|
Training Classes
| Learning and Development Resources
| Training Directory
| New Training Seminars
| New Training Providers
| Site Map
| Promote Training Seminars
|
Training Keywords
| Training Seminars
| Training Providers
| Regions
|
| Advertise Training Seminars
| Login
|
||||||||||||||||||||||||
Switches Training Seminars and Classes
From Serebra Learning Corporation
Cisco Interconnecting Network Devices Part 1: Establishing Workgroups
   This course is the first in a four-part series that is based on Cisco Systems' instructor-led training, Interconnecting Cisco Network Devices (ICND 1.0). In this series, the concepts, commands, and practice required to configure Cisco switches and routers in multiprotocol internetworks are covered. Installation, configuration, and troubleshooting information and practice that technical support more...Cisco Interconnecting Network Devices Part 2: Configuring Switches
This course is the second in a four-part series that is based on Cisco Systems' instructor-led training, Interconnecting Cisco Network Devices (ICND 1.0). In this series, the concepts, commands, and practice required to configure Cisco switches and routers in multiprotocol internetworks are covered. Installation, configuration, and troubleshooting information and practice that technical support more...Cisco Interconnecting Network Devices Part 3: Configuring Routers
This course is the third in a four-part series that is based on Cisco Systems' instructor-led training, Interconnecting Cisco Network Devices (ICND 1.0). In this series, the concepts, commands, and practice required to configure Cisco switches and routers in multiprotocol internetworks are covered. Installation, configuration, and troubleshooting information and practice that technical support more...Cisco Interconnecting Network Devices Part 4: Connecting to WANs
This course is the last in a four-part series that is based on Cisco Systems' instructor-led training, Interconnecting Cisco Network Devices (ICND 1.0). In this series, the concepts, commands, and practice required to configure Cisco switches and routers in multiprotocol internetworks are covered. Installation, configuration, and troubleshooting information and practice that technical support more...Cisco Internetwork Troubleshooting - Part 1
This is the first course in a five-part series on Cisco Internetwork Troubleshooting 4.0 (CIT 4.0). CIT 4.0 teaches students how to baseline and troubleshoot an environment using Cisco routers and switches for multiprotocol client hosts and servers. This is an advanced series that shows networking professionals troubleshooting processes on Cisco Routers and Catalyst Switches. This course will more...Cisco Internetwork Troubleshooting - Part 2
This is the second course in a five-part series on Cisco Internetwork Troubleshooting 4.0 (CIT 4.0). CIT 4.0 teaches students how to baseline and troubleshoot an environment using Cisco routers and switches for multiprotocol client hosts and servers. This is an advanced series that shows networking professionals troubleshooting processes on Cisco Routers and Catalyst Switches. This course will more...Cisco Internetwork Troubleshooting - Part 3
This is the third course in a five-part series on Cisco Internetwork Troubleshooting 4.0 (CIT 4.0). CIT 4.0 teaches students how to baseline and troubleshoot an environment using Cisco routers and switches for multiprotocol client hosts and servers. This is an advanced series that shows networking professionals troubleshooting processes on Cisco Routers and Catalyst Switches. This course will more...Cisco Internetwork Troubleshooting - Part 4
This is the fourth course in a five-part series on Cisco Internetwork Troubleshooting 4.0 (CIT 4.0). CIT 4.0 teaches students how to baseline and troubleshoot an environment using Cisco routers and switches for multiprotocol client hosts and servers. This is an advanced series that shows networking professionals troubleshooting processes on Cisco Routers and Catalyst Switches. This course will more...Cisco Internetwork Troubleshooting - Part 5
This is the last course in a five-part series on Cisco Internetwork Troubleshooting 4.0 (CIT 4.0). CIT 4.0 teaches students how to baseline and troubleshoot an environment using Cisco routers and switches for multiprotocol client hosts and servers. This is an advanced series that shows networking professionals troubleshooting processes on Cisco Routers and Catalyst Switches. This course will cover more...VPNs Using Cisco Pre-Shared Keys
To configure VPNs using Cisco pre-shared keys The primary target includes network designers, network administrators, network engineers, and system engineers. more...Further Cisco IOS Security Features
