Instructor Led Equipment Training in United States

Occupational Safety Trainer Occupational Safety Trainer. This intensive 40-hour course provides a clear and concise explanation of the responsibilities concerning employee safety and the relative OSHA Standards. The purpose of this training course is to provide you with an overview of the basic knowledge and skills needed to become a successful safety trainer. Information relevant to planning, preparing, presenting, and  more...

Professional Safety Auditor An Auditor must demonstrate that they have the fundamental knowledge of professional auditing practices. Through this 40-hour in-depth practical safety auditor course, you will learn how to discover circumstances, situations, equipment, and materials that may harm employees. This course will provide you with the knowledge, skills, and ability to perform a thorough safety audits and to utilize the  more...

Harbor Maritime Security - Protecting the Nation's Ports To train personnel to ensure that all attendees can apply a standard level of adequate and timely security within the Harbor & Maritime Security environments. This course is intended to exceed the training requiremenets set forth by the International Maritime Organization's (IMO), 'Port Facility Security Officer' and the United States Maritime Transportation Security Act of 2002. Using the most  more...

Understanding Security Technologies The integrity of Industrial Security depends on a thorough understanding of Industrial Security Technologies, prior to the selection, placement, and utilization of detection equipment. Industrial Security Systems include Access Control Systems, Closed Circuit Television Systems and Intrusion Detection Systems and other industrial components. Exasmples of systems and components will be discussed  more...

Design Application of Industrial Security Systems ...to the selection, placement, and utilization of detection equipment. A Threat Assessment must first ask the questions which will later be answered in the Risk Analysis (TARA). This program provides information and techniques for the preliminary planning, design and application of industrial security systems while at the same time informing participants of the strengths and limitations of  more...

Covert Investigations Surveillance Technologies INTRODUCTION: Covert Investigations & Surveillance Technologies are excellent methods of acquiring information; however they require sound techniques and the use of experienced, trained investigators and sate-of-the-art technology. They are closely related because in each instance, the investigator banishes his or her official standing to an obscure identity in order to accomplish the mission.  more...

Technical Surveillance CounterMeasures ... the United States of America. Familiarization of various equipment types and established procedures are promoted and demonstrated throughout the training process. The applications & techniques of a professional sweep are stressed in our hands on approach. This ensures that every participant gains the information necessary to conduct a basic TSCM inspection in the field. To assist in the  more...

Risk Management for Government Industry ... to the selection, placement, and utilization of security equipment and procedures. This Risk Management for Government & Industry program is aimed at personnel in government as well as private industry who wish to improve their knowledge and understanding of Facility Protection Vulnerabilities and the implementation of Security Site Surveys. Information and techniques on preparing  more...

CCIE Security Boot Camp IPexpert prides itself on the fact that our CCIE Security boot camp offerings are the best and most recognized in the world. Our CCIE security boot camp courses are taught by highly qualified and skilled engineers that work with and understand the CCIE technologies that CCIE students must gain in order to pass the CCIE Security Lab exam. Our CCIE Security instructors have decades of experience and  more...

Hands-On Assembly Rework Solder Skills Training with Vietnamese Translation Hands-On, Assembly, Touch-Up, Rework, and Solder Skills Training. This new series of Hands-On Skills Training will focus on those seeking new employment skills, skills for job advancement and companies requiring industry certification for their employees. In consideration of the current economic situation, these seminars will be offered at a reduced rate. English as a second language will  more...

Ball Grid Array Component Rework Training This course is designed for students that require the hands-on skill and knowledge to reliably remove and install many types of the most complex BGA components. Students are taught methods for safe and reliable BGA component rework using a top of the line SRT BGA Rework System. Key Topics Include Review of the different BGA packages - ceramic, plastic, metal and micro. A review of the  more...

