III. Booking Arrangement - Hotel Reservation - Airline Reservation - Corporate Hotel  more...

Computing and Information Technology Course CONTENTS, CONCEPTS AND ISSUES: - Computer Platforms - Systems Analysis - Programming Concepts - Database Design Concepts - Information Systems Projects - Information Systems - Human Computer Interface - Data Analysis and Design - Website Design - Project Management - Networking Concepts - Personal Skills Development - Visual Programming - Hands-on -  more...

Human ResourceTraining and Development Management THE PROGRAMME: Week # Module Title Objectives Contents 1 . Human Resource Planning By the conclusion of the established learning activities, delegate will be able to: a Determine the factors influencing human resource planning a Suggest the importance of human resource planning in organisation management. a Illustrate the significance of effective human resource. a Determine the  more...

Modern Marketing in a Consumer-Lead Environment Details of the course: 1. Objectives: By the conclusion of the specified learning and development activities, delegates will be able to: - Demonstrate a heightened understanding of the difference between customer needs and wants - View quality from the perspective of clients and customers - Evaluate existing marketing strategy, from the perspective of their effectiveness in our  more...

Vibration Analysis 1 - Double Credits Course Programme For Vibration Analysis: Module 1 Vibration Analysis - Fundamentals Introduction to vibration Defining Vibration Analysis Typical Vibration Instruments. Motion - R. M. S. Technique Vibration Amplitude Measurement Peak Vibration Peak to Peak Vibration Measurement Displacement, velocity and acceleration Units and unit conversion  more...

UK Employement Law About the course: OBJECTIVES: - Define the bases of the a employer-employee relationshipa ™ - Determine the purpose, components and parameters of the UK employment law - Illustrate the key provisions of the Employment Act 2002 - Explain the role of the Employment Act 2002 and its Statutory Instrument 2004, in averting a employer-employee repudiationa ™ - Identify some of the  more...

UK Consumer Protection Law The details of the course: - Consumer law - UK Consume Law; - Role of Local Trading Standards in Protecting Consumer Rights - The Role of the Office of Fair Trading in Protecting Consumers - Retailer Liability; - Manufacturer Liability; - Repair of Refund: Interpreting The Law - Manufacturersa ™ Warranty - Fit For Purpose: Retail Implications - When is a Sane  more...

Trainer Training Training for Trainers By the conclusion of the specified learning activities, participants will: - Be conversant with the theories of learning and memory crucial to the development and implementation of training programmes - Be aware of the taxonomy of educational objectives and translate these into individual capability and achievements - Determine the most appropriate way to organise training and development  more...

Team Dynamics Team Leadership 1. Course Objectives By the end of this presentation and its related activities, you will be able to: - Distinguish between groups and mere aggregations - Suggest the difference in interpretation of groups and teams - Demonstrate your understanding of the social and psychological relevance of the stages of formation of a group - Distinguish between task forces, committees, command  more...

Strategic Management and Project Management The details of the modules: Objectives: 1. The Individual In A Dynamic Environment By the end of the specific learning activities delegates will be able to: - Develop an awareness for their own strengths and weaknesses - Develop a strategy for maintaining their strengths while developing their weak areas. -Determine factors within their work environments that are stressors  more...

Small Business Start-Up Expansion and Management 2 Course Objectives Operational Costing Issues (2) At the conclusion of the specified learning and development activities included in this course, delegates will be able to: - Cost a Human Resourcea ™; - Integrate Fixed and Variable Costs; - a Cost Apportiona ™ - Factor a Accounting for Depreciationa ™ in a Cost Apportioninga ™; - Calculate Projected Sales and a  more...

Small Business Start-Up Expansion and Management 1 OBJECTIVES: At the conclusion of the specified learning and development activities included in this course, delegates will be able to: - Demonstrate a heightened understanding of the distinguishing factors of Industrial and Consumer Products, respectively; - Illustrate their internalisation of the need to establish the Industrial or Consumer Sector and sub-sectors that are to be targeted;  more...

SAP and Joint Venture Accounting Training methodology The seminar provides the conceptual framework and theoretical background to some key areas of financial management and decision making, which are put into a real world context by providing a practical a toolkita ™ of financial techniques. It includes many worked examples and case studies of real companies relating to each of the topics covered. Delegates are therefore  more...

Personnel and Occupational Testing The details of the course: Objectives: - Appreciate the value of employment testing - Determine measures to enhance test security - Ensure that the highest ethical standards are maintained for test users - Exhibit their ability to use test administration guide, appropriately - Effect percentile classification of test and test scores - Indicate the measures that need to be taken in  more...

Personnel and Occupational Test Questionnaire Design and Results Analysis The details of the course: Objectives: - Legally Engage In Test Improvisation/ Reproduction Activities - Demonstrate Their Ability To Successfully Engage In Test Scoring Activities - Exhibit A High Level Of Competence In Interpreting Test Results - Project A Demonstrable Knowledge Of Test Results Reporting - Write Psychological Assessment Results - State At Least 3 Pitfalls Of That Should  more...

Organisational Design Structuring and Restructuring Organisations The details of the course: Course Objectives: - Suggest the approaches which might be adopted in designing an organization - Design an organisation adhering to the principles of horizontal and vertical relationship - Distinguish between the basic types of structure - Appropriately define organisational structure - Distinguish between organismic and mechanistic structures; - Explain the  more...

Motivating Workers Intrinsic and Extrinsic Rewards Objectives of the course: 1. By the conclusion of the specific learning & development activities, delegates will be able to: 2. Demonstrate an understanding of the concept of motives and their value in organisational and subsystem effectiveness 3. Distinguish between the different sets of motivation theories, notably content, process and reinforcement 4. Demonstrate their ability to translate  more...

Modern Quality Systems and ISO 9000 The details of the course: Objectives: - Demonstrate their appreciation for consumer and client demand for quality - Demonstrate their awareness of consumersa ™ increasing quality consciousness - Exhibit an understanding of the role of Quality Systems in: a. Creating a positive organisational image b. Lowering operational costs c. Reducing or averting product or service liability  more...

Modern Quality Systems The details of the course: Objectives: - Demonstrate their appreciation for consumer and client demand for quality - Demonstrate their awareness of consumersa ™ increasing quality consciousness - Exhibit an understanding of the role of Quality Systems in: - Creating a positive organisational image - Lowering operational costs - Reducing or averting product or service liability  more...

Leadership Styles Seminar or Course Details of the course: Objectives By the conclusion of the specific developmental and learning activities, delegates will be able to: 1. Distinguish between control and influence administrative strategies 2. Demonstrate their understanding of the positive and negative implications of a managera ™s choice of administrative strategy for the management of his or her organisation  more...

Judge Seminar1 Dealing with Economic and Financial Crimes Content of the course: - Provide a technical and appropriate working definition of economic and financial crimes. - Make an assessment of the extent of public sector corruption in Nigeria and the rest of the world. - Assess the impact of globalization and media influence on economic and financial crimes proliferation. - Be in a position of strength to make assessments of the impact of  more...

ISO 9000 Quality Systems The details of the course: Objectives: - Demonstrate an understanding of the importance of quality standards - Explain what the International Organization of Standardizations (ISO) represents - Exhibit an understanding of the structure of ISO, as an organisation - Explain ISO code of ethics - Explain the benefits of ISO to organisations - Identify the hallmarks of the ISO as a brand -  more...

International Trade Promotion and Marketing A. Course Objectives: By The Conclusion Of The Specific Learning Activities, Delegates Will Be Able To: - Distinguish Between Different Approaches To Marketing And Their Underlying Philosophies - Demonstrate An Awareness Of The Importance Of The Marketing Mix To Product Or Service Success - List The Different Stages In The Product Life Cycle - Demonstrate An Understanding Of Why  more...

Information Risk Security and Crisis Management The details of the course: Course Objectives: - Demonstrate an understanding of the a risk contexta ™ - Demonstrate an understanding of the variety of disciplines to which risk management is applied - Develop an Information Security Policy and Identify their Organisation's Key Information Assets. - Formulate effective risk statements - Provide risk examples, distinguishing them from  more...

