Instructor Led Repair Training
Repair Training Provider? - Tell us about your Training!
Please select the location nearest to you:
United States
United Kingdom
Singapore
India
South Africa
Canada
Kuwait
Malaysia
Thailand
China
United Arab Emirates
Phillipines
From STM
IPC 7711 - IPC 7721
REWORK AND REPAIR IPC Certification. -- This program teaches industry approved techniques on through hole and surface mount rework, land, conductor, and laminate repair. Skills oriented training program covering a variety of procedures from the IPC-7711 "Rework of Electronic Assemblies" and the IPC-7721 "Repair and Modification of Printed Boards and Electronic Assemblies".
TRAINING DONE AT
more...
IPC 7711 - IPC 7721
From HAZMAT Plans & Programs, Inc
Scaffolding Safety




The Scaffolding Safety training course covers the following subject areas, in accordance with OSHA Construction Standards found under 29 CFR 1926. 450 Subpart L :
- General Requirements, Scope, Application and Definitions
- Capacity and Platform Construction
- Competent Person for Scaffolding and Responsibilities
- Scaffold Inspection Requirements
- Ariel Lifts
- Training Requirements
more...
Scaffolding Safety
From Human Resource & Organisational Development Consultancy (HRODC) Postgraduate Training Institute
UK Consumer Protection Law


...
- Retailer Liability;
- Manufacturer Liability;
- Repair of Refund: Interpreting The Law
- Manufacturersa Warranty
- Fit For Purpose: Retail Implications
- When is a Sane Not a a Salea ?
- Money as a Legal Tender: Consumer Rights in Paying For Goods
and Services
1.) Unfair Contract Terms
- Dealing with unfair terms in Home Improvement Contracts
-
more...
UK Consumer Protection Law
From PetroEDGE
PRIMARY REMEDIAL CEMENTING TECHNOLOGY 17 21 October 2011 Kuala Lumpur Your Expert Trainer Denis Gaudet P Eng



... ineffective jobs are sometimes difficult to identify and repair. The result of imperfectly conceived and executed jobs can be very costly. This course provides a comprehensive treatment of all aspects of planning, executing and evaluating primary cementing operations so that expensive repair jobs and lost production are minimized.
The subject of remedial or squeeze cementing operations to
more...
PRIMARY REMEDIAL CEMENTING TECHNOLOGY 17 21 October 2011 Kuala Lumpur Your Expert Trainer Denis Gaudet P Eng
Introduction to Subsea Inspection Maintenance Repair 8th -10th December 2010


...ive an introduction to subsea Inspection, Maintenance and Repair (IMR) as it is practiced in the offshore oil and gas industry. It will include IMR fundamentals, planning and implementation. The course attendees will learn the importance of
* Subsea structural, pipeline and export system purpose and general layouts.
* Subsea threats, including mechanical, marine and Corrosion.
* Corrosion
more...
From The Career Center
Comptia A
...skills and information you will need to install, upgrade, repair, configure, troubleshoot, optimize, and perform preventative maintenance of basic personal computer hardware and operating systems. The target student is anyone with basic computer user skills who is interested in obtaining a job as an IT professional or PC technician. Possible job environments include mobile or corporate
more...
Comptia A
Comptia Network
The CompTIA Network Certification course builds on your existing user-level knowledge and experience with personal computer operating systems and networks to present fundamental skills and concepts that you will use on the job in any type of networking career. If you are pursuing a CompTIA technical certification path, the CompTIA A certification is an excellent first step to take before
more...
From iWare Logic
Oracle R12 CRM Training
R12 Oracle Common Application Components Fundamentals Ed 1 - 3 Days
R12 Oracle Marketing Fundamentals Ed 1 - 4 Days
R12 Oracle Sales Fundamentals Ed 1 - 4 Days
R12 Oracle Service Fundamentals Ed 1 - 4 Days
R12 Oracle Depot Repair Fundamentals Ed 1. 1 - 2 Days
R12 Oracle Field Service Fundamentals Ed 1 - 3 Days
R12 Oracle Service Contracts Fundamentals Ed 1 - 3 Days
more...
Oracle R12 CRM Training
R12 Oracle Common Application Components Fundamentals Ed 1 - 3 Days
R12 Oracle Marketing Fundamentals Ed 1 - 4 Days
R12 Oracle Sales Fundamentals Ed 1 - 4 Days
R12 Oracle Service Fundamentals Ed 1 - 4 Days
R12 Oracle Depot Repair Fundamentals Ed 1. 1 - 2 Days
R12 Oracle Field Service Fundamentals Ed 1 - 3 Days
R12 Oracle Service Contracts Fundamentals Ed 1 - 3 Days
more...
From Lorman Education Services
Building Assessments
... the information you need to conduct audits and determine repair needs early. Our expert faculty will walk you through common issues and the different testing techniques to help you determine what repairs may be needed. Register today and learn how to properly evaluate buildings to help make long term maintenance and repair plans, and avoid unexpected costs.
Benefits for You
- Learn how to
more...
Building Assessments
... the information you need to conduct audits and determine repair needs early. Our expert faculty will walk you through common issues and the different testing techniques to help you determine what repairs may be needed. Register today and learn how to properly evaluate buildings to help make long term maintenance and repair plans, and avoid unexpected costs.
Benefits for You
- Learn how to
more...
Concrete From A to Z
Stop concrete nightmares in their tracks - get on the right track from the start.
Interested in learning more or in refreshing your knowledge about the nuts and bolts of concrete? Besides being the most popular and versatile building construction material, concrete can also be the most complicated to work with. As such, anyone involved in the construction process should have a working knowledge
more...
From Lumenbrite Training
Photoshop Essential Skills I



Learn the industry standard tool for creating rich imagery for a variety of applications including video, print and the web in this comprehensive two-day Photoshop CS4/ CS5 training. You will begin by learning the interface and how to properly setup a workflow for image editing. Your instructor will teach you how to retouch, repair and manipulate photos with advanced tools. Create projects that
more...
From MicroTrain
CompTIA A Certification Training
Get CompTIA A+ certified.
Exam Pass Guarantee from Microtrain CEO Stan Van Nice. "We believe in our recipe for gettting you A+ certified, I guarantee you will pass your MCSE exams or I will pay for your retake of you exams." Ask a MicroTrain representative how to qualify for A+ exam pass guarantee.
For superior CompTIA A+ certification training in the heart of Chicago,
more...
From Magna Training
SAP CRM Training
... + Complaints and returns
+ In-house repair processing
o IT Service Management
CRM Technical
( Week 6 )
* CRM User Interface ( UI ) Management
o SAP CRM User Interface Overview
o UI Concept & Business Roles
o Navigation Bar Customizing and Transaction Launcher
o Architecture & UI Configuration
more...
From Certified Forensic Loan Auditors, LLC
Coming to ATLANTA GA Mortgage Securitization Auditor Training Certification Class Feb 17-19 2012





Our Mortgage Securitization Auditor Training Class is a cutting edge, highly innovative, and comprehensive (3) day instruction that is designed to help industry professionals obtain highly specialized skill sets, sought after trade secrets, and industry credentials!
more...
New- Cutting Edge Mortgage Securitization Training ~ Dec 3rd & 4th, 2011 ~ Las Vegas, NV





Certified Forensic Loan Auditors, LLC, the industry leading experts in "Mortgage Securitization" research and training has created a comprehensive 2nd Tier Mortgage Securitization training certification program entitled: "AMBASSADOR Mortgage Securitization Auditor "MSA"- A 2-day in-person intensive seminar held across the country."
more...
CFLA Presents Mortgage Securitization Auditor Training - December 16-18 2011 - San Diego CA





Our Mortgage Securitization Auditor Training Class is a cutting edge, highly innovative, and comprehensive (3) day instruction that is designed to help industry professionals obtain highly specialized skill sets, sought after trade secrets, and industry credentials!
more...
CFLA Presents Mortgage Securitization Auditor Training - January 20-22 2012 in Las Vegas NV





Our Mortgage Securitization Auditor Training Class is a cutting edge, highly innovative, and comprehensive (3) day instruction that is designed to help industry professionals obtain highly specialized skill sets, sought after trade secrets, and industry credentials!
more...
Mortgage Securitization Auditor Training - October 21-23 2011 - Las Vegas NV