Advanced Workmanship Standards and Instruction for the Soldering & Rework of Through-Hole and Surface Mount Components ...hniques and introduces the student to a variety of tools, equipment and solder tips for component installation and removal. English as a second language will be a special consideration of this training series. No written tests. Students will be assessed on their actual skills performance using printed circuit boards, electronic components, specialized equipment, and tools. Training is  more...

Workmanship Standards and Instruction for the Soldering & Rework of Through-Hole and Surface Mount Components SR100 is a 2 day class for students new to hand soldering. SR100 includes one day lecture to prepare the students before going to the hands on session. Our new series of Hands-On Skills Training will focus on those seeking new employment skills, skills for job advancement and companies requiring industry certification for their employees. In consideration of the current economic situation,  more...

Maintenance Planning and Scheduling ...looking for information to do the work, or waiting on the equipment to become available as examples. Attendees will learn the responsibilities of the role, as well as those of the supporting roles for Maintenance Planning and Scheduling effectiveness, job planning, scheduling, and coordination in hands-on Maintenance Planning and Scheduling course. This course is a requirement for the Certified  more...

CCIE Service Provider Boot Camp IPexperta ™s CCIE Service Provider boot camp offerings are top-notch and most recognized in the world. Our Service Provider Boot Camp courses are taught by CCIE instructors that are skillfully trained and highly proficient in all CCIE technologies that students must know for the CCIE Service Provider exam. Every CCIE Service Provider boot camp provides in-depth printed study material.  more...

Maintenance and Reliability for Managers - 4 part series A comprehensive 4 part series highlighting the A to Z of Maintenance and Reliability to help reduce costs and drive equipment reliability across the organization.  more...

Onsite Training - Reliability-Centered Maintenance Concepts ...equipment reliability. Introduction Reliability-Centered Maintenance (RCM) Concepts is a two-day introduction into the world of Reliability-Centered Maintenance (RCM) which traces its roots back to the 1960a ™s when the Airline industry initiated one of the first analysis with the findings of Nolan and Heap. As the tools used in Reliability-Centered Maintenance are often used to drive  more...

Onsite Training - Storeroom and Spare Parts Management Foundations ...blishing common goals and objectives for driving improved equipment reliability through efficient management of spare parts, information, and materials. In contrast with finding the "hidden plant" with respect to capacity through improved equipment reliability practices, the Storeroom or Materials Management area is the "hidden investment" where millions of dollars spare parts and consumables  more...

Onsite Training - Maintaining Equipment Health with PM PdM CBM ...equipment maintenance and concepts to apply for reducing costs and increasing equipment reliability. Introduction Unfortunately, up to 70% of equipment failures are self-induced by either by the processes or practices with the organization. Every year, companies in the United States spend over $700 billion on equipment maintenance within plants and facilities, with upwards of 40% wasted on  more...

Onsite Strategic Maintenance and Reliability Improvement Training Benchmarking the organization, analyzing the gaps, and developing a strategic roadmap or Plan of Improvement to begin implementation. This two-day course immerses the attendees in the practices, processes, and components of the Maintenance and Reliability Best Practices needed to strategically drive a proactive reliability-centered culture. The course begins with assessing and benchmarking the  more...

On-Site Maintenance Management Principles Training Learn the Maintenance & Reliability Best Practices, the ROI for them, the necessary key components for success, & how to drive continuous improvement. Maintenance and Reliability Management Principles is an introduction to the Maintenance and Reliability Best Practices. The two-day course is designed to offer a high level, yet comprehensive overview of successful and cost-effective Maintenance  more...

CompTIA Security 2008 Edition R2 ...estruction Disposal of Electronics Disposal of Computer Equipment Data Security and Destruction Unit 14 Review Unit 15 - Business Continuity Topic A: Redundancy Planning RAID Levels Nested RAID Utility Services Alternate Sites Disaster or Service Failure Disaster Recovery Plan Documents Threats Disaster Recovery Team Business Impact Assessment Contingency Plan Documentation  more...

