Instructor Led Engineering Training in Singapore

EPCIC Contract Management Essential Elements of International Contract Laws EPCIC Contract Management Essential Elements of I ...s during the infrastructure development stages of Design, Engineering, Procurement, Construction, Installation and Commissioning will be elaborated during the workshop. a Problem Based Learning: Unlike lectured courses, this workshop is specially developed based on the request from Clients, to use real life case histories, for grasping the International Legal Principles of the Contracts  more...

Production Technology for Non-Production Engineers 23-27 April 2012 Kuala Lumpur ...oduction professionals the basic knowledge of this engineering discipline in order to improve their communication among the asset team members. The course is composed by modules which have exercises for a full comprehension of the topics exposed. Production Technology is responsible for the functional design of the wells, and is  more...

Advanced Operations Geology with Fugro Robertson 23-27 April 2012 ...hemistry data, Formation pressure data, Drilling and well engineering information Ensuring optimal quality of this information and effective reporting plays a key role during well design (geological hazards and potential drilling problems), drilling operations as well as at the later use of the data in field studies. A key requirement for success is close co-operation between geological,  more...

Advanced Operations Geology with Fugro Robertson 16 20 April 2012 Kuala Lumpur ...hemistry data, Formation pressure data, Drilling and well engineering information Ensuring optimal quality of this information and effective reporting plays a key role during well design (geological hazards and potential drilling problems), drilling operations as well as at the later use of the data in field studies. A key requirement for success is close co-operation between geological,  more...

HPHT WELL ENGINEERING 19 23 March 2012 Kuala Lumpur Malaysia ...equip participants with knowledge and skills of HPHT well engineering and the components required for well planning and issues which influence successful drilling in such conditions. The 5 day course interactive course and workshop (with teamwork exercises) focuses on the key characteristics and challenges of HPHT wells from a well design, planning, engineering and operational perspective  more...

DEEPWATER WELL ENGINEERING 26 30 March 2012 Kuala Lumpur Malaysia Training Course Overview This 5 day training course examines the difficulties, challenges facing todaya ™s deepwater drilling programme designers and personnel where wells are being drilled in increasingly difficult downhole and environmental conditions. Ever increasing cost and legislation further contribute to design and operational pressures. From this training course, you will have  more...

Fractured Reservoir Characterisation 27-29 February 2012 Kuala Lumpur Malaysia 2nd run in Asia This course provides a practical, integrated approach to characterising and modelling natural fractures where they are important for hydrocarbon delivery. Fractured reservoirs often display highly heterogeneous dynamic behaviour that is difficult to capture using standard reservoir modelling workflows. This course addresses all the relevant aspects of characterising and modelling fractured  more...

Engineering of Subsea Production Systems 5 7 December 2011 Kuala Lumpur Malaysia This concise course is well balanced and based on more than 30 years of true project experience in Shallow and Deep Water fields around the world, from concept evaluation to first production. It is designed for Project Managers, Project Engineers, experienced or new to Subsea & highly suitable for Cost, Planning, Offshore Installation and Offshore Operation Engineers. All the Lectures  more...

Negotiation Skills Techniques for Engineers and Technical Professionals 19-20 January 2011 Kuala Lumpur Many technical experts find it difficult to move out of their expertise areas and deal with commercial matters. Negotiating to optimise business value is a step further from their comfort zones. All too often negotiations are then left to finance personnel. They bring many strengths to the table but an understanding of engineering trade-offs is not one of them. By attending this course  more...

Subsea Pipeline Engineering with Andrew Palmer Roger King Subsea pipelines are the arteries of the offshore industry, and around the world more than 18, 000km are in service. Part of almost every project, they often form a large component of project cost. This course will provide a complete and up-to-date overview of the area of Subsea Pipeline Engineering, taking delegates through the pre-design phase, design, construction, installation, operation and  more...

Fundamentals of Finance Accounting Project Investment Analysis in Oil Gas ...d to improve their own financial decision making. For engineering professionals, a high level of technical expertise is no longer sufficient for superior management performance. Oil & Gas engineering professionals who wish to succeed in the resources industry are required to develop skills beyond their core functional knowledge. An understanding of financial information and management, and  more...

