Instructor Led OSHA Training
OSHA Training Provider? - Tell us about your Training!
From HAZMAT Plans & Programs, Inc
HAZWOPER 24 Hour Training, Denver, CO - Instructor Led




...grams 24-Hour HAZWOPER course is the training required by OSHA 29 CFR 1910 120 for the "Occasional Site Worker" on a hazardous waste site. If you are looking for 24 Hr certification, this is the course you will need. The HAZWOPER 24 Hour is an instructor-led three day seminar held in Denver, Colorado.
Note: OSHA considers an "Occasional Site Worker" to be any worker whose job function does
more...
HAZWOPER 24 Hour Training, Denver, CO - Instructor Led
HAZWOPER 40 Hour Training, Instructor Led Training in Denver, CO


... Hour HAZWOPER course is the initial training required by OSHA 29 CFR 1910 120 for workers on a hazardous waste site. The HAZWOPER Training includes both classroom instruction and a hands-on HAZMAT emergency response exercise. The 40 Hour HAZWOPER training course takes place over five 8 hours days in our training classroom located in Denver, Colorado.
Who Should Take the HAZWOPER 40 Hour
more...
Safety Manager Training - Denver, CO

...fety Manager course teaches students the applicability of OSHA regulations and the importance of a comprehensive safety management system. The course is a one day, Instructor-Led training session that takes place in Denver, CO.
Topics of Discussion in the Safety Manager's Course:
* Record Keeping
* Safety Programs
* Coping with a Visit by an OSHA Inspector.
* Violations, Citations
more...
Trenching and Excavation Safety, Denver, CO


...rse and details the requirements for training found under OSHA standard 29 CFR 1926. 650 Subpart P. This training is applicable to all those working in and around excavations and trenches. The Excavation and Trenching course is Instructor led training and takes place in Denver, Colorado.
The Trenching/ Excavation Safety Course covers the following topics in accordance with 29 CFR 1926. 650
more...
Fall Protection and Fall Prevention Training - Denver, CO






...and Fall Prevention course developed by HP&P Safety meets OSHA's training requirements found under 29 CFR 1926 500 Subpart M. It is an Instructor-Led "Competent Level" course held in our Denver, Colorado training facility. Next scheduled class date: January 20, 2012.
Students will learn the difference between Fall Protection and Fall Prevention and the applicable OSHA rules that apply to
more...
Confined Space Training - Denver, CO


...OSHA's requirements for Confined Space Safety found under 29 CFR 1926 21 and Permit-Required Confined Space, 29 CFR 1910 146. The Confined Space safety training is an Instructor-led "Competent Level" course that takes place in Denver, Colorado.
Student objectives:
Become knowledgeable in the following areas:
- Hazard Assessment for Confined Spaces
- General Requirements of the
more...
OSHA 10 Hour Training for General Industry, Denver, CO, Instructor-Led Training



...OSHA 10 Hour for General Industry seminar is an introductory training course that teaches workers hazard recognition and safe work practices in accordance with OSHA General Industry Standards, 29 CFR 1910. The 10 Hour Training program is geared for the entry level workers in manufacturing, oil and gas, warehousing, chemical processing, transportation, aviation, etc.
The 10 Hour for General
more...
Confined Space Training - Denver, CO


... is a "Competent Level" Course. This safety course covers OSHA's requirements for Confined Space Safety found under 29 CFR 1926 21 and Permit-Required Confined Space, 29 CFR 1910 146. The Confined Space course is Instructor-led and takes place in Denver, Colorado.
- - - - - -
Confined Space training outcomes - students will become knowledgeable in the following areas:
- Hazard
more...
H2S Gas Safety - Denver, CO, Instructor Led Training


...orado.
- - - - - - -
Course Outline:
- Intro to OSHA. OSHA & API regulations specific to H2S
- Chemical and Physical Properties of H2S
- Occupational Exposure Limits
- Health Hazards of H2S gas
- Respiratory Protective Equipment
- Detection of H2S
- Initial Response Strategy
Learning Objectives of the H2S Gas Training course:
- Be knowledgeable about the OSHA and API
more...
OSHA 30 Hour Training for General Industry - Denver, CO



...OSHA 30 Hour course teaches students the recommended best safe work practices as required under OSHA Standards for General Industry found under 29 CFR 1910. This training will provide your employees with the knowledge and tools for recognizing and mitigating the hazards most commonly found in your facility or job-site operations. The 30 Hour training is a four day Instructor-led OSHA Outreach
more...
Explosives Safety for Contractor DOD 4145 26M Compliance - Denver, CO


...ning for explosives safety is far more in-depth than what OSHA requires. Students will experience very thorough training in the areas of: Storage; Storage/ Shipping Compatibility; Electrical Safety; Hazards and Hazard Classification; Protective Measures; Housekeeping; Safe Practices; Quantity-Distance; and Fire Protection.
The DOD Contractor's Explosives Safety course is 50 hours of training
more...
Denver, CO - OSHA 10 Hour Construction Outreach


..., 2012 Training Special: Buy 1 Seat in the Instructor Led OSHA 10 & Get a Second 10 Hour Seat at 50% Off.
- - - - - - - - - - - -
The OSHA 10 Hour Training for Construction is an instructor-led training course held in our Denver, Colorado training facility. The 10 Hr. Construction safety seminar is an introductory course that teaches workers hazard recognition and safe work practices in
more...
OSHA 10 Hr. Training for Construction, Denver, CO - Instructor Led




...OSHA 10 Hour Outreach Training for Construction is an instructor-led training course held in our Denver, Colorado training facility. The 10 Hour Construction safety seminar is an introductory course that teaches workers hazard recognition and safe work practices in accordance with OSHA Construction Standards, 29 CFR 1926. A US Department of Labor OSHA wallet card will be obtained for each
more...
HAZWOPER 8 Hour Refresher, Denver, CO


...rams' 8 Hour HAZWOPER Refresher training course satisfies OSHA's HAZWOPER requirement for eight hours annual training as mandated by OSHA 29 CFR 1920. 120. The focus of this course changes yearly to reflect trends and practices, regulatory updates and timely topics. The 8 Hour Refresher seminar is Instructor-Led and takes place in Denver, Colorado.
- - - - - -
OSHA Regulations, 29 CFR
more...
NFPA 70E and Arc Flash Safety, Denver CO



...NFPA 70E and Arc Flash Safety course meets or exceeds all OSHA mandated training requirements under 29 CFR 1910 332 for safety related work practices. The program combines lecture and video presentations that deal with all required elements of the OSHAa s Electrical Safety-Related Work Practices (Subpart S) and the NFPA 70E standards for Electrical Safety in the Workplace. The NFPA 70E /
more...
OSHA 30 Hour Training for Construction, Denver, CO



...OSHA 30 Hour course teaches students the recommended best safe work practices as required under OSHA Construction Standards, 29 CFR 1926. This training will provide your employees the knowledge and tools for recognizing and mitigating hazards most commonly found on a construction site. All participants in the 30 Hr training will receive a copy of OSHA's Standards, 29 CFR 1926, for Construction.
more...
Bloodborne Pathogens - Instructor Led