Our Mortgage Securitization Auditor Training Class is a cutting edge, highly innovative, and comprehensive (3) day instruction that is designed to help industry professionals obtain highly specialized skill sets, sought after trade secrets, and industry credentials!
more...
Mortgage Securitization Auditor Training - November 18-20 2011 - Orlando, FL





Our Mortgage Securitization Auditor Training Class is a cutting edge, highly innovative, and comprehensive (3) day instruction that is designed to help industry professionals obtain highly specialized skill sets, sought after trade secrets, and industry credentials!
more...
Mortgage Securitization Auditor Training - December 16-18 2011 - San Diego CA





Our Mortgage Securitization Auditor Training Class is a cutting edge, highly innovative, and comprehensive (3) day instruction that is designed to help industry professionals obtain highly specialized skill sets, sought after trade secrets, and industry credentials!
more...
LAST CHANCE - Coming to Chicago Nationally Recognized Mortgage Securitization Auditor Training Certification MSA September 23





Our Mortgage Securitization Auditor Training Class is a cutting edge, highly innovative, and comprehensive (3) day instruction that is designed to help industry professionals obtain highly specialized skill sets, sought after trade secrets, and industry credentials!
more...
Mortgage Securitization Auditor Training- August 26-28 2011 - San Diego CA





This is a comprehensive 3-day training course to teach you the tools and methodologies to be an accredited a Mortgage Securitization Auditora (24hrs) including the securitization conveyance chain, introduction to CFLA Securitization Reports, terminology, and borrower documents, SEC Search Techniques, SPV search, document review, MERS search, GSE search, Assignments, Separation of Note/ Deed,
more...
Attorney CLE 6 Hrs Mortgage Securitization in Litigation Only $395.00




CA ATTORNEY MCLE 6 HRS
a Mortgage Securitization In Litigation.a
CLE Credited Course
6 Credits for CA licensed Attorneya s*
September 10th, 2011
From 9: 00 a. m. until 5: 00 p. m.
SPONSORED BY:
CERTIFIED FORENSIC LOAN AUDITORS, LLC
* CA Application pending credit, has been approved in other states
more...
From JCS Computer
ACT Software - Advanced Administering ACT Software Training Class - Kansas 800-475-1047






ACT! Software Advanced Training Class a Administering ACT Training Class. Kansas City, Kansas 800-475-1047 www. jcscomputer. com ACT software Support and online training also available.
Welcome to ACT! Software Advanced Administering Training classes. Training is an integral part of any successful software investment. This specialized one day course is designed to help you learn practical
more...
ACT Software - Advanced Administering ACT Software Training Class - Florida 800-475-1047





ACT! Software Advanced Training Class a Administering ACT Training Class. Holiday Florida 800/ 475-1047 www. jcscomputer. com ACT software Support and online training also available.
Welcome to ACT! Software Advanced Administering Training classes. Training is an integral part of any successful software investment. This specialized one day course is designed to help you learn practical ways
more...
ACT Software - Advanced Administering ACT Software Training Class - Michigan 248-540-4552




ACT! Software - Advanced Administering ACT! Software Training Class - Michigan
ACT! Software Advanced Training Class a Administering ACT Training Class. Southfield Michigan 248/ 540-4552 www. jcscomputer. com ACT software Support and online training also available.
Welcome to ACT! Software Advanced Administering Training classes. Training is an integral part of any successful software
more...
ACT Software - Advanced Administering ACT Software Training Class - Illinois 847-364-0835





ACT! Software - Advanced Administering ACT! Software Training Class - Illinois
ACT! Software Advanced Training Class a Administering ACT Training Class. Arlington Heights Illinois 847/ 364-0835 www. jcscomputer. com ACT software Support and online training also available.
Welcome to ACT! Software Advanced Administering Training classes. Training is an integral part of any successful
more...
ACT Software - Advanced Administering ACT Software Training Class - Missouri 314-644-4100





ACT! Software - Advanced Administering ACT! Software Training Class - Missouri
ACT! Software Advanced Training Class a Administering ACT Training Class. Brentwood, Missouri 314-644-4100 www. jcscomputer. com ACT software Support and online training also available.
Welcome to ACT! Software Advanced Administering Training classes. Training is an integral part of any successful software
more...
From kssinfotech
online Computer Hardware & networking classes



Become an expert computer hardware technician , engineer, Network administrator
By joining for online repair classes
more...
CHIPLEVEL PC MOTHERBOARD & LAPTOPS REPAIR,SERVICE COURSE


...repair course.
This course covers starts from the identification of mother boards,
Troubleshooting various problems related to MOTHERBOARD & LAPTOPS like
1. No display
2. No sound
3. Heating of cpu
4. CPU Fan problems
5 Ram related problems
6. Bay or slots problems
7. CHip set problem
8. input out put ic problems]
9. NOrth & south bridge identicattion
10. Checking of tracks on
more...
CHIPLEVEL LAPTOPSNOTEBOOKPC MOTHERBOARD REPAIR COURSE
...REPAIR COURSE
Introduction to laptops & Motherboard & its make
Sections of laptops, desktop motherboards
IC's Identification , Testing and Replacement DIP, QUAD, PGA, FPGA, FBGA
Tools used for M/ B servicing
(Blower, multimeter, soldering iron, lead sucker, desoldering wire, BGA Machine, SMD Rework Station etc)
Basic Electronics
(Resistors, Capacitor, Diodes, Inductors,
more...
LAPTOPS CHIPLEVEL MOTHERBOARD LAPTOPS REPAIR CLASSES
...repair course.
This course covers starts from the identification of mother boards,
Troubleshooting various problems related to mother baord like
1. No display
2. No sound
3. Heating of cpu
4. CPU Fan problems
5 Ram related problems
6. Bay or slots problems
7. CHip set problem
8. input out put ic problems]
9. NOrth & south bridge identicattion
10. Checking of tracks on the mother
more...
Mobile Phone Repair Classess



...repair couse starting from basics upto chip level service .We also conduct online mobile phone repair classes through video conferencing facility .
THe details of the course contents are as follows .
WE TRAIN PEOPLE ON CHIP LEVEL SERVICE & REPAIR OF MOBILE
PHONES
1. SOLDERING
2. DESOLDERING OF COMPONENTS
3. CHECK OF VOLTAGES IN A BATTERY OF A MOBILE PHONE
4. USE OF SMD REWORK
more...
LAPTOPS & MOTHERBOARD CHIPLEVEL REPAIR CLASSES








Introduction to Motherboard & its make
Tools used for M/ B servicing
(Blower, multimeter, soldering iron, lead sucker, desoldering wire etc)
Basic Electronics
(Resistors, Capacitor, Diodes, Inductors, Transistor, Mosfets, Transformers)
Types of ICa s (Dual, Quad, Bga, PGA, FPGA, FBGA)
Using of Tools practicals
Architecture of Motherboard
(slots ISA/
more...
From HBF Networks
Advanced AVVID Troubleshooting and PBX Integration


...lient interface components
Analyze, troubleshoot, and repair trouble tickets on the network
Integrate and Troubleshoot CallManager with a legacy PBX
Develop the skills needed to solve and repair the most complex problems with AVVID solutions
Intended Audience
This course is intended for engineers, consultants, and services personnel who are deploying and
more...
From Global Technical Training - South Africa
Metallurgical Failures of Ageing Boilers
The seminar offers delegates an appreciation of the need to:
a Enhance safety, reliability, and optimize economic viability
a Understanding the risk of plant failures.
a Plan for future equipment repair and / or replacement
Able to diagnose boiler tube failures.
Implement procedures to mitigate degradation.
more...
The Boiler MBA
... single tube failure, requiring an estimated four days of repair work, can result in significant loss of revenue, apart from the associated repair costs.
FACT =>To be able to effectively manage the risk associated with operation; Management needs accurate up to date information on the prevailing condition and the prognosis for boiler components.
The Boiler a MBAa offers delegates an
more...
Plant Life Management - Ageing Degradation Mechanisms
Ageing is not about how old your equipment is ita s about what you know about its condition, and how thata s changing over time.
Beginning with the fundamentals, the objective of this series of seminars is to provide practical information regarding materials degradation and the consequences for ageing plants.
a To extend maintenance period.
a To mitigate potential failures
more...
Under standing Boiler Tube Failures part 1

