|
Training Classes
| Learning and Development Resources
| Training Directory
| New Training Seminars
| New Training Providers
| Site Map
| Promote Training Seminars
|
Training Keywords
| Training Seminars
| Training Providers
| Regions
|
| Advertise Training Seminars
| Login
|
||||||||||||||||||||||||
Switched Training Seminars and Classes
From Serebra Learning Corporation
Cisco Interconnecting Network Devices Part 2: Configuring Switches
   This course is the second in a four-part series that is based on Cisco Systems' instructor-led training, Interconnecting Cisco Network Devices (ICND 1.0). In this series, the concepts, commands, and practice required to configure Cisco switches and routers in multiprotocol internetworks are covered. Installation, configuration, and troubleshooting information and practice that technical support more...Cisco Building Multilayer Switched Networks Part 1: Campus Networks
In this course, you will learn about campus networks, the emerging campus model and the hierarchical model, connecting switch blocks, and configuring switch block connectivity. more...Cisco Building Multilayer Switched Networks Part 2: VLANs
This part of the course deals with VLANs, Transparent Bridging, and the Spanning Tree Protocol in a VLAN Environment. While the first portions of this part of the course may be a refresher for the most advanced students, it is expected that the latter portion of this course will be new to all those in it. In particular the Spanning Tree Protocol in a VLAN environment and scalability issues will more...Cisco Building Multilayer Switched Networks Part 3: Multilayer Switching
The course covers the routing of traffic between VLANs. It presents interVLAN routing issues including distribution layer topology and the configuration of interVLAN routing. Also presented is a practical definition of multilayer switching includes the hardware and software requirements, its components, and how it works. more...Cisco Building Multilayer Switched Networks Part 4: HSRP and Multicast
The BCMSN curriculum is intended to teach network administrators how to build campus networks using multilayer switching technologies over high speed Ethernet. This course is the fourth of a curriculum of 5 BCMSN courses. This course will cover Hot Standby Routing Protocol (HSRP) and Multicasting. more...Cisco Building Multilayer Switched Networks Part 5: Controlling Access
In this course, students learn how to configure network devices to participate in multicast groups. The configuration instructions include enhancing the Route Processor and enabling CGMP. This part of the instruction concludes with students learning about methods used to implement access layer, distribution layer, and core layer control policies in the campus network. more...Cisco Internetwork Troubleshooting - Part 2
This is the second course in a five-part series on Cisco Internetwork Troubleshooting 4.0 (CIT 4.0). CIT 4.0 teaches students how to baseline and troubleshoot an environment using Cisco routers and switches for multiprotocol client hosts and servers. This is an advanced series that shows networking professionals troubleshooting processes on Cisco Routers and Catalyst Switches. This course will more...CCNT Basic Telecommunications Part 1: Fundamentals, Analog, and Digital
This is the first course in a two part series that presents the learner with the fundamentals of telecommunications and gives a comprehensive introduction to analog and digital concepts. The course covers the history of telecommunications and looks at the structure of business systems (including station sets, PBX, key and hybrid systems, ISDN and broadband), Consumer Premises Equipment (CPE), and more...CCNT Basic Data Communications Part 1: Introduction to Data Communications
This is the first course in a three-part series on Basic Data Communications for the Certified in Convergent Network Technologies (CCNT) curriculum. This course will introduce learners to data networks, signals and to data transmission. more...CCNT Local Area Networks Part 3: Enterprise Networks
This is the last course in a three part series that teaches Network Management and the tools and protocols associated with that. It also covers advanced network technologies to include circuit switched services and packet switched services. more...Telecommunications Industry Overview Version 1
Connecting the world, the telecommunications industry stands as one of the most essential elements of the business world. It is also one of the most volatile. Plagued by regulatory discord and economic uncertainty, telecom carriers have struggled to maintain sound footing and a competitive edge, all the while endeavoring to provide crucial, uninterrupted service to their customers. In an age of more...Network Protocols
This WestNet e-Learning module covers important information about services, layering, and protocols that will help you better understand key points. Additionally, you will learn how a protocol trace is taken and how to interpret the trace data. more...Higher-Layer WAN Protocols
...his WestNet e-Learning module reviews connection-oriented switched services commonly used to move information across a wide area. These services include Integrated Services Digital Network (ISDN), frame relay, and X.25. Although we refer to this unit as Higher-Layer WAN Protocols, these protocols are essentially Data Link Layer protocols. However,these protocols go beyond simple link more...WAN Components