Employee Resourcing and Worker Motivation Course Objectives By the conclusion of the specific learning activities delegates will: - Exhibit an understanding of the desirability of a limited turnover of staff. - Demonstrate their ability to determine the type of commitment that motivate particular individuals to join an organisation - Have designed ways of stabilizing staff turnover/ high turnover - Be aware of how  more...

Corporate Governance Principles and Practice A. COURSE OBJECTIVES: 1. Functions of Management: An Introduction At the conclusion of the specified learning and development activities included in this course, delegates will be able to: - Accurately profile managers at different organisational levels - Outline, with examples, the planning process, as it applies to different organisational levels - Outline the planning  more...

Corporate Governance and Strategic Management A. COURSE OBJECTIVES: 1. Functions of Management: An Introduction At the conclusion of the specified learning and development activities included in this course, delegates will be able to: - Accurately profile managers at different organisational levels - Outline, with examples, the planning process, as it applies to different organisational levels - Outline the planning  more...

Communication Information Gathering Analysis and Report Writing A. COURSE OBJECTIVES A. 1. Use of English By the end of the specified Learning and development activities, delegates will be able to: - Demonstrate their ability to spell unusual words - Demonstrate their Mastery of the English a Peculiarsa ™ - Identify words with silent consonants, reflecting this factor in their spelling - Demonstrate their ability to  more...

Fundamentals of Electrical and Electronic Measuring Instruments (Double Credits) COURSE CONTENTS AND CONCEPTS Module 1: General Theoretical Explorations I. Introduction to Process Control * What types of measurements can you take? * What does it mean? * How is the information used? II. Electrical Measurement Standard * SI Units * PRIMARY Standards * Secondary Standards * Working Standards III. Uncertainty of Measurements  more...

Fundamentals of Air Cargo The outline of the course: Course Objectives: - Demonstrate a heightened knowledge of IATA geography - Produce The air waybill, using pre-designed templates - Relate the operation of freight forwarders - Demonstrate their understanding of the operation of airline cargo units - Demonstrate their ability to read cargo manuals - Demonstrate their knowledge of cargo in-flight operational  more...

Executive Leadership and High Performance Team Management The details of the course: Objectives: 1.) Team Dynamics - Distinguish between groups and mere aggregations - Suggest the difference in interpretation of groups and teams - Demonstrate your understanding of the social and psychological relevance of the stages of formation of a group - Distinguish between task forces, committees, command groups and boards - Suggest how informal  more...

Enhancing Objective Accomplishments Through An Enthusiastic Workforce The details of the modules: 1.) Motivating workers: Intrinsic and Extrinsic Rewards OBJECTIVES: - Demonstrate an understanding of the concept of motives and their value in organisational and subsystem effectiveness. - Distinguish between the different sets of motivation theories, notably content, process and reinforcement. - Demonstrate their ability to translate motivation theory into  more...

Conveyancing and Property valuation The outline of the course: Objectives: - Distinguish between a basic survey and a full structural survey - Determine when a full structural survey is necessary - Argue on the cost effectiveness of a structural survey - Detail the factors that should be taken into account when conducting a commercial property valuation - Relate the pertinent factors in private property valuation -  more...

Comprehensive Project Management A. OBJECTIVES AND RATIONALE 1. The Individual In A Dynamic Environment By the end of the specific learning activities delegates will be able to: - Develop an awareness for their own strengths and weaknesses - Develop a strategy for maintaining their strengths while developing their weak areas. - Determine factors within their work environments that are stressors - Manage  more...

Anti-Dumping and Anti-Subsidy Claims Measures and Stance Course or Seminar Contents and Concepts: - Trade and the Global Economy - Trade and the Global Economy - The role of international trade in economic development, sustainability and growth - Openness and productivity - The World Trade Agreement (WTA) 1994 - The establishment of the World Trade Organization (WTO) - Agreement Establishing the World Trade Organization - Article I -  more...

Advanced Cost Management for Business Competitiveness The details of the course: 1. PROGRAMME OBJECTIVES Participants gain the insights they need to win in the global marketplace. Key subjects that the seminar addresses include: - Information for informed management decisions - Management use of management accounting information - A new role for the management accountant - Cost management and Strategy - Basic Cost and Cost  more...

MSc Human Resource Training and Development Management A. Semester 1 A. 1 OBJECTIVES: A. 1. 1 Human Resource and Personnel Management By the conclusion of the established learning activities, delegate will be able to: - Demonstrate understanding of distinction between personal management and human resource management. - Indicate the significant aspects in development of human resource management and personal management. -  more...

Human ResourceManagement a Practitioners Approach The Objectives of the course: MODULE 1.: Human Resource and Personnel Management - Demonstrate understanding of distinction between personal management and human resource management. - Indicate the significant aspects in development of human resource management and personal management. - Demonstrate an appreciation of important of welfare in the development of personal management and human  more...

EPCIC Contract Management Essential Elements of International Contract Laws EPCIC Contract Management Essential Elements of I In the Energy construction and procurement business, the success of your project is dependent on your practical a know howa in contract management. Understanding the essential ingredients of contracts and mastering the fundamentals will equip you to identify vague contracts, avoid dangerous and often hidden terms, and better understand your position and your project. PetroEdge has  more...

Upstream Joint Venture Accounting Analysis Audit 28 30 May 2012 Kuala Lumpur About this training course This comprehensive training course is split into three main topic headings, and will raise your knowledge and understanding of E&P finance and accounting through industry-specific examinations of current international practices and developments in financial accounting, joint-venture and production-sharing accounting and auditing. Course highlights By attending this  more...

How to Interpret multi - well Pressure Depth Plots from DSTs RFTs and Hydrodynamics 28 May 1 June 2012 Perth About this training course This 5 day intensive training course will show participants how to use pressure data from DSTa ™s, Wire-line Tests (such as RFTa ™s & MDTa ™s) & production Tests ( from many different wells) to make Pressure/ Depth Plots which reveal permeability barriers such as pinch-outs, sealing faults & any barrier which can trap hydrocarbons. It will also  more...

Drilling Essentials for New Engineers and Non-Technical Professionals in Oil Gas 21 22 May 2012 Brisbane Australia International industry veteran with over 30 years of field and business experience in upstream Oil & Gas. Franz has gained his near thirty year experience in the Oil and Gas Drilling Industry around onshore and off shore facilities in Australia, the North Sea, Middle East, USA, Europe & Asia. He has experience in nearly every position around the rigs, including; roustabout, roughneck, derrick man,  more...

AVO Attributes Inversion Principles Applications 28 May 1 June 2012 Kuala Lumpur Malaysia This course provides an understanding of the evolving role of seismic petrophysics through the use of amplitude variations with offset or angle (AVO/ AVA), attributes, and inversion techniques. Understanding rock physics and the behavior of the propagating seismic waves represents an integral part of the course, especially in the context of specific applications including enhanced seismic  more...

Introduction to Offshore Drilling and Production Facilities 23 26 April 2012 Kuala Lumpur Malaysia This 4 day (separately bookable) intensive training course will cover the details of drilling rigs and how they operate, especially for deepwater activities. Current drilling rigs are highly automated and efficient. These advances will be illustrated with animations and videos. The relationship between drilling and production will be explored with examples of current field developments The  more...

Well Integrity Management 23 - 26 April 2012 Kuala Lumpur This intensive four-day course is designed to provide participants with a thorough knowledge of well integrity management and risk assessment in producing assets. Based on the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the oil and gas industry. When to take action with a well is a critical  more...

Production Technology for Non-Production Engineers 23-27 April 2012 Kuala Lumpur About this training course A decision to drill an exploration well with the objective to find a new oil or gas field must be based on a sound assessment of the prospect's risks and of the volumes: - what is the chance that a well will find hydrocarbons, and - how much could it be? Risk and volume assessments form the basis for decisions to drill a well or not, and as such form the link  more...

Production Technology for Non-Production Engineers 23-27 April 2012 Kuala Lumpur In this 5 day training course, the core functions and activities within Production Technology will be addressed and made clear to Non-production professionals working with the Exploration & Production value chain. The program is designed to give Nonproduction professionals the basic knowledge of this engineering discipline in order to improve their communication among the  more...

