Instructor Led Ethernet Training
Ethernet Training Provider? - Tell us about your Training!
Please select the location nearest to you:
United Kingdom
United States
Pakistan
India
Kenya
Netherlands
Canada
Thailand
South Africa
Nigeria
Malaysia
Bangladesh
United Arab Emirates
Singapore
From Human Resource & Organisational Development Consultancy (HRODC) Postgraduate Training Institute
Telecommunication Systems


...SL2
- DSL-No Truck Roll; Self Service
- Gigabit Ethernet
- Ethernet Sales Channels
- Challenges to Wider Deployment
- Multiplexers Equipped with Reconfigurable Optical Add and Drop Multiplexers (ROADMs)
- Ethernet Enterprise Service-Internet, VPN Access, and Private Lines
- ATM-Asynchronous Transfer Mode
- ATM's Speed Is Due to Three Characteristics
more...
Telecommunication Systems
From The Career Center
CCNA Certified Network Associate Certification
...ay, Routing Information Protocol Version 2 (RIPv2),VLANs, Ethernet, access control lists (ACLs). Upon successful completion of this course, students will be able to: describe how networks function, identifying major components functions of network components, and the OSI reference model describe issues related to increasing traffic on an Ethernet LAN expand the switched network from a
more...
CCNA Certified Network Associate Certification
From Wintrac Inc.
Linux Network Security (Security)
...d discussion of the TCP/ IP suite component protocols and Ethernet operation, the student practices using various tools to capture, analyze, and generate IP traffic. Students then explore the tools and techniques used to exploit protocol weaknesses and perform more advanced network attacks. After building a thorough understanding of network based attacks, course focus shifts to the defensive
more...
Linux Network Security
...d discussion of the TCP/ IP suite component protocols and Ethernet operation, the student practices using various tools to capture, analyze, and generate IP traffic. Students then explore the tools and techniques used to exploit protocol weaknesses and perform more advanced network attacks. After building a thorough understanding of network based attacks, course focus shifts to the defensive
more...
From Alliance Training and Solutions
Free Cisco Certified Network Administrator CCNA









Cisco Certified Network Associate (CCNA)
The CCNA certification (Cisco Certified Network Associate) is an entry level certification that supports all of the career tracks within Cisco's Certification program and indicates a foundation in knowledge of networking. The Cisco CCNA Network Associate certification validates the ability to install, configure, operate, and troubleshoot medium-size
more...
From Inter-Networkz
Internetworkz CCNA Training Bangalore India
...xplain the technology and media access control method for Ethernet networks
a Explain network segmentation and basic traffic management concepts
a Explain basic switching concepts and the operation of Cisco switches
a Perform and verify initial switch configuration tasks including remote access management
a Verify network status and switch operation using basic utilities (including:
more...
From Network Bulls
Network Bulls CCNA CCNP CCSP CCIE training in Gurgaon












Cisco Certified Network Associate (CCNA ®) validates the ability to install, configure, operate, and troubleshoot medium-size route and switched networks, including implementation and verification of connections to remote sites in a WAN. CCNA curriculum includes basic mitigation of security threats, introduction to wireless networking concepts and terminology, and performance-based skills.
more...
From HBF Networks
Advanced AVVID Troubleshooting and PBX Integration


Advanced AVVID Troubleshooting and PBX Integration
AATPI Course Description
AATPI is a follow-on course to the Cisco Call Manager MCS Bootcamp (CCM) intended for engineers who must troubleshoot an IP Telephony network. In the course, students will integrate the major network components such as routers and switches with an IP Telephony solution. They will also integrate the call
more...
Cisco IP Contact Center
Course Description
This 12 day course is intended for personnel who will implement, configure and support the Cisco IPCC Product. The course covers ICM, CIPT, IPCC, and IP-IVR v3.1.2. It is based on the 6.0 ICM Release and CCM 4.0. Due to the accelerated nature of the class, not all material in the student manuals for each course will be reviewed in class. Students will have opportunities to
more...
CCVP Bootcamp Training


The CCVP Bootcamp course is a 15-day, lab-intensive course designed for delivery by HBFITES. This task-oriented course teaches the knowledge and skill needed to achieve the CCVP certification.
CCVP Bootcamp combines the following courses: Cisco Voice Over IP (CVOICE), Cisco Voice Gateways and Gatekeepers (GWGK), Cisco IP Telephony (CIPT 1), Cisco IP Telephony Part 2 (CIPT2), Implementing Cisco
more...
CVOICE - Cisco Voice Over IP Training

