|
Training Classes
| Learning and Development Resources
| Training Directory
| New Training Seminars
| New Training Providers
| Site Map
| Promote Training Seminars
|
Training Keywords
| Training Seminars
| Training Providers
| Regions
|
| Advertise Training Seminars
| Login
|
||||||||||
Custom Search
Device Training Seminars and Classes
From LearningMeasure.com
Basic RF and Microwave Power Measurement
 ...of RF and microwave power measurements. First some of the devices used to measure power are briefly described, then the basic power measurement is described, including the effects of mismatches due to reflections in the measurement system on the measured power. Also the measurement of power through a two-port device is covered. Finally this course discusses in a fair amount of detail how to more...
From Serebra Learning Corporation
A+ Certification Part 6 - Troubleshooting and Preventive Maintenance
  This is the sixth course in a seven part series that presents students with both theoretical and practical instruction on procedures for installing, configuring, and upgrading Windows 9X and Windows 2000. The course will also cover system boot sequences and boot methods, along with procedures for adding and configuring device drivers, applications and software for specified devices. more...z/OS for Operators Curriculum
... Support SMF - System Management Facilities DDR - Dynamic Device Reconfiguration MIH - Missing Interrupt Handler System Generation & IPL's Duration 3 - 4 hours Prerequisites Basic understanding of Data Processing concepts and successful completion of Datatrain s z/OS Architecture & Concepts and MVS Controls & Processes Courses, or similar Objectives After completing this Course, the student more...Cisco Interconnecting Network Devices Part 1: Establishing Workgroups
...s' instructor-led training, Interconnecting Cisco Network Devices (ICND 1.0). In this series, the concepts, commands, and practice required to configure Cisco switches and routers in multiprotocol internetworks are covered. Installation, configuration, and troubleshooting information and practice that technical support people require to install and configure Cisco switches and routers are also more...Supporting Microsoft Windows 95: Installation and Configuration
This is the first course in a four part series for Systems Engineers who intend to install, configure, customize, optimize, maintain, and troubleshoot the Microsoft Windows 95 operating system. This series aims to enable the professionals to pass Microsoft exam 70-064, Implementing and Supporting Microsoft Windows 95. more...Java 2 Programming Part 1: The Java Language
...ifferent kinds of computers, consumer products, and other devices. Java software works on any device from mobile phones to supercomputers and is incorporated into all major Web browsers. This first course in the series is designed to give students a basic understanding of Java 2. It provides the knowledge needed to compile, run and distribute a simple Java application. It teaches the features more...Java 2 Programming Part 2: Objects and Classes
This is the second course in a five-part series on Java 2 Programming. The Java platform is based on the idea that the same software should run on many different kinds of computers, consumer products, and other devices. Java software works on any device from mobile phones to supercomputers and is incorporated into all major Web browsers. This course teaches learners the general concepts of more...Java 2 Programming Part 3: Core Language APIs, Threads, and Exceptions
This is the third course in a five-part series on Java 2 Programming. The Java platform is based on the idea that the same software should run on many different kinds of computers, consumer goods, and other devices. Java software works on any device from mobile phones to supercomputers and is incorporated into all major Web browsers. This course covers the function of packages in Java, including more...Java 2 Programming Part 4: Building and Managing GUIs
This is the fourth course in a five-part series on Java 2 Programming. The Java platform is based on the idea that the same software should run on many different kinds of computers, consumer products, and other devices. Java software works on any device from mobile phones to supercomputers and is incorporated into all major Web browsers. This course covers using the java.awt package and creating more...Java 2 Programming Part 5: Streams and Networking
This is the final course in a five-part series on Java 2 Programming. The Java platform is based on the idea that the same software should run on many different kinds of computers, consumer products, and other devices. Java software works on any device from mobile phones to supercomputers and is incorporated into all major Web browsers. This course teaches learners advanced topics that will help more...The OSI Model
Upon completing this WestNet e-Learning module, you will be able to explain why the OSI model was created; name and understand the layers of the OSI reference model; and, describe what an open standard is and why it benefits both vendors and customers. more...Overview of Layers and Layer 1 Devices
In this WestNet e-Learning module, we review the layers of the Open Systems Interconnection (OSI) reference model, functions of each layer, and internetworking devices that perform each of the functions. We will begin a detailed discussion of the devices found at the Physical Layer of the OSI model. more...Cisco IP Phones and CallManager Configuration
