Online DOE eLearning
DOE Training Provider? - Tell us about your Training!
From 123-CBT Computer Based Training
Design of Experiments and Validation of Solutions in Six Sigma

...
This course explains the basic design of experiments (DOE) concepts and outlines how to select, test, and validate improvement solutions in the final stages of a Six Sigma project. During the course, basic DOE concepts such as factors, levels, interactions, and main effects are introduced. The course also explores the full and fractional factorial designs and the DOE process. In addition,
more...
Design of Experiments and Validation of Solutions in Six Sigma
Designing and Planning Experiments in Six Sigma

...generate a well-designed solution. Design of experiments (DOE) is a controlled approach to experimentation that enables teams to systematically change the level of one or more input factors and observe the effects on the targeted response. If teams exercise care in choosing the right design including suitable factors, levels, and responses their experiments can reveal the precise combination of
more...
Conducting Experiments and Analyzing Results in Six Sigma

Conducting Experiments and Analyzing Results in Six Sigma ASQ Six Sigma Black Belt (SSBB)
Six Sigma teams design and conduct experiments to investigate the relationships between input variables and response variables. By controlling and changing the input variables and observing the effects on the response variables, a Six Sigma team gains a deep understanding of these relationships. After
more...
From Online Training Directory
Manufacturing Statistics Personal Training Library
...cs courses: SPC Workout (basic SPC course), Advanced SPC, DOE: Screening Experiments, and Measurement Systems Analysis.
The Manufacturing Statistics Library gives one learner access to our four core statistics courses: SPC Workout (basic SPC course), Advanced SPC, DOE: Screening Experiments, and Measurement Systems Analysis. SPC Workout is a basic yet comprehensive course that makes
more...
Manufacturing Statistics Personal Training Library
Six Sigma Black Belt Personal Training Library
... Investigator, Advanced SPC, Measurement System Analysis, DOE: Screening Experiments. It is recommended that you take the Green Belt Library as a prerequisite for the Black Belt Library. Many organizations use our courseware for their yellow belt, green belt, and black belt programs handling the project components internally on real life (versus contrived) situations.
The Black Belt Library
more...
From 123-CBT Computer Based Training
Six Sigma Managing Six Sigma Projects

...ages of the statistical approach to design of experiment (DOE). Identify the benefits of failure mode and effects analysis (FMEA). Identify leadership challenges in Six Sigma. Identify guidelines for selecting projects that are in line with your business priorities. Audience This course is suitable for HR
more...
Six Sigma Managing Six Sigma Projects
Six Sigma DMAIC Improving the Process
Laotzu, a Chinese philosopher, said, "The biggest problem in the world could have been solved when it was small," but as far as business processes are concerned, even catching a problem when it's small might not get at the root cause. Six Sigma Black Belts know that to find the root cause of a problem, you have to develop an improvement strategy, and then use precision tools to employ the
more...
From EMS Consulting Group, Inc.
Lean Six Sigma Green Belt Certification
Our self-paced online Lean Six Sigma Green Belt program covers all of the topics our classroom version covers. The format includes audio-visual presentation, case studies / readings, and test completion. And, like our classroom version, students will have the ability to contact the instructor with questions and requests for feedback on ideas and case exercises.. Students will also be able to
more...
From Serebra Learning Corporation
Design of Experiments DOE
...xpectations. Organizations use the Design of Experiments (DOE), a key methodology of the Six Sigma Improve phase, to quantify with statistical precision the factors that are causing this gap. Well-designed experiments result in effective process redesign, and ultimately, improved organizations. This course explains how to design and implement efficient and effective improvement experiments. Six
more...
From ProTrain Online
Green Training - Weatherization Energy Auditor (BPI)



... tailored specifically for Department of Energya s (DOE) Weatherization Program and similar utility-funded programs. This course is based on the a Core Competencies for the Weatherization Assistance Programa developed by the Weatherization Trainers Consortium. The curriculum elements are specifically designed to train technicians involved in the field of building performance and energy
more...
From Multi-media Access
Radiation Safety: Industrial Sources


"Radiation Safety for Industrial Sources" is designed to give the basic facts on radiation safety to workers in general industry. It is intended for users with sealed radiation sources enclosed within industrial devices. Workers in filling operations in which fill-checkers use radiation for detection of "filled or rejected" will find this program especially useful. Topics covered include basic
more...