ON-SITE ARC FLASH TRAINING SEMINAR ...s) covering the servicing and maintenance of machines and equipment. Included are: Lockout / Tagout 1910. 331 - Scope 1910. 332 - Training Requirements 1910. 333 - Selection and Use of Work Practices 1910. 334 - Use of Equipment 1910. 335 - Safeguards for Personnel Protection Additional Information: In the event of an electrical accident, one of the first questions asked to you by  more...

OSHA 10-Safety Training for Construction This seminar meets the OSHA requirement for 10 hour safety training for the construction industry. Attendees will each receive a 10 hour safety training card from OSHA. For the full 30 hour OSHA safety training seminar (recommended for managers and supervisors) click this link. OSHA 10 hour training seminar objectives: This seminar is designed to provide instruction on the construction  more...

NFPA 70E Electrical Arc Flash Safety Training Prevent Injuries, Save Lives & Reduce OSHA fines Implement NFPA 70E for Electrical/ Arc Flash Safety This training covers OSHA Regulations CFR 29 1910. 331 - 1910. 335 This is a 2-day comprehensive training seminar for anyone working on or near energized equipment. Each student is tested and awarded a certificate upon successful completion. This training is specially designed  more...

Managing Building Schedules and LEED Requirements Creating Custom Building Schedules LearnVirtual is an online training program that allows you to learn right from your desk! This 3 part series will review the interactive schedule in ArchiCAD and how to customize its setup for building schedules, project indexes and LEED requirements. This will include an overview of the Interactive Schedule including editing and formatting as well as detailed steps to create a custom schedule  more...

Introduction to Vibration Monitoring ...can effectively use their facilities vibration monitoring equipment to detect problems in machinery. They will gain an understanding of what vibration Monitoring is, why it works and how it can help them do their job more professionally. Objectives: At the completion of this course, the student who actively participates will: a Understand the effect of vibration on machinery life and  more...

The Art of Mixing Course description: This class is designed to give students a thorough understanding of the art of mixing both in terms of the overall process and the specific software and hardware tools used to achieve professional results. Emphasis is placed upon the importance of careful listening and the creative use of techniques designed to help students develop their own style. Students will work through  more...

Signal Processing with Waves Course description: An in-depth study of signal processing using WAVES plug-ins that is designed to give the student a full understanding of the major categories of signal processors and their functions and features. Although this course is designed around WAVES plug ins, students will learn enough information and vocabulary to apply the same techniques using other software- and hardware-based  more...

Pro Tools 310P Course description: Pro Tools 310P focuses on the advanced operation of Pro Tools in a professional post production environment. This course offers technical insights into both Pro Tools hardware and software. Prerequisites: Prior to taking the Pro Tools Post Expert certification exam, students must have successfully completed the above 200-series courses and acquired Pro Tools Post Operator  more...

Pro Tools 310M Course description: Pro Tools 310M focuses on the advanced operation of Pro Tools in a professional music production environment. This course offers technical insights into both Pro Tools hardware and software. Prerequisites: Prior to taking the Pro Tools Music Expert certification exam, students must have successfully completed the above 200-series courses and acquired Pro Tools Music Operator  more...

Pro Tools 210M Course description: Pro Tools 210M provides techniques for working with Pro Tools systems in a professional music production environment. Concepts and skills learned in Introduction to Pro Tools, Pro Tools 110 and Pro Tools 201 are reinforced with practical music-specific examples. Prerequisites: This course continues to build on the wide variety of fundamental concepts and topics covered in the  more...

Pro Tools 210P Course description: Pro Tools 210P provides techniques for working with Pro Tools systems in a professional post production environment. Concepts and skills learned in Introduction to Pro Tools, Pro Tools 110 and Pro Tools 201 are reinforced with practical post-specific examples. Prerequisites: This course continues to build on the wide variety of fundamental concepts and topics covered in the  more...