Upon completion of this WestNet e-Learning module, you will understand the basic concepts and components used to move information from source to destination across a telecommunications network. more...WAN Data Link Layer Protocols
This WestNet e-Learning module covers the protocols used to move information across point-to-point networks. These protocols are associated with the Data Link Layer of the Open Systems Interconnection (OSI) model. more...How Computer Protocols Work
This WestNet e-Learning module introduces you to the basic terms and concepts that underlie all computer communication protocols. You will learn how protocols work, and how different protocols work together to move data across a network. This knowledge will become the foundation of your understanding of how computer networks function. more...How Wide Area Networks Work
This WestNet e-Learning module discusses the technologies used to connect two or more local area networks (LANs) over an extended distance, resulting in either a metropolitan area network (MAN) or wide area network (WAN). The difference between a MAN and a WAN will also be explored. more...How Ethernet Works
In this WestNet e-Learning module, we will explore Ethernet Frame Format, Fast Ethernet, Gigabit Ethernet, Switched Ethernet Configurations, and VLANs. more...Layer 2 Devices
This WestNet e-Learning module presents detailed explanations of the way bridges and switches work. It discusses the differences between Ethernet and Token Ring switches and describes the very different functions of switches in Asynchronous Tranfer Mode (ATM) networks. more...Point-to-Point Telecommunications Protocols
In this WestNet e-Learning module, we describe each point-to-point transmission service available from telecommunications providers. These services are essential for creating private voice networks or wide area data networks. more...Switched Telecommunications Protocols
This WestNet e-Learning module reviews protocols closely associated with the Data Link Layer of the Open Systems Interconnection (OSI) model. more...OSI Network Layers
The OSI Network Layers WBT is the second course of the Network curriculum, which prepares students for the Comptia's Network Certification exam. This course is meant for system administrators and network professionals who want to understand the OSI layers, such as the physical, data link, network, and transport layers in detail. The course describes the problems that can occur in the physical more...WANs
This WestNet e-Learning module introduces the technologies used to connect two or more local area networks (LANs) over an extended distance. We will also introduce the two main classes of technologies used for wide area network (WAN) connectivity: point-to-point services and switched services. more...Configuring Cisco Catalyst Switch Operations
To discuss and implement specific bridging and VLAN Catalyst switch configurations, which provide for scalability, security, and enhanced management of the local area switched network Network administrators responsible for implementing and managing small and medium-sized business networks; network technicians who install network devices in small business environments; Cisco channel resellers who more...Extending Ethernet Networks
To describe the functions and operations of switched LANs and virtual LANs Individuals new to networking concepts and terminology; individuals preparing to take the Interconnecting Cisco Network Devices (ICND) learning path; anyone preparing for the Introduction to Cisco Networking Technologies (INTRO) exam, the Interconnecting Cisco Network Devices (ICND) exam, or the Cisco Certified Network more...CCNT Local Area Networks v6 Part 3
This course teaches Network Management and the tools and protocols associated with that. It also covers advanced network technologies including circuit switched services and packet switched services. A high level of computer skill is not required but learners will probably have had prior experience in the installation, support, and troubleshooting of computer networks. more...Cisco BCMSN 3 0 Campus Networks
To recognize the Cisco hierarchical network model as it pertains to the campus network. Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Defining Virtual Local Area Networks VLANS
To identify how various technologies are best implemented within the Campus Infrastructure module and configure VLANs on access switches to confine traffic to individual VLANs in accordance with the Campus Infrastructure module design Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Implementing Trunks and the Virtual Trunking Protocol VTP
To explain the procedure for configuring both 802.1Q and ISL trunking between two switches, how VLAN configuration of switches within a management domain can be automated with VTP, and identify common VLAN configuration errors and explain the solutions to those errors. Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Implementing Spanning Tree
To implement spanning tree operation in a hierarchical network Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Implementing Inter-VLAN Routing
To implement and verify inter-VLAN routing Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Implementing High Availability In a Campus Environment