Budgeting and Forecasting in Oil and Gas 23- 25 April 2012 To stay on top, Oil & Gas companies must constantly re-examine the budgeting and forecasting models they use in their decision making processes to ensure they are up-to-date and incorporate the latest in budgeting and forecasting best practices. Is there an opportunity to expand take advantage of the stronger price of Oil? Where can technology costs be optimised? How does a drop of 10% in oil  more...

Interpreting and Managing Charterparty for Supply Veessels 23-25 April 2012 OSV Owners and the Charterers engage in very complex and high risk ventures with the prime objective of maximizing returns and minimization of risks. There is no benefit for either Party to be entangled in commercial or contractual disputes. But due to the abundance of uncertaintiesa ™ in the Offshore E & P business, priorities of the parties may differ, giving rise to conflicts. Conflicts  more...

Advanced Turnaround Shutdown and Outage Management with Tom Lenahan 23 - 25 April 2012 A 3 day training course derived from the Turnaround Model of Excellence developed by practitioners that guarantee the reliability of your operations. The course six modules develop and expand the basic ideas of the Model of excellence and introduce some new concepts to further enhance performance. The aim of the course is to expand the knowledge and give new insights on Turnaround Management to  more...

Technical Report Writing Presentation Skills For Oil and Gas Professionals 19 21 March 2012 Miri Sarawak Oil & Gas professionals increasingly need to translate complex findings, analysis and recommendations for effective decision making. If you a face challenges in getting your findings into paper and presenting it effectively, you will benefit from this 3-day training course: EFFECTIVE TECHNICAL REPORT WRITING FOR OIL & GAS PROFESSIONALS a Write and turn-around accurate technical documents  more...

PETROLEUM RISK ANALYSIS PORTFOLIO MANAGEMENT 12 14 March 2012 Kuala Lumpur Malaysia Course Introduction Risk and uncertainty are fundamentally embedded in the exploration and production business a arguably there is no business development without risk a yet the distinction between risk and uncertainty is often confused, and attempts to effectively manage risk and uncertainty are often poor in the industry. This 3 day course offers attendees the opportunity to explore  more...

Introduction to Offshore Drilling Floating Production Facilities 21 22 March 2012 Beijing China Course Overview This 2 day intensive training course will cover the details of drilling rigs and how they operate. As current drilling rigs are highly automated and efficient, these advances will be illustrated with animations and videos. The relationship between drilling and production will be explored with examples of current field developments. The course also covers offshore production  more...

HPHT WELL ENGINEERING 19 23 March 2012 Kuala Lumpur Malaysia Training Course Overview Conventional HPHT (High Pressure - High Temperature) conditions (>10, 000 psi and 300 F) are becoming routine drilling targets in many basins worldwide, as exploration and production examine deeper and hotter objectives. This course will equip participants with knowledge and skills of HPHT well engineering and the components required for well planning and issues  more...

How to Interpret Multi-well Pressure vs Depth Plots Pressure Maps from DST Wire-line Formation Test WFT data 5 9 March 201 bout this training course This 5 day intensive training course will show participants how to use pressure data from DSTa ™s, Wire-line Tests (such as RFTa ™s & MDTa ™s) & production Tests,( from many different wells) to make Pressure/ Depth Plots which reveal permeability barriers such as pinch-outs, sealing faults & any barrier which can trap hydrocarbons. It will also  more...

DEEPWATER WELL ENGINEERING 26 30 March 2012 Kuala Lumpur Malaysia Training Course Overview This 5 day training course examines the difficulties, challenges facing todaya ™s deepwater drilling programme designers and personnel where wells are being drilled in increasingly difficult downhole and environmental conditions. Ever increasing cost and legislation further contribute to design and operational pressures. From this training course, you will have  more...

How to Interpret Multi-well Pressure vs Depth Plots Pressure Maps from DST Wire-line Formation Test WFT data 12 16 March 2 About this training course This 5 day intensive training course will show participants how to use pressure data from DSTa ™s, Wire-line Tests (such as RFTa ™s & MDTa ™s) & production Tests,( from many different wells) to make Pressure/ Depth Plots which reveal permeability barriers such as pinch-outs, sealing faults & any barrier which can trap hydrocarbons. It will also  more...

Drilling Essentials For New Engineers Non-Technical Professionals 26 27 March 2012 KL Malaysia Gain an overview of drilling procedures, the terminology used, its cost components and the latest technological developments driving this activity By attending this 2-day industry fundamentals training course, you will better able to: Understand drilling terminology & drilling processes for completing onshore & offshore wells Appreciate major cost components of drilling operations  more...

DRILLING ESSENTIALS FOR NEW ENGINEERS NON-TECHNICAL PROFESSIONALS 20-21 March 2012 Beijing China Gain an overview of drilling procedures, the terminology used, its cost components and the latest technological developments driving this activity By attending this 2-day industry fundamentals training course, you will better able to: Understand drilling terminology & drilling processes for completing onshore & offshore wells Appreciate major cost components of drilling operations  more...

Applied EOR Technology Project Management 26 29 March 2012 Kuala Lumpur Malaysia This 4 day training course addresses the relevance and basic concepts of various EOR techniques. It will explain how any EOR technology can be integrated in the full life cycle planning, starting from the current development concept, through appropriate testing to field implementation of a EOR Scheme. The application of EOR technology demands strong coordination between many disciplines and  more...

PROJECT MANAGEMENT for Oil Gas Professionals 27 29 February 2012 Kuala Lumpur Malaysia About this training course At present, project managers in the oil and gas industry have to make decisions in an environment of high levels of uncertainty and risk. This interactive3-day course will equip you with the skills and knowledge to deliver successful projects, within budget, to deadline and of sound business value. Case histories and examples of projects will provide you with  more...

Fractured Reservoir Characterisation 27-29 February 2012 Kuala Lumpur Malaysia 2nd run in Asia This course provides a practical, integrated approach to characterising and modelling natural fractures where they are important for hydrocarbon delivery. Fractured reservoirs often display highly heterogeneous dynamic behaviour that is difficult to capture using standard reservoir modelling workflows. This course addresses all the relevant aspects of characterising and modelling fractured  more...

OSV Chartering Charterparty Management with Essential Elements of Maritime Laws 27 February - 2 March 2012 In the Offshore Oil & Gas industry, field development, hook-up and production activities are dependent on the reliable availability of a fleet of Offshore Support Vessels (OSV). Not only is the availability of OSVa ™s important, but expertise and a know howa in C/ P and or contract management is equally crucial. Understanding the essential ingredients of contracts and mastering the  more...

COMPETENCY MANAGEMENT SYSTEMS IN OIL GAS 27 29 February 2012 Kuala Lumpur Malaysia Within the Oil and Gas industry it is a requirement, both contractual and in some areas legislative, to ensure effective internal systems are in place which support employee development and provide evidence of their competence. A Competence Management System (CMS), correctly developed and applied provides employees and organisations with the tools to demonstrate competence and contributes to  more...

Advanced Seismic Data Processing 27th February - 2 March 2012 Course Description With the presence of new data acquisition techniques, new processing methods have to be developed. Existing and new data sets will be exploited for optimal information retrieval; in addition to the conventional P-waves also the S-waves will be investigated together with kinematic properties and dynamic properties for lithology and/ or direct hydrocarbon indication will be  more...

LNG Markets Spot Trading 20 - 21 Feb 2012 Singapore The LNG market is developing from a market based fully on long-term contracts, to a more flexible market based on a portfolio of contracts of different durations. The changes in the market, combined with increased demand are creating a base for a more flexible market, where the LNG spot market will be playing a role. The changes in the market can be identified in the following areas: development  more...

Introduction to Oil Gas Exploration Production For New Engineers Non-Technical Professionals 12-13 DECEMBER 2011 KUALA LUM By attending this 2-day industry fundamentals training course, you will better able to: - Appreciate the dynamics of world energy demand & supply and its impact on pricing - Understand the formation of petroleum reservoirs and basic geological considerations - Examine the exploration process to gain an overview of the technical processes involved - Gain a comprehensive overview of drilling  more...