To explain how to compare IP Phones and functions and configure Cisco CallManager to support IP phones IT professionals responsible for installing, configuring, and maintaining the ongoing administration of a Cisco IP telephony solution; candidates preparing for the Cisco IP Telephony exam (642-444 CIPT) more...Visual Basic 6 0 Using the Win32 API Part II
...rawing functions, it explains how to obtain and release a device context and how to draw dots, lines, and rectangles on a form or control. It also describes how to change pen and brush styles by using stock objects and by creating customized pens and brushes. In addition, it explains how to place a text string on a control or form using pixel coordinates. This course also describes the more...XML and Mobile Web Applications with C 2005 and ASP NET 2 0
To read, validate, and write data in XML documents, to read data, write data, and handle events in the XML Document Object Model (DOM), and to create custom mobile web applications Individuals who wish to use the .NET Framework 2.0 with Visual Studio 2005, C# 2005, and ASP.NET 2.0 to develop web-based client applications; individuals preparing for the Microsoft .NET Framework 2.0 Web-Based Client more...XML and Mobile Web Applications with Visual Basic 2005 and ASP NET 2 0
To read, validate, and write data in XML documents, to read data, write data, and handle events in the XML Document Object Model (DOM), and to create custom mobile web applications Individuals who wish to use the .NET Framework 2.0 with Visual Studio 2005, Visual Basic 2005, and ASP.NET 2.0 to develop web-based client applications; individuals preparing for the Microsoft .NET Framework 2.0 more...Win2000 Professional Managing Hardware Devices
... will learn to install, operate, and manage MCSE hardware devices. You will be introduced to the procedure for installing and configuring Plug and Play devices. You will learn to unplug hardware devices, sign device drivers digitally, and verify file signatures. You will find out how to monitor and configure DVD and CD-ROM devices and removable media, such as tape devices. You will become more...Win2000 Server Managing Hardware Devices Drivers
... will learn to install, operate, and manage MCSE hardware devices. You will be introduced to the procedure for installing and configuring Plug and Play devices. You will learn to unplug hardware devices, sign device drivers digitally, and verify file signatures. You will find out how to monitor and configure DVD and CD-ROM devices and removable media, such as tape devices. You will become more...Diagnosing and Troubleshooting
To demonstate procedures for isolating and troubleshooting computer problems Anyone wanting to become a hardware support technician more...Operating Systems
To recognize the fundamentals of operating system technologies and the basic procedures involved in installing and upgrading operating systems. The for this path includes entry-level computer technicians who will, by the end of studying this path and before taking the exam, have accumulated 500 hours hand-on experience in a lab or in the field more...JES2 Job and Device Control I
This course describes the functions performed by MVS and JES2 in managing a computer system and how time-sharing users, batch users, and operators communicate their requirements to JES2 and MVS. Students will learn to identify the services performed by JES2 during each of the six phases of job processing as well as identify the manual required to find more information about a given command or more...JES2 Job and Device Control II
...r operations in an MVS JES2 environment. It describes the devices controlled by JES2, explains how to determine which devices connected to the computer system are under the control of JES2 and describes the status of JES2 commands to control device status. The course examines the commands used to control JES2 printers, describes the setup requirements that can be specified for a SYSOUT dataset more...Wireless LAN Infrastructure Devices
This module covers the different categories of wireless network infrastructure equipment and some of the variations within each category. more...Antennas and Accessories
In this module, we will discuss the proper methods for installing each kind of antenna. We will explain polarization, coverage patterns, and appropriate uses of antennas. Additionally, we describe the many different items that are used to connect antennas to other wireless LAN hardware. more...Bluetooth and HomeRF
To describe and discuss the major issues surrounding Bluetooth and HomeRF technology, their respective architectures, functionalities, and application environments Technical professionals; IT and business managers who need to learn about current and future mobile wireless technologies; students studying or researching wireless communications and cell-phone technologies more...Analyzing the Network
This module covers network performance concepts, estimating traffic volumes and patterns, taking baseline measurements of LAN traffic, and developing a traffic specification document. more...Using Internetworking Devices to Design Networks
This WestNet e-Learning module examines internetworking devices as they work together in networks and explains widely used approaches to common networking problems. more...Configuring Cisco Catalyst Switch Operations
To discuss and implement specific bridging and VLAN Catalyst switch configurations, which provide for scalability, security, and enhanced management of the local area switched network Network administrators responsible for implementing and managing small and medium-sized business networks; network technicians who install network devices in small business environments; Cisco channel resellers who more...Extending a Cisco Network to a WAN
