Instructor Led Motors Training
Motors Training Provider? - Tell us about your Training!
From Human Resource & Organisational Development Consultancy (HRODC) Postgraduate Training Institute
Vibration Analysis 1 - Double Credits
...s
Common belt drive and gearbox faults
Electric Motors Defects
Detection Of Electrical Problem Within Induction Motors
Module 4
Instrumentation and Condition Monitoring
Rotating Equipment Types
Rotating Equipment Applications
Rolling Element Bearings
Journal Bearings
Equipment Failure Modes
Condition Monitoring Technologies
Condition
more...
Vibration Analysis 1 - Double Credits
...s
Common belt drive and gearbox faults
Electric Motors Defects
Detection Of Electrical Problem Within Induction Motors
Module 4
Instrumentation and Condition Monitoring
Rotating Equipment Types
Rotating Equipment Applications
Rolling Element Bearings
Journal Bearings
Equipment Failure Modes
Condition Monitoring Technologies
Condition
more...
From Global Innovative Campus
Uninterruptible Power Systems UPSs Industrial Batteries Variable Frequency Drives And Motors
...ers, industrial batteries, variable frequency drives, and motors are of great concern to many industries. These objectives can only be achieved by understanding the characteristics, selection criteria, sizing requirements, common problems and repair techniques, preventive and predictive maintenance. This seminar is a MUST for anyone who is involved in the selection, applications, sizing, or
more...
Electrical Motors Practical Considerations
...Motors are the workhorse of industrial, building and commercial electrical power systems. This course combines theoretical and practical considerations and aspects of operational principles of motors, their types, selection, testing, maintenance and troubleshooting. The course emphasizes motora s operational performance characteristics and electrical properties. The discussion is based on
more...
Commissioning Testing and Maintenance of Electrical Systems
...ctical aspects of testing major equipment such as cables, motors, transformers and switchgear. The course will highlight testing procedures, standard testing frequencies, what to expect in the results of testing and remedial actions. The importance of maintenance to maintain design life expectancy can not be overemphasized and the course will offer details of philosophies underlying maintenance
more...
Electrical Equipment Transformers Inverters Rectifiers Motors Variable Frequency Drives UPS Generators Circuit Breakers Fuses
...vity of electrical equipment such as the various types of motors, variable-speed drives, transformers, generators, rectifiers, inverters, uninterruptible power systems, circuit breakers, and fuses are of great concern to many industries. These objectives can only be achieved by understanding the characteristics, selection criteria, common problems and repair techniques, preventive and
more...
Operation and Applications of Practical AC Motors and Adjustable Speed Drives 18 CEUs
Date: 01 Nov - 03 Nov 2010
Location: Calgary, AB
Details: Quality Inn University
2359 Banff Trail N. W.
Calgary, Alberta, Canada
T2M 4L2
more...
From Last Minute Training
Canadian Electrical Code
...g systems, grounding and bonding, protection and control, motors, lines and substations, explosion-proof areas, fire alarms and emergency systems. It also highlights key standards, including the Building Code, IEEE, NFPA and CSA which are referenced in the Canadian Electrical Code.
After Participating In The Seminar, You Will Be Able To:
* Recognize the electrical code requirements
more...
Ontario Electrical Safety Code - epic
This seminar demonstrates accurate interpretations and applications in areas such as wiring systems, grounding and bonding, protection and control, motors, lines and substations, explosion-proof areas, fire alarms and emergency systems.
more...
From Termark Technical Institute
Understanding and Troubleshooting Programmable Logic Controllers