Boiler tube failures are the leading cause of steam plant non-reliability.
A tube failure may cause a forced outage, usually at the most inopportune time.
The outage results in lost production and lost revenue.
A reduction in the frequency of tube failures can be achieved by understanding the root cause of the failure and taking steps to eliminate the problem. How can you focus these efforts?
more...
From Hands On Technology Transfer, Inc.
CompTIA A+

...repair, configure, optimize, troubleshoot, and perform preventative maintenance on basic personal computer hardware and Windows operating systems.
Course Prerequisites: Experience with end-user skills on a Windows-based personal computers, including the ability to: browse and search for information on the Internet; start up, shut down, and log on to a computer and network; run programs; and
more...
CompTIA Network+
This course is intended for entry-level computer support professionals with basic knowledge of computer hardware, software, and operating systems, who wish to increase their knowledge and understanding of networking concepts and skills to prepare for a career in network support or administration, or to prepare for the CompTIA Network+ (2009 Objectives) exam. You will identify and describe all the
more...
From Global Innovative Campus
Practical Pump Technology Selection Applications Operation Troubleshooting and Maintenance
...zing calculations, sealing arrangements, common problems, repair techniques, as well as the preventive and predictive maintenance of these pumps are covered in detail.
This programme is a MUST for those who use this equipment. It covers how pumps operate and provides the guidelines and rules that must be followed for their successful application. This programme provides the following for
more...
Electrical Generators and Excitation Systems Selection Applications Operation Diagnostic Testing Refurbishment Troubleshooting a
... characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance. This seminar is a MUST for anyone who is involved in the selection, applications, or maintenance of generators. It provides the latest in technology. The seminar covers how this equipment operates and provides guidelines and rules that must be followed for a successful operation.
more...
Electrical Generators and Excitation Systems Selection Applications Operation Diagnostic Testing Refurbishment Troubleshooting a
... characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance. This seminar is a MUST for anyone who is involved in the selection, applications, or maintenance of generators. It provides the latest in technology. The seminar covers how this equipment operates and provides guidelines and rules that must be followed for a successful operation.
more...
Uninterruptible Power Systems UPSs Industrial Batteries Variable Frequency Drives And Motors
...ection criteria, sizing requirements, common problems and repair techniques, preventive and predictive maintenance. This seminar is a MUST for anyone who is involved in the selection, applications, sizing, or maintenance of UPSa s, industrial batteries, variable frequency drives, and motors. It provides the latest in technology. The seminar covers how these equipment operate and provide
more...
Compressors Fans and Pumps Basics Selection and Operation
Description
Compressors, Fans and Pumps are among the most frequently used mechanical machines in industrial and commercial enterprises. Achieving correct and efficient application has therefore considerable economic impact. This requires a clear grasp of the basic operating principles, machine and system performance characteristics, and selection criteria, plus knowledge of common problems and
more...
Compressors, Fans and Pumps - Basics, Selection and Operation
Description
Compressors, Fans and Pumps are among the most frequently used mechanical machines in industrial and commercial enterprises. Achieving correct and efficient application has therefore considerable economic impact. This requires a clear grasp of the basic operating principles, machine and system performance characteristics, and selection criteria, plus knowledge of common problems and
more...
Practical Compressor Technology Selection Applications Operation Troubleshooting and Maintenance
...zing calculations, sealing arrangements, common problems, repair techniques, as well as their preventive and predictive maintenance. This course is a MUST for those who use this equipment. It covers how compressors and bearings operate and provides the guidelines and rules that must be followed for their successful application. Their basic design, specification and selection criteria, sizing
more...
Electrical Equipment Transformers Inverters Rectifiers Motors Variable Frequency Drives UPS Generators Circuit Breakers Fuses
... characteristics, selection criteria, common problems and repair techniques, preventive and predictive maintenance. This seminar is a MUST for anyone who is involved in the selection, applications, or maintenance of electrical equipment. It provides the latest in technology. The seminar covers how this equipment operate and provide guidelines and rules that must be followed for a successful
more...
From Alfa Institute
Mobile Phone Repairing Course in Classes

...repairing and servicing at Alfa Institute. We provide advanced mobile repairing course at our classes in Mumbai, India starting from basics to chip-level training to repair gsm and cdma handsets. We conduct mobile phone hardware as well as software training with practicals. We have trained hundreds of students who are working successfully in service centers or have set up their own businesses/
more...
From NobleProg - IT training courses
Oracle Database 11g New Features for Administrators DBA Release 2





... * Running Health Checks Manually
* Using the SQL Repair Advisor
Module 10: SQL Monitoring
* SQL Monitoring in Oracle Database 11g Release 2
* Viewing Session Details
* Viewing the SQL Monitoring Report
Module 11: Performance Enhancements
* Using the DBMS_ADDM Package
* New and Modified Views
* Enabling Automatic Memory Management
* Using New
more...
From Global Innovative Campus
Pipelines Piping Inspection Maintenance Repair Integrity 12 CEUs
Date: 22 Nov - 23 Nov 2010
Location: Calgary, AB
Details: Quality Inn University
2359 Banff Trail N. W.
Calgary, Alberta, Canada
T2M 4L2
more...
Wear of Engineering Materials and Protection 18 CEUs
... an example, wear results in significant capital loss for repair and replacement of worn mining machinery and refining facilities in the oil sands industry. This course on wear and protection includes three parts. In part 1, main industrial wear processes are classified and relevant mechanisms are discussed. Techniques for wear testing and analysis are described. In part 2, the wear behavior of
more...
From Last Minute Training
Adobe Photoshop CS5 - 3 days
Let us show you how to use Photoshop to its fullest potential by teaching you about cropping & resizing, painting & erasing, working with layers, selections & masks & working with text. Also how to use the touch-up tools to repair & enhance your images.
more...
Pipelines Piping Inspection Maintenance Repair Integrity 12 CEUs
This practical, applications-oriented course covers pipelines & piping systems design, inspection & maintenance. Upon completion, delegates will be able to evaluate the mechanical design of pipelines & piping systems in accordance with the ASME Code...
more...
A Certification A Comprehensive Approach for All 2009 Exam Objectives
You will install, upgrade, repair, configure, optimize, troubleshoot, and perform preventative maintenance on basic personal computer hardware and operating systems.
more...
Microsoft Word 2003 Level 3
Location: Vancouver Date: 2008-03-19
List Price: $229 Offered Price: $160.00
Seats Available: 2
In this advanced course of Microsoft Word 2003 participants will learn how to:
* Inserting and Formatting a WordArt Object
* Modifying and Creating a Chart
* Selecting a Chart Type
* Inserting and Excel Worksheet into a Word Document
* Creating a New Form
* Using
more...
Microsoft Word 2003 Level 3