CVOICE Course Description
Course Content
CVOICE 5.0 is the first course in the Cisco Voice Professional Curriculum, a curriculum track that starts at the basics of packetized voice and builds up to a true voice professional level.
CVOICE lays the foundation for gaining hand-on skills and significant understanding of packet telephony by presenting the technologies that are common for both
more...
CCNP Bootcamp


CCNP Description
CCNP certification validates a network professional's ability to install, configure and troubleshoot converged local and wide area networks with 100 to 500 or more nodes. Network Professionals who achieve the CCNP have demonstrated the knowledge and skills required to manage the routers and switches that form the network core, as well as edge applications that integrate voice,
more...
ADMINISTRATING CISCO CALLMANAGER

Lesson 1: Reviewing Telephony and IP Phones
This lesson discusses Cisco IP telephony and legacy telephony components. Cisco IP telephony makes up part of the Cisco Architecture for Voice, Video, and Integrated Data (AVVID). The Cisco AVVID focus emphasizes a converged network, converging voice, video, and data. Cisco IP telephony, centered on Cisco CallManager, converges voice and data networks.
more...
CISCO CALLMANAGER MCS BOOTCAMP


CCM Course Description
System engineers must be able to integrate Cisco's AVVID solution to meet customer voice and data requirements. This is an extensive, five-day, instructor-led course with a lab consisting of four equipment pods. Each pod simulates an enterprise with two branch offices that students configure over the course of the week.
This course provides system engineers with the
more...
From African eDevelopment Resource Centre
Cisco Certified Network Associate CCNA 15-26th August 2011
CCNA validates the ability to install, configure, operate,
and troubleshoot medium-size route and switched networks, including implementation and
verification of connections to remote sites in a WAN. CCNA curriculum includes basic mitigation
of security threats, introduction to wireless networking concepts and terminology, and
performance-based skills.
Areas of concentration (New)
This new
more...
From Vstep
Ship Simulator Professional



Ship Simulator Professional v2. 0 is a new milestone for flexible, low cost/ high quality maritime training and simulation. With Ship Simulator Professional v2. 0, users get a top notch simulation at their disposal, featuring advanced ship dynamics and top of the line visuals. Ship Simulator Professional v2. 0 comes with a database of highly detailed vessels and accurately recreated environments.
more...
From IIHT-Vadapalani
CCNA Training in Chennai







...ay, Routing Information Protocol Version 2 (RIPv2),VLANs, Ethernet, access control lists (ACLs).
Course Content:
1. Inter Networking
2. Internet Protocol
3. IP Subnetting and Variable Length Subnet Masks (VLSM)
4. Introduction to the Cisco IOS
5. IP Routing
6. Enhanced IGRP and Open Shortest Path First (OSPF)
7. Layer2 Switching
8. Virtual LANs (VLANs)
9. Managing a Cisco
more...
From FormaServe Systems Ltd
TCPIP Administration on the IBM i



This one day course has been designed for technical and operational staff that need to be competent on how TCP/ IP fits into the IBM System i world.
The course will cover all aspects of this popular communications protocol.
Numerous lab exercises will ensure students are exposed to the maximum benefits of this course.
The latest features of IBM i will be demonstrated during this course.
more...
From E-Tek Computer Training
CompTIA Network 2009 Objectives
...k Implementations
Topic 5A: The OSI Model
Topic 5B: Ethernet Networks
Topic 5C: Token Ring Networks
Topic 5D: Fiber Distributed Data Interface (FDDI) Networks
Topic 5E: Wireless Technologies and Standards
Lesson 6: Networking with TCP/ IP
Topic 6A: Families of Protocols
Topic 6B: The TCP/ IP Protocol
Topic 6C: IP Address Basics
Topic 6D: Custom IP Addresses
Topic 6E:
more...
From Toronto Networking Academy
Toronto Networking Academy CompTIA A 220-701 220-702 hands-on course from 480







Start the course from building your own PC with the following computer parts and software:
Genuine Windows 7 professional edition, 64bit
Intel Core i3-550 processor (4MB Cache, 3. 20GHz)
Microsoft Office Word, Excel, PowerPoint and outlook
McAfee Security Center
HP, Acer, Dell Monitor
4GB DDR3 SDRAM
1TB - 7200RPM, SATA HD 3. 0Gb/ s, 16MB Cache
Intel Graphics
more...
Cisco CCNA Certification Prep Course from 160