To describe the implementation and configuration of the different technologies used on Cisco devices to enable wide area connections Network administrators responsible for implementing and managing small and medium-sized business networks; network technicians who install network devices in small business environments; Cisco channel resellers who are new to Cisco products and services more...Cisco CallManager Fundamentals
To explain how to deploy a Cisco CallManager server in a cluster using a supported IP telephony deployment model IT professionals responsible for installing, configuring, and maintaining the ongoing administration of a Cisco IP telephony solution; candidates preparing for the Cisco IP Telephony exam (642-444 CIPT) more...Adding Users to Cisco CallManager
To explain how to use Cisco CallManager to add users, associate devices to users, and customize Cisco IP phones IT professionals responsible for installing, configuring, and maintaining the ongoing administration of a Cisco IP telephony solution; candidates preparing for the Cisco IP Telephony exam (642-444 CIPT) more...Configuring Media Resources and Softkey Templates
To explain how to use Cisco CallManager to install, configure, and manage media resources, and how to modify standard softkey templates and apply them to Cisco IP phones IT professionals responsible for installing, configuring, and maintaining the ongoing administration of a Cisco IP telephony solution; candidates preparing for the Cisco IP Telephony exam (642-444 CIPT) more...Operation and Configuration of Cisco IOS Switches
...ools to establish connectivity to the appropriate network device in order to complete initial switch configurations and to verify the default configuration and status of switch devices Individuals new to networking concepts and terminology; individuals preparing to take the Interconnecting Cisco Network Devices (ICND) learning path; anyone preparing for the Introduction to Cisco Networking more...Managing the Cisco Network Environment
...devices on a network and enable connections to these devices Individuals new to networking concepts and terminology; individuals preparing to take the Interconnecting Cisco Network Devices (ICND) learning path; anyone preparing for the Introduction to Cisco Networking Technologies (INTRO) exam, the Interconnecting Cisco Network Devices (ICND) exam, or the Cisco Certified Network Associate more...Cisco ISCW 1 0 Configuring the CPE and Verifying Broadband ADSL
To configure a network of hosts over a bridging DSL CPE access device to an aggregate router and verify broadband ADSL configurations for Layer 1 and Layer 2 Network administrators; network engineers; network managers; systems managers; network designers who wish to validate their ability to install, configure and troubleshoot converged local and wide area networks with 100 to 500 nodes more...Cisco Router and Security Device Manager
To recognize how to install and configure SDM on a Cisco router The primary target includes network designers, network administrators, network engineers, and system engineers. more...Cisco BCMSN 3 0 Implementing High Availability In a Campus Environment
To implement high availability technologies and techniques using multilayer switches in a campus environment. Network administrators, network engineers, network managers, systems managers, or network designers. more...IP Phones and CallManager Configuration
To select the most appropriate IP Telephony endpoints for a Cisco IP Telephony solution and configure Cisco CallManager to support IP Phones using the CallManager Configuration tool IT professionals responsible for installing, configuring, and maintaining the ongoing administration of a Cisco IP Telephony solution; candidates preparing for the Cisco IP Telephony exam (642-444 CIPT) more...Configuring Media Resources and Adding Users
To configure and manage media resources in Cisco CallManager and add users and use Cisco CallManager to configure user options and settings for Cisco IP Phones in an IP Telephony network. IT professionals responsible for installing, configuring, and maintaining the ongoing administration of a Cisco IP Telephony solution; candidates preparing for the Cisco IP Telephony exam (642-444 CIPT) more...Getting Started with a Palm Handheld Device
To explore the basic functionality of the Palm handheld device running Palm OS 4 Users of Palm handheld devices running Palm OS 4 as their operating system more...Getting Started with Pocket PC 2002
To explore the basic functionality of the Pocket PC 2002 Users of handheld devices running Pocket PC 2002 as the operating system more...Win2000 Professional for End-Users Advanced Features
This course covers the concepts and exercises required to provide the learner with the knowledge and skills necessary to use some advanced features in Windows 2000 Professional. The course explains how to modify advanced Control Panel settings, install and uninstall programs and hardware, and use mobile desktop support features. The course also describes how to use system tools to backup data, more...Advanced Design Techniques and Printing with Publisher 2003
To provide an overview of advanced design techniques and printing in Publisher 2003 Office personnel at all levels; those wishing to become familiar with Publisher 2003 more...PDA and Pocket PC Fundamentals
This course is designed for new owners of handheld devices running the Pocket PC 2002 operating system. After taking this course, learners should be able to use their Pocket PC as an effective business and entertainment device. Users of handheld devices running Pocket PC 2002 as the operating system. more...Basic Troubleshooting