This 32 hour course is presented in 8 parts over 4 days. Some of the topics we cover include Relay Circuitry , Principles of input, output and logic sections of a PLC. We cover data bits and building a logic ladder. Common Addressing Techniques, Analog, Digital and Discrete modules, Power Supplies for PLC's and detecting common problems. Next we learn how to enter, edit, add or delete program
more...
From Accord info Matrix Pvt. Ltd
MCSE Training in Chennai
...e dealers of Mahindra & Mahindra, Honda, Skoda, Hindustan Motors and many more...
For the successful implementation of these solutions we adopt very dependable technologies. Also, we have been with over 6+ years of experience in nurturing young professionals with these technologies.
For Final semester students, we offer Internships in Real-Life Business Applications of our clients. Students
more...
Testing Quality Assurance
...e dealers of Mahindra & Mahindra, Honda, Skoda, Hindustan Motors and many more. For the successful implementation of these solutions we adopt very dependable technologies. Also, we have been with over 6+ years of experience in nurturing young professionals with these technologies.
Accord Info Matrix Offers Practical Training in advance technologies.
Data Warehousing & Business
more...
SQL Server 2008 Administration
...utomobile-Based Firms like All-India Dealers of Hindustan Motors, Mahindra&Mahindra, Honda, Skoda and other Multi Brand Auto-Makers.
Complete practical training will be provided in SQL DBA.
Real Time faculties with vast DBA experience will provide the training.
Migration tips from SQL Server 2005 to 2008 will be provided.
Course Material support will be provided.
Fast Track Course
more...
SQL DBA
...utomobile-Based Firms like All-India Dealers of Hindustan Motors, Mahindra&Mahindra, Honda, Skoda and other Multi Brand Auto-Makers.
Complete practical training will be provided in SQL DBA.
Real Time faculties with vast DBA experience will provide the training.
Migration tips from SQL Server 2005 to 2008 will be provided.
Course Material support will be provided.
Fast Track Course
more...
From Electrical Training USA
ELECTRICAL CROSS-TRAINING FOR MECHANICS
...onnecting, and powering up 3-phase and 1-phase electrical motors and safe procedures for testing and replacing fuses, and resetting motor overload relays. Basic motor starters and 3-phase motor connections are covered. Electrical safety, arc flash and shock hazards, and proper PPE selection are emphasized and are covered in detail. This is also an excellent review for plant electricians.
more...
From Elmech Industries
Advance Diploma in Power & Automation (ADPA)


Advance Diploma in Power & Automation (ADPA)
Duration: 2 Year ( 4 Hrs per week)-3rd Year Students
1 Year (8 Hrs Per week)- 4th Year Students
Automation: PLC, SCADA, Instrumentation & Process control, Industrial Drives, System Engineering, Industrial Networking, Human Machine Interface, Pneumatic Controllers
Power: Motor Control Center design, Smart Energy Management System
more...
From American Trainco
Electrical Troubleshooting and Preventive Maintenance
Maintenance technicians will learn the most commonly performed electrical troubleshooting tasks in this seminar as they perform hands-on exercises using real world industrial components found in your facility. They'll learn basic troubleshooting logic and how to apply various metering tools and voltage testers in their work. They'll wire basic electrical circuits and then troubleshoot a variety of
more...
Variable Frequency Drives
Learn how to troubleshoot common VFD problems so that you can take care of your own equipment and avoid costly repairs or service calls. This course is designed for anyone requiring a general knowledge and understanding of Variable Frequency Drives. Real world applications involving HVAC, hot water and chilled water pumps, cooling tower fans, and conveyors will be covered as well as other specific
more...
Electric Motors Drives and Control Circuits
...Motors that fail and the need to replace them are as common as the day is long. But did you know that it doesn't have to be that way? While motor failure may appear to be a
common problem, it is more likely that the real enemy is a wrong application or control circuit issue. Failure of the motor can be just a symptom of perhaps an even more serious problem that lies ahead.
This course is
more...
From AVO Training Institute
National Electrical Code

This lecture course is designed to provide a comprehensive study of the National Electrical Code ®. Major changes are also covered. The participant will learn how to apply the code to analyze and solve electrical system problems. Ampacity determination for sizing conductors, selecting overcurrent protection and grounding is used in this practical course. The definitions of electrical terms,
more...
Basic Electrical Troubleshooting

Students will learn general techniques to troubleshoot specific equipment and problems. Use of voltmeters, ohmmeters and other types of test equipment are explained. The specific types of equipment are motors, transformers, contactors and relays. Methods for troubleshooting various types of lighting and for the ever-increasing problem of power quality are explained. Hands-on exercises simulate
more...
Motor Maintenance and Testing

...related to the operation of AC and DC rotating machines, (motors, generators, and alternators). The course will expand basic technical skills related to fundamental concepts while at the same time introducing more advanced topics. Various types of AC and DC motors are discussed during the class giving participants practical solutions to every day field-related problems. A comparison between
more...
From Engineering And Training Solutions
Mitsubishi PLC Programming and Maintenance


This 4 day course assumes no previous knowledge of Programmable Logic Controllers. It is suitable for electrical maintenance people and electrical contractors who need to upgrade their skills into the area of PLCs and automation.
The course is also suitable for mechanical engineers and plant engineers who are finding that an increasing amount of their equipment and apparatus is fitted with PLCs.
more...
Allen Bradley SLC500 and Logix5000 PLC Programming and Maintenance


This 4 day course assumes no previous knowledge of Programmable Logic Controllers. It is suitable for electrical maintenance people and electrical contractors who need to upgrade their skills into the area of PLCs and automation.
The course is also suitable for mechanical engineers and plant engineers who are finding that an increasing amount of their equipment and apparatus is fitted with PLCs.
more...
Electrical Skills Training Part 2