After our CCNA certification course, youa ll get enough hands-on skills to setup a medium sized network properly.
And wea ll work with you until you get certified, this is our promise and we take it very seriously.
CCNA 640-802 Overview:
Cisco Certified Network Associate (CCNA ®) validates the ability to install, configure, operate, and troubleshoot medium-size route and
more...
CompTIA A, Microsoft MCITP MCSE MCTS Windows Server 2008, Cisco CCENT CCNA CCNP CCIE hands-on Lab Training Course from 160













Wea ll work with you until you get certified, this is our promise and we take it very seriously.
Leave a Message:
http://torontona. com/ contact-us/
Telephone:
(647)213-6381
Address:
185 Riviera Drive Suite 4, Markham, ON L3R 5J6
Price list:
$480 CompTIA A+ 220-701 and 220-702
$320 Cisco CCNA 640-802
$160 Cisco CCNA ICND1 CCENT 640-822
$160 Cisco
more...
From Professional Automation Support Services Ltd
Siemens S5 Advanced


S5 Programming
Programming in STL, LAD & CSF using the basic instruction set
Programming in STL using the supplementary instruction set
Use of a formal operandsa
Use of system commands
Indirect addressing using the a Doa instruction
Structured programming using organisation blocks, program blocks, function blocks and sequence blocks
Using DXO and DBI
Using Start up organisation
more...
From ETEC
CCNA (Cisco Certified Network Associate )
...ch student will design and configure VLANs, Serial links, Ethernet links, Frame relay, Access-lists, IP Interfaces, IPX Interfaces, IGRP, EIGRP, RIP, Telnet access, Virtual Terminal Lines, and many more of the CCNA exam objectives.
Each student will "learn by doing" with hands-on labs following instructor led training.
Each student has exclusive access to TWO Cisco Routers
Each
more...
From Internetwork Solutions Thailand
Cisco CCNA training bootcamp








Cisco CCNA training at ISOL
CCNA certification is as an entry certification into the internetworking career. It is an important base for a internetworking career & also a pre-requisite for Cisco professional level certifications.
Cisco Certified Network Associate validates the ability to install, configure, operate, and troubleshoot medium-size route and switched networks, including
more...
From Ultimate
Cisco - CCNA




The Cisco CCNA network associate certification validates the ability to install, configure, operate, and troubleshoot medium-size routed and switched networks, including implementation and verification of connections to remote sites in a WAN. This new curriculum includes basic mitigation of security threats, introduction to wireless networking concepts and terminology, and performance-based
more...
From Advanced Concepts
Server +
...ort Multiprocessors
NETWORK INTERFACE TECHNOLOGY
Ethernet Basic
Ethernet Cabling
Fiber Optics
100Mbps Ethernet Physical Media
Migration to Gigabit Ethernet
Gigabit Ethernet Physical Cables
IEEE 802.5 Specifications
Token Ring Advantages and Disadvantages
Performance Enhancements
NIC Load Balancing
more...
From Jidaw Systems Limited
Practical Network Fundamentals
It's an opportunity to Master Networks and Networking. Use learning opportunities that can help you take your career to the next level. Attend the instructor-led class and understand practically how networks are put together and how the elements talk to each other.
The field of Networking is undergoing tremendous growth. Businesses and people are depending more on networks. Computer Networks
more...
From I-World Technology Sdn Bhd
Cisco Certified Network Associate CCNA 640-802








This course will lead to a CISCO Certification (CCNA). This is the CISCO: Fundamental of Internetworking and WAN Configuration but with more in-depth information for those of you who are looking for a deeper knowledge base or an additional certification. The CCNA certification (Cisco Certified Network Associate) indicates a foundation in and apprentice knowledge of networking. CCNA certified
more...
From CCBOOTCAMP
CCNA Boot Camp
This Cisco course is designed specifically to prepare students for the CCNA Exam. The Cisco Certified Network Associate (CCNA) validates the ability to install, configure, operate, and troubleshoot medium-size routed and switched networks, including implementation and verification of connections to remote sites in a WAN. This curriculum includes basic mitigation of security threats, introduction
more...
From Petroleum Training Institute
Distributed Control Systems
...layer model)
Foundation Fieldbus
The HART protocol
The Ethernet
Describe the digital control loop
Describe other protocols such as Modbus and Profibus
Relate Modbus and Profibus to the Foundation Fieldbus
Distributed control system architecture
Direct digital control (DDC)
The computer/ PLC architecture
Foundation Fieldbus Architecture
Describe the differences between a CSC
more...
From ABCO Technology Inc.
CCNA-