From PDHengineer. com-Decatur Professional Development, LLC
Continuous Commissioning - Maximizing Building Energy Efficiency and Comfort
...rgy Managers, Maximizing Building Efficiency and Comfort, DOE - Federal Energy Management Program - October 2002. The student must take a multiple-choice quiz consisting of fifty (50) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: Benefits of Continuous Commissioning
more...
Building Security Initiatives Energy Savings and Trade-offs
...ty public gathering places and government workplaces. For DOE's Office of Energy Efficiency and Renewable Energy (DOE/EERE), this new focus on security may create both opportunities and challenges for its primary mission to advance the use of energy-efficient and renewable energy technologies. In this course the student will learn that there are times when the security improvements can
more...
Lab Design for Energy Savings
...r the 21st Century: An Introduction To Low-Energy Design, DOE/GO-102000-1112 --- August 2000. The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: Understanding the energy challenges in laboratory building design
more...
Insulation Basics
...xpected to read and review the material contained in five DOE Technical Fact Sheets covering Slab, Basement, Wall, Ceiling and Attic insulation installation guidelines and considerations. The student must take a multiple-choice quiz consisting of ten (10) questions at the end of the course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following
more...
Commercial Heat Pump Water Heaters
...Technology Alert - commercial Heat Pump Water Heaters, US DOE FEMP - December 1997. The student must take a multiple-choice quiz consisting of eighteen (18) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills regarding commercial heat pump water heaters: Technology performance
more...
Modulating Condensing Fuel-Fired Water Heaters and Hydronic Boilers
...g/Condensing Fuel-Fired Water Heater and Hydronic Boiler, DOE/EE-0171. The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to obtain PDH credits. State Board Acceptance This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is an
more...
Green Roofs
...to read and review the material contained in Green Roofs, DOE/EE-0298. The student must take a multiple-choice quiz consisting of fifteen (15) questions at the end of the course to obtain PDH credits. State Board Acceptance This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is
more...
Laboratory Building Energy Analysis
...ories For The 21st Century - Energy Analysis, Publication DOE/GO-102003-1694 - April 2003. The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills regarding laboratory building energy simulation: Energy efficiency
more...
Spectrally Selective Window Glazings
...the material contained in Spectrally Selective Glazings ? DOE/EE-0173. The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of this course to obtain PDH credits. State Board Acceptance This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is
more...
Basic Electrical Theory - Electricity and Magnetism
...ed entirely on US Department of Energy training materials DOE-HDBK-1011/1-92, Fundamentals Handbook, Electrical Science; volume 1 of 4 and covers modules 1. This course is an excellent refresher for engineers of all disciplines who want to brush up on the basic electrical theory that you learned in college. The student must take a multiple-choice quiz consisting of twenty (20) questions at
more...
Basic Direct Current DC Theory
...ed entirely on US Department of Energy training materials DOE-HDBK-1011/1-92, Fundamentals Handbook, Electrical Science; volume 1 of 4 and covers module 2, Basic DC Theory. The reader must take a multiple-choice quiz consisting of twenty-one (21) questions at the end of this course to obtain PDH credits. State Board Acceptance This course can be used by professional engineers to fulfill
more...
Energy Management for Motor Driven Systems
...tained in the Energy Management for Motor Driven Systems, DOE-Office of Industrial Technologies, Revision 2 - March 2000. The student must take a multiple-choice quiz consisting of fifty (50) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: General energy management
more...
Laboratories Best Practices Commissioning Containment Systems
...sioning Ventilated Containment Systems In The Laboratory, DOE/GO-102008-2653, August 2008.
The student must take a multiple-choice quiz consisting of twenty (10) questions at the end of this course to obtain 1 PDH credit.
Specific Knowledge or Skill Obtained
This course teaches the following specific knowledge and skills:
?Commissioning of ventilated containment systems
?Key
more...
Laboratories Best Practices Manifolding Exhaust
... Practice Guide ? Manifolding Laboratory Exhaust Systems, DOE/GO-102006-April 2007.
The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to obtain 1 PDH credit.
Specific Knowledge or Skill Obtained
This course teaches the following specific knowledge and skills:
?Opportunities to implement manifolded exhaust systems
?Energy
more...