9th run in Malaysia Revised Content EPCIC Contract Management Essential Elements of International Contract Law 13 15 Decemb In the Oil & Gas construction and procurement business, the success of your project is dependent on your practical a know howa in contract management. Understanding the essential ingredients of contracts and mastering the fundamentals will equip you to identify vague contracts, avoid dangerous and often hidden terms, and better understand your position and your project. PetroEdge has  more...

Introduction to Oil Gas Exploration Production For New Engineers Non-Technical Professionals 12-13 DECEMBER 2011 KUALA LUM By attending this 2-day industry fundamentals training course, you will better able to: - Appreciate the dynamics of world energy demand & supply and its impact on pricing - Understand the formation of petroleum reservoirs and basic geological considerations - Examine the exploration process to gain an overview of the technical processes involved - Gain a comprehensive overview of drilling  more...

Engineering of Subsea Production Systems 5 7 December 2011 Kuala Lumpur Malaysia This concise course is well balanced and based on more than 30 years of true project experience in Shallow and Deep Water fields around the world, from concept evaluation to first production. It is designed for Project Managers, Project Engineers, experienced or new to Subsea & highly suitable for Cost, Planning, Offshore Installation and Offshore Operation Engineers. All the Lectures  more...

Effective Plant Turnaround Management Optimising your Turnaround Management Strategy to Exceed Safety Quality Time and Cost Targ Turnarounds are complex projects that have a substantial impact on business performance. It is therefore imperative that the people who plan, prepare and execute Turnaround have an the in-depth skill and knowledge necessary to produce a successful outcome and an understanding of how Turnarounds work, why they sometimes dona ™t and what to do if they start going wrong. This complex,  more...

Gas LNG Contract Negotiations 5 - 7 DECEMBER 2011 SINGAPORE Energy is the worlda ™s biggest industry. It shapes the destiny of countries, peoples and companies. The 21st Century has been dubbed the a Gas Centurya because of the future dominance of gas in future energy expansion. This course starts with concise teaching sessions which explain how natural gas and LNG have come to be so important, and how these businesses work a these sessions will  more...

COMPLETIONS Equipment Applications Types Installation Workovers 16 18 January 2012 Kuala Lumpur This intensive three-day course is designed to provide participants with a thorough knowledge of completion equipment and operational procedures required for converting a drilled well into an efficient and safe producer. It follows a practical approach for the various completion types, specific applications, completion installation and workovers.  more...

Applied Petroleum Geostatistic 16-20 January 2012 Kuala Lumpur An appreciation of what geostatistics can achieve is now essential in nearly all important aspects of exploration and production: gridding and contouring for making maps, upscaling for reservoir simulation and basin modelling, as well as the analysis of spatially referenced data of all kinds. Without needing to know the details of the algorithms and the mathematics behind them, being able to  more...

Negotiation Skills Techniques for Engineers and Technical Professionals 19-20 January 2011 Kuala Lumpur Many technical experts find it difficult to move out of their expertise areas and deal with commercial matters. Negotiating to optimise business value is a step further from their comfort zones. All too often negotiations are then left to finance personnel. They bring many strengths to the table but an understanding of engineering trade-offs is not one of them. By attending this course  more...

Drilling Essentails for New Engineers and Non-Technicals Professionals in Oil Gas 30-31 January 2012 Miri Sarawak Gain an overview of drilling procedures, the terminology used, its cost components and the latest technological developments driving this activity By attending this 2-day industry fundamentals training course, you will better able to: Understand drilling terminology & drilling processes for completing onshore & offshore wells Appreciate major cost components of drilling operations and  more...

Writing Effective Standard Operating Procedures for Oil Gas Professionals Engineers 19 20 January 2012 Kuala Lumpur Malaysia A Standard Operating Procedure (SOP) is a set of instructions having the force of a directive, covering those features of operations that lend themselves to a definite or standardized procedure without loss of effectiveness. The presence of these quality documents is essential when inspections take place since the most frequent reported deficiencies during inspections are the lack of written SOPs  more...

2nd Run in Asia DEEPWATER TURBIDITES The course provides an opportunity to examine analogue data from turbidite reservoirs. The 2 day course will review the depositional setting, sequences that are associated with clastic deepwater systems, review the geological controls on reservoir quality and architecture, and put the environment into context of the petroleum system.  more...

Stuck Pipe Prevention Fishing 21 25 November 2011 Kuala Lumpur Malaysia It is estimated that approximately US$ 2 billion are wasted annually on stuck pipe. Furthermore it is believed that 80 a 85% of these stuck pipe incidents are preventable. The 3 day course (separately bookable) focuses upon the key mechanisms with which pipe becomes stuck and upon how the sticking mechanisms can be prevented through proper planning and operational procedures. It also covers the  more...

Clastic Exploration Reservoir Sedimentology This course has been developed to provide an understanding of the geometry and hydrocarbon potential of clastic depositional systems and facies, and how they are affected by such important features as basin configuration, tectonics and eustasy. Each of the major clastic environments is covered in terms of lithology, facies, log response and reservoir quality and the depositional models related to  more...

Subsea Pipeline Engineering with Andrew Palmer Roger King Subsea pipelines are the arteries of the offshore industry, and around the world more than 18, 000km are in service. Part of almost every project, they often form a large component of project cost. This course will provide a complete and up-to-date overview of the area of Subsea Pipeline Engineering, taking delegates through the pre-design phase, design, construction, installation, operation and  more...

Fundamentals of Finance Accounting Project Investment Analysis in Oil Gas This 3-day separately book-able course is not designed to skill Oil & Gas engineers to be accountants, but to give participants the confidence and ability to communicate with accountants and finance managers and to improve their own financial decision making. For engineering professionals, a high level of technical expertise is no longer sufficient for superior management performance. Oil &  more...

Root Cause Analysis RCA 23 - 25 November 2011 Root Cause Analysis is a systematic, evidence-driven process that helps you find the true underlying (and often hidden) causes that result in unwanted events. We will see why minor failures matter, and how they can escalate out of control. In this intermediate training course, we will explain how to select the problems that matter the most, the tools & techniques to apply and find the relevant  more...

LEADERSHIP TEAM DYNAMICS in Oil Gas 1 3 November 2011 Kuala Lumpur Malaysia This uniquely designed 3 day training course will help you overcome the challenges that you face, enabling you to optimise your success strategies. Days 1 & 2 are designed for team leaders, supervisors or managers working in a team based environment, whether you work for an operator company or for non-operator partners. Day 3 is separately bookable, and is specifically designed for those who  more...

LNG Fundamentals with Michael Williams Richard Harrison The course contrasts the technical and commercial differences between LNG and natural gas to point out benefits and constraints that arise from the LNG option. A description is given of the elements in the a gas chaina which apply to LNG and of drivers that would lead to optimisation of design and commercial operation. The range and role of relevant parties to a successful LNG project are  more...

The International Oil Gas Executive Development Program Essential Management Commercial Skills for Oil Gas Professionals This practical, intensive 5 day course aims to provide participants with a solid grounding in the principles and practices of business management that are essential when moving from an operational to a more strategic role. Where operational management is about implementing plans with known parameters, strategic management is about exercising judgement in complex environments where there is no a  more...

4th Run in Asia Application of Structural Geology in Seismic Interpretation 17 21 October 2011 Kuala Lumpur Seismic interpretation requires understanding of structural development and its interrelation with the stratigraphic system. Bias and misunderstanding have unfortunately resulted in countless dry holes. So go beyond tracing horizons and understand their context within the structural system by extracting key information from seismic surveys and other datasets. You will learn a variety of  more...

PRIMARY REMEDIAL CEMENTING TECHNOLOGY 17 21 October 2011 Kuala Lumpur Your Expert Trainer Denis Gaudet P Eng The objective of this course is to provide each participant with an understanding of all aspects of well cementing so that he or she may be able to design an appropriate cementing job for a particular situation. Primary casing cementing jobs are relied upon until abandonment. Poor quality or ineffective jobs are sometimes difficult to identify and repair. The result of imperfectly conceived and  more...