...erial during their workday. The training course discusses OSHA requirements found under 29 CFR 1910 1030 pertaining to a general explanation of the epidemiology symptoms of Bloodborne diseases, modes of transmission, exposure control plan, Personal Protective Equipment (PPE) and proper disposal of PPE.
The Bloodborne Pathogens training is an Instructor-led course and takes place in Denver, CO.
more...
Basics of Hazardous Material Management
...not familiar with the intricacies of the DOT, Fire Code, OSHA, EPA, and State requirements for the safe storage and use of hazardous materials. This course was developed for the facility managers and supervisors, technicians, engineers and others whose job responsibilities may include overseeing workplace environmental, health and safety and management of hazardous materials. The Hazardous
more...
Safety Manager Training Course



...ning program will introduce the student to the applicable OSHA standards (Health and Safety Programs, Recordkeeping, etc.) and provide insight on how to achieve or maintain OSHA compliance through effective safety management. The Safety Manager training course is Instructor Led and takes place in Denver, Colorado.
Topics of discussion:
- Introduction to OSHA
- Employer/ Employee
more...
Scaffolding Safety




...se covers the following subject areas, in accordance with OSHA Construction Standards found under 29 CFR 1926. 450 Subpart L :
- General Requirements, Scope, Application and Definitions
- Capacity and Platform Construction
- Competent Person for Scaffolding and Responsibilities
- Scaffold Inspection Requirements
- Ariel Lifts
- Training Requirements
- Fall Protection for Scaffold
more...
Oil and Gas 24 Hour Hazard Recognition - Denver, CO


...onnel. The course gives students an overview of pertinent OSHA Construction and General Industry regulations and how they apply to the Oil and Gas Industry. Discussion will concentrate on how adherence to both API and OSHA standards help to create a safer and healthier work environment.
Course Topics:
* Introduction to OSHA, OSH Act, Employer/ Employee Rights
* OSHA Focus Four
more...
From Human Resource & Organisational Development Consultancy (HRODC) Postgraduate Training Institute
Malaysian Industrial Relations and Employment Law Course
...nery Act, 1967
Occupational Safety and Health Act, 1994 (OSHA)
National Council for Occupational Safety and health
Duties of Employers
Safety Policies
Safety Training
Duties of Designers, Manufacturers and Suppliers
Duties of Employees
Regular Medical Examination
Appointment of a Safety and Health Officer
Safety and Health Committees
Notification of Accidents and Occupational
more...
Malaysian Industrial Relations and Employment Law Course
...nery Act, 1967
Occupational Safety and Health Act, 1994 (OSHA)
National Council for Occupational Safety and health
Duties of Employers
Safety Policies
Safety Training
Duties of Designers, Manufacturers and Suppliers
Duties of Employees
Regular Medical Examination
Appointment of a Safety and Health Officer
Safety and Health Committees
Notification of Accidents and Occupational
more...
Oil and Gas Operation for Oil and Gas Non-Technical Staff


...
- National Offshore Petroleum Safety Authority
- OSHA Oil and Gas Well Drilling and Servicing
WorksafeBC Health & Safety Centre for Petroleum
- Health and Safety Executive (HSE)
- Petroleum Industry's Annual Safety Seminar
11. Safety Relief Valves and Rupture Discs
12. Pressure Safety Valves (PSV), Operation and Testing
13. Gaswell blowouts
14. Hydrogen Sulfide
more...
From SureFire CPR
Bloodborne Pathogens
Bloodborne pathogens training for all those who need to be certified! Classes are instructor led and can be given at your location. The course is approved by OSHA and is great for nursing homes, tattoo shops, and others needing bloodborne pathogens in Orange County, Los Angeles, San Diego, and the Inland Empire.
more...
Bloodborne Pathogens
Bloodborne pathogens training for all those who need to be certified! Classes are instructor led and can be given at your location. The course is approved by OSHA and is great for nursing homes, tattoo shops, and others needing bloodborne pathogens in Orange County, Los Angeles, San Diego, and the Inland Empire.
more...
From Lorman Education Services
OSHA's Recordkeeping Rules
...OSHA has been stepping up enforcement ... are you in compliance? /strong
Attend this seminar and get up-to-date information on the latest OSHA regulations and other developments. In one day you will learn what to expect from an OSHA inspection and how records should be handled. You will also learn about the education and training requirements that are needed for employees. Listen to faculty
more...
OSHA's Recordkeeping Rules
...OSHA has been stepping up enforcement ... are you in compliance? /strong
Attend this seminar and get up-to-date information on the latest OSHA regulations and other developments. In one day you will learn what to expect from an OSHA inspection and how records should be handled. You will also learn about the education and training requirements that are needed for employees. Listen to faculty
more...
From The Safety Institute of America
Certified Safety Inspector
Students completing this course walk away with the most comprehensive knowledge of safety inspections. Content includes Federal OSHA 30-Hour core curriculum with a concentration on OSHA and all standards incorporated by reference according to OSHA 1910. 6. The only all-inclusive inspection course on the market. Includes safety inspector practical skills and written examination. Recommended for
more...
Fire Extinguisher Training


Taught by IFSAC Certified Fire Service Instructors, the exciting classroom presentation teaches the basic fundamentals of fire prevention and in the unfortunate event of a fire, safe operation of a fire extinguisher. Live fire training is provided to allow students to experience the application of the fire extinguishing media in a real-life scenario.
more...
Fire and Life Safety
This fundamental course provides a working knowledge of fire and life safety codes, evacuation management, fire prevention plans, fire brigades, fire extinguishing systems and general fire protection as it relates to OSHA, NFPA and the IFC to assist in the identification of fire and life safety threats throughout the work-place. Taught by certified Fire Marshal and NFPA Certified Fire
more...
CPRFirst AidAEDBlood Born Pathogens
A full day of learning the basics. Taught so that the layperson as well as the experienced personnel can learn together, this program will provide the fundementals of the life-saving techniques that have saved thousands of lives in the work-place. This is not your typical cookie-cutter video led program and our instructors know how to turn it on to make the learning process exciting and fun!
more...
Accident Prevention and Investigation



Learning from significant incidents in history, students learn to identify and eliminate safety hazards in the workplace before and accident occurs through the tried and proven techniques such as 5S, 5-Why, Fishbone, etc. A philosophical and theoretical look at the impact of an accident provides the student mental insight to become a finely tuned weapon in your safety arsenal. Students are
more...
DOT Medical First Responder


Brady curriculum, meets DOT requirements. Taught by 10-year EMS veteran and nationally certified Instructor with 18-years experience in emergency response/ general industry safety.
Tuesday/ Thursday (6PM-10PM) course schedule with practical skills and written examination on December 17, 2011
$199/ student includes student manual.
more...
Powered Industrial Truck Operator


Taught by 20-year veteran, The Safety Institute of America's PIT Operator program is the most comprehensive PIT program offered! This course teaches safe operation of PITa s as defined by OSHA and ANSI. Students must successfully complete a written and practical examination. Students successfully completing this course are not guaranteed employment but will have an advantage over others when
more...
Lock OutTag Out



This four-hour instructional module includes a thorough overview of OSHA 29 CFR 1910. 147, practical skills utilizing LO/ TO devices and concludes with a written examination. Students are lead through practical demonstrations of lock out devices and the proper application of each and each student must prove competency in the use of each.
more...
Machine Guarding Principles


Fundamentals of this program include identifying the point of operation, elimination of amputation hazards, methods of machine guarding and acceptable conditions for removing machine guards or working around unguarded machines. A brief overview of lock out/ tag out is also a part of this course.
This training can be custom designed to be site-specific to the needs and machinery of the
more...
FEDERAL OSHA 30-HOUR GENERAL INDUSTRY FIVE DAY COMPLIANCE COURSE