To implement high availability technologies and techniques using multilayer switches in a campus environment. Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Wireless LANs
To recognize the features of WLANs and compare wireless LANs with wired LANs, the different WLAN topologies, and explain WLAN technology, standards, and security. Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Configuring and Implementing WLANs
To explain how to use Cisco Systems utilities to configure the Cisco WLAN client, distinguish between autonomous and lightweight WLAN implementations, and explain how to configure autonomous and lightweight Cisco WLAN solutions. Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Configuring Campus Switches to Support Voice
To identify and configure switch infrastructure to support voice Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Mitigating Service Loss and Data Theft
To recognize the potential attacks and how to implement security features in a switched network. Network administrators, network engineers, network managers, systems managers, or network designers. more...CCNT Basic Data Communications v6 0 Part 1
...n teaches about half-duplex and full-duplex circuits, and switched and non-switched data circuits. This section also teaches about circuit switching and packet switching services. Last, this section teaches about display and non-display terminals, and smart and dumb terminals. Candidates for this exam work in the data and telecommunications industries. Their typical job titles include: Network more...CCNT Broadband Technologies v6 0 Part 1
This course introduces broadband technologies and broadband categories and it teaches multiplexing and switching. It also covers network interconnections and SONET. Candidates work in the data and telecommunications industries and are preparing for the Broadband Technologies module of the CCNT exam. Typical job roles include Telecommunications Technicians, Data/Internet/Telecommunications more...CCNT Broadband Technologies v6 0 Part 3
This course teaches ATM and SMDS. It also covers DSL and wireless broadband and VPN technology including VPN security. Candidates work in the data and telecommunications industries and are preparing for the Broadband Technologies module of the CCNT exam. Typical job roles include Telecommunications Technicians, Data/Internet/Telecommunications Professionals. Average computer literacy is desirable. more...CCNT Basic Telecommunications v6 0 Part 1
...ms, ISDN and broadband), CPE, and services (dedicated and switched). The course then covers analog signals, its history and associated variables. It finishes with a coverage of digital systems, its advantages over analog, and including such aspects as Pulse Code Modulation, Time Division Multiplexing, optical standards and loop carriers. Candidates for this curriculum are learners preparing for more...Telecommunications Concepts and Components
This WestNet e-Learning module reviews the fundamental principles and elements of the public-switched telephone system. more...VLANs in Switched Networks
This module defines virtual local area networks more commonly known as VLANs which is an innovative technology that allows switches to logically segment networks. VLANs provide many important benefits such as security traffic and broadcast isolation administrative flexibility and network scalability. Lesson 1 provides an overview of VLAN technology available on both the Catalyst 1900 and 2950 more...Building Cisco Multilayer Switched Networks Part 1
This course covers network models network switches and switch deployment. It then goes on to teach about catalyst images and connectivity as well as configuring VLANs and VTP. more...Building Cisco Multilayer Switched Networks Part 2
This course covers network models network switches and switch deployment. It then goes on to teach about catalyst images and connectivity as well as configuring VLANs and VTP. more...Building Cisco Multilayer Switched Networks Part 3
This course covers module and router redundancy as well as AVVID services and applications. Beginning with RPR and HSRP the course then looks at configuring IP multicasting and IP telephony as well as implementing QoS solutions. more...Building Cisco Multilayer Switched Networks Part 4
This course covers network optimization and securing multilayer switched networks (MSNs). It then examines Metro Ethernet connectivity and tunneling as well as EoMPLS encapsulation. more...Cisco Interconnecting Network Devices Part 2: Configuring Switches
This course is the second in a four-part series that is based on Cisco Systems' instructor-led training, Interconnecting Cisco Network Devices (ICND 1.0). In this series, the concepts, commands, and practice required to configure Cisco switches and routers in multiprotocol internetworks are covered. Installation, configuration, and troubleshooting information and practice that technical support more...Cisco Building Multilayer Switched Networks Part 1: Campus Networks
In this course, you will learn about campus networks, the emerging campus model and the hierarchical model, connecting switch blocks, and configuring switch block connectivity. more...Cisco Building Multilayer Switched Networks Part 2: VLANs