To configure the IOS Firewall authentication proxy and the IPS The primary target includes network designers, network administrators, network engineers, and system engineers. more...LAN Implementation
In this WestNet e-Learning module, we review the operation and implementation of three established local area network (LAN) technologies: Ethernet, Token Ring, and Fiber Distributed Data Interface (FDDI). more...Configuring Testing and Verifying IPSec
To configure, test, and verify IPSec The primary target includes network designers, network administrators, network engineers, and system engineers. more...ISAKMP and IPSec
To recognize how to configure and verify ISAKMP and IPSec The primary target includes network designers, network administrators, network engineers, and system engineers. more...Configuring Cisco Easy VPN Remote
To recognize how to configure Easy VPN Remote for the VPN Client 4.x and remote access routers The primary target includes network designers, network administrators, network engineers, and system engineers. more...Remote Access Using Cisco Easy VPN
To configure remote access using a Cisco Easy VPN server The primary target includes network designers, network administrators, network engineers, and system engineers. more...Components Used to Build Networks
This WestNet e-Learning module introduces internetworking devices, such as repeaters, hubs, switches, bridges, routers, and gateways as the connectors between the individual segments of a broadcast network that has been broken down into separate segments. more...Testing and Instrumenting C Applications
To introduce the concepts of software testing and debugging and to describe the use of the Debug and Trace programmatic classes in the .NET Framework class library and the Visual Studio .NET and SDK interactive debuggers Windows developers seeking to update their knowledge of and skills in developing, testing, and debugging software applications in Visual Studio .NET or pursuing MCAD or MCSD .NET more...Testing and Instrumenting Web Applications in C
To introduce the concepts of software testing and debugging and to describe how to instrument an application for tracing and debugging in .NET Web developers seeking to update their knowledge and skills when developing, testing, and debugging software applications in Visual Studio .NET or pursuing MCAD or MCSD .NET certification more...Testing and Instrumenting Web Applications in VB NET
To introduce the concepts of software testing and debugging and to describe how to instrument an application for tracing and debugging in .NET Web developers seeking to update their knowledge and skills when developing, testing, and debugging software applications in Visual Studio .NET or pursuing MCAD or MCSD .NET certification more...Testing and Instrumenting VB NET Applications
To introduce the concepts of software testing and debugging and to describe the use of the Debug and Trace programmatic classes in the .NET Framework class library and the Visual Studio .NET and SDK interactive debuggers Windows developers seeking to update their knowledge of and skills in developing, testing, and debugging software applications in Visual Studio .NET or pursuing MCAD or MCSD .NET more...IMS DC Programming II
This course expands on the concepts developed in IMS/DC Programming I, and further helps new IMS/DC developers to maintain existing systems or develop new IMS/DC systems. Areas of interest include MFS features and facilities, terminal message switches, and program-to-program message switches. Some tips to debug your online application program, and some current and future trends in IMS/DC more...WAN Fundamentals
This course explains the emerging WAN internetworking technologies. It also covers the basics of data communication, digital data services. This course is designed for technical managers, help desk/support personnel and professionals who require an understanding of WAN, MAN, internetworking, digital data services, and advanced data communications. more...WAN Solutions
This WestNet e-Learning module covers ATM concepts, ATM implementation, ATM devices, and SMDS. more...Analyzing the Network
This module covers network performance concepts, estimating traffic volumes and patterns, taking baseline measurements of LAN traffic, and developing a traffic specification document. more...Logical Network Design
This module focuses on technological design considerations, such as physical media characteristics, wide-area performance, network management, security, and Transmission Control Protocol/Internet Protocol (TCP/IP) addressing. more...Layer 2 Devices
This WestNet e-Learning module presents detailed explanations of the way bridges and switches work. It discusses the differences between Ethernet and Token Ring switches and describes the very different functions of switches in Asynchronous Tranfer Mode (ATM) networks. more...Network Components
