Training Classes | Learning and Development Resources | Training Directory | New Training Seminars | New Training Providers | Site Map | Promote Training Seminars | Training Keywords | Training Seminars | Training Providers | Regions | Training Search | Advertise Training Seminars | Login
Provided by: Serebra Learning Corporation

Novell NetWare Service and Support - Part 2

Click here for more information or to take this course 		Serebra Learning Corporation
  home  : Computer  : Novell  : NetWare
Get More Information
Search for Training
Find Your Genius!
What do you want to learn about?

Training Provided by Serebra Learning Corporation

This course is the second in a five-part series on Novell NetWare Service and Support. This series focuses on the prevention diagnosis and resolution of hardware-related problems that network professionals encounter while working with a network. This course will cover installing configuring and troubleshooting various types of networks and network storage devices.

Training Avaliability and Delivery

This is primarily online training
on-line e-learning cbt (computer based)This is an online eLearning or CBT training program
Contact Serebra Learning Corporation for more information
Schedule:8 hours
Training Presented in:English
Related Keywords:  novell netware service   support 

Training Program Details

Audience

Students should be CNE candidates or technical support personnel responsible for diagnosing and resolving problems with NetWare networks. Participants should have an understanding of (or experience with) personal computers operating systems and network technology; experience with DOS; a working knowledge of Windows 95 or Windows NT Workstation; and experience using NetWare. In addition students should have taken the first part of this series (course 82211). This course series is an approved study guide that will help certification candidates prepare for exam 50-635 and is equivalent to Novell class 580.

Objective

  • Install configure and troubleshoot various types of networks.
  • Install and troubleshoot network storage devices.

Topics Include

Unit 1: Working With Networks

  • Identify the characteristics of a Token Ring network.
  • Identify the sequence of activities depicting the working of a Token ring network.
  • Match the components of a typical Token Ring Network with their features.
  • Identify the limitations of Token ring cabling.
  • Identify the sequence of steps involved in installing a token ring connection.
  • Identify the steps taken to correct problems in a Token Ring Network.
  • Select the characteristics of an Ethernet network.
  • Identify the activities involved in the working of an Ethernet network.
  • Identify the sequence of steps involved in installing an Ethernet Connection.
  • Identify the steps to be taken to troubleshoot an Ethernet connection.
  • Identify the characteristics of a Fiber Distributed Data Interface (FDDI) network.
  • Identify the steps involved in the working of an FDDI network.
  • Identify the steps involved in troubleshooting an FDDI network.
  • Identify the characteristics of an Asynchronous Transfer Mode (ATM) network.
  • Identify the steps to connect an Ethernet network to the other networks.
  • Identify the steps to connect a Token Ring with other networks.

Unit 2: Network Storage Devices

  • Match hard disk components with their functions.
  • Identify the differences between the features of the two Integrated Drive Electronics (IDE) versions.
  • Identify the limitations of IDE in NetWare.
  • Identify the features of three Small Computer System Interface (SCSI) versions.
  • Identify the guidelines for installing hard disks.
  • Sequence the steps to setup a SCSI disk.
  • Identify the methods used for termination based on the placement of the SCSI disks.
  • Identify the guidelines for working with SCSI cables.
  • Sequence the steps to physically install an IDE disk.
  • Identify the jumpers that are set to configure a controller board.
  • Identify the situations in which an IDE disk is configured in a specified mode.
  • Identify the guidelines to attach a cable from an IDE controller board to an IDE disk.
  • Identify the steps involved in setting the Complementary Metal-Oxide Semiconductor (CMOS) disk type for an IDE disk.
  • Identify the situations when a low-level format is performed.
  • Create an active DOS partition by using a DOS boot diskette.
  • Identify the tasks that are accomplished when performing a high-level format.
  • Install the Virtual Loadable Module (VLM) Client by using the VLM Client Installation diskette.
  • Identify the advantages of using a CD-ROM.
  • Install appropriate drivers for a CD-ROM drive by using the server console.
  • Mount a CD-ROM as a NetWare volume.
  • Identify the solutions for a given networking problem.
  • Identify the steps to troubleshoot a given SCSI problem.
  • Troubleshoot the problem in installing an IDE disk when the wrong I/O port address is specified by editing the STARTUP.NCF file.

Duration

8

Minimum Requirements

The CDROM version of this course requires:

  • At least a 486DX 33Mhz CPU.
  • Microsoft Windows 3.1 or higher and a Microsoft compatible mouse.
  • At least 8MB RAM.
  • At least VGA graphics capability with a minimum 512K video RAM (1MB video RAM recommended).
  • At least a double speed CDROM drive.
  • An MPC compliant sound card with attached speakers or headphones is recommended (Currently only the CDROM version supports audio).
The network version of this course requires:
  • At least a 486DX 33Mhz CPU.
  • Microsoft Windows 3.1 or higher and a Microsoft compatible mouse.
  • At least 8MB RAM and 22MB available hard disk space or file server space.
  • At least VGA graphics capability with a minimum 512K video RAM (1MB video RAM recommended).

Media

Serebra Learning Corporation 119 - 7565 132nd Street Surrey BC    V3W 1K5 Canada

About Serebra Learning Corporation - Training Provider

Serebra Learning Corporation - Serebra Learning Corporation provides technology-based training solutions through a combination of Cortex, its proprietary learning management system (LMS), and a curriculum catalog with over 1,825 current courseware titles. Founded in 1987 (as FirstClass Systems, with a name change to Serebra in 2001), Serebra has over sixteen years" experience delivering e-learning solutions to both...
More Novell NetWare Service and Support Training from Serebra Learning Corporation
Click here for more information or to take this course
Training Directory | New Training Seminars | New Training Providers | Search | Site Map | Promote Training | Login | Links
Training-Classes.com by Skillbox® 07/18/08
Copyright 1998-2008 skillbox, inc. All rights reserved		 Connecting people who want to learn with people who love to teach
 Are you a Novell netware service training provider?
You could be on this page today - for FREE!
This page was last updated on sb5 - 07/18/08 at 04:24:30 - 02:57:18