...ate, Test, and Refit electrical components such as 3phase motors, solenoids, heater banks, contactors, switches, fans, circuit breakers, fuses, Simple PLC systems, Inverters......... and so on.
There is great focus on fault finding to component level.
The course has EMTA accreditation.
This course has been adopted by a number of UK companies as their starting point to multiskill the
more...
Electrical Skills Training Part 1


... Test, and Refit electrical components such as 3phase motors, solenoids, heater banks, contactors, switches, fans, circuit breakers, fuses.........and so on.
The course has 10 Units of theory and practice with a focus on the correct use of instrumentation, testing procedures, fault finding and reading electrical drawings.
It has been adopted by a number of UK companies as their starting
more...
From University of Kansas Continuing Education
How to Lay Out a Warehouse or Supply Chain Facility

Experts say now is the time to review your process flow, and look for cost reductions in every area, including energy costs, touch time reductions, and redundant processes. Whether you are laying out a new facility from scratch or restructuring an existing one, this seminar will help. This three-day seminar was developed by the professional engineers and consultants of Richard Muther & Associates,
more...
From Zilogic Systems
Zilogic ARM Embedded systems Training
...
* Writing Interrupt Handlers
* Timers and Counters
Motors and Relays
* Relays
* DC Motors
* H-Bridge
* Pulse Width Modulation
* DC Motor Speed Control
* Stepper Motors
I2C and SPI
* On-board Interconnects
* I2C protocol
* SPI protocol
* I2C vs SPI Comparison
* Accessing I2C EEPROMs
* Accessing SPI Slave Devices
Analog I/ Os
* Analog Inputs
*
more...
From Ace Learning Centre
CONSTRUCTION ELECTRICIAN
...ems , Lighting , Fire Alarms , Motor Control Components , Motors, Generators , Programmable Logic Controllers (PLC's) , Distributed Control Systems , DC and AC Power Systems .These concepts are used by Journeymen in Industrial, Commercial and Residential environment . These Sessions help Journeymen/ women Electricians excell in this challenging and rewarding trade where technology is constantly
more...
ELECTRICAL TUTOR
...ems , Lighting , Fire Alarms , Motor Control Components , Motors, Generators , Programmable Logic Controllers (PLC's) , Distributed Control Systems , DC and AC Power Systems .These concepts are used by Journeymen in Industrial, Commercial and Residential environment . These Sessions help Journeymen/ women Electricians excell in this challenging and rewarding trade where technology is constantly
more...
IP RED SEAL EXAM PREP REFRESHER COURSE July 05 , 2010
...ems , Lighting , Fire Alarms , Motor Control Components , Motors, Generators , Programmable Logic Controllers (PLC's) , Distributed Control Systems , DC and AC Power Systems .These concepts are used by Journeymen in Industrial, Commercial and Residential environment . These Tutoring Sessions help Journeymen/ women Electricians excell in this challenging and rewarding trade where technology is
more...
From Petroleum Training Institute
An Introduction to Vibration Monitoring
...city in gear trains
Sidebands
Eccentricity in induction motors
Mechanical looseness and defective belt drives
Mechanical looseness
Examples of mechanical looseness
Vibration associated with belt drives
The belt drive frequency formula
Belt defects
Vibration from electrical and mechanical sources; resonance
Vibration from electrical sources
Sources related to the power supply
more...
From Innovate Llc
CEE230 Introduction to Electric Machines

...then introduced. Extensive study to three-phase induction motors, three-phase synchronous machines, single-phase induction motors, and stepper motors are given. Next, control strategies for the different machine types will be discussed. Power electronic circuits required to drive the machines will be considered. Throughout the course, performance considerations, trade-offs, and different design
more...
CEE150 Fundamentals of Electrical Engineering

This course can be held at your company site for 6 or more participants. Please call us at 1. 407. 780. 5585 or send an email to innovatellc@gmail. com
CEE150 Fundamentals of Electrical Engineering
The objective of this course is to provide a firm foundation in the study of electrical engineering to all participants regardless of their major or specialty. It provides a concise and thorough
more...
From Xpert International
ISO Consultants Philippines