Laboratories Best Practices Modeling Exhause Dispersion
...persion Fro Specifying Acceptable Exhaust/Intake Designs, DOE/GO-1-2005-2104, May 2005.
The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to obtain 1 PDH credit.
Specific Knowledge or Skill Obtained
This course teaches the following specific knowledge and skills:
?Exhaust analysis technique options
?Design issues related to
more...
Laboratories Best Practices Energy Recovery
Overview
Energy recovery can substantially reduce the mechanical heating and cooling requirements associated with conditioning ventilation air in most laboratories. Laboratories typically require 100 outside air at high ventilation rates, between 6 and 15 air changes per hour, primarily for safety reasons. The heating and cooling energy needed to condition this air, as well as the fan energy
more...
Instrumentation and Control Temperature Pressure Flow Level and Position Indication
...ed entirely on US Department of Energy training materials DOE-HDBK-1013/2-92, Fundamentals Handbook, Instrumentation and Control, Module 1 to 5, Volume 1 of 2.
This course is applicable to all electrical, mechanical and facility engineers, energy auditors, operation and maintenance personnel.
The reader must take a multiple-choice quiz consisting of twenty five (25) questions at the end
more...
Centrifugal Pump Fundamentals
...l Pumps" in Module 3 - "Fluid Flow" of the DOE Thermodynamics, Heat Transfer and Fluid Flow Fundamentals Handbook. The student must take a multiple-choice quiz consisting of ten questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: Centrifugal pump principle of
more...
Improving the Efficiency of Duct Systems
...contained in Improving The Efficiency of Your Duct System DOE ? Office of Building Technology, State and Community Programs Energy Efficiency And Renewable Energy ? DOE Publication DOE/EE0109 ? Revised November 1999 The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to obtain PDH credits. State Board Acceptance This course can be used
more...
Waste Heat Reduction and Recovery
...urnace Efficiency, Productivity and Emissions Performance DOE/GO-102004-1975 November 2004. The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: Heat losses from fuel-fired heating equipment What determines
more...
Industrial Heat Pumps
... Brief, Industrial Heat Pumps for Steam and Fuel Savings, DOE/GO-102003-1735 - June 2003. The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: Why heat pumps save money How heat pumps work How much energy
more...
Underfloor Air Distribution
...g Technologies: Underfloor Air Distribution (UFAD) - FEMP/DOE/EE-0295 and FEMP/NTDP Technology Installation Review. The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to obtain PDH credits. State Board Acceptance This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing
more...
Energy Efficiency Improvements in Process Heating Equipment
...se, the student will review several documents from the US DOE website.
The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of this course to obtain PDH credit.
Specific Knowledge or Skill Obtained
This course teaches the following specific knowledge and skills:
?How to estimate potential savings from an air-to-fuel ratio adjustment
?Common
more...
Heat Exchanger Fundamentals
...rial covers Module 2 - "Heat Exchangers" in the DOE Mechanical Science Fundamentals Handbook, which is an excellent source of information in the Engineering Sciences. The student must take a multiple-choice quiz consisting of ten questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge
more...
Desiccant Dehumidification Systems for Comfort Conditioning
...Products, CRADA Final Report For CRADA Number ORNL94-321, DOE Contract No. DE-AC05-96)R22464, Published July, 1999. The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: Desiccant Market Evaluation Price/Value
more...
Ozone Treatment for Cooling Towers
...aterial contained in Ozone Treatment For Cooling Towers - DOE/DOD/SERDP. The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: Cost benefits of using ozone water treatment Performance of cooling towers with
more...
Variable Speed Pumping
...iable Speed Pumping - A Guide To Successful Applications, DOE/GO-102004-1913 May 2004. The student must take a multiple-choice quiz consisting of ten (10) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: Pump types Pumping systems Retrofitting of pumping systems
more...
Ultrasonic Humidifiers
...logy for high-efficiency, low-maintenance humidification, DOE/EE-0180. The student must take a multiple-choice quiz consisting of twelve (12) questions at the end of this course to obtain PDH credits. State Board Acceptance This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is
more...
Centrifugal and Positive Displacement Pump Fundamentals
...ourse material covers Module 3 - "Pumps" in the DOE Mechanical Science Fundamentals Handbook, which is an excellent source of information in the Engineering Sciences. The student must take a multiple-choice quiz consisting of fifteen questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific
more...