6th run in Asia LNG FUNDAMENTALS Master the Essential Commercial and Technical Forces Driving the Global LNG Value Chain 31st Oc About this training course The 21st century has been coined the century of gas. The course will address the fundamental technical and economic factors that have driven and will drive the successful development of natural gas reserves by means of an integrated liquefied natural gas (LNG) project. The current exponential growth in the use of natural gas through international trade in LNG is  more...

Oil Gas Financial Modelling Project Evaluation This 3 a day course provides a sound understanding of both the principles of financial modelling and the practical application of these to real-world Oil & Gas business scenarios through the use of spreadsheets. The course builds upon the financial modelling principles and practices learned to apply these to project evaluations. Participants improve their mastery of project evaluation  more...

BASIC ADVANCED BUDGETING FORECASTING IN OIL GAS 12 14 October 2011 To stay on top, Oil & Gas companies must constantly re-examine the budgeting and forecasting models they use in their decision making processes to ensure they are up-to-date and incorporate the latest in budgeting and forecasting best practices. Is there an opportunity to expand take advantage of the stronger price of Oil? Where can technology costs be optimised? How does a drop of 10% in  more...

Floating Production Storage Offloading Design and Technology Expert Trainer Jean - Paul Denise The number of floating production systems is set to grow from 250 units to 299 in 2011. As crude oil prices rise above USD 100 per barrel, FPSO technology is no doubt the most efficient and viable solution for offshore field development. However, with development projects going to greater depth and complexity, the big question still remains on how to drive greater efficiency from better FPSO  more...

Design of Subsea Control Systems Umbilicals Expert Faculty Jonathan E Williams PhD A reliable operation combined with accurate control and monitoring of subsea installations is essential to ensure the highest production availability, while providing a safe and environmentally friendly field operation. As subsea production stretches the boundaries through long tiebacks, and high pressures, the demand on control systems becomes even higher. This training course will look into  more...

Advanced Casing Design Expert Faculty - Dr Michael Gibson This very intensive 5 day course and has been specifically designed on an advanced level for engineers with prior experience in casing design. The course aims to participants through the key drivers behind casing design for exploration, appraisal and development wells and their associated risks, challenges and solutions. Presentation material is through the use of very detailed manuals,  more...

Upstream Petroleum Contracts and Practice in Negotiations with Fugro Robertson This course will help you develop an in-depth knowledge of the legal and contractual framework in which the upstream oil industry conducts its operations. It opens with an explanation of the geopolitical forces which shape the modern oil industry and then covers the major technical, legal/ contractual and financial/ economic/ taxation/ fiscal issues that form modern E&P agreements worldwide.  more...

Drilling Essentials for New Engineers and Non-Technical Professionals in Oil Gas 25 - 26 August 2011 By attending this 2-day industry fundamentals training course, you will better able to: Understand drilling terminology & drilling processes for completing onshore & offshore wells Appreciate major cost components of drilling operations and its impact for better project planning and management Better visualise major drilling equipment and their technical functions to promote a  more...

Drilling Essentials for New Engineers and Non-Technical Professionals in Oil Gas 17 - 18 August 2011 By attending this 2-day industry fundamentals training course, you will better able to: Understand drilling terminology & drilling processes for completing onshore & offshore wells Appreciate major cost components of drilling operations and its impact for better project planning and management Better visualise major drilling equipment and their technical functions to promote a  more...

introduction to Exploration and Production for New Engineers and Non-Technical Professionals 15th - 16th August 2011 By attending this 2-day industry fundamentals training course, you will better able to: - Appreciate the dynamics of world energy demand & supply and its impact on pricing - Understand the formation of petroleum reservoirs and basic geological considerations - Examine the exploration process to gain an overview of the technical processes involved - Gain a comprehensive overview of drilling  more...

Drilling Essentials for New Engineers and Non-Technical Professionals in Oil Gas Vietnam 22nd - 23rd August 2011 Gain an overview of drilling procedures, the terminology used, its cost components and the latest technological developments driving this activity By attending this 2-day industry fundamentals training course, you will better able to: Understand drilling terminology & drilling processes for completing onshore & offshore wells Appreciate major cost components of drilling operations  more...

Technical Report Writing Presentation Skills For Oil and Gas Professionals 10 - 12 August 2011 Oil & Gas professionals increasingly need to translate complex findings, analysis and recommendations for effective decision making. If you a face challenges in getting your findings into paper and presenting it effectively, you will benefit from this 3-day training course: EFFECTIVE TECHNICAL REPORT WRITING FOR OIL & GAS PROFESSIONALS a Write and turn-around accurate technical documents  more...

Flow Assurance for Offshore Production FOR OFFSHORE FIELD DEVELOPMENT 25 July - 29 July 2011 This training course provides an in-depth understanding of the issues to be considered in the development of offshore fields. Each day consists of lectures in the morning and a hands-on workshop in the afternoon. The workshop allows the participants to appreciate the design process associated with field developments. Various software will be available during the training course to predict  more...

Process Hazard Assessment using HAZOP Technique and HAZOP Team Leader Training with John Davies 18th July - 22nd July 2011 Course Description An intensely participative 3 day training course that will both explain the key facets of the HAZOP technique as well as provide ample opportunities for delegates to practice and become familiar with the technique using generic and real life examples. Course Description An intensely participative 2 day training course that will develop participants already familiar  more...

Gas-Lift Design Operation and Automation with Cleon Dunham 18th July - 22nd July 2011 The objective of this course is to provide the most advanced and comprehensive gas lift design and operations training available to the industry. It also emphasizes emerging technology in the form of actual gas lift valve performance and dynamic gas lift simulation, which advance the practice of gas lift from a black art to a true engineering discipline. The course will also prove valuable to  more...

OSV Chartering and Charterparty Management 18th July - 22nd July 2011 In the Offshore Oil & Gas industry, field development, hook-up and production activities are dependent on the reliable availability of a fleet of Offshore Support Vessels (OSV). Not only is the availability of OSVa ™s important, but expertise and a know howa in C/ P and or contract management is equally crucial. Understanding the essential ingredients of contracts and mastering the  more...

Applied Production Logging - Advanced Production and Through Casing Loging for Reservoir Monitoring 18July -22 July 2011 Advanced Production and Through Casing Logging For Reservoir Monitoring The following agenda is based on three morning and three afternoon sessions daily, each session approximately one to 1a 1/ 4 hours in length. These sessions are labeled M1, M2, M3, and A1, A2, and A3 respectively. Note that class problems (PROBLEMS) and movies (MOVIES) have been highlighted. Numerous log examples for class  more...

Introduction to Oil Gas Exploration Production For New Engineers Non-Technical Professionals 18-19 July 2011 By attending this 2a day industry fundamentals training course, you will better able to: - Appreciate the dynamics of world energy demand & supply and its impact on pricing - Understand the formation of petroleum reservoirs and basic geological considerations - Examine the exploration process to gain an overview of the technical processes involved - Gain a comprehensive overview of drilling  more...

Technical Report Writing Presentation Skills For Oil and Gas Professionals Effectively document and communicate your technical Oil & Gas professionals increasingly need to translate complex findings, analysis and recommendations for effective decision making. If you a face challenges in getting your findings into paper and presenting it effectively, you will benefit from this 3-day training course: EFFECTIVE TECHNICAL REPORT WRITING FOR OIL & GAS PROFESSIONALS (2-3 March 2011) a Write and turn-around accurate  more...

Technical Report Writing Presentation Skills For Oil and Gas Professionals Effectively document and communicate your technical Oil & Gas professionals increasingly need to translate complex findings, analysis and recommendations for effective decision making. If you a face challenges in getting your findings into paper and presenting it effectively, you will benefit from this 3-day training course: EFFECTIVE TECHNICAL REPORT WRITING FOR OIL & GAS PROFESSIONALS (2-3 March 2011) a Write and turn-around accurate  more...

Reliability Centered Maintenance Master Class with V Narayan 13 to 17 June 2011 Singapore Case study discussion with practical exercises and not just theoretical concepts An ability to go back to the workplace and begin to apply RCM is central to learning in this training course. In the five-days, two days will be spent on working through a complex RCM study. This work will be done in teams working through syndicate sessions. The case is on a major sub-system of a large turbine,  more...

