Online Downstream eLearning
Downstream Training Provider? - Tell us about your Training!
From PDHengineer. com-Decatur Professional Development, LLC
Bottomless Culvert Scour Study
...reduce scour at the inlet and outlet of both upstream and downstream bottomless culverts. After reading this 4 hour course the student will have valuable information that can be used to perform a bottomless culvert scour study. The course materials are based solely on the materials ? Bottomless Culvert Scour Study ? Laboratory results? as published on the website of the Federal Highway
more...
Design and Construction of Earth Dams
...y trenches Upstream impervious blanket Relief wells Downstream seepage berm Drainage galleries Through earth abutment design State Board Acceptance This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is an approved provider of continuing education in all states that
more...
Stormwater Detention in Urban Drainage Design
...n is to store excess runoff thus reducing peak discharges downstream. Detention basins should be considered when increased runoff due to highway activities would cause additional damage to downstream property or would worsen flooding conditions. The cost of a detention basin should be compared to other methods of mitigation, such as downstream channel improvements or purchasing flood easements,
more...
Construction Site Stormwater Runoff Control
... bankfull and subbankfull flows, increased occurrences of downstream flooding, and reduced baseflow levels. EPA recognizes that such alterations can be prevented by implementing an effective storm water management program. Therefore the EPA published the Storm Water Phase II Rule on December 8, 1999, that describes a menu of Best Management Practices (BMP). "Construction Site Storm Water
more...
Fuses and Circuit Breakers
...uld be sized to not trip or open when the device directly downstream opens.
In order to earn PDH credit for this course, a multiple-choice quiz of twenty (20) questions must be passed.
Specific Knowledge or Skill Obtained
This course teaches the following specific knowledge and skills:
How fuses are made
How fuses work
How fuses are applied
The advantages and disadvantages
more...
Electrostatic Treating of Emulsions
...arth is not a marketable product and can corrode and foul downstream production equipment. While much of the produced water can be removed using conventional separation equipment, the breaking of water-in-oil emulsions often requires a more aggressive treatment, such as centrifugal force, sonic treatment or high voltage electrostatics. This course will focus on the use of high voltage
more...