Location: Vancouver Date: 2008-02-29
List Price: $229 Offered Price: $160.00
Seats Available: 2
Objectives
Inserting and Formatting a WordArt Object
Modifying and Creating a Chart
Selecting a Chart Type
Inserting and Excel Worksheet into a Word Document
Creating a New Form
Using Text Fields
Customizing Word s Toolbars
Recording and Running a Macro
Using Detect and Repair
more...
Microsoft Word 2003 Level 3
Location: Vancouver Date: 2008-02-29
List Price: $229 Offered Price: $160.00
Seats Available: 2
Objectives
* Inserting and Formatting a WordArt Object
* Modifying and Creating a Chart
* Selecting a Chart Type
* Inserting and Excel Worksheet into a Word Document
* Creating a New Form
* Using Text Fields
* Customizing Word s Toolbars
* Recording and
more...
Watermain Breaks and Repairs
...ponents of a water main system, alternative approaches to repair or replacement; they will learn the reasons and need for disinfection and Health and Safety requirements such as working in a road allowance and other personal safety items. At the completion of the two day period the learners will understand the regulatory requirements that operators must follow to repair a break as well as
more...
MacSvc 300 Apple Certified Macintosh Technician Training
Apple Certified Macintosh Technician (ACMT) certification verifies the ability to perform basic troubleshooting & repair of both desktop & portable Macintosh systems, such as iMac MacBook Pro.
more...
Protecting And Repairing Concrete Structures
This course explains the mechanisms responsible for the deterioration of concrete structures, the methodology to inspect such concrete structures, as well as the materials and techniques that can be used for their protection, rehabilitation and repair.
more...
2261C Supporting Users Running the Microsoft Windows XP Operating System
This three-day instructor-led course provides students with the knowledge and skills to troubleshoot and escalate or repair problems with Windows desktop operating systems by reacting to incident requests from end users.
more...
Recovering Messaging Servers and Databases using Microsoft Exchange Server 2007 - ctc
This course provides messaging specialists with the knowledge specialists need to recover Exchange mailboxes & servers in a variety of disaster scenarios. Learn how to perform full & dial-tone recoveries of a mailbox server & repair a mailbox database.
more...
Recovering Messaging Servers and DB using MS Exchange Server 2007
This one-day course teaches messaging specialists to recover Exchange mailboxes and servers in a variety of disaster scenarios. Students will learn how to perform full and dial-tone recoveries of a mailbox server, as well as repair a mailbox database.
more...
Adobe Photoshop CS4 - 3 days
Let us show you how to use Photoshop to its fullest potential by teaching you about cropping & resizing, painting & erasing, working with layers, selections & masks & working with text. Also how to use the touch-up tools to repair & enhance your images.
more...
Adobe Photoshop CS4 - 3 days FRENCH - eliquo
Let us show you how to use Photoshop to its fullest potential by teaching you about cropping & resizing, painting & erasing, working with layers, selections & masks & working with text. Also how to use the touch-up tools to repair & enhance your images.
more...
Residential Building Envelope and Structure Assessment and Repair
This seminar will explore various building designs and construction materials and how the application of the building code structural, health and life safety, and building materials are applied in the repair of multi-unit and single family buildings.
more...
Renovation Preservation And Repair Of Bridge Infrastructure
This course is aimed at familiarizing the audience with the basic information & problems associated with the evaluation, preservation & rehabilitation of the existing bridge infrastructures, repair materials & strategies, & fiscal & management concerns.
more...
Supporting Users Running Microsoft Windows XP Desktop Operating Systems
This three-day instructor-led course provides students with the knowledge and skills to troubleshoot and escalate or repair problems with Windows desktop operating systems by reacting to incident requests from end users.
more...
5050 Recovering Messaging Servers and Databases using Microsoft Exchange Server 2007
This one-day course teaches messaging specialists to recover Exchange mailboxes and servers in a variety of disaster scenarios. Students will learn how to perform full and dial-tone recoveries of a mailbox server, as well as repair a mailbox database.
more...
An Introduction to Soundtrack Pro 2
This 2-day class guides you through using Soundtrack Pro to edit audio files, repair field recordings, perform multitrack arranging & mixing, synchronize audio & video, analyze & fix common audio problems, & perform other creative sound design techniques
more...
Preventive Maintenance of Facilities
At this seminar you learn how to select among repair, refurbish or replace alternatives for building components to extend the useful life of the facility, reducing the number of break-downs & costly repairs, & minimizing system and equipment downtime.
more...
From Future Media Concepts
STP 101 - Introduction to Soundtrack Pro 2
Soundtrack Pro 101: An Introduction to Soundtrack Pro 2 Audio Editing and Sound Design in Final Cut StudioCourse Descriptions
This two-day class guides you through using Soundtrack Pro to edit audio files, repair field recordings, perform multitrack arranging and mixing, synchronize audio and video, analyze and fix common audio problems, and perform other creative sound design techniques. This
more...
From Abar Solutions
Valves in Service



Valves usually appear to be simple in form and operation, such as those of manual On-Off Valve, Check Valve, or the Fixed Valve type such as an Orifice, Blind etc. You will discover that even these components are frequently installed improperly throughout the industry. You will learn how components such as Safety and Relief Valves can become highly complicated and dangerous.
The consequences of
more...
From NR Computer Learning Center
Business Process Mapping 1 Day Project Management
...customer service, poor product reliability, poor warranty repair - we have all experienced these and have the scars and war stories to prove it. A significant majority of problems are directly related to processes.
Eighty-five percent (85%) of an organization's quality and efficiency problems are built into its systems. There are numerous companies, small and large, that have not even
more...
From Digital Media Training
Sound101 Sound Editing in Final Cut Studio
...y training course guides you through editing audio files, repair field recordings, perform multitrack arranging and mixing, synchronize audio and video, analyze and fix common audio problems, and perform other creative sound design techniques. This training course enables delegates to learn quickly by focusing on practical, professional techniques used to add professional music and sound
more...
From Precision PCB Services, Inc.
BGA Reballing
...tnamese if needed.
Key Topics covered will be: BGA pad repair, Solder Mask Repair, BGA Reballing, BGA Inspection, Heat Temperature & Profile Development, How to identify and remove BGA pad oxidation, The best performing Re-Balling Fluxes now available on the market, How to properly prepare the BGA to reduce heat and moisture damage.
Find out for yourself which BGA Reballing Process
more...
Hands-On Assembly Rework Solder Skills Training with Vietnamese Translation
Hands-On, Assembly, Touch-Up, Rework, and Solder Skills Training.
This new series of Hands-On Skills Training will focus on those seeking new employment skills, skills for job advancement and companies requiring industry certification for their employees. In consideration of the current economic situation, these seminars will be offered at a reduced rate.
English as a second language will
more...
Ball Grid Array Component Rework Training
This course is designed for students that require the hands-on skill and knowledge to reliably remove and install many types of the most complex BGA components. Students are taught methods for safe and reliable BGA component rework using a top of the line SRT BGA Rework System.
Key Topics Include
Review of the different BGA packages - ceramic, plastic, metal and micro.
A review of the
more...
From E-Tek Computer Training
CompTIA A Certification 2009 Objectives
...Description
Course Objective: You will install, upgrade, repair, configure, optimize, troubleshoot, and perform preventative maintenance on basic personal computer hardware and operating systems.
Course Objectives
Upon successful completion of this course, students will be able to:
identify the components of standard desktop personal computers.
identify fundamental components and
more...
From Horizon Systems
CompTIA A+ Certification

COMPA - CompTIA ® A+ ® Certification: A Comprehensive Approach for All 2009 Exam Objectives
Note: Take your CompTIA ® A+ Training at Horizon Systems and get a FREE Student Knowledge Pack!
If you are getting ready for a career as an entry-level information technology (IT) professional or personal computer (PC) service technician, the courses in the CompTIA ® A+ ®
more...
From Modulus
Oracle 11g New Features Training





...n to real application testing, diagnosability and failure repair. DBA features for memory management, flashback, tables, and new Enterprise Manager tabs will then be covered. The course covers new performance and security features, backup, recovery, and data pump changes. Students will also work with several ASM and data warehousing changes. There are twenty-one hands-on lab exercises for lots
more...
Introduction to XML Training





...n to real application testing, diagnosability and failure repair. DBA features for memory management, flashback, tables, and new Enterprise Manager tabs will then be covered. The course covers new performance and security features, backup, recovery, and data pump changes. Students will also work with several ASM and data warehousing changes. There are twenty-one hands-on lab exercises for lots
more...
From Soho Editors
An Introduction to Sound Editing in Final Cut Studio


...his two-day class guides you through editing audio files, repair field, recordings, perform multitrack arranging and mixing, synchronise audio and video, analyse and fix common audio problems and perform other creative sound design techniques. This course focuses on practical, professional techniques used to add professional music and sound effects to video and multimedia projects.
Included:
more...
From Resolutions Training & Consulting
Photoshop Restoration and Retouching
This class is designed for students that want to know how to restore old photos and/ or retouch new ones! Students will begin by learning about basic concepts, such as proper tonal and color adjustment, selections, and maskinga then procede to master Photoshopa s retouching tools, like the Healing Brush, Patch Tool, and Clone Stamp. After building a solid foundation, students will learn how
more...
From Akandum Technologies
Data Recovery Specialist






Akandum Data Recovery training program provides an in-depth and hands-on exposure to data recovery.
Students will learn about computer forensics and data recovery, how to use tools to analyze trace and recover data from totally damaged and destroyed hard disks, USBs, Mobile.
Hard disk also includes RAID, Logical Volume Disks etc.
The course covers topics such as:
Computer Forensics /
more...
From American Trainco
Pumps and Pump Systems
... Franklin Ind.
Better than learning how to replace or repair a pump, wouldn't it be more efficient and a greater cost savings if you just knew how to prevent a pump from failing in the first place? That's exactly what this course is designed to do. From the pump and pump system, to the people who operate, maintain and design the pump system, this seminar will teach students how to identify
more...
From AVO Training Institute
Electronics Troubleshooting