... PROGRAM WITH LESS OF AN IMPACT OR CONTENT??? Our Federal OSHA 30-Hour Compliance Course is taught by 20-year veteran and Federal OSHA Authorized Outreach Trainer who brings excitement and dynamics to the classroom while sharing real-life stories of success and failure in the safety and health field. Students are compelled to learn more by being more involved through this highly interactive
more...
Behavior Based Safety Seminar





A very high impact course for those who want to make an immediate impact on their safety program. Topics Covered: Behavior Based Safety (BBS) Program Elements: Overview of Safety Based Behavior, Establishing a Safety Oriented Culture, Psychosomatic Safety, Achieving a Successful BBS System, Recognition versus Reaction, Modifying the Safety Culture
Why pay $2500 or more? Don't let the price fool
more...
Federal OSHA 30-Hour Compliance Course - FIVE Day Curriculum




...OSHA mandated 30-Hour General Industry curriculum is accompanied by the highly acclaimed Industrial Safety Inspector program to bring a Safety Committee Boot Camp on steroids! This high impact class will teach the art of identifying hazards in the workplace and locating the exact reference according to not only OSHA but all of the consensus standards and those incorporated by reference by OSHA
more...
Federal OSHA 30-Hour General Industry



...ught by 19-year veteran of general industry, this Federal OSHA course provides an exciting insight to the standards required by the Federal OSHA Outreach Training Guidelines. Though others may offer the same course, your experience with The Safety Institute of America will not be matched. Don't miss this opportunity to host this course on-site or attend an open enrollment session scheduled near
more...
Federal OSHA 10-Hour General Industry



Taught by 19-year veteran of general industry, this Federal OSHA course provides an exciting insight to the standards required by the Federal OSHA Outreach Training Guidelines. Though others may offer the same course, your experience with The Safety Institute of America will not be matched. Don't miss this opportunity to host this course on-site or attend an open enrollment session scheduled near
more...
Safety Train-the-Trainer
Finally, a course that provides the necessary tools to create, deliver and implement effective training programs. Through this course, students learn the do's and don'ts of using multimedia such as PowerPoint, student management and classroom set-up. Aren't you tired of the rolling eyes and heavy sighs when you mention 'safety training'? (Incluudes student manual and CD Rom filled with safety
more...
Safety Committee Boot Camp with OSHA 10-Hour




...earn the art of hazard identification through the Federal OSHA 10-Hour program and critical modules of the renowned Industrial Safety Inspector program. Students who completing this program are well tuned to function as a true extension of the overall safety program as they should. (Includes student manual, Federal OSHA 10-Hour Pocket Card, Pocket Digest of OSHA Standards and Certificate of
more...
Powered Industrial Truck PIT Instructor


... powered industrial truck related accidents. According to OSHA, an estimated 25% of accidents are caused by a lack of or inadequate training.
In this comprehensive Powered Industrial Truck Instructor course, you learn more than a system. Successful completion of this course provides the tools necessary to manage a powered industrial program that reduces workplace fatalities on a daily
more...
From Medical Survival Consultants
CPR for the Healthcare Provider Certification-Basic Life Support (BLS)




Do you work in a healthcare setting?
This CPR course is designed for the Healthcare Provider and those in the healthcare setting.
The course will be held at Medical Survival Consultants North Dartmouth facility in the Faunce Corner office park in the heart of the Greater New Bedford Area within the Southcoast area and close to Rhode Island.
This course covers all aspects of CPR including,
more...
Bloodborne Pathogens Infection Control
...virus and hepatitis B virus. Designed to meet the current OSHA training requirements, Bloodborne Pathogens was created for students and employees who have potential for occupational exposure to blood or other potentially infectious materials, and even has supplemental information on airborne pathogens such as tuberculosis. Has been completely revised and updated to comply with the 2005
more...
Workplace Safety Health Management


Course: Workplace Safety & Health Management
The Safety & Health Management Course is designed for those working in a variety of workplace settings from manufacturing, retail, shipping and distributing to healthcare, long-term nursing homes, hospitals, and ancillary facilities.
This course is based on the most current OSHA (Occupational Safety and Health Administration) guidelines for
more...
Behavior Based Safety



...ine resources for our e-learning courses. Courses include OSHA compliance, Industrial Safety, and Workplace Safety for all industries and work environments. The workplace safety courses are offered based on the latest OSHA (Occupational Safety Health Association) guidelines. Medical Survival Consultants covers a wide range of courses for those seeking to keep up-to-date with their workplace
more...
From 6P International, LLC
Bloodborne Pathogens Awareness
The Bloodborne Pathogens awareness program includes information that will help students understand what bloodborne pathogens are and how risks of exposure can be reduced for themselves and others. The program assists in satisfying the training requirements of the U. S. Department of Labor, OSHA Bloodborne Pathogens Standard.
more...
From Medical Survival Consultants
Workplace health and safety management


...ary facilities. This course is based on the most current OSHA (Occupational Safety and Health Administration) guidelines for workplace safety. The seminar is offered to the public a few times a year with the majority of courses throughout the year offered to (one or a group of) companies that contact MSC seeking to have a course offered for their facilities.
Target Audience
more...
CPR for the Healthcare Provider Recertification-Basic Life Support (BLS)



Do you work in a healthcare setting?
This CPR course is designed for the Healthcare Provider and those in the healthcare setting.
The course will be held at Medical Survival Consultants North Dartmouth facility in the Faunce Corner office park in the heart of the Greater New Bedford Area within the Southcoast area and close to Rhode Island.
This course covers all aspects of CPR including, AED,
more...
From Biologix Solutions LLC
Onsite In-Person Blood borne Pathogens Training in Chicago Area









Biologix Solutions LLC, a leader in customized healthcare training and consulting solutions is offering Onsite Group Bloodborne Pathogens Training for Tattoo & Piercing Shops, Healthcare & Laboratory Workers, Schools & Daycare Centers & General Workplace.
All trainings are developed and presented by experienced infectious disease epidemiologist, includes multi-media slides and video
more...
From Radiofrequency Safety International Corporation
live RF Safety


... to designing and developing an RF Safety Program (RFSP). OSHA requires a comprehensive RF program, to include training. Through RSIa s BMP live course, and the easy to formulate customized online RF safety plan, attendees will be armed with the tools necessary to achieve the complete program! This course meets all requirements for RF safety certification; and by attending, participants
more...
From SETTEC
OSHA Construction Industrial

Technical demonstration to conduct general industry out reach training in accordance with guidelines provided by the Occupation Safety and Health Administration (OSHA).
more...
OSHA General Industrial

Technical demonstration to conduct general industry out reach training in accordance with guidelines provided by the Occupation Safety and Health Administration (OSHA).
more...
Forklift Safety

Technical demonstration to conduct general industry out reach training in accordance with guidelines provided by the Occupation Safety and Health Administration (OSHA).
more...
From Radiofrequency Safety International Corporation
RF Train the Trainer

