Interconnecting Cisco Networking Devices Part 2

This is the second course in a 3 part series that prepares learners for the Cisco CCNA ICND exam 640-811 - Interconnecting Cisco Networking Devices. The course introduces fundamental routing concepts. It describes the features operation and configuration of Routing Information Protocol (RIP) Interior Gateway Routing Protocol (IGRP) Enhanced Interior Gateway Routing Protocol (EIGRP) and Open Shortest Path First (OSPF) routing protocols. This course also describes the operation of different types of access lists.

This is primarily online training This is an online eLearning or CBT training program Contact Serebra Learning Corporation for more information

Duration: 8 hours Training Presented in: English

Audience

The target audience consists of system engineers network administrators network support staff account managers and channel partner/reseller customers. The audience may be involved in designing expanding and planning simple Cisco internetworks for small or medium-sized enterprises; and configuring and supporting multiprotocol internetworks.

Objective

Upon completion of this course the student will be able to:

Topics Include

Unit 1: Address Translation

• Identify characteristics of Network Address Translation (NAT) and port address translation (PAT).
• Sequence the steps for inside source address translation.
• Sequence the steps for configuring static translation.
• Sequence the steps to configure dynamic translation.
• Sequence the steps for overloading an inside global address.
• Sequence the steps to configure overloading of inside global addresses.
• Identify commands for verifying Network Address Translation (NAT) and port address translation (PAT) configuration.

Unit 2: Routing Concepts

• Identify features of distance vector routing.
• Identify key aspects of maintaining routing information.
• Match routing loop prevention techniques with their descriptions.
• Identify features of link-state routing.
• Identify routing entities in a link-state hierarchy.
• Identify benefits and drawbacks of link-state routing.
• Identify features of a variable-length subnet mask (VLSM).
• Identify steps for calculating a variable-length subnet mask (VLSM).
• Identify features of route summarization.
• Identify considerations for implementing route summarization.

Unit 3: RIP and IGRP

• Identify features of Routing Information Protocol (RIP).
• Identify commands for configuring Routing Information Protocol (RIP).
• Identify commands for troubleshooting Routing Information Protocol (RIP) configuration.
• Identify features of Interior Gateway Routing Protocol (IGRP).
• Identify commands for configuring Interior Gateway Routing Protocol (IGRP).
• Identify commands for troubleshooting Interior Gateway Routing Protocol (IGRP) configuration.

Unit 4: EIGRP and OSPF

• Identify features of Enhanced Interior Gateway Routing Protocol (EIGRP).
• Identify commands for configuring Enhanced Interior Gateway Routing Protocol (EIGRP).
• Identify commands for troubleshooting Enhanced Interior Gateway Routing Protocol (EIGRP) configuration.
• Identify features of Open Shortest Path First (OSPF).
• Identify commands for configuring Open Shortest Path First (OSPF).
• Identify commands for troubleshooting Open Shortest Path First (OSPF) configuration.

Unit 5: Access Lists

• Identify features of an access list.
• Identify features of standard and extended access lists.
• Identify how access lists operate.
• Identify features of wildcard masking.
• Identify guidelines for implementing access lists.
• Identify commands for configuring standard IP access lists.
• Identify commands for configuring extended IP access lists.
• Identify features and functions of a named IP access list.
• Identify features of Virtual Terminal (vty) access lists.
• Verify the access list configuration.

Unit 6: IP and Inter-VLAN Routing

• Identify features of routing.
• Identify commands for configuring static routes.
• Identify features of dynamic routing protocols.
• Identify features of administrative distance.
• Identify features of classful and classless routing.
• Identify features of inter-VLAN routing.
• Identify commands for enabling inter-VLAN routing using trunks.

Duration

8 Hours

Minimum Requirements

The CDROM version of this course requires:

• At least a 486DX 33Mhz CPU.
• Microsoft Windows 3.1 or higher and a Microsoft compatible mouse.
• At least 8MB RAM.
• At least VGA graphics capability with a minimum 512K video RAM (1MB video RAM recommended).
• At least a double speed CDROM drive.
• An MPC compliant sound card with attached speakers or headphones is recommended (Currently only the CDROM version supports audio).

• At least a 486DX 33Mhz CPU.
• Microsoft Windows 3.1 or higher and a Microsoft compatible mouse.
• At least 8MB RAM and 22MB available hard disk space or file server space.
• At least VGA graphics capability with a minimum 512K video RAM (1MB video RAM recommended).

Media

CDROM
Web Based Training

• Interconnecting Cisco Networking Devices Part 1
• Interconnecting Cisco Networking Devices-Pt3