This course starts with an intensive review of electronics. The review starts with DC and AC theory, and continues through power supplies and digital logic. The course continues with basic test equipment and then covers troubleshooting techniques, practice with theoretical problems and troubleshooting actual circuits. The course is designed for personnel with a working knowledge of electricity and
more...
Protective Relay Maintenance, Basic

This relay certification course provides in-depth instruction on basic electromagnetic induction protective relays utilizing both lecture and hands-on lab sessions. The handson training is provided to allow thorough familiarization with test equipment, test techniques and relay adjustments.
This course is designed for utility and industry technicians who have the responsibility for the
more...
From AcroTrain
CompTIA A


Last Chance to Get Certified for Life.
Our 5 day program will help prepare you to take and pass the 2 A+ exams before time runs out.
Pass both exams by Dec. 31st and be certified for life!
Our hands on training starts with getting our hands dirty and stripping apart our machines. Through the week we will reassemble and install Microsoft Windows. We will explore some usable IT skills that will
more...
From Environmental Solutions Association
EPA Certified Lead Renovator Course - Eight Hours
Do you work in homes, child-care facilities, or schools built before 1978? Even if it is not all of the time but even once, you must certify in EPA Lead Safe Practices or it will COST YOU a penalty of $37, 500 and maybe jail!
Starting April 22, 2010, any renovation, repair, or painting projects conducted in the areas described above must be performed by an EPA certified Lead Safe contractor.
more...
EPA Lead Dust Sampling Technician
...ling technician, and the relevance of the EPA Renovation, Repair, and Painting
(RRP) Rule and HUDa s Lead Safe Housing Rule (LSHR).
Part 2: Skills
Chapter 2: Visual Inspection explains how to perform a visual inspection for paint
chips, dust and debris and, in some circumstances, deteriorated paint.
Chapter 3: Lead Dust Wipe Sampling describes how to prepare for and
more...
From BEST Inc
IPC 7721 PCB Board Level Repair Training Operator CIS


...Repair training and Certification Program using the IPC-7721 document is the first formal training program from IPC specifically designed for board repair and modification at the operator level. This is IPCa s most comprehensive, hands on training program with more than half of the course content spent in lab. This is an advanced course where the students will be evaluated on both lab and
more...
From Leads Learning And Development Services
Service With A Purpose - Frontline
S. W. A. P. Frontline is the first program of the SWAP series. It is all about developing frontliners with self-confidence, pride and a sense of purpose in delivering their crucial daily responsibilities. Participants will be trained on understanding customer needs and expectations through listening and questioning skills, managing their emotions when dealing with difficult situations and various
more...
From Techtrain Thailand
COMPTIA A+ Course
Copmptia A+ Course
5 Days
Location Bangkok, Thailand
English Instructor
Instructor Led
Free Toolkit, multimeter, cable tester and others
Price doesnt include exam fess they are seperate
Very Hands On Approach
Actual Hardware onsite (Build, repair etc)
Includes accommodation, food during stay
coffee, tea, snacks
training centre close to many amenities, Shopping Mall, Ice skating,
more...
From Practicum Strategic Training Provider
Digital PR and Reputation Management
The Internet is an important communications and PR channel for engaging stakeholders of a wide range of ages, backgrounds and interests.
In the last 24 months, there has been a significant paradigm shift in online PR potential. Most of this is focused around search as well as social media such as blogs, video sharing sites such as YouTube, social networks such as Facebook, content syndication
more...
From SalvationDATA Technology LLC
SalvationDATA Data Recovery Training Course Will Be Held in April Soon
The world famous data recovery training and tools provider-SalvationDATA will release its next training soon in April. This training is mainly designed for people who want to start their data recovery business and choose the best data recovery tools to start.
This training will be held in SalvationDATA headquater, chengdu, China from April 19th to April 23rd. Basic data recovery and hard disk
more...
From Manhattan Edit Workshop
Soundtrack Pro 101

...des you through using Soundtrack Pro to edit audio files, repair field recordings, perform multi-track arranging and mixing, synchronize audio and video, analyze and fix common audio problems, and perform other creative sound design techniques. This course focuses on practical, professional techniques used to add professional music and sound effects to video and multimedia projects.
Cost: $850
more...
From Institute of Piping Engineering & Building Services
Piping Design and Engineering Training
Institute of Piping Engineering & Building Services IPEBS - PROCESS PIPING/PLANT/PIPELINES DESIGN & ENGINEERING ASME B 31 Codes with 100 practical design problems for ASME pressure Design/Hydraulic Design/Stress Analysis.
Training Course Syllabus:
Piping Fundamentals
Introduction, Pipe Dimensions, Pipe Data, Piping Materials & Selection, Codes & Standards, Fabrication & Installation, Piping
more...
From MOST (Mac OS Training)
Mac OS X Troubleshooting & Maintenance