The CCNA certification (Cisco Certified Network Associate) is the first step
towards becoming a Cisco certified expert. Students will be equipped to install, configure, and
operate LAN, WAN, and dial access services for small networks, employing the use of a wide
variety of protocols including IP, IGRP, IPX, Serial, AppleTalk, Frame Relay, IP RIP, VLAN, RIP,
Ethernet, Access. The Cisco
more...
From Parts Now! LLC
Printer Communications
...twork card configuration, printer connectivity for common Ethernet networks, parallel and USB, driver installation setup and troubleshooting, also firmware, which is quickly becoming a must know skill in the field. This class will teach the different methods of upgrading firmware, including where to get it and how to upload it into the printer. This is a hands on course where students will need
more...
From Nextec Inc
CCNA - Cisco Certified Network Associate
...ocols: IP, IGRP, Serial, Frame Relay, IP RIP, VLANs, RIP, Ethernet, Access Lists.
The CCNA course will enable qualifying students to take exam available to candidates pursuing a single-exam option for the CCNA certification. The CCNA(640-801) will provide instruction on materials from the new Interconnection Cisco Network Devices (ICND) course as well as the new Introduction to Cisco
more...
From Innovate Llc
CEE522 Introduction to Computer Networks

This course can be held at your company site for 6 or more participants. Please call us at 1. 407. 780. 5585 or send an email to innovatellc@gmail. com
CEE522 Introduction to Computer Networks
The objective of this course is to give a comprehensive introduction to computer networks and applications. Topics include: network standards and internetworking philosophies; physical layer
more...
From TELECOM TRAINING INSTITUTE, Bangladesh
IP TELEPHONY for NON ENGINEERS


...k services and equipment: routers , switches.
a LANs: Ethernet, 802 standards, categories of cables, LAN switches.
WEEK 3: UNDERSTANDING IP AND NETWORKING
a A true understanding of the OSI model and protocol stacks.
a IP addressing: classes, public vs. private, static vs. dynamic, DHCP and NATs.
a WANs, routers and bandwidth-on-demand. Virtual circuit technologies. MPLS.
more...
From Teracom Training Institute
New York City - Course 110 IP, VoIP and MPLS for Non Engineering Professionals January 17-19 2012




IP, VoIP and MPLS for the Non-Engineering Professional is the a nexta course in our Core Training series, covering IP technologies: IP networks from the ground up, fiber, Ethernet, routing, MPLS, security and VoIP.
Designed for non-engineers, this training course will give you the solid, vendor-independent foundation knowledge necessary to deal with IP telecom network projects and IP voice
more...
Santa Clara CA February 8-10 2011 Course 110-IP VoIP and MPLS for the Non-Engineering Professional







IP, VoIP and MPLS for the Non-Engineering Professional is the a nexta course in our Core Training series, covering IP technologies: IP networks from the ground up, fiber, Ethernet, routing, MPLS, security and VoIP.
Designed for non-engineers, this training course will give you the solid, vendor-independent foundation knowledge necessary to deal with IP telecom network projects and IP
more...
Vancouver BC December 7-9 Course 110-IP, VoIP and MPLS for the Non-Engineering Professional







Telecom, Datacom and Networking for Non-Engineering Professionals is the first course in our Core Training section - an intensive three-day course designed for non-engineering professionals, to get you up to speed on virtually all aspects of telecom, datacom and networking, from fundamentals and jargon to the latest technologies.
The content, its order, timing and pacing have been tuned and
more...
From S2 Infotech Pvt Ltd
TCWMP Teleman Certified Wireless Maintenance Professional








...G. The course ends with principles and operation of Metro Ethernet, DLC, MPLS & VPN and LMDS.
Course Duration : 200 Hours
Who Should Attend?
Specially designed for:
* Engineering Graduates (Electronics, Telecom, IT,
Computers)
* Engineering Diplomas (Electronics, Telecom, IT, Computers)
Course Objectives
* Explore access technologies including CDMA, TDMA,
more...
From Teracom Training Institute
Telecom, Datacom and Networking for Non-Engineers (3 days)








