Instructor Led Exercises Training in Singapore, Singapore

AVO Attributes Inversion Principles Applications 28 May 1 June 2012 Kuala Lumpur Malaysia ...lysis. Course concepts are enhanced by numerous practical exercises and case studies. You Will Learn: a The fundamentals of seismic wave propagation and specific attributes of seismic measurements toward enhanced interpretation and petrophysics; a The benefits and cons of various attributes in various facets of investigation, including stratigraphy/ sedimentology, structural geology  more...

Well Integrity Management 23 - 26 April 2012 Kuala Lumpur ...n the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the oil and gas industry. When to take action with a well is a critical decision, both from a safety and economic perspective. A consistent approach to decision-making provides certainty within the organisation, focusing effort, and spending  more...

Production Technology for Non-Production Engineers 23-27 April 2012 Kuala Lumpur ...k and volume assessment will be presented, with practical exercises for understanding the results of a risk & volume assessment displayed in expectation curves. The difference between risk and uncertainty. A discussion of the essential requirements for a working petroleum system: trap, reservoir, seal and charge. Exercises in and guidelines for estimating uncertainties for  more...

Production Technology for Non-Production Engineers 23-27 April 2012 Kuala Lumpur ...rs. The course is composed by modules which have exercises for a full comprehension of the topics exposed. Production Technology is responsible for the functional design of the wells, and is involved with the actual construction of the wells and completion operations to create a producing well. Following the start of actual production operations,  more...

HPHT WELL ENGINEERING 19 23 March 2012 Kuala Lumpur Malaysia ...day course interactive course and workshop (with teamwork exercises) focuses on the key characteristics and challenges of HPHT wells from a well design, planning, engineering and operational perspective which includes key learnings from HPHT case histories. Key Learning Outcome from attending this World-Class training course At the end of this course, participants will have an enhanced  more...

Applied EOR Technology Project Management 26 29 March 2012 Kuala Lumpur Malaysia ... each of these areas will be discussed and through simple exercises the course participants will get an understanding for the relevance of various parameters. But more importantly, participants will also understand and appreciate the short comings of various techniques and how these could be addressed in a specific field application or via ongoing research activities. Based on the key  more...

PROJECT MANAGEMENT for Oil Gas Professionals 27 29 February 2012 Kuala Lumpur Malaysia About this training course At present, project managers in the oil and gas industry have to make decisions in an environment of high levels of uncertainty and risk. This interactive3-day course will equip you with the skills and knowledge to deliver successful projects, within budget, to deadline and of sound business value. Case histories and examples of projects will provide you with  more...

Clastic Exploration Reservoir Sedimentology This course has been developed to provide an understanding of the geometry and hydrocarbon potential of clastic depositional systems and facies, and how they are affected by such important features as basin configuration, tectonics and eustasy. Each of the major clastic environments is covered in terms of lithology, facies, log response and reservoir quality and the depositional models related to  more...

Root Cause Analysis RCA 23 - 25 November 2011 Root Cause Analysis is a systematic, evidence-driven process that helps you find the true underlying (and often hidden) causes that result in unwanted events. We will see why minor failures matter, and how they can escalate out of control. In this intermediate training course, we will explain how to select the problems that matter the most, the tools & techniques to apply and find the relevant  more...

LNG Fundamentals with Michael Williams Richard Harrison The course contrasts the technical and commercial differences between LNG and natural gas to point out benefits and constraints that arise from the LNG option. A description is given of the elements in the a gas chaina which apply to LNG and of drivers that would lead to optimisation of design and commercial operation. The range and role of relevant parties to a successful LNG project are  more...

4th Run in Asia Application of Structural Geology in Seismic Interpretation 17 21 October 2011 Kuala Lumpur Seismic interpretation requires understanding of structural development and its interrelation with the stratigraphic system. Bias and misunderstanding have unfortunately resulted in countless dry holes. So go beyond tracing horizons and understand their context within the structural system by extracting key information from seismic surveys and other datasets. You will learn a variety of  more...

PRIMARY REMEDIAL CEMENTING TECHNOLOGY 17 21 October 2011 Kuala Lumpur Your Expert Trainer Denis Gaudet P Eng The objective of this course is to provide each participant with an understanding of all aspects of well cementing so that he or she may be able to design an appropriate cementing job for a particular situation. Primary casing cementing jobs are relied upon until abandonment. Poor quality or ineffective jobs are sometimes difficult to identify and repair. The result of imperfectly conceived and  more...

Reliability Centered Maintenance Master Class with V Narayan 13 to 17 June 2011 Singapore ...exercises and not just theoretical concepts An ability to go back to the workplace and begin to apply RCM is central to learning in this training course. In the five-days, two days will be spent on working through a complex RCM study. This work will be done in teams working through syndicate sessions. The case is on a major sub-system of a large turbine, with data to be researched, as in  more...