...riety of subjects -->
This course includes an approved OSHA 10 hour General Industry Outreach Training Program Curriculum presented by Authorized Trainers. Participants will receive a completion card from OSHA along with a wallet card from RSI when they complete the RF Train-the-Trainera course.
We recommend that any Personnel Managers, RF Safety Personnel, Designated Persons*, Site
more...
From Everrise Training & Consultancy
THINKING OUT OF THE BOX
INTRODUCTION
Innovation, adaptability and flexibility of response are critical ingredients for organizational survival; they are equally relevant for individuals. For both organizations and people, continuous learning is a precondition for prosperity, not only to keep up with rapid changes but also, to set new standards in performance and growth. This program begins on the premise that
more...
EMPOWERING YOUR SAFETY HEALTH COMMITTEE
...OSHA 1994, any employer with more than 40 employees is required to establish a Safety and Health Committee at the workplace where both employer and employees undertake the responsibility in implementing safety and health program at their workplaces.
The main objective of this training is to give a systematic and procedural view and approach to the Safety Committee members on their roles and
more...
From e-Hazard Management
Electrical Workplace Safety NFPA 70E Low Voltage Arc Flash Training



8 Hours (Regional Seminar or Onsite)
This practical one-day Arc Flash Training course provides a comprehensive understanding of safe electrical workplace practices in accordance with OSHA and NFPA 70E-2009 regulations and guidelines.
more...
From Forklift Certification Specialist
Forklift Certification On-site Training-Spanish




... para ayudarte a obtener tu certificaci n, exigencia de OSHA
SE ENTRENA EL ENTRENADOR PARA EL CURSO
COMPRE EL CURSO COMPLETO DE OSHA
CLASES DENTRO DE LA COMPA A
Ofrecemos el entrenamiento mas detallado por la ley 22 de OSHA mandatario a todos los que operan el montacargas. Nuestro programa es f cil y accesible a su horario. Es tambi n el mejor precio en cualquier programa de
more...
Forklift Certification On-site Training



...ning is one of the simplest ways companies can accomplish OSHA required training without having to send their employees anywhere.
Our trainers come to you! We bring all the materials and take care of all of the paperwork. Wallet ID cards are valid for 3 years (OSHA maximum) and can be updated to include new types of forklifts.
Each operator will receive:
A Wallet ID card
A
more...
Forklift Certification


...OSHA Compliant Forklift Certification Class. 1316 Motor Circle, Dallas TX 75207. 817-770-7875 We hold classes Monday through Saturday. Operators receive their certification on the same day as training. Wallet ID cards are valid for 3 years (OSHA maximum).
Certified forklift drivers are in demand! Increase your chances of getting a job by adding an OSHA forklift certification to your resume.
more...
From Nursing Unlimited Incorporated
HIV/AIDS/OSHA TB for the Healthcare Workers

...lity. This dynamic course meets the state HIV and federal OSHA* regulations regarding training for health care professionals. The course is broken into two segments. The first segment involves two hours; 1 hour on OSHA Bloodborne & Airborne Pathogens including TB and 1 hour on the HIV update.
The second segment is a 2-hour continuation of HIV for those professionals who have never taken a
more...
Domestic Violence

Course Overview
Since domestic violence occurs in approximately one out of three intimate relationships, both heterosexual and homosexual, chances are great that any healthcare provider will encounter both victims and perpetrators of domestic violence on a routine basis. Providers must realize that ignoring domestic violence is essentially an act of collusion with the perpetrator. The price of
more...
Prevention of Medical Errors for RNs and LPNs

Course Overview
Today, more people in the United States die from medical errors than from motor vehicle accidents, breast cancer or AIDS. While not all adverse patient outcomes are due to medical error, medical errors represent adverse outcomes that are preventable with our current state of medical knowledge. It is therefore imperative that all healthcare professionals recognize the factors
more...
Phlebotomy
...clude anatomy and physiology, the venipuncture procedure, OSHA guidelines on preventing the spread of infectious diseases, and an in-depth, hands-on workshop with return demonstrations of professional use of equipment, special collection procedures, and complications of phlebotomy.
Some of the Objectives Include:
1. Identify the cellular and plasma components of blood.
2. List the
more...
From Termark Technical Institute
NICET R Fire Alarm Technician - Level II -Certification Exam Prep Course
This tree day action packed course covers Fire Protection Plans and Symbols, Basics of System Layouts, Electrical Installation Standards, Basic Fire Alarm Systems, Supervisory Service, Detection Methods, Detector Spacing, Power Supplies, System Acceptance, Periodic Testing, Construction Plans, Specifications and Cost Estimates of a mock job, Building Codes, Contracts, Governmental Agencies, OSHA
more...
From Occupational Safety Training Institute
Occupational Safety Trainer
...ponsibilities concerning employee safety and the relative OSHA Standards. The purpose of this training course is to provide you with an overview of the basic knowledge and skills needed to become a successful safety trainer. Information relevant to planning, preparing, presenting, and evaluating classroom training is the foundation of this course. Students are required to conduct a training
more...
From Gemstech Institute
best autocad mep hvac designing training in india safety training institutes in india hyderabad







... INSTITUTION
ISO CERTIFIED 9001 2008
OFFER COURSES :
OSHA 10/ 30 HOurs USA Govt. Approved
FIRE AND SAFETY ENGINEERING ( International Diploma )
HEALTH SAFETY ENVIRONMENT ( International Diploma )
HVAC, DESIGNING ( International Diploma )
MEP DESIGNING ( International Diploma )
MCSE, MCP, CCNA, CCNP, CCIE, ( Boot Camp )
A+ , N+, ADVANCE HARDWARE & NETWORKING
International AUTOCAD,
more...
OSHA Safety Course 30 Hours 10 Hours Approved by USA Govt
...OSHA USA Authorised Centre
OFFER TRAINING :
OSHA Safety Course 10/ 30 hours ( USA Govt. Approved )
FIRE AND SAFETY MANAGEMENT ( International Diploma )
HEALTH SAFETY & ENVIRONMENT (HSE) ( International Diploma )
Oil & Gas SAFETY & ENVIRONMENT (HSE) ( International Diploma )
Food SAFETY ( International Diploma )
Construction Safety ( International Diploma )
Industrial Safety (
more...
best hse training institutes in india hyderabadfire and safetyhse training in india
GEMSTECH INTERNATIONAL
(RECOGNIZED BY GOVT)
ISO 9001 2008 CERTIFIED
OFFER COURSES :
MCSE, CCNA, CCNP, A+.N+.,COMPTIA.,
FIRE AND SAFETY,
OSHA TRAINING 10/ 30 HOURS
HEALTH AND SAFETY (HSE)
AutoCAD, HVAC MEP Design,
Advance WEB Designing / Graphic Designing a
TALLY ADVANCE, PEACH TREE,
AMERICAN ACCOUNTING ETC..,
Free Dubai Jobs Placements Assistance 100% NO HIDDEN CHARGES .,
more...
From Electrical Training USA
ON-SITE ARC FLASH TRAINING SEMINAR
...s a practical understanding, in everyday language, of the OSHA requirements that are mandated under CFR 29 - 1910 (Occupational Safety and Health Standards) covering the servicing and maintenance of machines and equipment. Included are:
Lockout / Tagout
1910. 331 - Scope
1910. 332 - Training Requirements
1910. 333 - Selection and Use of Work Practices
1910. 334 - Use of Equipment
1910.
more...
From Gemstech Institute
fire and safety training institute in india best college in india
... DIPLOMA
HEALTH SAFETY ENVIRONMET INTERNATIONAL DIPLOMA
OSHA 10 HOURS ( USA Dept. of Labor )
OSHA 30 HOURS ( USA Dept. of Labor )
ACCOUNTS TALLY, FOCUS, WINGS, PEACHTREE
A+ N+ MCITP CCNA CCNP CCIE
ADVANCE HARDWARE & NETWORKING
AUTOCAD, 2D/ 3D Max
HVAC, MEP DESIGNiING iDIPLOMA.
ADVANCE WEB DESIGNING iDIPLOMA.
GEMSTECH International Learning Centre The Premier Institute for
more...
best health safety environment course colleges in india









