|
Training Classes
| Learning and Development Resources
| Training Directory
| New Training Seminars
| New Training Providers
| Site Map
| Promote Training Seminars
|
Training Keywords
| Training Seminars
| Training Providers
| Regions
|
| Advertise Training Seminars
| Login
|
||||||||||||||||||||||||
Hazardous Materials Training Seminars and Classes
From Online Training Directory
DOT Hazardous Materials Transportation
    ...hazardous materials. Our 10 step approach encompasses all of the activities which must be addressed when preparing a hazardous material for shipment. This course has been updated to include recent changes to the regulations, including HM-215D.Note that we have set a 90 day access period to the course with further extensions up to 6 months if needed. It is always a best practice to take your more...Shipping Infectious Substances IATA and DOT
...hazardous materials, with an emphasis on infectious substances. Our 7 step approach encompasses all of the activities which must be addressed when preparing a hazardous material for shipment. This course has been updated to include recent changes to the regulations, including HM-215D. The course meets the requirements for training as specified in 49 CFR 172 Subpart H, including testing of more...
From Serebra Learning Corporation
Workplace Hazardous Materials Information System
The Hazardous Products Act and its regulations are administered by the Government of Canada Department of Health, commonly referred to as Health Canada. Supplier labelling and MSDS requirements are set out under the Hazardous Products Act and associated Controlled Products Regulations. This one-hour course covers information required through coordinated federal, provincial and territorial more...DOT Security for Shipment of Hazardous Materials
...rtment of Transportation (DOT), over 800,000 shipments of hazardous materials are transported in the United States every day. The materials shipped include those of chemical, petroleum, radioactive, explosive, and poisonous natures. Of the 800,000 shipments, almost 769,000 are transported by truck on the nation's roads, with the rest divided among rail, pipeline, water, and air. These hazardous more...DOT 1 Hazardous Materials Table
...ce the requirements of the Department of Transportation's Hazardous Materials Regulations, including definitions, an introduction to the nine Hazard Classes, and the HAZMAT Table. The proper identification, preparation, and transportation of hazardous materials impact everyone's safety. This training course may be used to meet the requirements for general awareness or familiarization training. more...DOT 2 Packaging and Labeling
...ce the requirements of the Department of Transportation's Hazardous Materials Regulations, including packaging, labeling, marking, and placarding. The proper identification, preparation and transportation of hazardous materials impacts everyone's safety. This training course may be used to meet the requirements for general awareness/familiarization training. Additional function-specific more...DOT 3 Shipping Papers
...ce the requirements of the Department of Transportation's Hazardous Materials Regulations, including the components of the basic description of hazardous material, general information required on the shipping paper, use of the HAZMAT Precedence Table, and general emergency response information. The proper identification, preparation, and transportation of hazardous materials affect everyone's more...DOT 4 Loading and Storage
...ce the requirements of the Department of Transportation's Hazardous Materials Regulations, including the interpretation of the segregation table, general guidelines for shipping papers, loading and unloading HAZMAT, and incident reporting requirements. The proper identification, preparation, and transportation of hazardous materials affect everyone's safety. This training course may be used to more...IATA 1 Hazard Class Identification Classification
...irements of the International Air Transport Association's Hazardous Materials Regulations, including definitions, an introduction to the Hazard Classes, and the List of Dangerous Goods. The proper identification, preparation, and transportation of hazardous materials affect everyone's safety. This training course may be used to meet the requirements for general awareness/familiarization more...IATA 2 Marking and Labeling
...proper identification, preparation, and transportation of hazardous materials affects everyone's safety. This training course may be used to meet the requirements for general awareness/familiarization training. Your employer will provide additional function-specific training. The content in this course is designed to comply with the intent of the applicable regulatory requirements. recognize more...IATA 3 Packaging
...irements of the International Air Transport Association's Hazardous Materials Regulations. This training course may be used to meet the requirements for general awareness/familiarization training. Your employer will provide additional function-specific training. The content in this course is designed to comply with the intent of the applicable regulatory requirements. recognize the general more...IATA 4 Documentation