This part of the course deals with VLANs, Transparent Bridging, and the Spanning Tree Protocol in a VLAN Environment. While the first portions of this part of the course may be a refresher for the most advanced students, it is expected that the latter portion of this course will be new to all those in it. In particular the Spanning Tree Protocol in a VLAN environment and scalability issues will more...Cisco Building Multilayer Switched Networks Part 3: Multilayer Switching
The course covers the routing of traffic between VLANs. It presents interVLAN routing issues including distribution layer topology and the configuration of interVLAN routing. Also presented is a practical definition of multilayer switching includes the hardware and software requirements, its components, and how it works. more...Cisco Building Multilayer Switched Networks Part 4: HSRP and Multicast
The BCMSN curriculum is intended to teach network administrators how to build campus networks using multilayer switching technologies over high speed Ethernet. This course is the fourth of a curriculum of 5 BCMSN courses. This course will cover Hot Standby Routing Protocol (HSRP) and Multicasting. more...Cisco Building Multilayer Switched Networks Part 5: Controlling Access
In this course, students learn how to configure network devices to participate in multicast groups. The configuration instructions include enhancing the Route Processor and enabling CGMP. This part of the instruction concludes with students learning about methods used to implement access layer, distribution layer, and core layer control policies in the campus network. more...Cisco Internetwork Troubleshooting - Part 2
This is the second course in a five-part series on Cisco Internetwork Troubleshooting 4.0 (CIT 4.0). CIT 4.0 teaches students how to baseline and troubleshoot an environment using Cisco routers and switches for multiprotocol client hosts and servers. This is an advanced series that shows networking professionals troubleshooting processes on Cisco Routers and Catalyst Switches. This course will more...High Speed Technologies Part 3 - ATM and SMDS
This is the third course in a five part series that students will learn the history and overview of Asynchronous Transfer Mode (ATM) the relationship between ATM and B-ISDN ATM adaptation layer and ATM cells. Students will also learn about virtual paths and channels physical layer ATM traffic control LAN emulation traffic management real-time ATM management ATM v 10 Gbps Ethernet and Switched more...
From 123-CBT Computer Based Training
Building Cisco Multilayer Switched Networks Curriculum
 The Building Cisco Multilayer Switched Networks Curriculum includes the following courses:
Building Cisco Multilayer Switched Networks: Part 1
Building Cisco Multilayer Switched Networks: Part 2
Building Cisco Multilayer Switched Networks: Part 3
Building Cisco Multilayer Switched Networks: Part 4
To review individual course descriptions, please return to the previous page and select the more...Designing Cisco Internetwork Solutions Part 2
...n media with their characteristics.
Distinguish between switched Local Area Network (LAN) and shared LAN segmentation technologies.
Identify characteristics of Wide Area Network (WAN) technology.
Identify considerations for determining application and technical requirements in a Wide Area Network (WAN).
Identify considerations for evaluating cost-effectiveness of a Wide Area Network more...Networking Technologies Series TCP IP Concepts Architecture
...eristic of the packet networks such as X.25, frame relay, Switched Multi-Megabit Data Service (SMDS) and Asynchronous Transfer Mode (ATM).
Identify the features of the X.25 networks.
Match the fields in frame relay with their uses.
Identify the features of SMDS.
Identify the features of ATM technology.
Unit 3: Naming and Addressing
Duration: 2 Hour(s)
Identify the features of more...Building Cisco Remote Access Networks Part 1
...istics of WAN connections.
Identify features of circuit-switched connections.
Identify features of packet-switched connections.
Identify characteristics of modulation and demodulation.
Identify features of cabling technologies.
Identify modem modulation standards.
Identify features of Point-to-Point Protocol (PPP).
Identify commands used to enable Point-to-Point Protocol (PPP). more...Designing for Cisco Internetwork Solutions Part 4
...uish between a Private Branch Exchange (PBX) and a Public Switched Telephone Network (PSTN) switch.
Identify features of local loops and trunks with regard to interswitch communications.
Identify characteristics of Voice over IP (VoIP) solutions.
Match H.323 components with their descriptions.
Identify components of IP telephony.
Identify characteristics of voice delay.
Identify more...Building Cisco Multilayer Switched Networks Part 1
...ponsible for implementing or troubleshooting a multilayer switched network (MSN) in an enterprise environment. CCNP and CCDP candidates CCIE routing/switching candidates.
Deployment:
Self-Study
Accreditation:
CEU credits: 0.80 CEUs
Language Options:
US English
Total Learning Time:
8 hours
Objectives:
Unit 1: Enterprise Composite Network Model (4 hours) more...Building Cisco Multilayer Switched Networks Part 2
...ponsible for implementing or troubleshooting a multilayer switched network (MSN) in an enterprise environment. CCNP and CCDP candidates CCIE routing/switching candidates.
