Instructor Led Inspection Training - Training Resources

Scaffolding Safety The Scaffolding Safety Training course is Instructor Led training and takes place in our Denver, Colorado training facility. Scaffold Safety 29 CFR 1926. 450 Subpart L The scaffolding safety training course covers the following subject areas: - General Requirements, Scope, Application and Definitions - Capacity and Platform Construction - Competent Person for Scaffolding and  more...

Disaster Site Worker-Open Enrollment Seminar ...ity to perform the following specific tasks correctly: 1) Inspection of an air-purifying respirator, 2) Donning and doffing of an air purifying respirator and 3) Respirator seal check. Course Overview: This course alerts both old and new workers of the dangers in construction work. Basic, tried and true approaches to site health and safety as required by law are demonstrated and  more...

Mistake Proofing Course Description: The purpose of this manual is to provide an overview of Mistake Proofing methodology. The text was developed for training purposes and to provide a reference for future use. The text was written to provide for the reader techniques of mistake proofing to improve performance. Dr. Shigeo Shingo created the concepts of Mistake Proofing. Simons-White & Associates wrote the material  more...

Physical Assessment ...a health history, auscultation, palpation, percussion and inspection. It will provide you with the skills and concepts necessary to quickly and correctly perform a head to toe assessment on any patient, document your findings, and intervene appropriately on the patient s behalf. We use a systems approach to teaching, combining lecture, group discussion and the use of multimedia including video,  more...

ServSafe Food Safety Class for Spanish Speakers This 2 Day ServSafe food safety and sanitation class is just for Spanish speakers and meets the NC requirements to qualify for the 2 point food safety training bonus on food service health inspections. NC currently requires 12 class contact hours and passsing of the ServSafe exam. Pre-registration and a ServSafe Essentials 5th Edition book & exam answer sheet is required. The class runs from 8:  more...

Safety Audit Systematic evaluation of the safety and health situation is an important facet of the company operations which contributes to the company objectives. Don't wait for accidents to happen before you investigate and inspect. Safety and health consciousness tends to slip, and it's your job to be sure that that doesn't happen. A well-prepared and well-executed safety audit/ inspection can make a  more...

ServSafe Food Safety & Sanitation Training and Exam Administration This 2 Day ServSafe food safety and sanitation class meets the NC requirements to qualify for the 2 point food safety training bonus on food service health inspections. NC currently requires 12 class contact hours and passsing of the ServSafe exam. Pre-registration and a ServSafe Essentials 5th Edition book & exam answer sheet is required. The class runs from 8: 30am - 5: 00pm both days. The  more...

DRIVER SAFETY - Begins with making sure your vehicle is safe to drive: - Moving into traffic: - Moving with traffic: The Smith System - Parking the Vehicle: - Exiting the Vehicle (for professional drivers) Great for - New Drivers (especially teenagers) - Senior Drivers - Professional Drivers (large companies probably have their own training departments but small local companies usually do  more...

Safety Committee Boot Camp with OSHA 10-Hour Topics: Electrical safety, Ergonomics, Establishing an EFFECTIVE Safety Committee, Fire Protection and Prevention, Hazardous Materials, Hazardous Communications, Introduction to OSHA, Machine Guarding, Materials Handling, Means of Egress and Emergency Action Plans, Personal Protective Equipment, The Value of an Effective Safety and Health Program, and Walking and Working Surfaces. Registration fee  more...

OSHA 30 Hour General Industry NIGHT AND WEEKEND COURSE 349 dollars per student OSHA 30-Hour General Industry OPEN ENROLLMENT Early Bird Registration Price (If registered by 17 July) $349 $399 per student after 17 July Date: 27, 28, 30, July 3, 4, 6, August 6PM-20PM and 1 August 8AM-3PM Location: Lexington Municipal Complex, 111 Maiden Lane, Lexington, SC 29072 Register at www. safetyinstituteofamerica. com This is an instructor lead class with dynamic  more...

OSHA 10 Hour General Industry Aiken South Carolina 49 Dollars Per Student OSHA 10-Hour General Industry OPEN ENROLLMENT Early Bird Registration Price (If registered by 14 August) $49 $99 per student after 14 Aug Date: 24, 25 August Time: 8: 00AM a 5: 00PM Location: Bridgestone Manufacturing, 1 Bridgestone Pkwy (Industrial Park off of Bettis Academy Rd.), Graniteville, SC Register at www. safetyinstituteofamerica. com This is an instructor lead  more...

OSHA 10-Hour General Industry COLUMBIA SC 49 PER STUDENT OSHA 10-Hour General Industry OPEN ENROLLMENT Early Bird Registration Price (If registered by 26 June) $49 $99 per student after 26 June Date: 6, 7, July 09 Time: 8: 00AM a 5: 00PM Location: Pontiac Foods, 813 Bookman Rd., Elgin, SC Register at www. safetyinstituteofamerica. com This is an instructor lead class with dynamic presentations, photos and videos. Comments from  more...