3rd RUN in Asia Pacific Operations Geology with Fugro Robertson A large amount of geological data is acquired (at substantial cost) during a drilling operation. These include: Mud logs, Measurements While Drilling/ Wire-line logging, Drill cuttings, Cores and side-wall cores, Micro-palaeontology data, Geochemistry data, Formation pressure data, Drilling and well engineering information Ensuring optimal quality of this information and effective reporting  more...

Gas-Lift Design Operation and Automation with Cleon Dunham 18th July - 22nd July 2011 The objective of this course is to provide the most advanced and comprehensive gas lift design and operations training available to the industry. It also emphasizes emerging technology in the form of actual gas lift valve performance and dynamic gas lift simulation, which advance the practice of gas lift from a black art to a true engineering discipline. The course will also prove valuable to  more...

2nd run in Asia OPERATIONS GEOLOGY 18 22 April 2011 Kuala Lumpur Malaysia A large amount of geological data is acquired (at substantial cost) during a drilling operation. These include: Mud logs, Measurements While Drilling/ Wire-line logging, Drill cuttings, Cores and side-wall cores, Micro-palaeontology data, Geochemistry data, Formation pressure data, Drilling and well engineering information Ensuring optimal quality of this information and effective reporting  more...

3rd Run in Asia Subsea Pipeline Engineering 7th - 11th March 2010 Kuala Lumpur ...te and up-to-date overview of the area of Subsea Pipeline Engineering, taking delegates through the pre-design phase, design, construction, installation, operation and maintenance. It will give a complete picture of the work of design engineers and pipeline construction companies, using actual case studies from around the world to highlight the topics discussed. While the course requires no  more...

HPHT WELL ENGINEERING 28 March 1 April 2011 Kuala Lumpur Conventional HPHT (High Pressure - High Temperature) conditions (>10, 000 psi and 300 F) are becoming routine drilling targets in many basins worldwide, as exploration and production examine deeper and hotter objectives. This course will equip participants with knowledge and skills of HPHT well engineering and the components required for well planning and issues which influence successful  more...

DEEPWATER WELL ENGINEERING 21 25 March 2011 Kuala Lumpur This 5 day training course examines the difficulties, challenges facing todaya ™s deepwater drilling programme designers and personnel where wells are being drilled in increasingly difficult downhole and environmental conditions. Ever increasing cost and legislation further contribute to design and operational pressures. From this training course, you will have access to potential proven  more...

Fundamentals of Finance Accounting and Project Investment Analysis in Oil Gas 24 Jan 2011 - 26 Jan 2011 ...d to improve their own financial decision making. For engineering professionals, a high level of technical expertise is no longer sufficient for superior management performance. Oil & Gas engineering professionals who wish to succeed in the resources industry are required to develop skills beyond their core functional knowledge. An understanding of financial information and management, and  more...

WRITING EFFECTIVE STANDARD OPERATING PROCEDURES SOP FOR OIL GAS PROFESSIONALS ENGINEERS A Standard Operating Procedure (SOP) is a set of instructions having the force of a directive, covering those features of operations that lend themselves to a definite or standardized procedure without loss of effectiveness. The presence of these quality documents is essential when inspections take place since the most frequent reported deficiencies during inspections are the lack of written SOPs  more...

HPHT Well Operations 29 November 2010 - 3rd December 2010 ...equip participants with knowledge and skills of HPHT well engineering and the components required for well planning and issues which influence successful drilling in such conditions. This 5 day practically-oriented, and operationally relevant interactive training course comprises of lectures, workshop-type discussion sessions, real case histories and problem-solving activities. Key themes  more...

Enhanced Oil Recovery EOR Reservoir Engineering Aspects of CO2 Flooding -13 17 December 2010 Kuala Lumpur Malaysia Oil reservoirs mature and ultimately reach the limit of their economical productivity under primary management strategies. In order to extend the production life of such reservoirs, already proven improved and enhanced oil recovery techniques have to be considered. Carbon Dioxide (CO2) injection emerged as one of the most feasible process from both physical and economic aspects. This  more...