... come away from the workshop with the knowledge of how to repair or upgrade your Mac, make smart decisions for future purchases and upgrades, and preventive maintenance steps you can take to keep your Macs running smoothly, a confidence in knowing more about OS X 10.3 & 10.4, and how to prevent data loss, restore a user's data and preferences, and more. This course is taught on OS X 10.4
more...
From Systats Consulting Sdn. Bhd.
Reliability Availability Maintainability
Basic information for analysis and reliability are presented. Metrics are presented and methods for modeling developed. Applications are given to setting PM schedules, analysis of downtime, repair versus replacement costs and prediction and demonstration of performance.
Participants will understand basic ideas and measures of reliability, availability and maintainability in addition to be able
more...
From Parts Now! LLC
HP Color LaserJet CP3525 CM3530MFP Series Printer Repair Training
HP continues its LaserJet 3000 line of color printers with the CP3525 and multifunction version CM3530mfp. These color machines are commonly found in the business world and the new design makes them more challenging to service and repair for the untrained technician. This class delves into the new design, paper path and increased number of sensors. Also included are menus, maintenance kits, common
more...
HP LaserJet P3005 P3015 and LaserJet 2400 Series Printer Repair Training
The LJ 2400 and the LJ P3005 may look very much alike from the outside, but are just enough different on the inside that a training course is a good way to learn these popular printers. The newest addition to this trio, the P3015 is not only different on the inside but has new looks as well. All three disassemble very much the same, but parts are completely different. This course will explain
more...
HP LaserJet 4200 4250 4300 4350 Series Printer Repair Training (T)
The 35 ppm 4200 is similar enough to the 45 ppm 4300 that these two printers can easily be taught as one. The engine design is totally new, improving upon the LaserJet 4100 in all areas. A primary focus will be the new technology differences between these two printers, as well as a hands on teardown and break fix information.
This is a trouble-shooting class which means printers are bugged with
more...
HP LaserJet P4014 P4015 P4515 Series Printer Repair Training (T)
...class that he/ she will be able to use in the service and repair of these new printers.
(T) Indicates this is a trouble-shooting course which requires Monochrome Prerequisite for HP Printers. This allows you to learn more before the class, and instead spend the afternoon trouble-shooting real live problems in the classroom, before you see them in the field.
This is a trouble-shooting class
more...
HP LaserJet M3035mfp M3027mfp Series Printer Repair Training
This one day course blends together the P3005, LaserJet M3027mfp and LaserJet M3035mfp which all use the same print engine. If youa re looking for training on the P3005, this is a great way to learn about MFPs too, and if you're interested in the MFPs ita s a great way to learn about the P3005 along side. Students will learn digital copy theory and functions along with printer theory
more...
HP Designjet Fundamentals
This course will provide students the knowledge they need to begin servicing and supporting HP DesignJets. This is a hands on course utilizing current and older models of DesignJets including the 750/ 755, 500/ 800 and 5000. Discussed in the classes are the 1050/ 1055c, 4000, T and Z series. Students will learn how these big inkjets function in theory and in action. Trouble-shooting, maintenance
more...
Advanced Level HP Monochrome Printer Repair Training
1- day course focusing on todaya s most commonly used monochrome printers. Students will learn printer paper path basics, drivers information, and maintenance kit resets. The course also includes hands-on labs in menus, specialty menus and maintenance kits as well as partial teardown with emphasis on common failures and hard-to reach areas. Students will also receive the Parts Now! Textbook
more...
Advanced Level HP Color Printer Repair Training
1- day course focusing on todaya s most commonly used color printers. In addition to learning paper path basics, drivers information and maintenance kit resets, this course emphasizes the use of internal diagnostics to enhance trouble- shooting and repair. The Color Theory and Process test.
more...
HP Color LaserJet 4600 4650 and 4610 Series Printer Repair Training
At 16 pages per minute in color and black & white, the 4600 is anticipated to become the next staple color printer in the business world, replacing the 4550. This inline color technology is very different in nature as compared to its predecessor. This class will discuss the new advances in color technology, the inline paper path, common break/ fix solutions and, as always, a guided teardown of the
more...
HP LaserJet 2100 2200 2300 Series Printer Repair Training
The 2300, 2200 and 2100 may look very much alike from the outside, but are very different on the inside. The 2200 and 2100 are compared by parts, features and abilities for the business environment. The 2300 has a control panel for easier interaction is also comparable. This course gives service engineers the knowledge they need to correctly and accurately repair all three.
more...
HP LaserJet 4000 4050 4100 Series Printer Repair Training (T)
The 25 ppm 4100 is coupled into the 4050/ 4000 course due to the visual similarities between the two, even though the differences between the two are many. A great amount of common failure information has been accumulated on the 4000 series of printers. This course will focus on the parts similarities, differences and features between the 4100 and its predecessors, the 4050 and 4000. (T) Indicates
more...
HP LaserJet 5000 5100 Series Printer Repair Training
These durable, large format printers are common. Optional duplexer, 500 sheet feeder and hard drive are covered in addition to standard course material.
more...
HP LaserJet 5Si 8000 8100 8150 Series Printer Repair Training
The 8150 class covers the 72X engine (8150 & 8100) and the WX engine (8000 & 5Si) in a one-day course. The 5Si and 8000 have been out for a number of years and a vast amount of knowledge regarding common failures have been accumulated. Many technicians assume incorrectly that the 8100 and 8150 printers are just like the older 8000 and 5Si. This class will clear up these differences and help any
more...
HP LaserJet 9000 9050 9040 Series Printer Repair Training
The 50 page per minute 9000 is starting to take off in the market as more technicians are starting to service them in the business place. This one day course will introduce you to the new technologies of this new print engine, which is very different from the 8150. Also covered are common break-fix information to help you quickly diagnose and repair printer problems, test modes, and full tear
more...
HP Color LaserJet 9500 Series Printer Repair Training
The CLJ 9500 is HPa s first true high end color unit. It was advertised as a producer of consistent color from unit to unit. Thus, these higher end color units which accurately reproduce print and scanned colors, are clearly more complicated and have many more tools to help the service technician. This class addresses the print versions of these units addressing theory, paper path and
more...
HP LaserJet M5025mfp M5035mfp Series Printer Repair Training
This one day course blends together the LJ M5025mfp and LJ M5035mfp which both use the same LJ 5200 print engine. If youa re looking for training on the LJ 5200, this is a great way to learn about MFPs too. These are wide format printers that print up to 11x17 sized pages. Students will learn digital copy theory and functions along with printer hardware and functionality. Included, are image
more...
HP Color LaserJet CP4025 CP4525 Series Printer Repair Training
The HP Color Laser Jet CP4025 and CP4525 color laser printers replace the CLJ 4700 series. HP radically changed the layout of this unit now making the unit half the size of the CLJ 4700. The CP 4025/ 4525 series use a horizontal double transfer system vs. the CLJ 4700 which used a vertical single transfer system. Ita s clear the CP4025 and CP4525 are much more complicated compared to its
more...
HP Color LaserJet 3000 3600 3800 CP3505 Series Printer Repair Training
This one day color course focuses on the very popular color LaserJet 3000, 3600, 3800 and CP3505 series of printers. They all use one common print engine yet run at different speeds to satisfy different customer needs, thus youa ll see these in a number of businesses. This course will look at the color imaging process, paper path, menus and specialty menus including printer diagnostics
more...
HP Color LaserJet 4700 CP4005 Series Printer Repair Training
The CLJ 4700 is the direct replacement to the CLJ 4600 series. The HP CLJ CP4005 is a close cousin to the CLJ 4700 which allows both these units to be assembled into one class. This is a one day class that will discuss all the new advances in color technology, the inline paper path, common failure symptoms and solutions, and a guided teardown of the printer. Color Theory is not included in this
more...
HP Color LaserJet 4730mfp CM4730mfp Series Pritner Repair Training
The CLJ 4730mfp / CM4730mfp is the multifunction printer version of the popular CLJ 4700. The CM4730mfp has improved firmware as well as a new touch control panel. This is an in depth one day class that touches on image formation and digital copy theory. Also complete printer paper path as well as the document paper path will be discussed. A teardown of this complicated printer with emphasis on
more...
HP Color LaserJet CP6015 CM6030mfp CM6040mfp Series Printer Repair Training
The CP6015 CM6030mfp and CM6040mfp are the replacements for the CLJ 9500 and CLJ 9500mfp. These higher end color units which accurately reproduce print and scanned colors, are clearly more complicated compared to the color LaserJet 4000 series and have many more tools. This class addresses the print and MFP versions of these units addressing theory, paper path and scanner path components,
more...
HP LaserJet 9000mfp M9040mfp M9050mfp Series Printer Repair Training
The 50 page per minute LJ 9000 and it successors the LJ 9050 and LJ 9040 are a well established series of printers in the market. Now learn about the other half of the family the LJ 9000mfp all the way up to the newest M9050mfp. This one day course will introduce you to the multifunction side of this family along with the print engine side. Included, are image formation theory for both the printer
more...
Advanced Level II HP Printer Repair Training
...ho have taken the Advanced Level Monochrome and/ or Color Repair Courses for Copier Techs, and now that youa ve got contracts under your belt, are now seeing more machines than what was covered in the initial class, Advanced Level II is for you. Pick and choose the models your business is seeing, which can vary greatly from city to city and get your service techs trained on the units they
more...
HP LaserJet 4345mfp and M4345mfp Series Printer Repair Training
This one day course grew out of an MFP fundamentals course that taught principal functions of MFP units and how they work. The HP LaserJet 4345mfp unit is well established in the market place taking close to 20% of the segment 4 market place. In this course, students will learn the copy, scan, fax and print functions of the units with a live demonstration of scan to email. Also included is
more...
Lexmark T52x T62x T63x T64x T65x Series Printer Repair Training
The Lexmark T52x (4520), T62x (4069), T63x (4060) T64x (4061) and T65x (4062) are the focus of this increasingly popular course. Discussions will include Lexmark terminology as well as the similarities and sometimes vast differences of this broad line of printers. Also discusses in brief are the older Optra S and Optra T (T610/ 612/ 614/ 616) series. Lexmark image formation with troubleshooting,
more...
From FitchTraining
Warning Signals Lessons Learned in Corporate Credit


A two-day workshop providing a systematic approach to identifying credit deterioration and determining a companya s ability to improve performance or repair capital structure.
more...
From Laser Recharge of Texas
Laser Printer Repair Training


...Repair Training on the latest HP laser printers in the market.
These are classes for the beginning technician as well. We cover: Different printer manufacturers, laser technology, component differences, high mortality parts, and industry terminology, troubleshooting, use of manuals and reference guides, and much more. Contact us for more information. Laser Recharge of Texas
more...
From Unirac Software Technologies
Oracle Database 10g Database Administrator Oracle Certified Professional-1Z0-043




...BVERIFY
[ ] Detect database corruptions using the dbms_repair package
[ ] Implement the DB_BLOCK_CHECKING parameter to detect corruptions
[ ] Repair corruptions using RMAN
Automatic Database Management
[ ] Use the Database Advisors to gather information about your database
[ ] Use the SQL Tuning Advisor to improve database performance
[ ] Use automatic undo retention tuning
more...
From Laser Recharge of Texas
Train the Trainer Program - Laser Printer Repair


Train the Trainer Workshop
Train the Trainer Programs teach Trainers the essential skills to transfer knowledge to adult learners in a way that is educational, interesting and interactive. Our customized, on-site "Train-the-Trainer" workshop is for the managers, supervisors, new training professional and non-professional trainers who are called upon to develop and conduct training sessions on a
more...
From The Bridge Media Training Limited
Sound Editing in Final Cut Studio - Introduction
...here media. Let us guide you through editing audio files, repair field recordings, perform multi-track arranging and mixing, synchronize audio and video, analyse and fix common audio problems, and perform other creative sound design techniques.
This course focuses on practical, professional techniques used to add professional music and sound effects to video and multimedia projects. If you
more...
Making the Grade - Color for Editors
This one-day specialist Color grading course gives established editors, with a limited knowledge of online and finishing techniques, the opportunity to learn key techniques to improve the look and output quality of their programs and VTs ready for transmission.
In a quick turnaround environment, editors are under increased pressure to understand grading, graphic design and sound. This
more...
From Projacs International
Advanced Materials for Construction and Repair of Concrete Structures
Advanced Materials for Construction and Repair of Concrete Structures
Dubai 28 Nov a 2 Dec
more...
From DP Tech Group
PC Technician Course A Certification