Pro Tools 201 Course description: Pro Tools 201 covers the core concepts and skills needed to operate a Digidesign Pro Tools|HD system in a professional studio environment. Prerequisites: This course continues to build on the wide variety of fundamental concepts and topics covered in the Pro Tools 100-series courses. Access to the 201 exam requires passing all previous exams. What You Will Learn: Pro  more...

Pro Tools 110 Course description: A more detailed look at the Pro Tools system, this course covers all the key concepts and skills needed to operate Pro Tools LE 7.1 running large sessions with up to 48 tracks. This course also provides the foundation for the 200-series Pro Tools Music Production and Post Production courses. Prerequisites: Basic computer skills, some audio recording knowledge, and some Pro  more...

Pro Tools 101 Course description: Pro Tools 101 will provide an overview of the workings of one of the industry s most popular recording applications. Course participants will gain hands-on experience with Pro Tools 7.1.1 and MIDI controllers under the guidance of a certified Pro Tools instructor. Prerequisites: Enrollment is open to anyone seriously interested in the field of professional audio production  more...

Audio Recording Techniques Course description: A combination of classroom lecture and hands-on practice, Audio Recording Techniques is designed to provide a clear understanding of the essential concepts behind recording and audio production. Prerequisites: Enrollment is open to anyone seriously interested in the field of professional audio production and music recording; no previous experience is necessary. What You Will  more...

Integrating Facilities Equipment Maintenance Activties Into the Master Production Schedule ...essfully incorporate PLANNED and UNPLANNED facilities and equipment maintenance into their future looking production schedules. This valuable 1-day Manufacturing Executive Institute 4th Friday - "Supply / Demand Management School Series" Workshop has been specifically designed to provide a clear demonstration of how to incorporate maintenance activities into a Master Production Schedule.  more...

FIVE Techniques to Reduce Production Mechanical Setups by MORE THAN 20 Percent in LESS THAN 100 Days ...g throughput time. They normally look to work methods and equipment capabilities to achieve their reduction goals. But set-up times also play an important role in reducing total production cycle time. This is because set-ups, improperly executed, not only rob production of valuable productive capacity, but can also disturb the a rhythma of the factory, thereby causing further downstream  more...

Maintenance Planning and Scheduling & Materials Management and Spare Parts Maintenance Planning and Scheduling is the prerequisite for achieving cost-effective equipment reliability. In this training you will learn the ways to improve efficiency, effectiveness and reduce overall maintenance costs. Topics include: Enabling successful planning and scheduling Best-practice business process Work identification/ work request initiation Setting priorities Backlog  more...

Electrical Safety Training This class focuses on electrical safety training as outlined in both 29 CFR 1910 and 1926 regulations. It also discusses all the details and provisions found in NFPA 70E on electrical safety. Emphasis is placed on ARC FLASH protection to include all of the different Hazard Risk Categories are covered. The primary goal is to have the student understand the need for proper Safety related Work  more...

30 Hour Osha Training for General Industry This course is part of the OSHA Outreach Program but is the 30 hour program instead of the 10 hour program. It is part of the overall Safety training needed for VPP recognition and is a good practice for all workers and supervisors in an industrial and in some commercial settings. The primary focus for the training covers 29 CFR 1910 series pertaining to Working and Walking surfaces, Hazard  more...

OSHA General Industry 10 Hour Course This course is part of the OSHA Outreach Program. It is part of the overall Safety training needed for VPP recognition and is a good practice for all workers and supervisors in an industrial and in some commercial settings. The primary focus for the training covers 29 CFR 1910 series pertaining to Working and Walking surfaces, Hazard Communication, Hazardous Materials, Personal Protective  more...

Variable Frequency Drives ...common VFD problems so that you can take care of your own equipment and avoid costly repairs or service calls. This course is designed for anyone requiring a general knowledge and understanding of Variable Frequency Drives. Real world applications involving HVAC, hot water and chilled water pumps, cooling tower fans, and conveyors will be covered as well as other specific applications including  more...