3rd run in Asia COMPLETION DESIGN SCHOOL 27 June 1 July 2011 Kuala Lumpur ...practical examples are used througha out the course. The exercises are based around data all taken from a single field, where those attending will work through all the basic issues of a completion design. The whole exercise will be handed out after the introduction. At the end of the course the teams will present their completion designs to a 'management committee'. There is no 'right'  more...

Introduction to Petrophysics - Log Analysis LWD Wireline 30 May 3 June 2011 Kuala Lumpur Malaysia Petrophysics remains a vital component to many facets of the petroleum industry, from quantification of hydrocarbon reserves, developmental strategies to real-time decision making for reservoir navigation. This 5 day course addresses the fundamental tenets of petrophysics and formation evaluation, using integrative perspective of multiple datasets, including geological, geophysical, logging and  more...

Image Log Interpretation 23 27 May 2011 Kuala Lumpur The dipmeter is unfortunately one of the least utilized interpretation tools available to the geoscientist, despite widespread structural and stratigraphic applications. Thus, this course is designed to provide participants with a detailed understanding of dipmeter and bore hole image acquisition, interpretation techniques, and data integration into geologic and geophysical models. Applications  more...

WELL INTEGRITY MANAGEMENT 23 - 25 MAY 2011 ...n the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the oil and gas industry. When to take action with a well is a critical decision, both from a safety and economic perspective. A consistent approach to decision-making provides certainty within the organisation, focusing effort, and spending  more...

2nd Run in Asia WELL INTEGRITY MANAGEMENT 26 - 28 April 2011 Kuala Lumpur ...n the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the oil and gas industry. When to take action with a well is a critical decision, both from a safety and economic perspective. A consistent approach to decision-making provides certainty within the organisation, focusing effort, and spending  more...

HPHT WELL ENGINEERING 28 March 1 April 2011 Kuala Lumpur Conventional HPHT (High Pressure - High Temperature) conditions (>10, 000 psi and 300 F) are becoming routine drilling targets in many basins worldwide, as exploration and production examine deeper and hotter objectives. This course will equip participants with knowledge and skills of HPHT well engineering and the components required for well planning and issues which influence successful  more...

Technical Report Writing Presentation Skills For Oil and Gas Professionals 24 January 2011 - 26 January 2011 Oil & Gas professionals increasingly need to translate complex findings, analysis and recommendations for effective decision making. If you a face challenges in getting your findings into paper and presenting it effectively, you will benefit from this 3-day training course: EFFECTIVE TECHNICAL REPORT WRITING FOR OIL & GAS PROFESSIONALS a Write and turn-around accurate technical documents  more...

ROOT CAUSE ANALYSIS Intermediate Level 1 3 December 2010 Kuala Lumpur Malaysia Root Cause Analysis is a systematic, evidence-driven process that helps you find the true underlying (and often hidden) causes that result in unwanted events. We will see why minor failures matter, and how they can escalate out of control. In this intermediate training course, we will explain how to select the problems that matter the most, the tools & techniques to apply and find the relevant  more...

Clastic Exploration Reservoir Sedimentology 29th November - 03rd December 2010 This course has been developed to provide an understanding of the geometry and hydrocarbon potential of clastic depositional systems and facies, and how they are affected by such important features as basin configuration, tectonics and eustasy. Each of the major clastic environments is covered in terms of lithology, facies, log response and reservoir quality and the depositional models related to  more...

3rd Run in Asia Application of Structural Geology in Seismic Interpretation 25 - 29 October 2010 Kuala Lumpur Seismic interpretation requires understanding of structural development and its interrelation with the stratigraphic system. Bias and misunderstanding have unfortunately resulted in countless dry holes. So go beyond tracing horizons and understand their context within the structural system by extracting key information from seismic surveys and other datasets. You will learn a variety of modern  more...

Subsurface Mapping in Exploration Development Course Objectives: Course is practically based, including integrating multiple datasets, quick-look and advanced techniques for critically analyzing/ reviewing key maps (including your own and those of others), and benefits or drawbacks of modern computing. Course is designed from an applied standpoint, with numerous examples and hands-on exercises from the petroleum industry.  more...

WELL INTEGRITY MANAGEMENT This intensive three-day course is designed to provide participants with a thorough knowledge of well integrity management and risk assessment in producing assets. Based on the regulatory requirements and using real examples and exercises from around the world, this represents best practice integrity management within the oil and gas industry.  more...

RELIABILITY CENTERED MAINTENANCE MASTER CLASS Kuala Lumpur ...a good working knowledge. There will be a number of short exercises and one brief RCM exercise. Those who seek a higher level of proficiency will continue into the 3rd day master class. The 3 days will feature a detailed case study on a plant sub-system. This is a simulated exercise, giving participants hands-on experience. Participants will then learn about implementation and measurement  more...