...n Chicago providing PC Technician training course in a PC Repair Center, where you will gain maximum hands on real world experience for the type of training you will receive.
We are unique because our training programs are not cookie-cutter programs offered by most other training schools.
Many training school offer the A+ certification and most of them use the same books, similar
more...
From Electric Education Center
Residential Electric 201

This four-hour class continues reviewing the changes mandated by the 2008 NEC that werena t covered in the Residential I class. This class focuses on installations and knowledge of electrical appliances and other basics needed to install and repair appliances.
This class dates for 2012 so far will be:
March 22, 2012
Registration/ lunch will begin at 7: 30 am and the class will start
more...
From Predicon
API 570 Piping Inspection Code Inspection Repair Alteration and Rerating of In-service Piping Systems
...iping and pipeline inspection, integrity, maintenance and repair.
This practical, applications-oriented course covers pipelines and piping systems design, inspection and maintenance to prepare inspectors for the API 570 ICP Assessment examination. Upon completion of this course, delegates will be able to evaluate the mechanical design of pipelines and piping systems in accordance with ASME
more...
From IPCC-International Petroleum Center
Practical Pump Technology Selection Applications Operation Troubleshooting and Maintenance
This programme provides a comprehensive understanding of the various types of reciprocating, rotary, and centrifugal pumps. This includes piston pumps, plunger pumps, rotary pumps, screw pumps, two- and three-lobe pumps, cam pumps, vane pumps, bellows-type metering pumps, diaphragm pumps, canned motor pumps, and centrifugal pumps. The characteristics, selection criteria, sizing calculations,
more...
From Moviola Digital Education Center
Apple Soundtrack Pro

...his two-day class guides you through editing audio files, repair field recordings, perform multitrack arranging and mixing, synchronize audio and video, analyze and fix common audio problems, and perform other creative sound design techniques. This course focuses on practical, professional techniques used to add professional music and sound effects to video and multimedia projects.
Topics
more...
From The Academy of South Florida, Inc
A Computer Technician Program


The objective of the A+ Computer Technician Program is to train and prepare individuals to become entry-level computer service technicians; able to build, upgrade and repair Personal Computers (PCa s). After completion of the program, students are trained to become certified technicians who possess the knowledge and skills essential for a successful entry-level position as a computer service
more...
From SAP APO Corporate and Online Training
SAP Supply Network Planning


...egies
o Heuristics
SNP Heuristics: repair-based planning
Quota arrangements
Production capacity check
Capacity leveling
o Optimisation
Selection of best production site
Optimization of production, transportation, and inventory costs
more...
From Teleman Institute of Mobile Technology
Teleman Mobile Technology


The Teleman course design presupposes little or no knowledge of electronics. Students will receive complete training in basic electronics and will then go on to learn mobile phone technology, repairs and maintenance.
The course is suitable for SSC upwards, and practicing electrical / electronics repair technicians.
more...
From Advanced Engineering and Innovation Centre
POROUS CERAMICS FOR BIOMEDICAL APPLICATIONS
... meets the requirement of any materials designed for bone repair and augmentation. To this aim, a high degree of crystallinity and chemical stability have been included among the desirable properties of an ideal HA. Although many problems concerning infective risk, mechanical and biological stability, compatibility, storage and costs still remain, HA materials have been applied in orthopedics
more...
From Cellular Plaza Repair Training Center
cellphone repair school
...repair every week all year long Monday to Friday 10 am to 5 pm. in this class you will be learning level I, II and III plus how to unlock phones. at the end of the class you will be able to repair the following cellphone problems: water damage, lcd, digitizer, charging port, no power, no ringer, keypad malfunction, soldering, trackball, trackpad, headjack, switches, mic, sim card tray, memory
more...
From Technology Career Services
Network Support Technician
This course provides students with the skills to install, configure, repair, and maintain computer information systems. Students will be prepared to take CompTia A+ PC Technician exams, Network+ exam and Cisco CCNA exam. Classes are taught by licensed and certified instructors with industry experienced to provide hands-on labs and real world applications.
more...
From Automotive Process Solutions, Inc.
Automotive Fixed Operations Training
...estions and practice lessons learned during the workshop. Repair Shop Owners, Managers, and Service Writers will leave this workshop with the knowledge, skills, tools, and confidence to make an immediate impact to their business!
Workshop training goals:
Maximize shop capacity
Maximize shop productivity and technician efficiency
Ensure quality repairs
Implement proper
more...
From Heats School of Welding Technology Inc
Shielded Metal Arc Welding SMAW NCII
...ding Carbon Steel Plates and Pipes using SMAW Process and Repairing welds.
COURSE OUTCOMES: At the end of this course, the student will be able to: 1.) Weld carbon steel plates and pipes components using SMAW process, 2.) Read Blue Print, 3.) Fit up weld joints, 4.) Prepare weld materials, 5.) Set-up welding machines and 6.) Do repair of welds.
ENTRY REQUIREMENTS: Students wishing to gain
more...
From The Per Scholas Institute for Technology
A Certified Computer Repair Technician Preparation Course
Through the generosity of private foundations, The Per Scholas Institute for Technology is able to offer this intensive technology training without a fee attached. All tuition, books, and materials are provided free of charge!
This is essentially the same exact technical instruction you would receive at TCI, Katherine Gibbs, or DeVry. However, with us, you save yourself over $10, 000 dollars in
more...
From RM Skills Centre Ltd
ROADWORKS REPAIR REINSTATEMENT
To instruct operatives of the correct method of handling and laying of bituminous materials to carryout permanent reinstatement in roads or footpaths.
This course is suitable for operatives with some experience of road works or supervisors who wish to acquire further knowledge of handling and laying of bituminous materials.
more...
From Corporate Education Group
Troubleshooting and Optimizing Database Servers Using Microsoft SQL Server 2005
...eshooting SQL Server Data Issues
Troubleshooting and Repairing Torn Pages Troubleshooting a Data Issue
After completing this unit, students will be able to:
Explain the methodology of troubleshooting data issues. Explain the process of troubleshooting data integrity issues. Explain how torn pages can be resolved using a single-page restore.
more...
From Heats School of Welding Technology Inc
SMAW NC I
...rials, Welding Carbon Steel Plates using SMAW Process and Repairing welds.
COURSE OUTCOMES: At the end of this course, the student will be able to: 1.) Weld carbon steel plates components using SMAW process, 2.) Read Blue Print, 3.) Fit up weld joints, 4.) Prepare weld materials, 5.) Set-up welding machines and 6.) Do repair of welds.
ENTRY REQUIREMENTS: Students wishing to gain entry
more...
From Silver Trowel Ltd
Plastering Training Courses
Short 5 and 10 day plastering courses. You will be taught in small
group sizes of 4 people. You will learn how to cut and fix plasterboard to walls and ceilings. You will 2 coat skim walls and ceilings. Plumb and fix angle beads. Use base coat plaster. Patch repair to plasterboard wall. Sand and cement render.
more...
From Dirk Moore & Associates
An Introduction to the Travelers - Crimes Against the Elderly
This course is designed to give the law enforcement student an in-depth look at transient criminals known as Travelers and their effect on the elderly population. This course will provide the student with the basic knowledge to identify, investigate and prosecute Traveler related crimes.
The course will cover the following scams attributed to criminal Traveler activity:
Asphalt Paving -
more...
From Cool Voice Radio
Making Money in Voiceovers
... TO YOUR INDIVIDUAL VOICE
PACKAGE C
DEMO ASSESSMENT & REPAIR
"FINALLY GET IT RIGHT WORKSHOP"
HAVE A DEMO THAT CAUSES MORE PROBLEMS THAN VOICEOVER WORK? BRING IT TO US AND WE'LL FIX IT FOR YOU!
PACKAGE D
1 HOUR CRASH COURSE
CURIOUS ABOUT VOICEOVERS AND ON A TIGHT BUDGET? GET THE BASICS DURING THIS ONE HOUR ONE-ON-ONE SESSION DESIGNED TO SEE IF YOU CAN GET VOICEOVER WORK NOW.
more...
From LeoSoft Consultants
Telecommunications in Transitiontraditonal to VOIP
...ng the Support Systems
1. Help desk
2. Installation and repair technicians
3. Planning and provisioning
4. Procurement
F. Avoiding Switched Access Charges and Regulatory Fees
G. Avoiding Proprietary Hardware and Software
H. The End of Geography
Part 3: Nuts and Bolts
With a good understanding of "what", "how" and "why", the next two chapters drill into VoIP technology, enough to
more...
From Training Connection
Excel Training - Chicago
... Updates From Microsoft Office Online
How To Detect And Repair Errors In Excel
How To Recover Excel When It Is Not Responding
How To Set The AutoRecover Options
How To Recover An Excel File
Moving Around Your Cursor
How To Activate A Cell Using The Mouse
How To Move To A Cell Using Keyboard
How To Move Using Go To Command
How To Move using Name Box
How To Move Within
more...
PowerPoint Training Chicago
...Updates From Microsoft Office Online
How To Detect And Repair Errors In PowerPoint
How To Recover PowerPoint When It Is Not Responding
How To Set The AutoRecover Options
How To Recover An PowerPoint File
Unit 4: Viewing a Presentation
How To Switch To Normal View
How To Display Outline View and Slide Miniature
How To Switch To Slide Sorter View
How To Switch To
more...
From Corporate Education Group
Linux System Administration
... using RPM queries Install zsh using RPM Troubleshoot and repair a package using RPM verification Upgrade the kernel using RPM Install the XFCE desktop environment using YUM Create and test a custom YUM repository Crate a custom YUM repository for installing software Setup CUPS print queues using: system-config-printer, lpadmin, and the CUPS web interface Modify a kickstart file using a text
more...
From GB Education
Oracle 11i Apps CRM