Deployment:
Self-Study
Accreditation:
CEU credits: 0.80 CEUs
Language Options:
US English
Total Learning Time:
8 hours
Objectives:
Unit 1: STP (2 hours)
Identify how Spanning Tree more...Building Cisco Multilayer Switched Networks Part 3
...ponsible for implementing or troubleshooting a multilayer switched network (MSN) in an enterprise environment. CCNP and CCDP candidates CCIE routing/switching candidates.
Deployment:
Self-Study
Accreditation:
CEU credits: 0.80 CEUs
Language Options:
US English
Total Learning Time:
8 hours
Objectives:
Unit 1: Multilayer Switched Networks (2 hours) more...Building Cisco Multilayer Switched Networks Part 4
...ourse covers network optimization and securing multilayer switched networks (MSNs). It then examines Metro Ethernet connectivity and tunneling, as well as EoMPLS encapsulation.
Learn To:
Identify techniques for enhancing network performance.
Identify guidelines for configuring Switched Port Analyzer (SPAN) and Virtual Switched Port Analyzer (VSPAN).
Identify guidelines for more...CCNT Basic Telecommunications v6 0 Part 1
...ms, ISDN and broadband), CPE, and services (dedicated and switched). The course then covers analog signals, its history and associated variables. It finishes with a coverage of digital systems, its advantages over analog, and including such aspects as Pulse Code Modulation, Time Division Multiplexing, optical standards and loop carriers.
Learn To:
Identify stages in the historical more...CCNT Basic Data Communications v6 0 Part 1
...n teaches about half-duplex and full-duplex circuits, and switched and non-switched data circuits. This section also teaches about circuit switching and packet switching services. Last, this section teaches about display and non-display terminals, and smart and dumb terminals.
Learn To:
Identify features of data communications.
Identify features of analog and digital transmission. more...CCNT Local Area Networks v6 0 Part 3
...so covers advanced network technologies including circuit switched services and packet switched services.
Learn To:
Identify network trends.
Identify characteristics of software management.
Identify characteristics of network management.
Identify capabilities of the T1 technology.
Identify features of statistical multiplexing.
Categorize features of circuit and packet more...CCNT Broadband Technologies v 6 0 Part 1
...es of broadband.
Identify characteristics of the Public Switched Telephone Network (PSTN).
Identify features of analog signals.
Identify functions of Synchronous Optical Network (SONET).
Identify features of Synchronous Optical Network (SONET) signaling.
Identify features of the Synchronous Optical Network (SONET) transport structure.
Audience:
Candidates work in the data and more...CCNT Broadband Technologies v6 0 Part 2
This course covers ISDN and BISDN. X.25 and Frame Relay are also taught. This course also covers SS7 and Cell Relay.
Learn To:
Identify key features of Integrated Services Digital Network (ISDN) technology.
Identify characteristics of Integrated Services Digital Network (ISDN) transmission channels.
Identify features of Integrated Services Digital Network (ISDN) Basic Rate Interface more...CCNT Broadband Technologies v6 0 Part 3
...PN security.
Learn To:
Identify the features of Switched Multimegabit Data Service (SMDS).
Identify characteristics of distributed queue dual bus (DQDB).
Identify Switched Multimegabit Data Service Interface Protocol (SIP) levels that compare to the Open Systems Interconnection (OSI) model.
Identify features of Digital Subscriber Line (DSL).
Match Digital Subscriber Line (DSL) more...
From Teach Me IT
OSI Network Layers
...s, and provides an overview of various routing and packet switched mechanisms. After completing this course, the student will be able to:
Describe the types of resource conflicts
Diagnose malfunctioning network interface cards
Troubleshoot Ethernet hub-to-NIC problems
Describe the network attachment devices for token-ring networks
Describe the network attachment devices for FDDI, ATM, more...
| ||||||||||||||||||||||||
|
| ||||||||||||||||||||||||
| Training Directory | New Training Seminars | New Training Providers | | Site Map | Promote Training | Login | Links | ||
|
| ||
| Training-Classes.com by Skillbox® 07/18/08 Copyright 1998-2008 skillbox, inc. All rights reserved |
 |
|
| Are you a Switched training provider? |
| You could be on this page today - for FREE! |