In this WestNet e-Learning module, we will discuss repeaters, hubs, bridges, switches, routers, VLANs, and Gateways. more...Cisco Catalyst Switch Configuration
To discuss the major functions performed by Cisco Catalyst switches in an IP telephony network IT professionals responsible for installing, configuring, and maintaining the ongoing administration of a Cisco IP telephony solution; candidates preparing for the Cisco IP Telephony exam (642-444 CIPT) more...Operation and Configuration of Cisco IOS Switches
To use the available configuration tools to establish connectivity to the appropriate network device in order to complete initial switch configurations and to verify the default configuration and status of switch devices Individuals new to networking concepts and terminology; individuals preparing to take the Interconnecting Cisco Network Devices (ICND) learning path; anyone preparing for the more...Managing the Cisco Network Environment
To discover and determine the status of connected devices on a network and enable connections to these devices Individuals new to networking concepts and terminology; individuals preparing to take the Interconnecting Cisco Network Devices (ICND) learning path; anyone preparing for the Introduction to Cisco Networking Technologies (INTRO) exam, the Interconnecting Cisco Network Devices (ICND) exam, more...Layer 2 Security
To recognize, troubleshoot, and mitigate layer 2 attacks The primary target includes network designers, network administrators, network engineers, and system engineers. more...ACS for Windows Server
To configure Cisco Secure ACS for Windows Server The primary target includes network designers, network administrators, network engineers, and system engineers. more...Cisco IOS Security Features
To configure the IOS Firewall for Cisco routers The primary target includes network designers, network administrators, network engineers, and system engineers. more...VPNs Using Certification Authorities
to recognize how to configure and verify IPSec VPN using CAs The primary target includes network designers, network administrators, network engineers, and system engineers. more...802 1x Port-based Authentication and Best Practice
To recognize how to configure 802.1x port-based authentication and recommend a best practice for threat mitigation The primary target includes network designers, network administrators, network engineers, and system engineers. more...Cisco Router and Security Device Manager
To recognize how to install and configure SDM on a Cisco router The primary target includes network designers, network administrators, network engineers, and system engineers. more...Cisco BCMSN 3 0 Campus Networks
To recognize the Cisco hierarchical network model as it pertains to the campus network. Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Defining Virtual Local Area Networks VLANS
To identify how various technologies are best implemented within the Campus Infrastructure module and configure VLANs on access switches to confine traffic to individual VLANs in accordance with the Campus Infrastructure module design Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Implementing Trunks and the Virtual Trunking Protocol VTP
To explain the procedure for configuring both 802.1Q and ISL trunking between two switches, how VLAN configuration of switches within a management domain can be automated with VTP, and identify common VLAN configuration errors and explain the solutions to those errors. Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Implementing Inter-VLAN Routing
To implement and verify inter-VLAN routing Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Implementing High Availability In a Campus Environment
To implement high availability technologies and techniques using multilayer switches in a campus environment. Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Configuring Campus Switches to Support Voice
To identify and configure switch infrastructure to support voice Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco BCMSN 3 0 Mitigating Service Loss and Data Theft
To recognize the potential attacks and how to implement security features in a switched network. Network administrators, network engineers, network managers, systems managers, or network designers. more...Cisco Catalyst Switches and IP Communicator
To configure a switch port to receive voice and data traffic on different VLANs and install and configure Cisco IP Communicator with Cisco CallManager to make IP Phone calls from the PC. IT professionals responsible for installing, configuring, and maintaining the ongoing administration of a Cisco IP Telephony solution; candidates preparing for the Cisco IP Telephony exam (642-444 CIPT) more...Hand and Power Tool Safety