GEMSTECH-INTERNATIONAL-INSTITUTE
OF ADVANCE ENGINEERING SCIENCE & I T
A CAREER ORIENTED INSTITUTION
OFFER COURSES PROFESSIONAL, ENGINEERING
DIPLOMA-CERTFICATE PROGRAMMES
FIRE AND SAFETY ENGINEERING
HEALTH SAFETY ENVIRONMET ( HSE )
PG / ADVANCE DIPLOMA
ACCOUNTS TALLY, FOCUS, WINGS, PEACHTREE
ORACLE FINANCIAL, American accounting
SAP FiCO, MM. BW, BI, ABAP,
more...
From Electrical Training USA
OSHA 10-Safety Training for Construction
...OSHA requirement for 10 hour safety training for the construction
industry. Attendees will each receive a 10 hour safety training card from OSHA. For the full
30 hour OSHA safety training seminar (recommended for managers and supervisors) click this link.
OSHA 10 hour training seminar objectives:
This seminar is designed to provide instruction on the construction industry safety and
more...
ELECTRICAL CROSS-TRAINING FOR MECHANICS
This 3-day cross-training electrical seminar is designed to enable plant mechanical maintenance personnel to perform very basic electrical maintenance functions including field testing, connecting, and powering up 3-phase and 1-phase electrical motors and safe procedures for testing and replacing fuses, and resetting motor overload relays. Basic motor starters and 3-phase motor connections are
more...
From Gemstech Institute
safety course providers in india dubai kenya cameroon
OFFER TRAINING :
FIRE AND SAFETY MANAGEMENT ( International Diploma )
HEALTH SAFETY & ENVIRONMENT (HSE) ( International Diploma )
HVAC MEP Designing, Drafting ( International Diploma )
ADVANCE WEB DESIGNING / GRAPHIC DESIGNING, ( International Diploma )
ADVANCE BUILDING DESIGN ( International Diploma )
AUTOCAD 2D/ 3D ( International Diploma )
OSHA training 10/ 30 hours
ADVANCE COURSES
more...
fire and safety course in india hyderabad
...al Diploma )
AUTOCAD 2D/ 3D ( International Diploma )
OSHA training 10/ 30 hours
ADVANCE COURSES DIPLOMA./CERTIFICATES .
INTERIOR DESIGNING
CONSTRUCTION ENGINEERING
FIRE AND SAFETY MANAGEMENT
HEALTH SAFETY & ENVIRONMENT (HSE)
HVAC MEP Designing, Drafting
ADVANCE WEB DESIGNING / GRAPHIC DESIGNING,
ADVANCE BUILDING DESIGN
AUTOCAD 2D/ 3D
SAP>FICO,
MCSE CCNA CCNP , A+,N+
TALLY
more...
best hse training colleges in india hyderabadfire safety training institutes in india hyderabad
... one sitting
FIRE AND SAFETY, International Diploma
OSHA TRAINING 10/ 30 HOURS
HEALTH AND SAFETY (HSE) International Diploma
Web designing graphic designing
Animation 2d 3d
Movie making
Cartoon designing
Game designing
MCSE, CCNA, CCNP, A+.N+.,COMPTIA.,
AutoCAD, HVAC MEP Design,
Advance WEB Designing / Graphic Designing a
TALLY ADVANCE, PEACH TREE,
more...
qhse training in india dubai fire safety training in india dubai
GEMSTECH INTERNATIONAL INSTITUTE
OF ADVANCE ENGINEERING SCIENCE & IT
(RECOGNIZED BY GOVT )
ISO 9001: 2008 CERTIFIED
OFFER TRAINING :
ADVANCE COURSES DIPLOMA./CERTIFICATES .
FIRE AND SAFETY
HEALTH SAFETY & ENVIRONMENT (HSE)
HVAC MEP Design, Eng, & Drafting
Advance WEB Designing / Graphic Designing,
Interior Designing
Advance Building Design
AutoCAD 2D/ 3D
SAP>FiCO, ETC.,
MCSE
more...
hse training in indiadubaifire safety training in india dubai
GEMSTECH INTERNATIONAL INSTITUTE
OF ADVANCE ENGINEERING SCIENCE & IT
(RECOGNIZED BY GOVT )
ISO 9001: 2008 CERTIFIED
OFFER TRAINING :
ADVANCE COURSES DIPLOMA./CERTIFICATES .
FIRE AND SAFETY
HEALTH SAFETY & ENVIRONMENT (HSE)
HVAC MEP Design, Eng, & Drafting
Advance WEB Designing / Graphic Designing,
Interior Designing
Advance Building Design
AutoCAD 2D/ 3D
SAP>FiCO, ETC.,
MCSE
more...
From The Jacman Group
NFPA 70E Electrical Arc Flash Safety Training
...OSHA fines
Implement NFPA 70E for Electrical/ Arc Flash Safety
This training covers OSHA Regulations
CFR 29 1910. 331 - 1910. 335
This is a 2-day comprehensive training seminar for anyone working on or near energized equipment.
Each student is tested and awarded a certificate upon successful completion.
This training is specially designed for both qualified and unqualified
more...
From Associated Builders and Contractors, Golden Gate Chapter
Continuing Education
ABC Golden Gate is dedicated to providing education and training throughout the careers of the construction workforce. Because the construction industry changes and becomes more challenging every day, constantly training and educating your workforce is essential to staying ahead. ABC Golden Gate is constantly looking for ways to help members keep pace with this ever-changing industry by offering
more...
From Forklift University
Forklift 102
Forklift Drive training program for individuals that want to be certified and learn to safely drive a forklift but have no hands on experience.
The class is a full day of safety training, hands on driver training, pallet placement, maneuvers and other skills required to become a safe and experienced forklift operator.
more...
From Firefighter Safe, LLC
First Aid Training
Basic First Aid
ASHI Basic First Aid for the Community & Workplace program is designed for individuals in the community that require or desire a basic knowledge and first aid skills. This extremely flexible program will help employers meet OSHA and other federal and state regulatory requirements for training employees how to respond and care for medical emergencies at work. Two year certification
more...
CPR Training
Students learn how to recognize a life-threatening emergency, how to provide basic life support and what to do in case of an airway obstruction or choking. Includes Adult, Child, Infant CPR and AED training. This training is approved by OSHA and Ohio Department of Job and Family Services. Certification is good for 2 years.
more...
From Ellis Engineering, LLC
30 Hour Osha Training for General Industry
...OSHA Outreach Program but is the 30 hour program instead of the 10 hour program. It is part of the overall Safety training needed for VPP recognition and is a good practice for all workers and supervisors in an industrial and in some commercial settings. The primary focus for the training covers 29 CFR 1910 series pertaining to Working and Walking surfaces, Hazard Communication, Hazardous
more...
OSHA General Industry 10 Hour Course