1. Functionalities of Field Service Planner, Manager, Dispatcher,
Representative.
2. CRM Foundation
Resource Management, Territory Management, Inventory management with respect to spares, Task management, Customer Management (TCA), Calendar, Escalation Management
3. Handling Service Request
Dispatch Center, Assignment Manager, AutoScheduling, Debrief Report, Charges Interface, Closure
4. Spares
more...
From Corporate Education Group
Access 2003 Level III
Your training in and use of Microsoft Office Access 2003 has provided you with a solid foundation in the basic and intermediate skills for working in Microsoft Office Access 2003. You're now ready to extend your knowledge into some of the more specialized and advanced capabilities. Course Objective: You will create complex Access databases using forms, reports, and macros.
Who should attend:
more...
From Synergy Solutions International
E-Mail Etiquette






...ur in almost any type of communication. It is possible to repair glitches in a face-to-face dialog or even a telephone conversation before any lasting damage occurs. Electronic mail does not offer the benefit of visual and verbal signals for e-mail users. Email etiquette refers to a set of dos and don ts that are recommended by business and communication experts in response to the growing
more...
From Corporate Education Group
Oracle Database 10g Administration Workshop II
... The ANALYZE command How to Handle Corruptions The DBMS_REPAIR Package Block Media Recovery (BMR) Detecting Database Corruptions Using DBVERIFY Using RMAN to Repair Corrupt Blocks
Automatic Database Management
Automatic Optimizer Statistics Collection Workload Repository Database Control and Advisors Using the SQL Tuning Advisor Using the SQL Access Advisor Automatic Undo
more...
Supporting Users Running Applications on a Microsoft Windows XP Operating System
... After completing this lab, students will be able to:
Repair a damaged Office installation. Enable document recovery. Use Shadow Copy to recover previous versions of documents.
After completing this module, students will be able to support Microsoft Office.
Specifically, students will be able to:
Configure and troubleshoot an Office installation. Configure Office
more...
Configuration and Troubleshooting Project
The Configuration and Troubleshooting Project provides students with the opportunity to incorporate the multiple hardware and software skills learned during the program. Students are given a set of system specifications to be designed and implemented. Bugs are introduced into the systems and students analyze, diagnose and repair the systems in a simulated customer environment, using best practices
more...
From Applied Computer Training & Technology
A+ Technician Program



The A+ program furnishes a national industry level certification (COMPTIA) and provides students with the background, fundamental knowledge and a level of experience to enter the computer field. Each student will be able to build, configure, optimize and troubleshoot a standalone computer, as well as, gain in-depth knowledge of DOS, Windows 9x/NT/ & 2000 operating systems.
Students will be
more...
CompTIA Linux+



The Linux class was developed to meet current demands of DOD (Department of Defense) and the growing needs of the computer industry. This class provides the student with the level of knowledge needed as part of the DOD and industry requirements for employment as an entry-level computer technician. Students gain a solid background on how to install, configure and use the Linux operating system.
more...
CISSP Prep



The CISSP Prep class was developed to meet current demands of DOD (Department of Defense) and the growing needs of the computer industry. This class provides the student with the level of knowledge needed as part of the (ISC)2 certification requirements for the Certified Information System Security Professional (CISSP) Certification. This certification is rapidly becoming a requirement for
more...
Level 1 Technician Package



The Level 1 Technician s class is a complete training package that was developed to meet current demands of DOD (Department of Defense) and the growing needs of the computer industry. Provides the student with the requirements needed for employment with the DOD and computer industry as an entry-level computer technician. The Level 1 Technician package includes: A+ certification, Network+
more...
MCP 2000 Professional



The MCP (Microsoft Certified Professional) program prepares the student for a national industry level certification (Microsoft). It provides students with the background and advanced knowledge and level of experience to become competitive for work in the computer field. Each student will be able to install, configure, and optimize a Windows 2000 based network. Students gain additional hands-on
more...
MCP 2000 Server



The MCP (Microsoft Certified Professional) program prepares the student for a national industry level certification (Microsoft). It provides students with the background and advanced knowledge and level of experience to become competitive for work in the computer field. Each student will be able to install, configure, and optimize a Windows 2000 based network. Students gain additional hands-on
more...
MCP 2000 Infrastructure



The MCP (Microsoft Certified Professional) program prepares the student for a national industry level certification (Microsoft). It provides students with the background and advanced knowledge and level of experience to become competitive for work in the computer field. Each student will be able to install, configure, and optimize a Windows 2000 based network. Students gain additional hands-on
more...
MCP 2000 Managing a Windows 2000 Network



The MCP (Microsoft Certified Professional) program prepares the student for a national industry level certification (Microsoft). It provides students with the background and advanced knowledge and level of experience to become competitive for work in the IT field. Each student will be able to install, configure, and optimize a Windows 2000 based network. Students gain additional hands-on
more...
MCP Windows XP Professional



The MCP (Microsoft Certified Professional) program prepares the student for a national industry level certification (Microsoft). It provides students with the background and advanced knowledge and level of experience to become competitive for work in the IT field. Each student will be able to install, configure, and optimize a Windows XP based operating system. Windows XP is the prevalent
more...
Firewalls



The Firewall class was developed to meet current demands of DOD (Department of Defense) and the growing needs of the computer industry. It provides the student with the level of knowledge needed as part of the DOD and industry requirements for employment as an entry-level security technician. Students gain a solid background on how to secure networks from unauthorized activity. Students learn
more...
Incident Handling & Response



The Incident Handling and Response class was developed to meet current demands of DOD (Department of Defense) and the growing needs of the computer industry. It provides the student with the level of knowledge needed as part of the DOD and industry requirements for employment as an entry-level information security technician. Students gain incident handling goals and principles. This class
more...
Intrusion Detection



This course was developed to meet current demands of DOD (Department of Defense) and the growing needs of the computer industry. It provides the student with the level of knowledge needed as part of the DOD and industry requirements for employment as an entry-level security intrusion analyst. This course is designed to give students practical, working knowledge in intrusion detection and traffic
more...
Vulnerability Assessment



The Vulnerability Assessment class was developed to meet current demands of DOD (Department of Defense) and the growing needs of the computer industry. It provides the student with the level of knowledge needed as part of the DOD and industry requirements for employment as an entry-level information security technician. Students gain a solid background on how to identify current network security
more...