...Group, DaimlerChrysler, Fiat, Ford Motor Company, General Motors Corporation, PSA Peugeot-Citroen, Renault and Volkswagen - plus national trade associations - AIAG (America), VDA (Germany), SMMT (UK), ANFIA (Italy) and FIEV (France). Japanese vehicle manufacturers association, JAMA, were also involved in the development of ISO/ TS 16949: 2002, opening the way for Japanese vehicle manufacturers
more...
From SansRisk Business Solutions
CAPSTONE Business Simulation - Faculty Dev Program - 14-15 Sept 11 - Bangalore
... corporate users are Microsoft, General Electric, General Motors, Goldman Sachs, Samsung, BP, Alcoa and among the business schools, Harvard, Wharton, Northwestern and Vanderbilt etc.
In India CAPSIM ® simulations are used by TCS, Infosys, Wipro, L&T, Pepsi, Asian Paints, Mahindra & Mahindra, Nestle, Genpact, JCB, Allergan, Microsoft, JSW, Intuit, Kotak Mahindra Bank, Dell,
more...
From CMC Limited - A Tata Enterprise
Best NET Training Institute with MCSD Certification in NOIDANCR
... organizations like Tech Mahindra, HCL Technologies, Tata motors in C, C++, LINUX, UNIX, JAVA/ J2EE, .NET, ORACLE Technologies. We have already Trained 400 employees of Tech Mahindra & more than 800 employees of HCL as ILP at our Noida Center since July 2006. To add on we are also providing Pro-metric Testing facilities for the candidates which add on the enduringness to our program. We are
more...
From ThinkLink Supply Chain Services
Manufacturing Supply Chains



...ing ZLC, he was Director, Global Supply Chain, at General Motors.
He was responsible for Supply Chain Strategy, Planning, and Security in GM's Supply Chains Worldwide. In that role, he led the development of Supply Chain Strategies for emerging markets and was responsible for coordinating the rapid growth of GM's Global Supply Chains. He was also responsible for implementing Security
more...
Fundamentals of International Logistics
... Services, DuPont, ABB, Capgemini, SAP Labs, Godrej, Tata Motors, Indian Navy, CII etc. in India, USA, UK and South East Asia
He has Senior Managerial experience in Supply Chain functions like Procurement, International Logistics, Manufacturing, Warehousing, Customer Order Processing, Inventory Control in Computer and Light Engineering Industries
Bhaskaran is a renowned Speaker within the
more...
Essentials of Supply Chain Management



... Services, DuPont, ABB, Capgemini, SAP Labs, Godrej, Tata Motors, Indian Navy, CII etc. in India, USA, UK and South East Asia He has Senior Managerial experience in Supply Chain functions like Procurement, International Logistics, Manufacturing, Warehousing, Customer Order Processing, Inventory Control in Computer and Light Engineering Industries
Bhaskaran is a renowned Speaker within the
more...
From APPIN Technology Lab Kondhwa
Robotics Courses in Pune
Embedded Robotics
The course involves making of a robot from scratch. During the workshop you will be exposed to programming in 8051 Microcontroller, PIC microcontroller & Embedded Linux. At the end of the Training you would have constructed your own robot. The Training clears concepts related to embedded systems, artificial intelligence, robotics and automation. The Training is a flagship
more...
From Infopace Management Pvt Ltd
Change Management -managing people during change
...rati telesoft, KPMG, Larsen & Toubro, Spice telecom, Tata Motors, Oracle, IndusInd bank, Canon are some of the partial list of customers he has handled. He has also participated in numerous Competency development centers as an assessor.
He is also a visiting professor at various B-Schools including Bishop Cotton institute of Management, Sambaram institute of management Studies, Presidency
more...
From SansRisk Business Solutions
CAPSTONE Business Simulation - Faculty Dev Program - Sept - Bangalore
... corporate users are Microsoft, General Electric, General Motors, Goldman Sachs, Samsung, BP, Alcoa and among the business schools, Harvard, Wharton, Northwestern and Vanderbilt etc.
In India CAPSIM simulations are used by TCS, Infosys, L&T, Pepsi, Asian Paints, Kotak Mahindra Bank, Dell, Alcatel-Lucent etc. It is also used in several business schools viz. IIM-A, IIM-B, SP Jain, IIFT,
more...
From Pioneer Engineering
Vibration Analysis Training Cat II

Intermediate Vibration Analysis - ISO Cat II.
Students who successfully complete this course will be able to specify basic FFT parameters, establish initial alarm set points, and perform fundamental signature and phase analysis. This class is intended for maintenance technicians and engineers who want an intermediate course in vibration analysis.
Follows Category II Guidelines Established by
more...
From Indus Global Academy of Technical Education
Certificate Training on HVAC Engineering






Indus Global Academy of Technical Education is happy to introduce the certificate course in Heating Ventilating & Air Conditioning ( HVAC). The HVAC Engineers are playing very vital role in providing comfort air conditioning starting from residential buildings to shopping Malls, high rise building, Hospitals, Restaurants etc.,
Heating and air-conditioning systems control the temperature,
more...