...ge of guards specify what tools are equipped with safety switches identify specific hazards and control measures related to the use of electric tools identify specific hazards and control measures related to the use of power grinders identify specific hazards and control measures related to the use of pneumatic tools identify specific hazards and control measures related to the use of more...Introduction to Networking
This module begins with an overview of computing that includes topics such as PC components measurement terms and the decimal binary and hexadecimal number conversion processes. Lesson 2 covers network fundamentals discussing important terminology used throughout the text and in the field. The highlight of this lesson is the Open Systems Interconnect (OSI) model. Lesson 3 discusses network more...Switching Fundamentals
This module addresses switching fundamentals. Lesson 1 discusses LAN transmissions and how they share the available network bandwidth. The lesson introduces the essential terms collision domain and broadcast domain which describe network access and device functionality. Bridging and switching is discussed in Lesson 2. Although different in how they operate both devices learn and store MAC address more...Switch Technology
...ology. It begins by comparing and contrasting bridges and switches and then discusses todaya s switching technology in more detail. Lesson 2 reviews the use of redundant network links and their potential for negative impact on a network. Lesson 3 defines how active loops are avoided with a mature but reliable Spanning Tree Protocol. In addition the lesson has up-to-date information about Rapid more...VLANs in Switched Networks
...wn as VLANs which is an innovative technology that allows switches to logically segment networks. VLANs provide many important benefits such as security traffic and broadcast isolation administrative flexibility and network scalability. Lesson 1 provides an overview of VLAN technology available on both the Catalyst 1900 and 2950 series of switch products. New information has been included on more...Building Cisco Multilayer Switched Networks Part 1
This course covers network models network switches and switch deployment. It then goes on to teach about catalyst images and connectivity as well as configuring VLANs and VTP. more...Building Cisco Multilayer Switched Networks Part 2
This course covers network models network switches and switch deployment. It then goes on to teach about catalyst images and connectivity as well as configuring VLANs and VTP. more...Interconnecting Cisco Network Devices (ICND 2.1)
Interconnecting Cisco Network Devices (ICND) focuses on using Cisco Catalyst switches and Cisco routers connected in local-area networks (LANs) and wide-area networks (WANs) typically found at small to medium network sites. Upon completion of this course, students will be able to select, connect, configure, and troubleshoot the various Cisco networking devices. This course will prepare students to more...Microsoft Commerce Server 2000 Design and Implementation Part 5: Infrastructure, Security, & Admin.
This is the final course in a five part series that covers designing a network infrastructure to support Commerce Server 2000, describing the infrastructure components including Web Farms, staging servers and development servers, and covering network performance improvement by using switches to connect servers. The course focuses on providing network security, including configuring firewalls and more...Cisco Interconnecting Network Devices Part 1: Establishing Workgroups
This course is the first in a four-part series that is based on Cisco Systems' instructor-led training, Interconnecting Cisco Network Devices (ICND 1.0). In this series, the concepts, commands, and practice required to configure Cisco switches and routers in multiprotocol internetworks are covered. Installation, configuration, and troubleshooting information and practice that technical support more...Cisco Interconnecting Network Devices Part 2: Configuring Switches
This course is the second in a four-part series that is based on Cisco Systems' instructor-led training, Interconnecting Cisco Network Devices (ICND 1.0). In this series, the concepts, commands, and practice required to configure Cisco switches and routers in multiprotocol internetworks are covered. Installation, configuration, and troubleshooting information and practice that technical support more...Cisco Interconnecting Network Devices Part 3: Configuring Routers
This course is the third in a four-part series that is based on Cisco Systems' instructor-led training, Interconnecting Cisco Network Devices (ICND 1.0). In this series, the concepts, commands, and practice required to configure Cisco switches and routers in multiprotocol internetworks are covered. Installation, configuration, and troubleshooting information and practice that technical support more...Cisco Interconnecting Network Devices Part 4: Connecting to WANs