...OSHA Outreach Program. It is part of the overall Safety training needed for VPP recognition and is a good practice for all workers and supervisors in an industrial and in some commercial settings. The primary focus for the training covers 29 CFR 1910 series pertaining to Working and Walking surfaces, Hazard Communication, Hazardous Materials, Personal Protective Equipment, Machine Guarding,
more...
From American Trainco
Arc Flash Protection Electrical Safety
...n NFPA 70E, which has become the new standard for meeting OSHA training obligations under CFR1910. 331-335, students attending this course will gain an immense respect for the power of electricity. They will learn about personal safety for working on or around electrical systems and equipment, how to use proper materials and procedures for doing electrical work - and the potential consequences
more...
From AVO Training Institute
Electrical Safety for Industrial Facilities

...OSHA mandated training requirements of 1910. 332 and .269. This course is designed to increase safety awareness and improve safe work practices for industrial electrical workers who maintain electrical equipment and systems within the low and medium voltage ranges. It also addresses voltages as low as 50-volts for
control circuits, motor circuits, and other premises wiring systems that are
more...
OSHA Electrical Safety Related Work Practices

This facilitated training course is designed to meet the minimum mandated training requirements specified in OSHA 29CFR 1910. 331-.335 for those employees classified as qualified which work on or near exposed electrical parts operating at 50 volts or more, or for those employees classified as unqualified but are exposed to electrical hazards during their job duties.
more...
NFPA70E Electrical Safety Requirements

...eting the safety training requirements of NFPA 70E ®, OSHA 29 CFR 1910. 332, and the NEC ® requirements for a qualified person as defined in Article 100. This course will focus on the NFPA 70E ® with additional information on the hazards of electrical shock, arc, and blast along with the general requirements for electrical installations. The NFPA 70E ® requirements for
more...
Electrical Safety for Inspectors

...al shock, arc flash, and arc blast along with the current OSHA and NFPA requirements for electrical safety, which are needed to effectively conduct industrial electrical safety inspections. Electrical protective device coordination and short-circuit analysis are discussed as they relate to the Flash Hazard Analysis required by NFPA 70E. The basic principles and concepts of electrical
more...
Electrical Safety for Utilities

...OSHA requirements for Qualified electrical workers are the focus for this electrical safety course. Students will learn current requirements for working on or near energized electrical circuits and equipment that are energized above 600 volts. Emphasis will be placed on generation, transmission, and distribution type installations. Investigation of the hazards of electricity and how to properly
more...
Arc Flash Compliance

This course will introduce the student to the Electrical Arc Flash Hazard. Upon completion, the student will understand what causes an arc flash, what the regulations and standards say about arc flash hazard and the reasons for performing an arc flash hazard analysis. The student will learn what information is required for an arc flash analysis. The student will be introduced to terms such as
more...
From Faithful Guardian Training Center
EMT Bootcamp
This is a high intensity fast paced 4 month EMT-Intermediate Course. Our bootcamp course will start March 21st, 2011 at 9 am. Upon completion of this course you will be certified to test as a National Registry EMT Intermediate. There are very few spots left in this course. Contact out office for more details at (770) 214-2252.
more...
EMT-Intermediate Course





We have an EMT-I Course starting November 1st at 6 pm.
We have very few spots left!!!!!!! This is a 6 month course that will have you certified as an EMT-Intermediate.
For more information call our office at 770-214-2252.
Bring a copy of this ad when you come to register for class and receive a free Blood pressure cuff and Stethoscope!!!
more...
From Leads Learning And Development Services
Occupational Health and Safety Assessment Series (OHSAS) 18001 Certification

... Policy
Formulation
Commitment
Review
OSHA 1994 requirements
Planning
Planning for hazard identification,
risk assessment and risk control
Legal requirements and other
controls
Objectives
OH&S management programs
Implementation and Operations
Structure and responsibility
Training, awareness and
competence
Consultation and communication
more...
From Texas OnSite CPR
American Heart Association Heartsaver First Aid-CPR-AED Certification
HeartSaver First Aid is our most popular class with Industry and Commercial Businesses. This course teaches how to manage illness and injuries in the first few minutes until professional help arrives. Course content includes General Principles of First Aid, Medical Emergencies, Injury Emergencies, CPR, AED, and Environmental Emergencies.
This class covers a lot of topics, from heart attacks to
more...
From Southeastern School of Health Sciences
Phlebotomy Technician
This course is designed to instruct and develop the skills of the medical professional in the science of veni-puncture. The curriculum is designed to meet the standards of the National Healthcareer Association, a national certifying agency of Phlebotomy Technicians. The student will receive instruction in identifying equipment and supplies used to obtain a routine venous specimen, urinalysis,
more...
From Forklift Training Pro
Forklift Safety Training Train the Trainer Course


...mply with the site and equipment specific requirements of OSHA
a Create a forklift operator safety training program specific to your company
Course Pre-Requisite: Certified, Competent or qualified forklift operators
This one day Train-the-Trainer class is based on the highly successful training software Forklift Training Pro 2008 and will be geared to the major training issues faced
more...
From Mobile Equipment Training Inc
Overhead Crane Operator Training
...evention
Overhead Crane hazards
Introduction to OSHA / ANSI
Code of Ethics for Overhead Crane Operators
Types of Cranes
Types of Hoists
CMAA Crane Duty Classifications
HMI Hoist Duty Classifications
Crane design
Power Systems
Control Systems
Capacity limitations
Crane and hoist safety
Hand signals
Pre-use inspection
more...
Certified Rigger
This program consists of classroom instruction, audio, visual aids, hands on applications and challenging workshops. Students receive all course study material, reference manuals, rigging reference cards a Transcript of their performance and successful completion is required for certification. Course can be held at your facility with your rigging and your procedures, or at our facility. Students
more...
From RPT Safety & Health Services, Inc
The FailSafe Workplace Sustainability System Seminar



The FailSafe Workplace Sustainability System, based on the principles and practices of Human Performance Technology (HPT),is a high impact/ low cost management strategy that easily integrates with any compliance, beyond compliance, or VPP initiative. This three day course will equip participants with 30 tools that can be used to target and mitigate "acceptable" risks that thwart program
more...
From Wulf Educational Services
OSHA 30 Hour Construction Safety

...OSHA Thirty Hour Construction Safety Classes
WES is offering monthly OSHA 30 Hour Construction Safety classes in the Denver metro area. These classes can be taught in English and Spanish for those diverse work forces and can be taught at your workplace or at our facility depending on client need. We offer standard 30 hour courses and special employer selected topic classes. The typical
more...
From SafeTek USA
OSHA10
... Outreach Training program meets the criteria outlined by OSHA s outreach training initiative. This program is ideal for all construction workers, including project managers and superintendents. Each worker who completes the course will receive a completion card from the Department of Labor. Although many safety topics are covered in this program, it should be noted that construction workers,
more...
From Wulf Educational Services
10 Hour OSHA Construction Safety
...OSHA Ten Hour Construction Safety Classes
WES is offering monthly OSHA 10 Hour Construction Safety classes in the Denver metro area. These classes can be taught in English and Spanish for those diverse work forces and can be taught at your workplace or at our facility depending on client need. We offer standard 10 hour courses and special employer selected topic classes. The typical classes
more...
From Arbrit Safety Solutions
Osha training



...Osha 30 hrs outreach training program at delhi. This training in devided in 2nd major unit: 1. Construction Industries 2. General Industrie.
Topics:
Introductionof osha,
Excavation,
Scaffolding,
Welding,
Ppe,
Pfas,
Electrical safety & system,
Ladders etc.
TrainingFor all Environmental Safety & Health Practitionar and for those who wants to come in Safety organization.
more...
From Orange Co CPR
Heartsaver AED Training