Maintenance Planning Scheduling ...ce, the maintenance department is routinely asked to keep equipment running longer, with fewer failures and at lower costs. The planning and scheduling functions are critical components to make any maintenance program operate according to the new expectations. This course covers the fundamentals of planning and scheduling required for any successful maintenance program. Effective Maintenance  more...

Plumbing Codes ...affect on building inspectors, contractors, installers of equipment, and facilities management. A solid understanding of the code changes is essential regarding compliance and legal requirements. The course is based on the ICC Plumbing Code and instructed by Leonard G. "Jerry" Thompson, a licensed Plumbing and Mechanical Contractor, licensed Electrical Contractor, Building  more...

Mechanical Codes ...affect on building inspectors, contractors, installers of equipment, and facilities management. A solid understanding of the code changes is essential regarding compliance and legal requirements. The course is based on the ICC Mechanical Code and instructed by Leonard G. "Jerry" Thompson, a licensed Plumbing and Mechanical Contractor, licensed Electrical Contractor, Building  more...

Energy Codes ...affect on building inspectors, contractors, installers of equipment, and facilities management. A solid understanding of the code changes is essential regarding compliance and legal requirements. The course is based on the ICC Energy Code and instructed by Leonard G. "Jerry" Thompson, a licensed Plumbing and Mechanical Contractor, licensed Electrical Contractor, Building  more...

Building Codes ...affect on building inspectors, contractors, installers of equipment, and facilities management. A solid understanding of the code changes is essential regarding compliance and legal requirements. The course is based on the ICC Building Code and instructed by Leonard G. "Jerry" Thompson, a licensed Plumbing and Mechanical Contractor, licensed Electrical Contractor, Building  more...

Total Productive Maintenance TPM 5S TPM focuses on getting managers, maintenance personnel and equipment users all working together to prevent equipment problems and reduce expenditures. By giving ownership and responsibility of equipment and processes to the right employees, equipment breakdowns are reduced. 5S provides a systematic approach to setting standards and visual guides for preventing breakdowns and making your  more...

Basic Electricity for the Non-Electrician "The most practical course I've ever taken. This seminar was excellent " - Jim Monteith , Maintenance, Gorham House This 2-day hands-on training course is designed for anyone who needs to understand basic electricity in order to improve efficiencies and uptime at their industrial plants and large building facilities. Students will gain a firm understanding of how basic electrical  more...

Arc Flash Protection Electrical Safety ...ling injuries, and prevent damage to plants, building and equipment. It is the most up-to-date road map for meeting the latest workplace requirements. Based on NFPA 70E, which has become the new standard for meeting OSHA training obligations under CFR1910. 331-335, students attending this course will gain an immense respect for the power of electricity. They will learn about personal safety for  more...

Boiler Operation Maintenance Safety ...ot Water Boilers • Steam & Hot Water Auxiliary Equipment • Heat Transfer Principles & Thermodynamics • Combustion Fundamentals • Gas vs Oil Burners • Boiler Operator Duties & Responsibilities • Boiler Codes and Standards • Licensing Requirements • Safety Controls • Implementing Maintenance Programs • Basic Water  more...

Troubleshooting Mechanical Drive Systems Rotating Equipment ...ew perspective on troubleshooting mechanical and rotating equipment. Rather than teaching about "equipment specific" situations we'll take a more novel approach. We'll teach you to troubleshoot based on the common components that make up a piece of specified equipment so that you can go back to the workplace and troubleshoot just about anything regardless of its function, design or  more...

Understanding & Troubleshooting Hydraulics Being able to operate, maintain and troubleshoot your own hydraulic equipment and systems starts with simply understanding how and why all the various components work. That is what this course is all about. We will provide you the basic building blocks and information you need to become proficient in working with industrial hydraulics and fluid power, whether a small mobile unit or large  more...