This introduction to troubleshooting covers some common problems and their solutions. It covers problems related to monitors, drives, printing, sound and video, and start up and shut down of the computer. Simple troubleshooting techniques are also discussed. A computer user who is interested in learning how to troubleshoot simple computer problems. more...MusicMatch Jukebox 8 2
This course will introduce the Musicmatch software and its features and benefits. The course will describe the basic functionality of the software. It will also cover the steps of how to copy tracks from an audio CD, download music tracks from the Internet, and launch the online radio. The other processes that will be covered include burning a disc, transferring music to a portable device, and more...Switching Fundamentals
...in and broadcast domain which describe network access and device functionality. Bridging and switching is discussed in Lesson 2. Although different in how they operate both devices learn and store MAC address information to make filter and for-ward decisions. Also discussed are redundant network topologies the potential for active loops and how the Spanning Tree Protocol (STP) helps prevent more...Configuring and Operating Cisco IOS Devices
...rating System (IOS) found on most Cisco switch and router devices. It also discusses the general bootup process connecting to a device and gaining access to the command line through user EXEC and then privileged EXEC modes. The information in Lesson 2 is specific to Catalyst switch startup initial configuration and basic commands. Lesson 3 prepares you to use the command line interface on a more...Managing the Network Environment
...e Cisco proprietary protocol used to identify neighboring devices. Cisco Discovery Protocol (CDP) is topology and protocol independent and is an effective way to document network infrastructures. Lesson 2 highlights Telnet which is used to provide remote console connections to a network device for administration purposes. Lesson 3 is an important topic about the router hardware components and more...CompTIA A+ 2003 Hardware Part 2 - Installation and Troubleshooting
This course teaches about SCSCI devices and how to configure Bus Architecture. Participants learn about internal and peripheral device installation and upgrade. Finally guidelines for problem isolation diagnostics and troubleshooting are taught. more...CompTIA A+ 2003 OS Technologies Part 2 Configuring and Managing
This course will present instruction on system interfaces and the underlying command-line functions and utilities to manage the major operating systems. Learners will be introduced to the concepts and procedures for managing disks file systems and files along with procedures for adding and configuring device drivers. more...MS SQL Server 2000: Database Administration Part 3: Security and Data Recovery
This is the third course in a five part series that deals with the backup and restore strategies for SQL Server 2000 and with managing security and permissions with SQL Server 2000. more...CompTIA A+ 2003 Hardware Part 2 - Installation and Troubleshooting
This course teaches about SCSCI devices and how to configure Bus Architecture. Participants learn about internal and peripheral device installation and upgrade. Finally, guidelines for problem isolation, diagnostics and troubleshooting are taught. more...CompTIA A+ 2003 OS Technologies Part 2 Configuring and Managing
This course will present instruction on system interfaces and the underlying command-line functions and utilities to manage the major operating systems. Learners will be introduced to the concepts and procedures for managing disks, file systems, and files, along with procedures for adding and configuring device drivers. more...Cisco Interconnecting Network Devices Part 1: Establishing Workgroups
...s' instructor-led training, Interconnecting Cisco Network Devices (ICND 1.0). In this series, the concepts, commands, and practice required to configure Cisco switches and routers in multiprotocol internetworks are covered. Installation, configuration, and troubleshooting information and practice that technical support people require to install and configure Cisco switches and routers are also more...Microsoft Windows 2000 Installation, Configuration, and Administration Part 2: File System and Hard
This is the second course in an eight-part series that will provide IT professionals with the knowledge and skills necessary to implement, administer, and troubleshoot Microsoft Windows 2000 Professional and Server. At the completion of this course, students will learn to configure the Microsoft Windows 2000 environment; configure and manage storage devices, file systems, and volumes; and more...Microsoft Windows XP Administration Part 4: Remote and Mobile Computing
This is the fourth course in a five part series in the Microsoft Windows XP Installation and Administration curriculum. It covers how to configure inbound and outbound connections and authentication protocols for Microsoft Windows XP Professional. It discusses how to configure and use Remote Desktop. Topics teaching how to configure and support Microsoft Windows XP Professional for mobile more...A+ Certification Part 6 - Troubleshooting and Preventive Maintenance
This is the sixth course in a seven part series that presents students with both theoretical and practical instruction on procedures for installing, configuring, and upgrading Windows 9X and Windows 2000. The course will also cover system boot sequences and boot methods, along with procedures for adding and configuring device drivers, applications and software for specified devices. more...Server+ Certification Part 1: Installation and Configuration