This course is the last in a four-part series that is based on Cisco Systems' instructor-led training, Interconnecting Cisco Network Devices (ICND 1.0). In this series, the concepts, commands, and practice required to configure Cisco switches and routers in multiprotocol internetworks are covered. Installation, configuration, and troubleshooting information and practice that technical support more...Cisco Internetwork Troubleshooting - Part 1
This is the first course in a five-part series on Cisco Internetwork Troubleshooting 4.0 (CIT 4.0). CIT 4.0 teaches students how to baseline and troubleshoot an environment using Cisco routers and switches for multiprotocol client hosts and servers. This is an advanced series that shows networking professionals troubleshooting processes on Cisco Routers and Catalyst Switches. This course will more...Cisco Internetwork Troubleshooting - Part 2
This is the second course in a five-part series on Cisco Internetwork Troubleshooting 4.0 (CIT 4.0). CIT 4.0 teaches students how to baseline and troubleshoot an environment using Cisco routers and switches for multiprotocol client hosts and servers. This is an advanced series that shows networking professionals troubleshooting processes on Cisco Routers and Catalyst Switches. This course will more...Cisco Internetwork Troubleshooting - Part 3
This is the third course in a five-part series on Cisco Internetwork Troubleshooting 4.0 (CIT 4.0). CIT 4.0 teaches students how to baseline and troubleshoot an environment using Cisco routers and switches for multiprotocol client hosts and servers. This is an advanced series that shows networking professionals troubleshooting processes on Cisco Routers and Catalyst Switches. This course will more...Cisco Internetwork Troubleshooting - Part 4
This is the fourth course in a five-part series on Cisco Internetwork Troubleshooting 4.0 (CIT 4.0). CIT 4.0 teaches students how to baseline and troubleshoot an environment using Cisco routers and switches for multiprotocol client hosts and servers. This is an advanced series that shows networking professionals troubleshooting processes on Cisco Routers and Catalyst Switches. This course will more...Cisco Internetwork Troubleshooting - Part 5
This is the last course in a five-part series on Cisco Internetwork Troubleshooting 4.0 (CIT 4.0). CIT 4.0 teaches students how to baseline and troubleshoot an environment using Cisco routers and switches for multiprotocol client hosts and servers. This is an advanced series that shows networking professionals troubleshooting processes on Cisco Routers and Catalyst Switches. This course will cover more...Microsoft Commerce Server 2000 Design and Implementation Part 5: Infrastructure, Security, & Admin.
This is the final course in a five part series that covers designing a network infrastructure to support Commerce Server 2000 describing the infrastructure components including Web Farms staging servers and development servers and covering network performance improvement by using switches to connect servers. The course focuses on providing network security including configuring firewalls and more...LAN/WAN Integration
This course will cover vendor-independent issues relating to the integration of key networking technologies. LAN/WAN Integration is designed to explain internetworking between LANs as well as LANs with WANs. Students will learn about networking services protocols architectures and technologies and will provide new insight into the methods of integrating LANs with WANs. Additionally this course more...
From 123-CBT Computer Based Training
Oracle9i Database Admin Create a Database
 ... log files. • Identify the situations in which log switches and checkpoints occur, force log switches and checkpoints, and identify the functions of parameters that control the checkpoints. • Identify the features of archive modes and retrieve information about the archive modes and online redo log groups and members. • Plan the number and size of online redo log files, more...Interconnecting Cisco Networking Devices Part 1
...earn To:
Identify features and functions of Layer 2 switches and bridges.
Sequence the steps in managing Layer 2 addresses.
Sequence the steps for forwarding and filtering frames.
Identify features of the Cisco IOS software.
Identify guidelines for the physical startup of a Catalyst switch.
Identify the states of the LEDs on Catalyst 1900 and 2950 switches.
Identify features more...Designing Cisco Internetwork Solutions Part 2
...ce (QoS) services implemented on Local Area Network (LAN) switches.