Preventive MaintenanceEssential Care and Condition Monitoring Preventive Maintenance is essential to achieving improved equipment reliability. The implementation of a preventive maintenance program will enable your plant to identify and minimize equipment failures. Our training in Preventive Maintenance/ Essential Care and Condition Monitoring will teach the participants how to set up a cost-effective process and provide practical exericses and  more...

Substation Maintenance I Designed for field personnel who maintain industrial and utility medium-voltage substation. This course can be applied towards AVO Training Institutea ™s new Substation Certification program. Substation Maintenance I combines lectures and laboratory sessions to give the participant both usable background information and practical experience in the operation and maintenance of common  more...

Electronics for Electricians This course is designed for electricians who work on solid-state devices. Starting with a review of required math, the course proceeds with DC and AC theory, basic circuits used and the use of test equipment. This course is a prerequisite for the Electronics Troubleshooting course.  more...

Electronics Troubleshooting This course starts with an intensive review of electronics. The review starts with DC and AC theory, and continues through power supplies and digital logic. The course continues with basic test equipment and then covers troubleshooting techniques, practice with theoretical problems and troubleshooting actual circuits. The course is designed for personnel with a working knowledge of electricity and  more...

Substation Maintenance II Designed for field personnel who maintain industrial and utility medium-voltage substation. This course can be applied towards AVO Training Institutea ™s new Substation Certification program. Substation Maintenance II combines lectures and laboratory sessions to give the participant both usable background information and practical experience in the operation and maintenance of common  more...

Electrical Safety for Industrial Facilities ...for industrial electrical workers who maintain electrical equipment and systems within the low and medium voltage ranges. It also addresses voltages as low as 50-volts for control circuits, motor circuits, and other premises wiring systems that are maintained by industrial electrical workers. Attendees will learn to avoid hazards of electricity by using special precautionary techniques, such  more...

Distribution Transformer Maintenance and Testing This course is designed for personnel who maintain and test distribution transformers. Distribution Transformer Maintenance and Testing combines lecture and hands-on labs to give the participant both usable background information and practical experience in the operation, testing and maintenance of these transformers. Participants perform tests using modern test equipment to determine the  more...

Power Quality and Harmonics ...of these problems on power system components and end-user equipment will also be addressed. Commercially available tools for identifying these problems will be discussed, as well as how to interpret their results. Students will learn how to evaluate ground connections and solve many common grounding problems. Mitigation techniques for power quality problems will be studied, including the use  more...

Electrical Safety for Utilities ... for working on or near energized electrical circuits and equipment that are energized above 600 volts. Emphasis will be placed on generation, transmission, and distribution type installations. Investigation of the hazards of electricity and how to properly protect workers when performing work on deenergized or energized circuits is completed in harmony with current OSHA regulations. Procedures  more...

Basic Electrical Troubleshooting ...ts will learn general techniques to troubleshoot specific equipment and problems. Use of voltmeters, ohmmeters and other types of test equipment are explained. The specific types of equipment are motors, transformers, contactors and relays. Methods for troubleshooting various types of lighting and for the ever-increasing problem of power quality are explained. Hands-on exercises simulate real  more...

Power Factor Testing This course provides hands-on training on common substation electrical equipment. The theory of AC versus DC testing, principles of power factor testing, test methods, problems encountered, and how to compensate for them are covered. Participants will have the opportunity to test devices such as air, vacuum and oil circuit breakers, transformers and various types of bushings. Students will perform  more...

Grounding and Bonding This course is a must for technicians, engineers, and inspectors to provide a thorough understanding of fundamental grounding technologies and requirements of the National Electrical Code ®. This course is highly illustrated to provide students with photos of field installations ensuring continuity of application of the requirement. Selected topics from the Soares Book on Grounding and Bonding  more...