Why AED/ CPR Training?
If more people had CPR/ AED training, the number of individuals who die from sudden cardiac arrest could be dramatically reduced. That's the word from the American Heart Association, which is calling for renewed efforts to learn CPR. Since the odds of surviving cardiac arrest drop 7 percent to 10 percent every minute without CPR, resuscitation has a big impact on survival.
more...
From Action Workplace Services
Heartsaver CPR, AED, First Aid


...l. This course will assist you in meeting state & federal OSHA Training standards for the workplace. Certification is good for 2 years and wallet cards are issued after the class. Student to Manikin ratio is 1 to 1. CPR Barriers are available for purchase at the end of the class.
more...
From Orange Co CPR
First Aid


... procedures including the first-aid skills recommended by OSHA in a format that can be delivered in a single day. It also offers elective modules in environmental emergencies.
Its highly effective video-based-instruction format enables students to experience case-based scenarios in a realistic setting. Instructors introduce a topic, then show a video segment to present cases for discussion
more...
From Wichtia First Aid Training
CPR AED



CPR / AED covers adult, child and infant CPR and the use of an automatic external defibrillator (AED). Basic skills and lots of practice help you master important skills. This course, from the American Safety & Health Institute (ASHI) is perfect for parents, child care providers and camp/ youth staff. This is not a health care provider CPR course.
more...
Basic First Aid



Basic First Aid covers the response to critical injuries and illnesses. This course focuses on basic skills such as bandaging, splinting and assessing an ill or injured person. Special emphasis on pediatric emergencies. Perfect for parents, child care providers and camp/ youth staff. Includes course lecture, skill training, discussion of real world application and scenarios.
more...
From Technical Skills Development Svcs.
2009 NFPA 70E Arc Flash Training


Technical Skills Development Services Inc. specializes in on-site (at your location) 2009 NFPA 70E Electrical Safe Work Practices and related Arc Flash Safety compliance training.
Our Company employs only experienced, qualified trainers who have spent decades in the electrical installation and maintenance trades before transitioning into training professions.
Technical Skills Development
more...
From Anfeald, LLC
OSHA Outreach Training 10-Hour Construction


...OSHA Outreach Courses carefully follow the curriculim mandated by OSHA. Anfeald trainers have many years of occupational safety and health experience and are dedicated to creating the best possible learning experience.
Certificates of completion and Department of Labor/ OSHA course-completion cards are issued to each participant that successfully completes the course. Course completion
more...
From First Aid-AZ
CPR-AED Only Certification Class




This course focuses on Primary Care (CPR) through a combination of knowledge development, skill development and realistic scenario practice to make sure participants have the confidence in their ability to provide care when emergency situations arise.
This course meets OSHA requirements for CPR preparedness in the workplace as well as the requirements necessary for those seeking a refresher
more...
From Q-safety Compliance Consultants
OSHA 30 HOUR OUTREACH TRAINING PROGRAM
...OSHA 30 hour training for construction course description:
OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. This course is designed for construction workers, foremen, job supervisors, and anyone involved in the construction industry. Workers must receive additional training, when required by OSHA
more...
OSHA 10 HOUR OUTREACH COURSE - CONSTRUCTION INDUSTRY
This course serves as a newhire orientation in Construction Safety, but was designed by the US. Dept. of Labor-OSHA as a Occupational Safety & Health Training course in Constuction Safety & Health. OSHA requires emloyers to provide safety training & a jobsite free of recognized hazards, and violations to their employees before starting work. Students upon completion will receive a D. O. L-OSHA
more...
From The CPR School, LLC
American Heart Association CPR BLS AED First Aid
Date / Time: Saturday September 11, 2010 @ 10am
Registration begins at 9: 30am
Basic CPR Class: $ 45. 00 per person
This class addresses rescue breathing and cardiac emergencies in caring for adults, children, and infants. All students will be trained in the use of Automated External Defibrillators (AEDs), disposable gloves and CPR masks / breathing barriers. Other topics include the
more...
From Videoguard Integrated Technologies, Inc.
VSSE - Video Security Systems cctv Essentials
...ed to do the job properly and the portions of the NEC and OSHA that are relevant to our trade. We examine the elements that allow us to design, sell, install, test, commission, train and trouble-shoot a complete system in a safe and professional manner.
Each person will have the opportunity to properly back-focus and focus lenses, attach BNC and RJ45 connectors, port-forward a router,
more...
From Mobile Fire Extinguisher, Inc.
Fire Extinguisher Training
Using a fire extinguisher can be intimidating for some. Help eliminate fear and improve your company's safety. Learn how to use the correct extinguisher for different types of fires: Type A-wood/ paper, Type B-oil/ gas, Type C-electrical & Type D-metal fires. Hands-On training helps employees become confident in handling fire extinguishers and shooting them off correctly to properly extinguish a
more...
From QESH Integrated Consultant
Environment Safety Health

... Analysis
HAZOP and HAZAN
Factory & Machinery Act 1967
OSHA Act 1994 & Regulation
Pesticide Safety
CSDS & Safe Chemicals Handling
Chemical Spill & Response
Emergency & Response Plan
Accident and Incident Investigation
Accident Prevention Program
Fire Safety and Evacuation Plan
Electrical Safety and Log-Out-Tag-Out
Personal Protection Equipment (PPE)
Hearing Conservation &
more...
From Alliance Safety Management Services Sdn Bhd
BASIC OSH for WORKERS


It has always been taken for granted that SAFETY is the sole responsibility of the Safety Department or the Safety Officer. This has led to much complacency among the management and workers on Safety matters. In order for this effectiveness, the Management must play a major role in implementing and monitoring the OSH system requirements while the Workers play a role in following the set Safety
more...
From R House Health & Safety
Universal First Aid
First Aid for the Lay rescuer.
Includes Bleeding, shock, Burns, Fractures, Specific Body Injuries, Sudden Illness, Bites, and Environmental emergencies.
more...
From New England Crane School LLC
Qualified Signal Person and Basic Rigging
This one-day class meets the 2010 OSHA requirement for qualified signal persons and riggers on crane and derrick construction sites.
more...
Crane Operator Test Preparation and Accredited Licensing
...OSHA does not require operators to be licensed until 2014, many safety directors and insurance companies, and some States, are requiring certification now. Certification can make the difference between getting the job and losing it to your competition.
We offer test preparation classes and testing through the CIC (Crane Institute Certification), with public classes scheduled throughout New
more...
From Mega Yield Management Consultancy
List of training programs
...lementing OHSAS 18001
b) OHSAS 18001 Internal Audit
c) OSHA & Safety Committee Awareness
d) Basic Workplace Safety & Chemical Safety Program
e) Hazard Identification, Risk Assessment and Risk Control
f) Incident Investigation and Corrective Action
g) Safety and Health Committee Empowerment
h) Fire Fighting Awareness
i) Electrical and Mechanical work safely
j) Fork Lift Safety Training
more...
From Key-kits
GISD GENERAL INDUSTRY SAFETY DIPLOMA