3rd run in Asia COMPLETION DESIGN SCHOOL 27 June 1 July 2011 Kuala Lumpur This 5 day school is aimed at engineers and supervisors who already have an understanding of well construction methods, but who would benefit from a more detailed knowledge completion design. The course will concentrate on the important aspects of completion design and what makes a safe and efficient well. A common thread of practical examples are used througha out the course. The exercises  more...

Introduction to Petrophysics - Log Analysis LWD Wireline 30 May 3 June 2011 Kuala Lumpur Malaysia Petrophysics remains a vital component to many facets of the petroleum industry, from quantification of hydrocarbon reserves, developmental strategies to real-time decision making for reservoir navigation. This 5 day course addresses the fundamental tenets of petrophysics and formation evaluation, using integrative perspective of multiple datasets, including geological, geophysical, logging and  more...

TROUBLE FREE HIGH ANGLE EXTENDED REACH COMPLEX WELLS 24 26 May 2011 Kuala Lumpur Malaysia If your directional projects would benefit from reduced uncertainty and dependably lower costs, reserve your place now! Course Objectives Reduce high angle and ERD projectsa ™ drilling risk, time and cost through teaching personnel techniques developed during the planning, drilling and review of some of the worlda ™s most demanding ERD and complex wells. Show how to accurately  more...

Introduction to Oil Gas Exploration Production For New Engineers Non-Technical Professionals 30 - 31 May Singapore By attending this 2-day industry fundamentals training course, you will better able to: - Appreciate the dynamics of world energy demand & supply and its impact on pricing - Understand the formation of petroleum reservoirs and basic geological considerations - Examine the exploration process to gain an overview of the technical processes involved - Gain a comprehensive overview of drilling  more...

Image Log Interpretation 23 27 May 2011 Kuala Lumpur The dipmeter is unfortunately one of the least utilized interpretation tools available to the geoscientist, despite widespread structural and stratigraphic applications. Thus, this course is designed to provide participants with a detailed understanding of dipmeter and bore hole image acquisition, interpretation techniques, and data integration into geologic and geophysical models. Applications  more...

Essential EPC Contract Management and Law for EPC Engineers Procurement and Non-Legal Professionals in Oil Gas By attending this 3-day separately book-able intensive course, you will be able to: 1. Safeguard your interests by understanding the basics of contract law in plain English and learning simple contract language risk mitigation techniques 2. Quickly identify dangerous words/ phrases in the contracts of others that could cost your company millions 3. Effectively manage risk on your project  more...

BASIC ADVANCED BUDGETING FORECASTING IN OIL GAS 26 28 April 2011 To stay on top, Oil & Gas companies must constantly re-examine the budgeting and forecasting models they use in their decision making processes to ensure they are up-to-date and incorporate the latest in budgeting and forecasting best practices. Is there an opportunity to expand take advantage of the stronger price of Oil? Where can technology costs be optimised? How does a drop of 10% in  more...

WELL INTEGRITY MANAGEMENT 23 - 25 MAY 2011 This intensive three-day course is designed to provide participants with a thorough knowledge of well integrity management and risk assessment in producing assets. Based on the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the oil and gas industry. When to take action with a well is a critical  more...

BASIN ANALYSIS 23 - 27 May 2010 Kuala Lumpur The workshop course is intended to emphasise the practical geological applications of basin analysis studies to petroleum exploration. This course takes the trainee up to just below the level of full play fairway and petroleum systems analysis. However, it stresses the importance of basin evolution to petroleum generation, migration and accumulation. It will include worked examples in rift basins,  more...

2nd Run in Asia Introduction to Offshore Drilling Floating Production Facilities 11 - 14 April 2011 This course is intended for drilling engineers who wish to learn more of how their technology is integrated into a successful full field development. Equally it is intended for production engineers to learn more of the drilling methods which provide the wells in a field Development. The course is also suitable for both new engineers or management newly moved into field development areas and  more...

2nd Run in Asia WELL INTEGRITY MANAGEMENT 26 - 28 April 2011 Kuala Lumpur This intensive three-day course is designed to provide participants with a thorough knowledge of well integrity management and risk assessment in producing assets. Based on the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the oil and gas industry. When to take action with a well is a critical  more...

Advanced Turnaround Shutdown Outage Management 26 28 April 2011 Kuala Lumpur Malaysia A 3 day training course derived from the Turnaround Model of Excellence developed by practitioners that guarantee the reliability of your operations. The course six modules develop and expand the basic ideas of the Model of excellence and introduce some new concepts to further enhance performance. The aim of the course is to expand the knowledge and give new insights on Turnaround Management to  more...

3rd Run in Asia Subsea Pipeline Engineering 7th - 11th March 2010 Kuala Lumpur Subsea pipelines are the arteries of the offshore industry, and around the world more than 18, 000km are in service. Part of almost every project, they often form a large component of project cost. This course will provide a complete and up-to-date overview of the area of Subsea Pipeline Engineering, taking delegates through the pre-design phase, design, construction, installation, operation and  more...

LNG Fundamentals with Mike Williams and Richard Harrison 4 6 April 2011 Kuala Lumpur The 21st century has been coined the century of gas. The course will address the fundamental technical and economic factors that have driven and will drive the successful development of natural gas reserves by means of an integrated liquefied natural gas (LNG) project. The current exponential growth in the use of natural gas through international trade in LNG is explored. This 3 day course  more...

HPHT WELL ENGINEERING 28 March 1 April 2011 Kuala Lumpur Conventional HPHT (High Pressure - High Temperature) conditions (>10, 000 psi and 300 F) are becoming routine drilling targets in many basins worldwide, as exploration and production examine deeper and hotter objectives. This course will equip participants with knowledge and skills of HPHT well engineering and the components required for well planning and issues which influence successful  more...

Drilling Essentials For New Engineers Non-Technical Professionals 28 29 March Kuala Lumpur Malaysia By attending this 2-day industry fundamentals training course, you will better able to: Understand drilling terminology & drilling processes for completing onshore & offshore wells Appreciate major cost components of drilling operations and its impact for better project planning and management Better visualise major drilling equipment and their technical functions to promote a  more...

DEEPWATER WELL ENGINEERING 21 25 March 2011 Kuala Lumpur This 5 day training course examines the difficulties, challenges facing todaya ™s deepwater drilling programme designers and personnel where wells are being drilled in increasingly difficult downhole and environmental conditions. Ever increasing cost and legislation further contribute to design and operational pressures. From this training course, you will have access to potential proven  more...

Exploration Production Business Simulation 21 23 March 2011 Kuala Lumpur Malaysia This three day E&P Business Simulation training course is designed for groups working within the E&P sector to experience the process of formulating a medium term E&P Business Plan. The course will draw on technical, commercial and management skills as the teams work on building a 5-year plan for a business comprising of producing assets, appraised and unapprised discoveries, several exploration  more...

MANAGING COMPLEX PROJECTS For Oil Gas Professionals with Bob Mittelsdorf 2 - 3 March 2011 Kuala Lumpur Malaysia Are there projects that seem to be too complex to be able to handle? The myriad of stakeholders and their requirements, the multitude of variables to be identified and managed, and the way that they might all interact and create unexpected problems, can be daunting, and even overwhelming. This course shows you how to determine the level of complexity of a project, gives you an understanding of  more...

FRACTURED RESERVOIR CHARACTERISATION 28 Feb 2 March 2011 Kuala Lumpur Malaysia The course goes through the entire process of project definition, data gathering and analysis, concept definition and static and dynamic modelling iterations. This will help participants understand fractured reservoirs and define the most efficient way to model them for a given set of objectives.  more...

PROJECT MANAGEMENT For Oil Gas Professionals with Bob Mittelsdorf 28 February 1 March 2011 Kuala Lumpur Malaysia At present, project managers in the oil and gas industry have to make decisions in an environment of high levels of uncertainty and risk. Poor project management causes oil and gas companies massive losses of resources and money. In a climate of volatile oil prices, it is more important than ever to halt these losses. This interactive 2-day course will equip you with the skills and knowledge  more...