The is first course in a four part series on CompTIA's Server+ certification. This course presents students with guidelines for conducting pre-installation planning activities. They will also learn how to install hardware using ESD best practices, the basics of server configuration and the features of the different operating systems. It also covers the load placed on a server when you run more...Server+ Certification Part 2: Upgrading
The is the second course in a four-part series on CompTIA's Server+ Certification. This course covers performing different types of backups and how to verify that a backup has taken place. Different types of upgrades that can be performed, such as adding a processor and hard drive, increasing memory, upgrading BIOS/firmware are covered. In addition, upgrading both internal and external peripheral more...Microsoft Windows 2000 Installation, Configuration, and Administration Part 2: File System and Hard
This is the second course in an eight-part series that will provide IT professionals with the knowledge and skills necessary to implement, administer, and troubleshoot Microsoft Windows 2000 Professional and Server. At the completion of this course, students will learn to configure the Microsoft Windows 2000 environment; configure and manage storage devices, file systems, and volumes; and more...
From WDSGlobal
Vista Part 1 Introduction
Vista Part 1 - Introduction explains the developments behind MS Vista, the different editions and what they mean to a user plus many different aspects of the features including the new Vista interface.
It provides an overview of Microsoft Vista for any individual looking to use, sell or support the most advanced PC based Microsoft operating system to date.
This introductory course ensures that more...
From 123-CBT Computer Based Training
Windows 2000 Installation Config Admin --Part 7 Enterprise Networking
 ...etwork adapter. Configure a network adapter by using the Device Manager window. Identify the corrective action to be taken to solve a problem with an installed network adapter by using the specified information. Identify the features of the Windows 2000 network protocols. Install a network protocol by using the Network and Dial-up Connections window. Identify the tab that is used to more...Windows 2000 Installation Config Admin --Part 7 Enterprise Networking
...etwork adapter. Configure a network adapter by using the Device Manager window. Identify the corrective action to be taken to solve a problem with an installed network adapter by using the specified information. Identify the features of the Windows 2000 network protocols. Install a network protocol by using the Network and Dial-up Connections window. Identify the tab that is used to more...Windows 2000 Installation Config Admin --Part 4 Enterprise Admin
...and Managing Duration: 3 - 4 Hour(s) Prepare a fax device for sending a fax by using Control Panel. Send a fax by using Send Fax Wizard. Create a cover page for a fax by using the Fax Cover Page Editor. Manage a fax queue by using the taskbar. Identify the uses of the Fax Service Management utility. Set the fax device to receive a fax by using the Fax Service Management utility. more...Windows 2000 Installation Config Admin --Part 4 Enterprise Admin
...and Managing Duration: 3 - 4 Hour(s) Prepare a fax device for sending a fax by using Control Panel. Send a fax by using Send Fax Wizard. Create a cover page for a fax by using the Fax Cover Page Editor. Manage a fax queue by using the taskbar. Identify the uses of the Fax Service Management utility. Set the fax device to receive a fax by using the Fax Service Management utility. more...Windows 2000 Install Config Admin --Part 2 File Sys Hardware Config
...ft Windows 2000 environment; configure and manage storage devices, file systems, and volumes; and configure advanced devices in Windows 2000. L earn To: Install hardware and configure Microsoft Windows 2000 environment. Configure and manage storage devices, file systems, and volumes. Configure advanced devices in Windows 2000. C ontent Emphasis Skills-Based A udience more...Windows 2000 Install Config Admin --Part 2 File Sys Hardware Config
...ft Windows 2000 environment; configure and manage storage devices, file systems, and volumes; and configure advanced devices in Windows 2000. L earn To: Install hardware and configure Microsoft Windows 2000 environment. Configure and manage storage devices, file systems, and volumes. Configure advanced devices in Windows 2000. C ontent Emphasis Skills-Based A udience more...Windows 2000 Administration--Part 2 Groups Resource Mgmt
Course Overview This course provides the student with the knowledge necessary to use groups to organize user accounts. It also provides students with the knowledge and skills necessary to administer file and printer resources. L earn To: Use Groups to Organize User Accounts. Administer File Resources. Administer Print Resources. C ontent Emphasis Skills-Based A udience more...Windows NT 4 0 Core Technologies Support - Part 3
...ctions of the boundary layers in the I/O Manager: Network Device Interface Specification (NDIS) 4.0. Transport Driver Interface (TDI). Identify the technology components of the Internet and the advantages of the Intranet. Unit 3: Network Protocols Configuration Duration: 1 - 2 Hour(s) Identify the features of the Transmission Control Protocol/Internet Protocol (TCP/IP). Install the more...NetWare 5 Advanced Administration - Part 3
... that will be backed up.
