Oil And Gas - Training Resources

Pump Technology The course is designed to Understand the principles of design, specification and classification of pumps.  more...

Valve Technology Valves usually appear to be simple in form and operation, such as those of manual On-Off Valve, Check Valve, or the Fixed Valve type such as an Orifice, Blind etc. You will discover that even these components are frequently installed improperly throughout the industry. You will learn how components such as Safety and Relief Valves can become highly complicated and dangerous. The consequences of  more...

Storage Tanks Inspection, Cleaning & Maintenance Bulk Storage tank cleaning is part of the refinery routine and can be immense task for the team and supervisors to tackle. Sometimes outside agencies can be utilized and this is extremely expensive. Oil companies are utilizing their resources to manage some of the tasks involved and some have full time teams. This operation requires detailed planning and organizing with full operating cleaning  more...

Environmental Handling for Oil and Gas ...e industry grasp current worldwide environmental issues. Oil and gas facilities should focus on minimizing environmental risks. One fourth of this can be accomplished through the application of comprehensive techniques of assessment and remediation. The course stresses application of standard scientific and technical environmental protocols derived from ISO and ASTM standards to property  more...

Introduction to Oil & Gas Industry ...oil and gas exploration and production the World would literally grind to a halt. The dependency on oil & gas products, the everyday materials and resources from oil and gas are evident in all aspects of our daily lives. How are oil and gas deposits located? How are they safely and efficiently extracted for onward processing without detrimental environmental impacts. This is a short but  more...

Accident and Incident Investigation in the Oil & Gas Industries There is never a single cause for an accident or an incident and the source of each accident and the subsequent analysis should build a picture of events and how to avoid accidents and incidents in the future. Accident & Incidents are time consuming but essential processes for preventing further damages or losses. This course is designed to give the participants an insight in the complexity of  more...

Advanced Safety Management in the Oil & Gas Industry Safety and Health management are becoming an evermore important aspect in the control and reduction of accidents, incidents, illness and expensive litigation claims. In Oil & Petrochemical industries the essential purpose of Safety Management regulations is to access the scopes and definitions, areas of specific responsibility of various parties, competencies expected, safety awareness and safe  more...

Advanced Refinery Technologist Specialist Most Refineries have common equipment and systems to make the processing of oil products as efficient and as environment friendly as possible. Good firm understanding of process and maintenance contribute to the operations and are the keys to ensure that the production targets are being sustained. Also operational staff must have a firm grasp of the base products are planned and their processing  more...

Industrial Waste Water Treatment System & Recycling for Re-use Water is increasingly becoming a scarce resource. Large and small scale users need to take action to conserve it not only because it is prudent practice to do so for their own benefit, but also because it is an active demonstration of their concern about the global pollution and environmental problems. Large industries in particular are required to employ environmental specialists to assist them  more...

Oil Spillage Emergency for Operations Oil Companies recognize the need to have in place an effective and tested crisis management capability. Oil spill response planning is one facet of that activity. The handing of oil materials is a necessity in our every day life. The possibility of accidents involving oil must be minimized and many measures are being taken in this direction. One of these measures however is preparedness for  more...

Bunkering Procedures The cost of Bunkering is 50 % approximately the cost of fuel and has to be correctly executed to save none necessary overpayments of Bunkers. Why because of the Heat Expansion of Fuel Oils. Bunkering needs to be done by competent staff efficiently to keep cost down. This course will explain and demonstrate how this can be achieved.  more...

Negotiating International Petroleum Agreements The course is ideally suited to those requiring an introduction into negotiation of international petroleum agreements or those who require a fundamental grounding in petroleum economics.  more...

Pump & Drives Optimise Operation Techniques Pump and Driver is an indispensable, strongly inter-related couple, on the health and well being of which depends the entire process. This program is designed to assist in identifying the various consequences of change in requirements and performance, how to utilize diagnostics to help the trouble shooting process and identifying root causes.  more...

Modern Safety Management The course will present Safety & Health, principles as well as Environmental concerns and Fire fighting. The course will describe; Accidents accident prevention, accident causes safe working systems; Occupational Health - principles, hazards. Gas Testing - Explosivity, toxicity, oxygen deficiency; Entry into confined spaces - hazards and precautions; Risk Assessment; Accident Incident  more...

Strategic Planning and Goal Setting The successful manager and supervisor need to have a firm understanding of Planning and Organizing Skills. They also need to be capable in setting achievable Goals for themselves, Individuals and their team. Strategic planning is needed to acquire successful results and takes careful consideration in the utilization of the available resources within set deadlines. Tasks are required to be  more...

Advanced Risk Assessment with Production & Operation in Oil & Gas Industry In all places of work particularly were there are associated risks involved with production, processing and manufacturing, there are also associated risks from chemicals, machinery and moving equipments. These need to be risk assessed and quantified to protect employees and the property concerned. Risks can be assessed on various levels and a plan of Risk Areas can be formulated and coordinated.  more...

Risk Management Awareness in the Marine Industry Risk management is a term often heard in modern business, but few people have a clear understanding of exactly what it involves. We are all aware that there are certain risks in life that have to be faced and managed appropriately. After all, the ability to manage your exposure to risk results in eventual commercial success or failure. This course will help you to understand the typical risks  more...

Advanced Pump Technology (Design and Selection) In selecting a process pump, especially for the petroleum and petrochemical industries one must look beyond the immediate need of merely satisfying the stated process parameter requirements. The unit, pump and driver, has to be fully integrated in the process system. Over its entire life cycle the unit has to provide a reliable and economic service, in safety, with full respect to the  more...

Emergency Response Management (Plant & Refinery) Critical situations and events in Plants and Refineries must be handled in such a way so as not to cause more harm to personnel or damage to the Industry concerned. This takes careful planning and implementation and should there be an occurrence it follows that the right personnel have the ability to deal with the situation effectively and safely. This course is designed to The Participants will  more...