...irements of the International Air Transport Association's Hazardous Materials Regulations, including required documentation to transport dangerous goods (Shipper's Declaration for Dangerous Goods and Air Waybill). This training course may be used to meet the requirements for general awareness/familiarization training. Your employer will provide additional function-specific training. The content more...IATA 5 Limitations and Shipment Review
...OT has a set of regulations pertaining to the shipment of hazardous materials (dangerous goods) known as the Hazardous Materials Regulations (HMR). This training course may be used to meet the requirements for general awareness/familiarization training. Your employer will provide additional function-specific training. The content in this course is designed to comply with the intent of the more...Emergency Response
This one-hour course provides information about planning for and responding to emergencies. The intent is to provide the learner with basic information on procedures that cover onsite emergencies such as an accidental release or spill of a hazardous chemical, fire emergencies, explosions, bomb threats, threats to security or personal injuries. The content in this course is designed to comply more...Emergency Response and Spill Control HAZWOPER
This training describes how to respond to various emergency situations and describes control of situations both by the workers involved and by trained emergency personnel. The content in this course is designed to comply with the intent of the applicable regulatory requirements. define "hazardous materials" recognize where spills are likely to occur identify the elements of an emergency more...Hazardous Material Management
... responsibilities of those responding to events involving hazardous materials. The content in this course is designed to comply with the intent of the applicable regulatory requirements. define hazardous materials identify the factors that influence how spills are controlled recognize where spills are likely to occur identify possible responses to a release specify potential outcomes of more...Hazard Communication
This one-hour course will acquaint you with the precautions that both you and your employer must take in order to safely use, handle, and dispose of hazardous chemicals in the workplace. The content in this course is designed to comply with the intent of the applicable regulatory requirements. identify the routes of chemical entry into the body define various categories of chemical hazards more...Hazard Communication HAZWOPER
This training discusses programs and procedures dealing with chemical hazards as stated in OSHA Regulation, 29 CFR 1910.1200, the Hazard Communication Standard. This training is geared toward employees who are actively involved in cleanup activities. The content in this course is designed to comply with the intent of the applicable regulatory requirements. identify employer responsibilities and more...Spill Prevention and Control
...hazardous materials; spill control, and confinement methods. The intent of the course is to provide the learner with information about the safe handling, movement and storage of hazardous materials. The content in this course is designed to comply with the intent of the applicable regulatory requirements. define hazardous materials recognize where spills are likely to occur specify work more...Industrial Safety - Hazard Communication
This course covers the handling of hazardous materials such as corrosives gases chemicals and flammable materials. It also deals with hazard communication the Material Data Safety Sheet and safe work practices. more...
From Automated Learning Corporation
Laser Safety _ On-Line Training
Web-training with certification test for operators, technicians, and engineers who deal with lasers. Light as energy, energy conversion Injuries Laser classifications, warning labels Nominal Hazard Zone The eye, potential exposure/injury Maximum Permissible Exposure Safety procedures, eyewear/clothing Optical density, wavelength dependencies Placement, lockout/tagout, barriers/traps, hazardous more...
From CAPSC Online Training Portal
WHMIS (Workplace Hazardous Materials Information System)
WHMIS is a hazard communication system designed to ensure workers using hazardous materials, also
known as controlled products, have all the necessary information to safely handle, store and dispose of these materials.
This course is entirely online, allowing you to train on your own time and print certificate when successfully completed. Plus, we also send you a high-quality plastic WHMIS more...
From Skillspride Online Training
A+ Syllabus 10 - Module 3 - Cleaning and Preventive Maintenance
At the end of this course you will be able to: identify the procedures and materials you should use to clean a mouse, monitor case, keyboard, touch pad, drive heads, power supplies and fans; correctly describe the equipment required to protect your PC systems from a power surge, sag or blackout; identify the correct procedures for storage of PC components; identify the procedures for working with more...A+ Module 3 - Safety and Preventative Maintenance
At the end of this course you will be able to: identify the procedures and materials you should use to clean a mouse, monitor case, keyboard, touch pad, drive heads, power supplies and fans; correctly describe the equipment required to protect your PC systems from a power surge, sag or blackout; identify the correct procedures for storage of PC components; identify the procedures for working with more...