Perform the steps to select the device which will store the file system backup data.
Perform the steps to select the device which will store the file system backup data.
Perform the steps to submit a file system backup job.
Perform the steps to submit a Novell Directory Services (NDS) backup job.
Perform the steps to complete a backup procedure.
Perform the steps more...NetWare 5 Advanced Administration - Part 3
... that will be backed up.
Perform the steps to select the device which will store the file system backup data.
Perform the steps to select the device which will store the file system backup data.
Perform the steps to submit a file system backup job.
Perform the steps to submit a Novell Directory Services (NDS) backup job.
Perform the steps to complete a backup procedure.
Perform the steps more...Introduction to Microsoft Works Suite 2005
This course will provide the learners with a basic understanding of Microsoft Works Suite 2005. It will enable them to use Works as a handy all-in-one tool that has an option for every task. With the basic knowledge of Works, learners will be able to accomplish various tasks using the collection of programs provided by Works.
Learn To:
Open the Works Task Launcher from the Start menu. more...Windows 2000 New Features
...fy the features of WDM. Identify the features of Network Device Interface. Unit 2: Windows 2000 Additional Features Duration: 2 Hour(s) Identify the uses of the Windows 2000 file systems. Identify the functions of disk quota management in Windows 2000. Identify the features of the Encrypted File System process. Identify disk management tools in MMC. Identify the attributes of more...NetWare Service and Support Upgrade - Part 5
...ack on a NetWare 5 server.
Identify the functions of the device drivers used by NetWare.
Load an NetWare Loadable Module (NLM) on a NetWare 5 server.
Identify the causes of the two types of errors that generate abend messages.
Configure SET parameters to allow the server to recover from abends automatically.
Identify the information displayed in an abend message.
Identify the causes of more...Cisco Networking Technologies Introduction Part 4
...ocode components contained in ROM.
Identify how a Cisco device locates and loads Cisco IOS and configuration files.
Identify guidelines for displaying and changing the configuration register.
Identify commands for displaying the running and start-up configuration files.
Identify file systems used by a router.
Identify commands used to create a backup IOS image.
