Description
This is the second course in a four part series for IT professionals who intend to set up, configure, use and support TCP/IP on Microsoft Windows NT 4.0. The series aims to enable the professionals to pass Microsoft exam 70-59, Internetworking Microsoft TCP/IP on Microsoft Windows NT 4.0.
Audience
This course is for IT professionals seeking Microsoft Certified Systems Engineer or Certified Product Specialist status and provides the skills necessary to set up, configure, use, and support TCP/IP on Microsoft Windows NT 4.0. Participants should have taken Supporting Microsoft Windows NT 4.0 Core Technologies (courses 71410, 71411, 71412 and 71413) and the first course in this series.
Prerequisites
(Currently no course prerequisite information)
Objective
- Identify the static and dynamic routing process.
- Implement routing and manipulate static entries in a routing table.
- Install and configure DHCP.
- Rectify DHCP configuration errors, manage the DHCP database and create a DHCP relay agent.
- Identify the definition of NetBIOS and NetBIOS names.
- Identify the functions and advantages of WINS.
Topics Include
Unit 1: Implementing IP Routing - Identify the process of IP routing.
- Identify the features of static IP routing.
- Identify the features of dynamic IP routing.
- Identify the features of Routing Information Protocol.
- Identify the limitations of Routing Information Protocol.
- Identify the activities that need to be performed to integrate static and dynamic routing.
- Configure a Windows NT computer to act as a Windows NT router.
- Display the route a packet takes to reach its destination using the TRACERT utility.
- Identify the components of a routing table.
- Display the entries in a routing table.
- Remove the default gateway address from a routing table.
- Add a static routing table entry for a router using the ROUTE utility.
- Restore the address for the default gateway in the local routing table.
- Test the configured default gateway address by displaying the contents of the routing table.
Unit 2: Fundamentals of DHCP - Identify the function of Dynamic Host Configuration Protocol (DHCP).
- Identify the differences between manually configuring TCP/IP and dynamically configuring TCP/IP using DHCP.
- Match the four phases DHCP uses to configure a DHCP client with the activities that occur in them.
- Identify the features of the IP lease request and offer phases.
- Identify the features of the IP lease selection and acknowledgement process.
- Identify the activities in the IP lease renewal process.
- Identify the guidelines for configuring IP addresses for allocating to clients in a multiple DHCP environment.
- Identify the implementation considerations for installing DHCP.
- Identify the requirements for implementing DHCP.
- Determine the network adapter card address from the DHCP server.
- Install the DHCP Server Service on the DHCP server.
- Create a DHCP scope that consists of one IP address with an assigned lease time of one day.
- Configure a DHCP scope option that automatically assigns a default gateway address to DHCP clients.
- Add a reservation for a client from the DHCP server.
- Test the DHCP server configuration by starting the DHCP client.
Unit 3: Advanced Operations on DHCP - Display the DHCP server listing of leased addresses on the DHCP server.
- Renew the DHCP lease assigned to the DHCP client computer.
- Stop the Microsoft DHCP Server service to prevent address lease assignments and renewals.
- Display the result of an attempt to renew a lease when the DHCP server is unavailable.
- Release the IP address lease assigned to the DHCP client computer by using the IPCONFIG utility.
- Start Microsoft DHCP Server service to allow IP lease assignments and renewals.
- Reconfigure the DHCP Server to stop and start up the DHCP Server service manually.
- Reconfigure a DHCP client to use a static IP address by changing the configuration information.
- Restore the DHCP database manually using Regedit.
- Compact the DHCP database using the JETPACK utility.
- Identify the definition of DHCP relay agent.
- Install DHCP relay agent on a computer on a subnet.
- Start the Network Monitor to capture DHCP packets on a DHCP client.
- Install the DHCP client on a computer on a subnet which is not a designated DHCP relay agent.
- Disable the DHCP relay agent from a DHCP relay computer.
- Configure the DHCP relay computer to use a static IP address.
Unit 4: NetBIOS Over TCP/IP - Identify the definition of NetBIOS, features of the NetBIOS utilities and NetBIOS scope ID.
- Match the NetBIOS processes with the activities that occur in them.
- Identify the features of the NetBIOS scope.
- Sequence the steps for resolving local NetBIOS names by using a broadcast.
- Identify the functions of the NBSTAT utility.
- Sequence the steps for resolving NetBIOS names by using a NetBIOS name server.
- Sequence the steps for resolving NetBIOS names using Microsoft methods.
- Match the NetBIOS over TCP/IP name resolution nodes with their functions.
- Identify the definition of the LMHOSTS file.
- Resolve a remote computer name by using a local broadcast.
- Configure LMHOSTS to resolve a remote NetBIOS computer name at the command prompt.
- Resolve NetBIOS names by using the NetBIOS name cache.
Unit 5: Implementing Windows Internet Name Service - Identify the functions of WINS.
- Identify the steps used to resolve a NetBIOS name to an IP address.
- Identify the advantages of WINS.
- Identify the phases used to resolve a NetBIOS name.
- Sequence the steps in the NetBIOS name registration with a WINS server.
- Sequence the steps in the lease renewal of a NetBIOS name with a WINS server.
- Identify the steps in the NetBIOS name release from a WINS server.
- Sequence the steps in resolving a NetBIOS name to an IP address by using a WINS server.
- Identify the considerations for implementing WINS in an internetwork.
- Identify the procedures for implementing WINS.
- Install a WINS server.
- Start the DHCP Server service.
- Assign WINS server address by using DHCP Manager.
- Renew the DHCP lease of a client at the command prompt.
- Resolve a NetBIOS name.
- Configure a static mapping for a non-WINS client by using WINS Manager.
- Configure a WINS proxy agent.
- Remove the WINS proxy agent.
Duration
8
Minimum Requirements
The CDROM version of this course requires:
- At least a 486DX 33Mhz CPU.
- Microsoft Windows 3.1 or higher and a Microsoft compatible mouse.
- At least 8MB RAM.
- At least VGA graphics capability with a minimum 512K video RAM (1MB video RAM recommended).
- At least a double speed CDROM drive.
- An MPC compliant sound card with attached speakers or headphones is recommended (Currently, only the CDROM version supports audio).
The network version of this course requires:
- At least a 486DX 33Mhz CPU.
- Microsoft Windows 3.1 or higher and a Microsoft compatible mouse.
- At least 8MB RAM and 22MB available hard disk space or file server space.
- At least VGA graphics capability with a minimum 512K video RAM (1MB video RAM recommended).
Media
|