From Technical Presentations
DOT HM126F: General Awareness and Shipping Papers
...shipping, transportation, receiving, packing or unpacking hazardous materials. It teaches your workers how to recognize and identify hazardous materials, to know where they may encounter them in their jobs, how to protect themselves, and how to respond in emergency situations. Delivery formats include CD-ROM, LAN, WAN, Intranet, Internet. The course can be customized to meet your site-specific more...DOT HM126F: Safe Work Practices
...shipping, transportation, receiving, packing or unpacking hazardous materials. It teaches your workers how to recognize and identify hazardous materials, to know where they may encounter them in their jobs, how to protect themselves, and how to respond in emergency situations. Delivery formats include CD-ROM, LAN, WAN, Intranet, Internet. The course can be customized to meet your site-specific more...Hazard Communication: You're in Control
...ht to Know" standard. Workers will learn how to identify hazardous materials and to protect themselves. The course also explains how to read and understand labels and Material Safety Data Sheets (MSDS). Safe storage practices and emergency procedures are also covred. Delivery formats include CD-ROM, LAN, WAN, Intranet, Internet. The course can be customized to meet your site-specific needs. more...HAZWOPER: Identifying Hazardous Materials
Over 70,000 chemicals are used by industry. Some 15,000 chemicals are made in industrial laboratories on a large scale today, and between 500 and 1,000 new chemicals are introduced each year. This purpose of this training is to prepare workers by providing the information necessary to help those persons involved in hazardous materials to be able to respond effectively to any emergency. Delivery more...WHMIS: Learning the System
...l workers. This course provides the training in handling hazardous materials as required by the Canadian WHMIS standard. Workers will learn about the WHMIS standard and the hazard categories. The course teaches how to recognize hazards and how over-exposure can occur. Workers will learn how to use personal protective equipment, labels, Material Safety Data Sheets, and other workplace more...
From Backup Training Corporation
Weapons of Mass Destruction
 Provides officers in a first-responder capacity with information on hazardous materials considerations, weapons of mass destruction, which includes chemical, biological, and nuclear weapons, and crime scene management. more...
From Compliance Solutions
24-Hour HAZWOPER Online
24-Hour HAZWOPER
Occasional Site Worker Online:
This is an online course that can
be completed when it is convenient for YOU to train! OSHA requires 24 hours of
safety training under OSHA 29 CFR1910.120(e) for individuals who work on a
controlled or hazardous site The
24-Hour Course is for workers either are NOT required to deal directly with
cleanup (this would generally be more...40-Hour HAZWOPER Online
...er, subsurface investigations, construction work in which hazardous materials may potentially be present
or encountered, situations where HAZMAT is prepared, packaged, labeled, marked, stored
or shipped for disposal and for any facility wherein hazardous wastes are treated, stored, or disposed.
Our Exclusive Dress-Out Pac :
An invaluable part of your initial HAZWOPER training is the more...DOT Hazmat Transportation Online
...Hazardous Materials Transportation training is designed to meet the requirements for training under 49 CFR 172.704
. The purpose of this course is to ensure awareness and promote safety among
employees who may be involved in the transport of hazardous materials.
The Department of Transportation (DOT) requires all
persons who offer hazardous materials for shipment (including shippers) more...IATA Transportation of Dangerous Goods-Online
IATA
Dangerous Goods Training-Online Course: The
IATA Dangerous Goods Training-Online Course is required for employees who are
involved in the packaging and shipment of Packed Cargo Air Consignments.
Upon
completion of this course, the student will be able to:
Identify the requirements
IATA Dangerous Goods Regulations (DGR) for air consignments.
more...Spanish 24-Hour HAZWOPER Training-Online
24-Hour HAZWOPER
Occasional Site Worker Online-Spanish:
The Spanish Version of the 24-hour
HAZWOPER course can
be completed when it is convenient for YOU to train! OSHA requires 24 hours of
safety training under OSHA 29 CFR1910.120(e) for individuals who work on a
controlled or hazardous site The
24-Hour Course is for workers either are NOT required to deal directly with
cleanup more...
| ||||||||||||||||||||||||
|
| ||||||||||||||||||||||||
| Training Directory | New Training Seminars | New Training Providers | | Site Map | Promote Training | Login | Links | ||
|
| ||
| Training-Classes.com by Skillbox® 07/18/08 Copyright 1998-2008 skillbox, inc. All rights reserved |
 |
|
| Are you a Hazardous Materials training provider? |
| You could be on this page today - for FREE! |