Fiber Optic Splicing and Testing Advanced ...on single-mode and multi-mode fiber with state of the art equipment. Connector installation labs provide the participant with the techniques to install various fiber optic connectors. Splice loss and end-to-end loss measurements are performed using power meters, light sources and optical time domain reflectometers. Participants perform splicing and testing lab exercises under the supervision of  more...

Cable Testing and Fault Location Medium-Voltage ...ions. IEEE standards are reviewed and discussed as well. Equipment covered includes Capacitive Discharge Equipment (Thumper), TDR (Time Domain Reflectometer), Hypot, Insulation Resistance Testset, Acoustic/ Magnetic Pulse Detection and Cable Route Tracing Equipment. There is also a strong emphasis on safety as well as application. Students put to practical use the information that they have  more...

Cable Splicing and Terminatinnnng Medium-Voltage ...pe, shrink and molded technologies. Our comprehensive lab equipment and supplies provides the student with the materials to demonstrate the technologies learned in class. Instruction is given in critical areas such as safety and reliability, enabling the participant to analyze causes of splice and termination failures. To successfully complete this course each participant must complete all  more...

Battery Maintenance and Testing In this lecture/ hands-on course, students will gain the knowledge necessary to effectively test and maintain system batteries in substations, power plants, and in other systems that require emergency DC power. Once batteries have been installed, a routine maintenance and testing program must be implemented for effective, optimum use of the equipment. While this course reviews the fundamental  more...

Microprocessor-Based Relay Testing DistributionIndustrial This course provides an in-depth introduction to microprocessor- based Distribution/ Industrial relays. Lecture will be mixed with intensive hands-on labs to enhance students skill levels in relay communication, setting, testing, and results interpretation. Modern test methodologies will be taught and used. Relays from various manufacturers will be presented and tested during the course.  more...

Protective Relay Maintenance, Basic This relay certification course provides in-depth instruction on basic electromagnetic induction protective relays utilizing both lecture and hands-on lab sessions. The handson training is provided to allow thorough familiarization with test equipment, test techniques and relay adjustments. This course is designed for utility and industry technicians who have the responsibility for the  more...

Indoor Air Quality Course Did you know the EPA states 90% of our lives is spent in an indoor environment? Did you also know that it is estimated that the levels of indoor air pollutants can be more than 1, 000 greater than the outside air? ESA is proud to bring to you the 16 hour IAQ Course in Grand Rapids, MI on September 18th & 19th. This course has been designed to help you identify potential concerns in your clients'  more...

How to Lay Out a Warehouse or Supply Chain Facility ...ries in more than 20 countries. His clients include Crown Equipment, The Container Store, Delta Air Lines, Landsa ™ End, Nokia, Motorola, General Motors, Nutro Products, Sony, and many others. The author of two books on industrial planning, Mr. Hales is a graduate of the University of Kansas and the Massachusetts Institute of Technology. All of the techniques presented are field-proven  more...

CCNA (Cisco Certified Network Associate ) ...network environments that use Cisco Systems or similar equipment. Contact us or keep reading to learn more. In this 5-day course, you ll cover topics such as: Configuring IP access lists, given a functioning router Configure a Catalyst switch for basic operations, given a need for plug and play operation And much more! The CCNA course is right for network  more...

EKG Technician ...hocardiography. Additionally, students will practice with equipment and perform hands on labs including introduction to the function and proper use of the EKG machine, the normal anatomy of the chest wall for proper leadplacement, 12-lead placement and other clinical practices. EKG Technicians are responsible for performing electrocardiogram tests in order to monitor and record electrical  more...

Phlebotomy Technician ...ans. The student will receive instruction in identifying equipment and supplies used to obtain a routine venous specimen, urinalysis, blood smears and capillary punctures. The student will also receive hands-on experience in veni-puncture. Upon successful completion of this course, the participant will be able to describe the 28 steps used for a proper veni-puncture and list the  more...