DEEPWATER DRILLING OPERATIONS 28 February 3 March 2011 Kuala Lumpur Malaysia This 4-day training course will describe the different types of deepwater drilling units, all their necessary specific equipment and techniques to spud a well ranging from 1000 to 10, 000 feet. The goal being to transmit to all participants the key technology and operational challenges with sufficient depth of knowledge on: a Floating drilling rigs (SS / DPDS) and their specific equipment for  more...

Fundamentals of Upstream Oil Gas Contracts for Engineers Procurement Professionals In a dynamic Oil & Gas market, the success of your project is dependent on the practical know-how when working with contracts. Understanding the essential ingredients of contracts and master the fundamentals that will equip you to identify vague contracts, avoid dangerous and often hidden terms, and better understand your position and your project. This three day intensive workshop that covers  more...

2nd run in Asia Negotiation Skills Techniques for Engineers and Technical Professionals 27 28 January 2011 This is a two day training course that is aimed at providing professionals in the oil & gas business with a comprehensive set of core negotiating skills. Negotiations take place in many situations e. g. between peers, manager and subordinate, company and trade unions, company and government. The skills learnt on this course will be useful in all of these situations. However the course puts a focus  more...

2nd run in Asia Maintenance of Electrical Equipment in Oil Gas Installations 24 26 January 2011 The course will provide those charged with leading electrical maintenance with the best practice know-how needed for: a Safe operation a High reliability at an optimised low cost and a a Defensible approach to reliability, availability, sparing, integrity and safety. The course balances an engineera ™s practical perspective with the demands of business needs. It meets the needs  more...

Technical Report Writing Presentation Skills For Oil and Gas Professionals 24 January 2011 - 26 January 2011 Oil & Gas professionals increasingly need to translate complex findings, analysis and recommendations for effective decision making. If you a face challenges in getting your findings into paper and presenting it effectively, you will benefit from this 3-day training course: EFFECTIVE TECHNICAL REPORT WRITING FOR OIL & GAS PROFESSIONALS a Write and turn-around accurate technical documents  more...

Fundamentals of Finance Accounting and Project Investment Analysis in Oil Gas 24 Jan 2011 - 26 Jan 2011 This 3-day separately book-able course is not designed to skill Oil & Gas engineers to be accountants, but to give participants the confidence and ability to communicate with accountants and finance managers and to improve their own financial decision making. For engineering professionals, a high level of technical expertise is no longer sufficient for superior management performance. Oil &  more...

WRITING EFFECTIVE STANDARD OPERATING PROCEDURES SOP FOR OIL GAS PROFESSIONALS ENGINEERS A Standard Operating Procedure (SOP) is a set of instructions having the force of a directive, covering those features of operations that lend themselves to a definite or standardized procedure without loss of effectiveness. The presence of these quality documents is essential when inspections take place since the most frequent reported deficiencies during inspections are the lack of written SOPs  more...

Introduction to Subsea Inspection Maintenance Repair 8th -10th December 2010 This Three Day course will give an introduction to subsea Inspection, Maintenance and Repair (IMR) as it is practiced in the offshore oil and gas industry. It will include IMR fundamentals, planning and implementation. The course attendees will learn the importance of * Subsea structural, pipeline and export system purpose and general layouts. * Subsea threats, including mechanical, marine and  more...

HPHT Well Operations 29 November 2010 - 3rd December 2010 Conventional HPHT (High Pressure - High Temperature) conditions (>10, 000 psi and 300 F) are becoming routine drilling targets in many basins worldwide, as exploration and production examine deeper and hotter objectives. This course will equip participants with knowledge and skills of HPHT well engineering and the components required for well planning and issues which influence successful  more...

LNG FUNDAMENTALS 25 - 27 October 2010 The 21st century has been coined the century of gas. The course will address the fundamental technical and economic factors that have driven and will drive the successful development of natural gas reserves by means of an integrated liquefied natural gas (LNG) project. The current exponential growth in the use of natural gas through international trade in LNG is explored.  more...

ROOT CAUSE ANALYSIS Intermediate Level 1 3 December 2010 Kuala Lumpur Malaysia Root Cause Analysis is a systematic, evidence-driven process that helps you find the true underlying (and often hidden) causes that result in unwanted events. We will see why minor failures matter, and how they can escalate out of control. In this intermediate training course, we will explain how to select the problems that matter the most, the tools & techniques to apply and find the relevant  more...

Enhanced Oil Recovery EOR Reservoir Engineering Aspects of CO2 Flooding -13 17 December 2010 Kuala Lumpur Malaysia Oil reservoirs mature and ultimately reach the limit of their economical productivity under primary management strategies. In order to extend the production life of such reservoirs, already proven improved and enhanced oil recovery techniques have to be considered. Carbon Dioxide (CO2) injection emerged as one of the most feasible process from both physical and economic aspects. This  more...

Engineering of Subsea Production Systems 14 16 December 2010 Kuala Lumpur Malaysia This concise course is well balanced and based on more than 30 years of true project experience in Shallow and Deep Water fields around the world, from concept evaluation to first production. It is designed for Project Managers, Project Engineers, experienced or new to Subsea & highly suitable for Cost, Planning, Offshore Installation and Offshore Operation Engineers.  more...

Clastic Exploration Reservoir Sedimentology 29th November - 03rd December 2010 This course has been developed to provide an understanding of the geometry and hydrocarbon potential of clastic depositional systems and facies, and how they are affected by such important features as basin configuration, tectonics and eustasy. Each of the major clastic environments is covered in terms of lithology, facies, log response and reservoir quality and the depositional models related to  more...

Subsea Pipeline Engineering 29 - 02 December 2010 Subsea pipelines are the arteries of the offshore industry, and around the world more than 18, 000km are in service. Part of almost every project, they often form a large component of project cost. This course will provide a complete and up-to-date overview of the area of Subsea Pipeline Engineering, taking delegates through the pre-design phase, design, construction, installation, operation and  more...

Finance for Non Finance Professionals in Oil Gas and Petroleum Fiscal Regimes Applied Finance for Oil and Gas Industry 29 - 01 This 3-day separately book-able course is not designed to skill Oil & Gas engineers to be accountants, but to give participants the confidence and ability to communicate with accountants and finance managers and to improve their own financial decision making. For engineering professionals, a high level of technical expertise is no longer sufficient for superior management performance. Oil &  more...

Deepwater Turbidites 25 - 26 November 2010 The course provides an opportunity to examine analogue data from turbidite reservoirs. The 2 day course will review the depositional setting, sequences that are associated with clastic deepwater systems, review the geological controls on reservoir quality and architecture, and put the environment into context of the petroleum system.  more...

Stuck Pipe Prevention Fishing 22nd - 26th November 2010 This 2 day course focuses upon how fishing can be a success first time. To maximise their learning, delegates work through actual fishing case histories and follow proven procedures and methodologies. Presentation material is through the use of the Fishing Handbook, PowerPoint, case histories, videos and digital film.  more...

Well Intervention and Productivity with Howard Crumpton This course is designed to make those that attend aware of how their job can directly impact the productivity. Early identification of problems in wells and effective interventions to fix problems can have a significant impact by minimising lost oil through formation damage and non productive time. As well as discussing best practice, time will be made available for discussion relating to specific  more...

3rd Run in Asia Application of Structural Geology in Seismic Interpretation 25 - 29 October 2010 Kuala Lumpur Seismic interpretation requires understanding of structural development and its interrelation with the stratigraphic system. Bias and misunderstanding have unfortunately resulted in countless dry holes. So go beyond tracing horizons and understand their context within the structural system by extracting key information from seismic surveys and other datasets. You will learn a variety of modern  more...

GAS-LIFT DESIGN OPERATION AUTOMATION 18 22 OCTOBER 2010 KUALA LUMPUR MALAYSIA The objective of this course is to provide the most advanced and comprehensive gas lift design and operations training available to the industry. It also emphasizes emerging technology in the form of actual gas lift valve performance and dynamic gas lift simulation, which advance the practice of gas lift from a black art to a true engineering discipline. The course will also prove valuable to  more...