OSHA 30-Hour General Industry COLUMBIA SC 349 PER STUDENT OSHA 30-Hour General Industry OPEN ENROLLMENT Early Bird Registration Price (If registered by 26 June) $349 $399 per student after 26 June Date: 6-9 July 09 Time: 8: 00AM a 5: 00PM Location: Pontiac Foods, 813 Bookman Rd., Elgin, SC Register at www. safetyinstituteofamerica. com This is an instructor lead class with dynamic presentations, photos and videos. Comments from others  more...

OSHA 30-Hour General Industry AIKEN SC 349 PER STUDENT OSHA 30-Hour General Industry OPEN ENROLLMENT Early Bird Registration Price (If registered by 26 June) $349 $399 per student after 26 June Date: 24-27 August Time: 8: 00AM a 5: 00PM Location: Bridgestone Manufacturing, 1 Bridgestone Pkwy (Industrial Park off of Bettis Academy Rd.), Graniteville, SC Register at www. safetyinstituteofamerica. com This is an instructor lead  more...

OSHA 10 Hour General Industry NIGHT AND WEEKEND COURSE 49 dollars per student OSHA 10-Hour General Industry OPEN ENROLLMENT Early Bird Registration Price (If registered by 17 July) $49 $99 student registration after 17 July Date: 10-Hour a 27, 28 July 6PM-10PM and 30 July 6PM - 8PM Location: Lexington Municipal Complex, 111 Maiden Ln., Lexington, SC 29072 Register at www. safetyinstituteofamerica. com This is an instructor lead class with dynamic  more...

IPC-610D An industry-consensus program that includes training and certification, based on the IPC-A-610, is available to your company. This certification will demonstrate your commitment to customer requirements and greatly assists any company dedicated to ISO-9000 or other quality assurance initiatives. IPC-A-610, "The Acceptability of Electronic Assemblies", is the most widely used standard  more...

Pressurized Equipment Technology for Aging Plant Part 1 Pressurized Equipment Technology for Plant Engineers Sections Formulating an Inspection and Test Plan. Factors affecting the life of boiler components. The practical application of a boiler inspection. Summary of risk based inspection philosophies. Diagnosis of boiler tube failures. Pressure vessel " diseases."  more...

Corrosion damage assessment for Risk base Inspection Part 2 This corrosion module aims to provide the participants with an understanding of why and how corrosion occurs, the metallurgical and environmental factors influencing corrosion, and practical methods of corrosion control. Participants will be able to grasp the basic concepts related to corrosion, metallurgy, and to apply the knowledge in their workplace  more...

Risk Based Inspection Its utility is based on the rough premise that 10% of the equipment in a process contributes 90% of the risk. Consequently, if this 10% of the equipment can be identified, testing and inspection can be focused on it rather than low-risk items. This approach is clearly preferable to the usual method of treating all equipment equally, regardless of its risk contribution.  more...

Corrosion damage assessment for risk based inspection Part 1 This corrosion module aims to provide the participants with an understanding of why and how corrosion occurs, the metallurgical and environmental factors influencing corrosion, and practical methods of corrosion control. Participants will be able to grasp the basic concepts related to corrosion, metallurgy, and to apply the knowledge in their workplace.  more...

Aging Plant Degradation As operating pressure plants age, premature leaks or rupture are increasingly likely. Mechanisms such as corrosion, creep, fatigue, the possibility of cracks emanating from damaged areas could lead to dramatic consequences. It is fundamental to understand degradation mechanisms, their likelihood of occurring in the facility and the impact that they may have on the facility. This intensive  more...

Plant degradation mechanism for aging plants an essential skill for Risk Base Inspection As operating pressure plants age, premature leaks or rupture are increasingly likely. Mechanisms such as corrosion, creep, fatigue, the possibility of cracks emanating from damaged areas could lead to dramatic consequences. It is fundamental to understand degradation mechanisms, their likelihood of occurring in the facility and the impact that they may have on the facility. This intensive  more...

Certified Software Tester (CST) - Instructor-Led (US, India, other countries) ...software testing and exploring the techniques of software inspection, testing, verification and validation. Concentration is placed on preparing test plans, test cases, and problem reporting, as well as maintaining processes and methods. Each program offers a professional certification. If you are exploring new career opportunities or want to stay current in your field, certification  more...

Certified Software Tester (CST) - Instructor-Led (US, India, other countries) ...software testing and exploring the techniques of software inspection, testing, verification and validation. Concentration is placed on preparing test plans, test cases, and problem reporting, as well as maintaining processes and methods. Each program offers a professional certification. If you are exploring new career opportunities or want to stay current in your field, certification  more...