... in the course to help you think about how complying with OSHA regulations keeps you safe and prevents injuries on the job site.
Then, in the interactive workshop, you become familiar with the safety regulations.
The student must pass all exam with a minimum score of 70% or greater. Quizzes and the final exam may be taken multi times if necessary to pass.
Certificates:
Upon complete
more...
From CPR First Aid Training of Ohio
Bloodborne Pathogens
Is a awareness program includes information that will help students understand what bloodborne pathogens are and how risks of exposure can be reduced for themselves and others. The program assists in satisfying the training requirements of the U. S. Department of Labor, OSHA Bloodborne Pathogens Standard.
We use the AHA 2010 standard.
more...
From Team Life Inc
EMS Safety Course - NAEMT
EMS Safety covers safety in emergency vehicles, at the operational scene and while
handling patients, as well as patient, practitioner and bystander safety and personal health. The course offers an overview of current issues surrounding safety in EMS, presents and discusses case studies, builds risk assessment and decision making skills and provides an opportunity for participants to relate their
more...
From Clinical Solutions Medical Training
Phlebotomy Accredited Course
...Physiology of the circulatory system, safety precautions, OSHAa s needlestick injury precautions, Infection Control, with explanation and hands on practice with various Phlebotomy equipment. Techniques, specimen identification and handling, Venipuncture in Pediatrics, Fingerstick puncture are also coverd in this course.
Please call 1-877-243-8885 or visit our website at www.
more...
From Industrial Compliance Services
OSHA Industrial Forklift Certification
Become Certified to operate Forklifts in 1 Day!
Live Certified Instructors NOT a 20 minute Video!!!
All Experience levels welcome
Courses Mon-Saturday 10AM and 1 PM
All Certifications are valid for 3 years!
One price for all industrial forklifts!!
Ask about our discount for the Unemployed!
Cursos en espanol!!
Dona t be fooled by companies that promise job placement or leads for a
more...
From CPR Aces
Blood-borne Pathogens
Heartsaver Bloodborne Pathogens Course. This course is designed specifically for those in the workplace/ health and safety market who must be trained annually in bloodborne pathogens per OSHA standard 1910. 1030
more...
From AcuTech Consulting Group
Best Practices in Process Safety Management
...understanding of the process safety elements regulated by OSHA and EPA, as well as those programs from leading organizations, such as AIChE and API. Topics covered include Mechanical Integrity, Operating Procedures, Process Hazard Analysis, Management of Change, and more. The course includes background, requirements, interpretations, clarifications and implementation examples for PSM
more...
From Fire and Safety Forum
HSE Training with 5 Day industrial Visit HSE certification from ISO 9001-2008 Certified Organization
Entry level / up gradation training in Health safety and environment management, classroom trainings and industrial visit of 5 Days, conducted by experienced authorized trainers from different industries, covering more than 30 HSE topics in the following disciplines
HSE Audits
Safety Culture
Duties of Safety Officer
Confined Space
Work Permit Systems
Industrial Hygiene and Health Hazards
more...
From Enviroworld Consulting, LLC
ABC Spill Response Training
Course will comply with EPA training and OSHA requirements for gas station workers and UST owners/ attendants. Safety and Spill Response Procedures will be covered.
more...
Hazwoper 8 Hour Refresher Course
...OSHA 29 CFR 1910. 120 requirements. I will come to your site or mine...Only $125/ student
Enviroworld Consulting, LLC
Call 618-233-7646
This course meets the requirements in OSHA 29 CFR 1910. 120 for eight hours of annual refresher training for workers at hazardous waste sites. This course is designed for general site workers who remove hazardous waste or who are exposed or potentially
more...
From Mina Resources Sdn Bhd
safety and Health Officer Certifice SHO

A safe and healthy work environment is one of the minimum requirements which is both legally and ethically desirable. However, this will not happen by chance rather concerted effort should be made on the part of everyone in the company to work towards this end. A safer and healthier work place is not only desirable but it also minimises cost and improves productivity.
By making the work
more...
From Randy Hauter
Adult CPR, Child CPR, Infant CPR, AED with First Aid in any combination



Instructor led class at your facility covering Adult CPR, Child CPR, Infant CPR, AED with first aid training in any needed combination to meet regulatory requirements. Teaching to meet requirements for State of Michigan day care licensing, foster care licensing, OSHA safety training requirements, State of Michigan initial teaching certificate requirements.
more...
From DFW CPR
Heartsaver Bloodborne Pathogens
this course is designed specifically for the workplace health and safety market who must be trained annually in bloodborne pathogens. Course length is 1-1 1/ 2 hours and covers general OSHA standards, how to protect, react, clean up and report exposures.
more...
Heartsaver First Aid
this course is intended for most of the general public that has a strong desire to learn basic life saving measures. Course length is 2 hours and covers general principals, medical and injury emergencies. This course is not designed to meet OSHA regulations.
more...
From blsinstructors and company
Basic Life Support Training Instructors & Company
...dborne Pathogen Standard(29/CFR 1910.1030) promulgated by OSHA.
First Responder:
Entry level EMS provider trained to current State of Louisiana standards.
First Responder Refresher Courses
Emergency Medical Technician Basic Refresher Courses
Emergency Medical Technician Retraining:
Preparing the EMT student for testing of the State of Louisiana standards.
CPR Instructor Course:
more...
From Leihoku Group, LLC
Forklift Certification
On site classroom training, testing, performance evaluation, and certification.
more...
From CPR First Aid Training of Ohio
American Heart Association Heartsaver First Aid
For those who have a duty to respond to a first aid or cardiac emergency because of job responsibilities or regulatory requirements.
The Heartsaver First Aid Course teaches how to manage illness and injuries in the first few minutes until professional help arrives. Course content includes General Principles, Medical Emergencies, and Injury Emergencies. Optional topics include CPR and AED, and
more...
American Heart Association Heartsaver CPRAED
The Heartsaver AED Course teaches CPR, AED use, relief of choking in adults and children, and infant CPR and relief of choking, and use of barrier devices for all ages.
For those who have a duty to respond to a cardiac emergency because of job responsibilities or regulatory requirements.
more...
From American Safety Training, Inc.
2-day comprehensive Cal/OSHA safety training course
...OSHA safety training at numerous locations across the state each month. Earn your 10-hour OSHA card, and keep your company in compliance with the Cal/OSHA Safety Orders.
Our courses are held in a classroom setting, and slides are presented by the instructor as he discusses each subject. The course guidebook makes it easy to follow along and has plenty of room for taking notes. All of the
more...
4-day comprehensive OSHA safety training course
...OSHA safety training at numerous locations across the US each month. Earn your 30-hour OSHA card, and keep your company in compliance with federal OSHA regulations.
Our courses are held in a classroom setting, and slides are presented by the instructor as he discusses each subject. The course guidebook makes it easy to follow along and has plenty of room for taking notes. All of the slide
more...
4-day comprehensive Cal/OSHA safety training course
...OSHA safety training at numerous locations across the state each month. Earn your 30-hour OSHA card, and keep your company in compliance with the Cal/OSHA Safety Orders.
Our courses are held in a classroom setting, and slides are presented by the instructor as he discusses each subject. The course guidebook makes it easy to follow along and has plenty of room for taking notes. All of the
more...
2-day comprehensive OSHA safety training course
...OSHA safety training at numerous locations across the US each month. Earn your 10-hour OSHA card, and keep your company in compliance with federal OSHA regulations.
Our courses are held in a classroom setting, and slides are presented by the instructor as he discusses each subject. The course guidebook makes it easy to follow along and has plenty of room for taking notes. All of the slide
more...
From Alliance Training and Consulting, Inc.
CAL - OSHA: A Compliance Update
Course for personnel in California who design, implement, enforce or follow a CAL-OSHA compliant program. Learn how to comply with mandated regulations and be prepared for your next inspection.
more...