GAS-LIFT DESIGN OPERATION AUTOMATION 25 29 OCTOBER 2010 BANDUNG INDONESIA The objective of this course is to provide the most advanced and comprehensive gas lift design and operations training available to the industry. It also emphasizes emerging technology in the form of actual gas lift valve performance and dynamic gas lift simulation, which advance the practice of gas lift from a black art to a true engineering discipline. The course will also prove valuable to  more...

Advanced Budgeting Foracasting in Oil Gas To stay on top, companies must constantly re-examine the budgeting and forecasting models they use in their decision making processes to ensure they are up-to-date and incorporate the latest in budgeting and forecasting best practices. Is there an opportunity to expand take advantage of a weaker competitor? Where can costs be optimised? How does a drop of 10% in oil price affect profit? To  more...

Oil Gas Finance Modelling and Project Management 4th to 6th October 2010 This 3 a day course provides a sound understanding of both the principles of financial modelling and the practical application of these to real-world Oil & Gas business scenarios through the use of spreadsheets. The course builds upon the financial modelling principles and practices learned to apply these to project evaluations. Participants improve their mastery of project evaluation  more...

ADVANCED CASING DESIGN 27 Sep 1 Oct 2010 Kuala Lumpur This very intensive 5 day course and has been specifically designed on an advanced level for engineers with prior experience in casing design. The course aims to participants through the key drivers behind casing design for exploration, appraisal and development wells and their associated risks, challenges and solutions. Presentation material is through the use of very detailed manuals,  more...

INTERNATIONAL PETROLEUM CONTRACTS PRACTICE IN NEGOTIATIONS 29 September - 1 October 2010 Kuala Lumpur Malaysia You will learn the philosophy, evolution and fundamentals of international petroleum contracts. You will take part in life-like negotiating sessions mastering many negotiating techniques, where a mistake is a learning experience not a disaster. This course will help you develop an in-depth knowledge of the legal and contractual framework in which the upstream oil industry conducts its  more...

Offshore Drilling Production Facilities 30 August 1 September 2010 Ho Chi Minh City This course is intended for new drilling and production crew. The course is also suitable for both senior engineers and management professionals moving into field development responsibility for the first time. It is also suitable for other professionals supporting field development activities in the geosciences arena. Individuals who require a basic understanding of integrated field  more...

Introduction to DEVELOPMENT GEOLOGY 27 28 September 2010 Kuala Lumpur Malaysia Course Description A profitable development of an Oil & Gas field starts with a good understanding of the subsurface. The development then continues with integrated field management in which geology plays an essential role. In this course the a development life cyclea from the gathering of geological data, the interpretation thereof, and the preparation of geological models and the  more...

Introduction to Natural Gas Engineering 27 September 1 October 2010 Kuala Lumpur Malaysia Course Description This intensive one week short course is structured to provide training in the practical aspects of natural gas engineering and operations and the use of this background in analyzing a number of typical field problems. In the early part of the course gas reservoir engineering fundamentals, estimation of gas reserves, and calculations of gas well deliverability are covered.  more...

Field Development Project Management 2 - 3 September Kuala Lumpur Project management is rapidly becoming more complex in the Oil & Gas business today. Project managers need to constantly deal with turbulent oil prices, new technology, tedious regulatory requirements, inadequate human resources capability and financial support when rolling-out new fields for development. This 2 day training course address these practical challenges that project managers face  more...

OSV Chartering Contract Management with Essential Elements of Maritime Law 26 30 July 2010 Kuala Lumpur Malaysia - 3rd Run The 5 modules that will be covered during the course are the following: 1. Principles of Contract Laws, Maritime Laws and relevance to OSV Charters 2. Contents of C/ P Agreement and Standard Forms for OSVs 3. Interpretation of Each Clause in the C/ P Form 4. Post Fixture Challenges, Insurances and Liabilities 5. Dispute Resolution a Mediation, Litigation or Arbitration? *Sign up today and  more...

Applied Production Logging Cased Hole Production Log Evaluation,Kuala Lumpur, Malaysia a 3rd run in KL About The Course: This two-day program is a comprehensive and up-to-date course covering the new and traditional wireline diagnostic techniques for production log surveillance of cased wells. Dr. Smolena ™s 1996 book, Cased Hole and Production Log Evaluation, plus a loose-leaf workbook, are provided to participants of this program. Participants Will Be Able To: * identify if formation  more...

Subsurface Mapping in Exploration Development Course Objectives: Course is practically based, including integrating multiple datasets, quick-look and advanced techniques for critically analyzing/ reviewing key maps (including your own and those of others), and benefits or drawbacks of modern computing. Course is designed from an applied standpoint, with numerous examples and hands-on exercises from the petroleum industry.  more...

Training to Reduce Unscheduled Events (T.R.U.E) This highly acknowledged 5 day training course promotes the reduction of downtime in rig operations. It aspires to increase the understanding of this occurrence and the causes behind it. The course examines in detail how to develop a well and its rig specific action plan in order to create a clear plan to control escalating costs.  more...

WELL INTEGRITY MANAGEMENT This intensive three-day course is designed to provide participants with a thorough knowledge of well integrity management and risk assessment in producing assets. Based on the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the oil and gas industry.  more...

FLOW ASSURANCE For Offshore Field Development Course Objectives: This training course provides an in-depth understanding of the issues to be considered in the development of offshore fields. Each day consists of lectures in the morning and a hands-on workshop in the afternoon. The workshop allows the participants to appreciate the design process associated with field developments. Various software will be available during the training  more...

2nd run in Asia! COMPLETION DESIGN SCHOOL This course is aimed at engineers and supervisors who already have an understanding of well construction methods, but who would benefit from a more detailed knowledge completion design. The course will concentrate on the important aspects of completion design and what makes a safe and efficient well. A common thread of practical examples are used through-out the course.  more...

Upstream Petroleum Economics and Risk Analysis With Fugro Robertson This separately book-able 5 day course describes the fundamentals of international oil & gas asset valuation and economic risk assessment and is designed to enhance the contribution that delegates make to investment decision mechanisms in their partnerships within industry. It describes the theories and practices of discounted cash flow applied in the global oil industry to exploration  more...

VSTO Visual Studio Tools for Office using Visual Basic Microsoft would much rather that everyone stopped writing code within Excel, Word and Outlook using VBA, and switched to using Visto (VSTO, or to give it its full name, Microsoft Visual Tools for Office) instead. This three-day course allows you to do just that! VSTO - Visual Basic training course (3 days) You will find the course easier if you have already done some programming in VBA, however  more...

VSTO Visual Studio Tools for Office using C# Sharp Visual Studio Tools for Office (abbreviated to VSTO, and affectionately known as VSTO) is the application Microsoft want you to use to program within Microsoft Office. If you want to see what the future holds for VBA, find out on this three-day course! This course uses C# as a programming language.  more...

SSAS 2008 R2 Sql Server Analysis Services Do you have data sitting in your corporate SQL Server database, but not know how to make use of it? If you already know SQL, maybe it s time to learn about multi-dimensional reporting using cubes. Speed up your reports, analyse your KPIs and improve your data-mining with SQL Server Analysis Services. This course concentrates on practical teaching and exercises, to allow you to create and modify  more...

SSRS 2008 R2 Sql Server Reporting Services SQL Server Reporting Services 2008 R2 is THE way to publish reports to your corporate intranet. Not only can you include tables of data, matrices (you may know these as pivot tables), charts, lists and subreports, but SSRS 2008 R2 also includes whizzy new report items like indicators, gauges and sparklines. On this three-day course you will use SQL Server 2008 R2 Business Intelligence Development  more...

Microsoft PowerPoint 2010 Introduction This one-day course shows you how to create presentations in PowerPoint. Learn how to use templates, draw, animate your presentations and add exciting transition effects! To attend this course you must already know how to use Windows. There will be a maximum of 6 people on each course, and each person will have their own computer.  more...

Microsoft Excel 2010 Introduction New to Excel 2010? This is the perfect place to start. This one-day course shows you all the basics of Excel: creating formulae, formatting your worksheets, printing your work, creating charts and (if time allows, which it usually does) sorting and filtering tables of data. This course is suitable for those who are new to Excel.  more...