Identify the command more...Windows 2000 Administration--Part 2 Groups Resource Mgmt
Course Overview This course provides the student with the knowledge necessary to use groups to organize user accounts. It also provides students with the knowledge and skills necessary to administer file and printer resources. L earn To: Use Groups to Organize User Accounts. Administer File Resources. Administer Print Resources. C ontent Emphasis Skills-Based A udience more...IBM AIX--Part 2 Network Administration
...e functions of tty terminals on AIX. Identify the serial device settings that can be configured with SMIT and WSM. Configure an AIX terminal. Identify management options for the CDE and X-windows. Unit 2: Network Connections Duration: 2 - 3 Hour(s) Identify network configuration options. Set up a network by using System Management Interface Tool (SMIT). Identify the features of more...MS Win XP Install Admin Part 1 Install Config
...inally, it covers how to install and support new hardware devices on a computer running Microsoft Windows XP Professional, and provides the knowledge needed to maintain and troubleshoot hardware devices. Learn To: o Identify methods for determining whether system hardware and software are compatible with Windows XP Professional. o Identify factors that dictate which file system to select more...MS Win XP Install Admin Part 3 TCP IP NOS Environments
...ign a static Internet Protocol (IP) address for a network device in Windows XP Professional. o Identify the different methods of assigning an alternate dynamic Internet Protocol (IP) address to a network device. o Automate Internet Protocol (IP) address assignment in Windows XP Professional by changing from static to dynamic IP addressing. o Identify features of user-friendly names used more...MS Win XP Install Admin Part 3 TCP IP NOS Environments
...ign a static Internet Protocol (IP) address for a network device in Windows XP Professional. o Identify the different methods of assigning an alternate dynamic Internet Protocol (IP) address to a network device. o Automate Internet Protocol (IP) address assignment in Windows XP Professional by changing from static to dynamic IP addressing. o Identify features of user-friendly names used more...MS Win XP Install Admin Part 4 Remote Mobile Computing
...ws XP Professional. Unit 3: Printers, Faxes, and Other Devices 2 hours o Identify Add Printer Wizard options that can be selected when manually installing a local printer in Windows XP Professional. o Identify Add Printer Wizard options that can be selected when manually installing a local printer in Windows XP Professional. o Identify Add Printer Wizard options that can be selected more...A 2003 Part 2 Install Troubleshooting
...devices and how to configure Bus Architecture. Participants learn about internal and peripheral device installation and upgrade. Finally, guidelines for problem isolation, diagnostics and troubleshooting are taught. Learn To To identify the components required for Plug and Play (PnP) technology to work. To sequence the steps to install more...Works 2003 Introduction
...uidelines for synchronizing your computer with a handheld device. Identify features of Search Companion. Identify features of Internet Explorer. Identify features of Outlook Express. Identify features of Works Calendar. Identify features of Address Book. more...Understanding Wireless Sol Part 3 WWANs Wireless Security
...work (WWAN) solution. Match mobile device categories with their features. Identify features of First Generation (1G) technology. Identify ways in which Global System for Mobile Communications (GSM) technology contributed to the worldwide deployment of Second Generation (2G) networks. Identify features more...HIPPA Security Awareness Part 2 Security Safeguards for Practitioners
... To identify requirements for device and media control. To identify factors to consider when performing risk analysis. To identify guidelines for managing risk. To identify key areas for the review of activity in information systems. Audience All managers, officers, and more...Team Conflict Working in Diversified Teams
...to market Icon's new Web TVXD (Web Television Exploration Device) in the upcoming Regional Consumer Electronics Show. Specifically, the team needs to address what activities are going to take place at the TVXD booth. Each of your teammates has different ideas about what needs to happen, and this makes conflict highly likely in the meeting. You must ensure that the meeting ends with a strategy more...Windows 2000 Upgrading from Windows NT 4 0--Part 4
...e steps to diagnose and solve an upgrade-related hardware device failure problem. o Identify the causes and solutions of a domain name problem during upgrade from Windows NT 4.0 to Windows 2000. o Identify the steps to troubleshoot a third-party tool problem. o Troubleshoot a domain upgrade failure problem. o Identify the steps to diagnose and solve a logon script problem. o Identify the more...Windows 2000 Upgrading from Windows NT 4 0--Part 4
...e steps to diagnose and solve an upgrade-related hardware device failure problem. o Identify the causes and solutions of a domain name problem during upgrade from Windows NT 4.0 to Windows 2000. o Identify the steps to troubleshoot a third-party tool problem. o Troubleshoot a domain upgrade failure problem. o Identify the steps to diagnose and solve a logon script problem. o Identify the more...A 2003 OS Technologies Part 2 Configuring Managing
...d files, along with procedures for adding and configuring device drivers. Learn To To identify key features of Windows desktops. To identify features of Windows Explorer. To match Control Panel utilities with their functions. To identify methods for opening and closing a command more...A 2003 OS Technologies Part 3 Troubleshooting
This course presents students with both theoretical and practical instruction on procedures for diagnosing and troubleshooting common operating system problems. Problems with the installation and startup processes, resources for troubleshooting, common problems will all be presented. This course will also cover managing the registry, system files, and memory. Learn To more...CompTIA Linux 2004 Hardware Documentation
...missions/software configurations and manage local storage devices and network protocols. When all five courses are taken in the Linux+ series (16260, 16261, 16262, 16263, & 16264), this is an authorized self-study program to help prepare learners for the CompTIA/Linux+ certification exam.