...vs. muxes vs. switches
Cover the essentials of LANs, Ethernet and cabling
Put in place a true understanding of the OSI model and protocol stacks
Cover IP addressing: classes, subnets, public vs. private, static vs. dynamic
Explore WANs, routers and bandwidth-on-demand: Frame Relay, ATM and IP VPNs
Understand what the Internet really is, ISPs, access and security issues
more...
New York City, October 26-28, 2010 Course 110 IP VoIP and MPLS for the Non-Engineering Professional
Course 110 IP, VoIP and MPLS for the Non-Engineering Professional is the second course in our instructor-led "core training" section. Course 110 covers virtually all aspects of IP networks, equipment and services, including IP networks from the ground up, VoIP, SIP, MPLS, competitive services, IP security and more.
Designed for non-engineers, this professional training course will give you
more...
From Triangle Advanced Design and Automation, Inc
TCPIP and Ethernet for Microcontrollers - A 2-Day Comprehensive Workshop for Embedded Systems Engineers


... us for a two-day hands-on workshop on the integration of Ethernet (100baseT) and TCP/ IP into embedded systems! Presented from the viewpoint of a consulting embedded systems engineer, this tutorial will introduce you to the theory and networking structure of 802. 2 as well as the practical integration of this network into embedded systems. You will receive your own hardware (see description
more...
From Netmax Technologies
CCNP training
...nd HSRP)
a QoS Design and Configuration
a Metro Ethernet- Controlling Access in a Campus Network
pastedGraphic_5. pdf
pastedGraphic_6. pdf
a Review and understand main protocols.
HTTP, Telnet, TCP, UDP, IP, Ethernet, Token Ring.
a Review troubleshooting methods.
a Review and use troubleshooting tools.
Network analysers, Media testers, ping, trace show commands,
more...
CCNA training
...ay, Routing Information Protocol Version 2 (RIPv2),VLANs, Ethernet, access control lists (ACLs).
The CCNA can be used as a starting point for higher level certifications, such as the CCNP (Cisco Certified Network Professional) and CCDP (Cisco Certified Design Professional). It is a prerequisite for each of these certifications.
The CCNA a two exam path (INTRO and ICND) was added as an
more...
CISCO Training
...ay, Routing Information Protocol Version 2 (RIPv2),VLANs, Ethernet, access control lists (ACLs).
CCNP Certification
Cisco Certified Network Professional (CCNP ®) validates knowledge and skills required to install, configure and troubleshoot converged local and wide area networks with 100 to 500 or more nodes. With a CCNP certification, a network professional demonstrates the knowledge
more...
From Necas Automation
ETHERNET MOBBUS PROFIBUS connection in Automation
NECAS AUTOMATION, Pioneer Organization Engaged in the field of Industrial Automation and Control. NECAS Guarantees Quality Knowledge with Practice Oriented Industrial Automation training on latest technologies on 100% Industry Oriented Modules. NECAS has Expertise in the Manufacturing of Control Panels & Integration, MCC Panels. NECAS provide Support and Solution to PLC Based control and
more...
From 7i Institute
Certified Wireless Security Engineer
... Routers
Enterprise Encryption Gateway (EEG)
Power over Ethernet (PoE)
PoE Devices
PoE Responsibilities
PoE Features
Module 11 a Network Design, Implementation and Management
Core, Distribution and Access
Capacity vs Storage
Co-Location
Corporate Data Access and the End User
Network Extension to Remote Areas
Bridging Building to Building
Wireless ISP
Small Office, Home Office
more...
From Global Knowledge Network Singapore
Implementing Cisco Data Center Network Infrastructure 2



... DCNI-2 v3. 0 includes an overview of Fibre Channel over Ethernet (FCoE). This course provides a technical overview of the Cisco Nexus platform architecture, deployment, and operations, including virtual device contexts, Layer 2 and Layer 3 features, quality of service (QoS), and security. A solution based approach is applied to multiple Nexus products in the lab. You will explore the
more...
From ReferZone
Cisco CCNA Certification