Identify access and distribution considerations for Enterprise Campus building design.
Differentiate between L2, L3, split L2, and dual-path L3 Enterprise Campus Backbone designs.
Identify considerations for designing the Server Farm module.
Identify considerations for designing the Edge Distribution module.
Unit 2: more...Windows NT Server 4 0 Troubleshooting in the Enterprise
Course Overview
This is the fifth course in a seven-part series intended for network support professionals working in a Microsoft Windows NT Server 4.0 based enterprise environment. The series aims to enable these professionals to pass Microsoft's certification examination 70-68. This series gives participants the opportunity to design, implement, and support the Windows NT Server network more...Oracle8 Database Administration - Create Databases
...members.
Control files.
Identify the process of log switches and checkpoints.
Manage tablespaces and data files.
C ontent Emphasis
Skills-Based
A udience
Database Administrators, system administrators, network administrators, and technical support professionals. Prior to taking this course, participants should be familiar with SQL and PL/SQL using Procedure Builder, or more...Exchange Server 5 5 Design Implementation - Part 6
...entify the features of Lotus cc:Mail.
Identify the input switches required to customize a site address.
Match the Lotus cc:Mail processes with their functions.
Sequence the steps of message flow between the Exchange Server and the Connector for Lotus cc:Mail.
Install Lotus cc:Mail Post Office by using the Windows NT Explorer.
Match the installed components of Lotus cc:Mail Connector with more...Exchange Server 5 5 Concepts and Administration - Part 3
Course Overview
This is the final course in a three part series that will provide IT professionals the knowledge to install, configure, administer and troubleshoot Microsoft Exchange Server 5.5 in single-site and multiple-site environments.
L earn To:
Identify public folder contents, create a public folder strategy, view and assign public folder permissions and set public folder more...Exchange Server 5 5 Concepts and Administration - Part 1
... functions.
Match the Administrator Program command line switches with their functions.
Match the different roles in an Exchange Server with their permissions.
Match the customization options supported by the Administrator Program with their functions.
Match the Windows NT Server Administration Tools with their functions.
Create a mailbox by using User Manager for Domains extension more...Cisco Networking Technologies Introduction Part 3
...fy the status of light emitting diodes (LEDs) on Catalyst switches.
Identify the status of port light emitting diodes (LEDs) during the different stages of Catalyst switch power-on self test (POST).
Identify syntax for responding to initial output from Catalyst 1900 and 2950 switch bootups.
Identify the EXEC modes for logging in to a Catalyst switch to begin initial configuration. more...Building Cisco Multilayer Switched Networks Part 1
...switches, and switch deployment. It then goes on to teach about catalyst images and connectivity, as well as configuring VLANs and VTP.
Learn To:
Identify features of each communication type in a large network.
Identify features of a Layer 2 switch.
Identify features of routers.
Identify features of VLANs.
Identify differences between end-to-end and local VLANs.
Identify more...Building Cisco Multilayer Switched Networks Part 2
...switches, and switch deployment. It then goes on to teach about catalyst images and connectivity, as well as configuring VLANs and VTP.
Learn To:
Identify features of transparent bridges.
Identify how Spanning Tree Protocol (STP) prevents bridging loops.
Identify the features of the BID that can be chosen as the root switch.
Identify Cisco enhancements to Spanning Tree Protocol more...LAN WAN Integration
...nnectivity hardware devices such as bridges, routers, and switches. Learn To Match types of standard network topologies with their features. Identify features of a local area network (LAN), a metropolitan area network (MAN), and a wide area network (WAN). Identify the advantages of file sharing. more...Cisco Networking Technologies Introduction Part 1
...features of bridges.
Identify functions and features of switches.
Identify functions and features of routers.
Identify features of voice, Digital Subscriber Line (DSL), and optical devices.
Identify features of multilayer security devices.
Unit 2: Network Topologies, Standards, and Types (4 hours)
Identify features of physical topologies.