Engineering of Subsea Production Systems 14 16 December 2010 Kuala Lumpur Malaysia This concise course is well balanced and based on more than 30 years of true project experience in Shallow and Deep Water fields around the world, from concept evaluation to first production. It is designed for Project Managers, Project Engineers, experienced or new to Subsea & highly suitable for Cost, Planning, Offshore Installation and Offshore Operation Engineers.  more...

4th run in Asia EFFECTIVE PLANT TURNAROUND MANAGEMENT 13th December 2010 - 15th December 2010 Turnarounds are complex projects that have a substantial impact on business performance. It is imperative that Turnarounds are effectively planned and executed, especially in continuous process industries such as Oil, Gas and Chemicals. Turnarounds are more than merely technical events carried out by the maintenance function. They are an integral part of any companya ™s business strategy  more...

Subsea Pipeline Engineering 29 - 02 December 2010 ...te and up-to-date overview of the area of Subsea Pipeline Engineering, taking delegates through the pre-design phase, design, construction, installation, operation and maintenance. It will give a complete picture of the work of design engineers and pipeline construction companies, using actual case studies from around the world to highlight the topics discussed. While the course requires no  more...

Finance for Non Finance Professionals in Oil Gas and Petroleum Fiscal Regimes Applied Finance for Oil and Gas Industry 29 - 01 ...d to improve their own financial decision making. For engineering professionals, a high level of technical expertise is no longer sufficient for superior management performance. Oil & Gas engineering professionals who wish to succeed in the resources industry are required to develop skills beyond their core functional knowledge. An understanding of financial information and management, and  more...

GAS-LIFT DESIGN OPERATION AUTOMATION 18 22 OCTOBER 2010 KUALA LUMPUR MALAYSIA The objective of this course is to provide the most advanced and comprehensive gas lift design and operations training available to the industry. It also emphasizes emerging technology in the form of actual gas lift valve performance and dynamic gas lift simulation, which advance the practice of gas lift from a black art to a true engineering discipline. The course will also prove valuable to  more...

GAS-LIFT DESIGN OPERATION AUTOMATION 25 29 OCTOBER 2010 BANDUNG INDONESIA The objective of this course is to provide the most advanced and comprehensive gas lift design and operations training available to the industry. It also emphasizes emerging technology in the form of actual gas lift valve performance and dynamic gas lift simulation, which advance the practice of gas lift from a black art to a true engineering discipline. The course will also prove valuable to  more...

Introduction to Oil Gas Exploration Production For New Engineers Non-Technical Professionals 19 20 August 2010 Singapore Ex As exploration and production activities in Asia continue to grow, new engineers and supporting professionals like yourself must grasp the language and technology of exploration and production. Exploration and production technology, equipment specification and processes have a unique language that must be conquered by executives such as you. A confident understanding of the technical jargon  more...

INTERNATIONAL PETROLEUM CONTRACTS PRACTICE IN NEGOTIATIONS 29 September - 1 October 2010 Kuala Lumpur Malaysia You will learn the philosophy, evolution and fundamentals of international petroleum contracts. You will take part in life-like negotiating sessions mastering many negotiating techniques, where a mistake is a learning experience not a disaster. This course will help you develop an in-depth knowledge of the legal and contractual framework in which the upstream oil industry conducts its  more...

Introduction to Natural Gas Engineering 27 September 1 October 2010 Kuala Lumpur Malaysia ...provide training in the practical aspects of natural gas engineering and operations and the use of this background in analyzing a number of typical field problems. In the early part of the course gas reservoir engineering fundamentals, estimation of gas reserves, and calculations of gas well deliverability are covered. The remainder of the course is directed toward the design and operation  more...

WELL INTEGRITY MANAGEMENT This intensive three-day course is designed to provide participants with a thorough knowledge of well integrity management and risk assessment in producing assets. Based on the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the oil and gas industry.  more...

2nd run in Asia! COMPLETION DESIGN SCHOOL This course is aimed at engineers and supervisors who already have an understanding of well construction methods, but who would benefit from a more detailed knowledge completion design. The course will concentrate on the important aspects of completion design and what makes a safe and efficient well. A common thread of practical examples are used through-out the course.  more...