The CCNA certification (Cisco Certified Network Associate) indicates a foundation in and apprentice knowledge of networking. KnowledgeNet s CCNA program will not only teach learners how to install, configure, and operate LAN, WAN, and dial access services for small networks, but will also provide expert-led instruction, tips, and tricks in the use of several key protocols: IP, IGRP, Serial, Frame
more...
From IT Centers LLC
Cisco Ccna/ccda



The CCDA (Cisco Certified Design Associate) certification indicates
a foundation or apprentice knowledge of network design for the Cisco
Internetwork Infrastructure. CCDA certified professionals can design
routed and switched network infrastructures involving LAN, WAN, and dial
access services for businesses and organizations.
The CCNA (Cisco Certified Network Associate) certification
more...
From Corporate Education Group
Linux System Administration
... Section 9 Client Networking
Linux Network Interfaces Ethernet Hardware Tools Runtime configuration change Configuring Routing Tables ARP Advanced Configuration Starting and Stopping Interfaces Virtual IP Interfaces Enabling IPv6 Interface Bonding 802.1q VLANS Network Profiles and ifup IP Stack Configuration DNS Clients Network Services via DHCP DHCP Clients dhcpd.conf Syntax Red Hat
more...
Net+
...ntations
The OSI Model Client Network Resource Access Ethernet Networks Token Ring Networks Fiber Distributed Data Interface (FDDI) Networks Wireless Technologies and Standards Networking with TCP/IP
Families of Protocols The TCP/IP Protocol Default IP Addresses Custom IP Addresses The TCP/IP Protocol Suite TCP/IP Services
IP Address Assignment Methods Host Name Resolution
more...
From Texas State Technical College West Texas
Introduction to ControlLogix

...pecific skills such as communications with ControlNet and Ethernet, tags, module configuration, ladder logic, function blocks, arrays, and user defined data types. Students will learn project structure specific to ControlLogix by configuring tasks, programs, and routines. Subjects on distributed control include produced/consumed tags, remote I/O, and messaging. Frequent hands-on labs are
more...
From Corporate Education Group
Network Security
...ed discussion of the TCP/IP suite component protocols and ethernet operation, the student practices using various tools to capture, analyze, and generate IP traffic. Students then explore the tools and techniques used to exploit protocol weaknesses and perform more advanced network attacks. After building a thorough understanding of network based attacks, course focus shifts to the defensive
more...
Introduction to Cisco Networking Technologies INTRO
...scribe network components and functions Create a simple Ethernet network Expand an Ethernet LAN by adding a hub Connect multiple networks by creating a default gateway Calculate valid IP addresses and subnet masks Describe the functions and operations of the network and transport layers of the IP protocol stack Define the characteristics, functions, and components of a WAN
more...
Cisco Certified Network Associate CCNA Boot Camp
...scribe network components and functions Create a simple Ethernet network Expand an Ethernet LAN by adding a hub Connect multiple networks by creating a default gateway Calculate valid IP addresses and subnet masks Describe the functions and operations of the network and transport layers of the IP protocol stack Define the characteristics, functions, and components of a WAN
more...
Cisco? Certified Network Professional (CCNP?) Boot Camp
...wing areas:
General Networking Concepts
OSI Model
Ethernet Operation
IP Addressing, Configuration, Subnetting, and Variable Length Subnetting
Configuring Catalyst Switches
VLANs
IP Routing
Enabling RIP, IGRP , EIGRP , and OSPF
Access Lists
NAT and PAT
Serial Point-to-Point Connections
Establishing Frame Relay Connections
Completing ISDN Calls
The pre-class
more...
From IT Centers LLC
Microsoft MCSA/ MCSE/ Cisco CCNA (Quad Cert)




Microsoft Certified Systems Administrators (MCSAs) administer network and systems environments based on the Microsoft Windows platforms. The MCSA credential proves that you have the skills to successfully implement, manage, and troubleshoot the ongoing needs of Microsoft Windows 2000 and 2003 based operating environments, including Windows .NET Server.
*******YOU ALSO RECEIVE OUR MCSE COURSE
more...
Microsoft MCSE/ Cisco CCNA

The Microsoft Certified Systems Engineer (MCSE) credential is the premier certification for professionals who analyze the business requirements and design and implement the infrastructure for business solutions based on the Microsoft Windows 2000 platform and Microsoft .NET Enterprise Servers. Implementation responsibilities include installing, configuring, and troubleshooting network systems.
more...