Identify features of a bus topology. more...Cisco Networking Technologies Introduction Part 2
...al Area Network (LAN) switching.
Identify categories of switches.
Identify how switching works in a Local Area Network (LAN) environment.
Identify functions of the Transmission Control Protocol/Internet protocol (TCP/IP) Network layer.
Identify characteristics of Internet Protocol (IP).
Identify functions of Internet Control Message Protocol (ICMP).
Audience:
Anyone wishing to more...Commerce Server 2000 Design Impl Part 5 Infra Sec Admin
...rs, and covering network performance improvement by using switches to connect servers. The course focuses on providing network security, including configuring firewalls and securing Commerce Server files and resources. Topics covering the administration of Commerce Server 2000, including performance monitoring, resource maintenance, and Data Warehousing are also covered. Learn To: o more...A 2003 OS Technologies Part 2 Configuring Managing
This course will present instruction on system interfaces and the underlying command-line functions and utilities to manage the major operating systems. Learners will be introduced to the concepts and procedures for managing disks, file systems, and files, along with procedures for adding and configuring device drivers. Learn To To identify key features of Windows more...CCNT Local Area Networks v6 0 Part 2
This course covers transmission techniques and media. LAN components and Internetworking components are also taught. This course also covers access connectivity devices.
Learn To:
Identify features of analog signals.
Identify features of digital signals.
Identify features of baseband and broadband transmissions.
Identify features of network components.
Identify features of server more...Implementing Managing MS Exchange Server 2003 Installing
...forests and domains.
Identify functions of installation switches used by Microsoft Exchange Installation Wizard.
Identify the steps to install Microsoft Exchange Server 2003 in a new organization.
Identify key aspects of unattended installation.
Remove Microsoft Exchange Server 2003 from an organization.
Unit 2: Upgrading to Exchange Server 2003
Identify key aspects of more...
From Automated Learning Corporation
Introduction to Electronic Components - On-Line Training
Web-training with certification test for electronic assembly operators and others who deal with electronic components in their work. Objectives: Identify resistors, capacitors, and semiconductors Describe different types of wires and cables Explain the difference between switches and relays. LearnTech training incorporates interactive learning checks throughout the instructional sequences. For more...
From The Virtual Training Company
Cisco CCNA 640-801
VTC's Cisco CCNA 640-801 training tutorial is designed to help you pass certification test and become a Cisco Certified Network Associate (CCNA). VTC Author Bill Ferguson specifically targets the four major objective groups listed on the Cisco web site. These include Planning and Designing LANs and WANs, Implementation and Operation of Routers and Switches, Troubleshooting Cisco Networks, and more...CCNA ICND
Virtual Training Company's "CCNA/ICND" (Interconnecting Cisco Network Devices)
will prepare you for the Cisco CCNA Certification test # 640-607.
This tutorial is the basis for all Network Training. Your instructor, Bill Ferguson,
will cover general networking knowledge, troubleshooting of networks, and
the specific Cisco, IOS and CLI interface. You will also learn about the OSI Model and the uses more...
From Teach Me IT
Network Infrastructure Security - Part 1
...ed to routers.
features of modems.
features of Hubs and Switches.
security-related features of wireless devices.
features of a Remote Access Service (RAS) server.
features of Virtual Private Networks (VPNs).
security-related features of Private Branch Exchange (PBX) systems.
basic concepts of firewalls.
features of various firewall technologies.
features of Intrusion Detection Systems more...
| ||||||||||||||||||||||||
|
| ||||||||||||||||||||||||
| Training Directory | New Training Seminars | New Training Providers | | Site Map | Promote Training | Login | Links | ||
|
| ||
| Training-Classes.com by Skillbox® 07/18/08 Copyright 1998-2008 skillbox, inc. All rights reserved |
 |
|
| Are you a Switches training provider? |
| You could be on this page today - for FREE! |