Learn To:
Identify utilities used for capturing hardware configurations in Linux, features of more...Windows Server 2003 Managing a Server Env Part 2
...erver. It also teaches how to manage physical and logical devices and data storage. Learn To To match group membership types with their tasks. To identify features and functions of the Run as command. To identify tools to administer a remote server using Computer Management. To more...Windows Server 2003 Managing a Server Env Part 2
...erver. It also teaches how to manage physical and logical devices and data storage. Learn To To match group membership types with their tasks. To identify features and functions of the Run as command. To identify tools to administer a remote server using Computer Management. To more...
From Automated Learning Corporation
ESD: See It! Believe It! Control It! - On-Line Training
... engineers and technicians who work with static sensitive devices. Static electricity How static is produced How uncontrolled ESD can damage components and equipment Human Body Model (HBM) of ESD damage Controlling ESD caused by the HBM Charged Device Model (CDM) of ESD damage Controlling ESD caused by the CDM Safe & unsafe handling practice. LearnTech training incorporates interactive learning more...
From The Virtual Training Company
Microsoft Visual Basic NET
Microsoft Visual Basic has evolved throughout the years, but has steadily remained one of the most popular programming languages today. Visual Basic .NET is undoubtedly the most significant change to occur to Visual Basic yet. Significant new features include: unity of programming models, extension of the program to include mobile device capabilites, Performance Counters and Server Explorer, more...Microsoft Visual Studio NET
... for developers to create solutions spanning any Internet device. Virtual Training Company author Dave Mercer teaches developers how to harness the power of this powerful Internet application builder that allows for the targeting of operating systems and languages. Choose from a host of modernized languages and make use of the familiar syntax users of Visual Basic are familiar with, as well as more...Microsoft Windows NT 4 Workstation
...n is easy to use. It also protects operating system code, device drivers, and data from applications, making it a secure and reliable system. Author Mark Fletcher first gives a detailed overview of the main components of the workstation, including the taskbar, start menu, and windows. You will also learn how to add users and groups, how to restrict permission, how to create messaging, and more more...
From Teach Me IT
Advanced Concepts of Windows 2000 Professional
Advanced Concepts of Windows 2000 Professional WBT is the fifth and the final course in the Windows 2000 Professional curriculum that caters to the Microsoft Certified Professional exam 70-210, Installing, Configuring, and Administering Microsoft Windows 2000 Professional. The course is designed to familiarize Network administrators with the advanced concepts of Windows 2000 Professional and more...PC Basics
The PC Basics course is the first course in the A+ 2003 Certification curriculum and caters to the A+ Core Hardware (2003) Examination. This course is meant for entry-level hardware technicians and service engineers who want to acquire basic knowledge of various hardware components of a PC. This course provides users with an overview of structural and functional aspects of different hardware more...PC Configuration and Troubleshooting
...assembling a PC
Describe the process of installing other devices
Prepare the hard disk of a newly assembled computer for installing the Windows 98 operating system
Tune the settings in the Windows 98 operating system
Install external devices and device drivers on a PC
Identify the types of diagnostic software
Identify the types of preventive maintenance for a PC
Troubleshoot problems more...Planning and Installing NT Server 4.0
The Planning and Installing NT Server 4.0 WBT is meant for acquainting the user with the main features of Microsoft Windows NT Server 4.0 operating system. It also acquaints the user with the installation and uninstallation techniques related to NT Server 4.0. After completing this course, the user will be able to:
Understand NT Server 4.0
List the enhancements in NT Server 4.0 over NT 3.1 more...
From Skillspride Online Training
Aldus PageMaker 5.0 Introduction
This course is designed to provide readers with the basics of using Aldus PageMaker in order to give text a professionally typeset appearance. Participants will learn how to combine text with pictures, drawings and other graphics on the screen and then to re-arrange the format to achieve the look required before sending it to the output device or to the printer. There is ample opportunity to learn more...A+ Syllabus 10 - Module 2 - System Configuration At the end of this course you will be able to - define the function of BIOS; define the terms EEPROM and EPROM; describe the features of Flash BIOS; name two reasons why you mi | ||||||||||