Heat Transfer Fundamentals
...terial covers Module 2 - "Heat Transfer" in the DOE Thermodynamics, Heat Transfer and Fluid Flow Fundamentals Handbook. The student must take a multiple-choice quiz consisting of fifteen questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: Heat transfer definitions and
more...
Combined Heat and Power CHP Systems Guidelines
...er and Avalon Consulting, Inc. in partnership with the US DOE. The student must take a multiple-choice quiz consisting of twenty-six (26) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: A basic understanding of the types of CHP systems Key factors for CHP financial
more...
Fire Protection of Confinement Ventilation Systems
...expected to read and review the material contained in the DOE Handbook Nuclear Air Cleaning Handbook, DOE HDBK-1169-2003 Chapter 10 Fire Protection. The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: History
more...
Energy Sources for the Future
...he student will learn that the U.S. Department of Energy (DOE) leads the world in the conception, design, construction, and operation of these large-scale devices. The student will learn that these machines have enabled U.S. researchers to make some of history's important scientific discoveries, with spin-off technological advances leading to entirely new industries. The student is
more...
Ductwork - Exterior Exposed
... Delivery Effectiveness and Efficiency, LBNL, April 1998, DOE Contract No. DE-AC03-76SF00098. The student must take a multiple-choice quiz consisting of fifteen (15) questions at the end of this course to obtain PDH credits. State Board Acceptance This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur
more...
Valve Fundamentals
...urse material covers Module 4 - "Valves" in the DOE Mechanical Science Fundamentals Handbook, which is an excellent source of information in the Engineering Sciences. The student must take a multiple-choice quiz consisting of twenty-five questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific
more...
Air-Cooled Lithium Bromide Absorption for CHP Applications
...pplications, April 2005 - By Zoog, Feng, Westphalen, U.S. DOE - Energy Efficiency Renewable Energy. The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: Basic Single-Effect LiBr Absorption Cycle Performance
more...
Filters for Industry
...expected to read and review the material contained in the DOE Handbook Nuclear Air Cleaning Handbook, DOE HDBK-1169-2003 Chapter 3 - Filters In The Nuclear Industry. The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and
more...
Biomass Cofiring in Coal-Fired Boilers
...fficiency and Renewable Energy, Federal Technology Alert, DOE/EE-0288, May 2004. The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of this course to obtain 4 PDH credits. State Board Acceptance This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional
more...
Fluid Flow Fundamentals
... their knowledge base. The course is based on Volume 3 of DOE-HDBK-1012/1-92, ? Fluid Flow? . The student must take a multiple-choice quiz consisting of thirty (30) questions at the end of the course to earn PDH credits. State Board Acceptance This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur
more...
Explosives Safety
...DOE) policy requires that all DOE activities be conducted in a manner that protects the safety of the public and provides a safe and healthful workplace for employees. DOE has also prescribed that all personnel be protected in any explosives operation undertaken. The level of safety provided shall be at least equivalent to that of the best industrial practice. The risk of death or serious
more...
Characteristics and Properties of Metals
...ed entirely on US Department of Energy training materials DOE-HDBK-1017/1-93, Fundamentals Handbook, Material Science; Volume 1 of 2. It contains two modules 1 and 2: Module 1, "Structure of Metals" contains information on the basic structure of metals and discusses various imperfections and defects that affect metals. Module 2,
more...
Engineering Symbology Prints and Drawings
...rial is based entirely on Department of Energy, handbook (DOE-HDBK-1016/1-93), ENGINEERING SYMBOLOGY, PRINTS and DRAWINGS, Volume 1 of 2. This course will be useful for anyone who creates or interprets engineering drawings: product manufacturing and quality engineers, mechanical, civil and electrical engineers; inspectors; machinists; production personnel; construction workers, purchasing
more...
Steam System Surveying for Energy and Efficiency Improvements
...team System Survey Guide, ORNL/TM-2001/263 - May 2002, US-DOE Best Practices Steam Program. The student must take a multiple-choice quiz consisting of thirty (30) questions at the end of this course to obtain PDH credits. Specific Knowledge or Skill Attained This course teaches the following specific knowledge and skills: Profiling a steam system Identifying steam properties for the
more...
