|
Provided by: SafeTSolutions Confined Space Entry TrainingTrain the Trainer |
 |
Training
Provided by SafeTSolutions
Course Outline:
Day 1
Module 1
Australian Occupational Health and Safety Legislation & AS 2865
The Legislation and the Australian Standard AS 2865
Defining a Confined Space
Responsibilities of management, employees, contractors and all parties
Strategies for implementing the Confined Space Legislation
Consultation and negotiation process for confined space safe work procedures
Duration: 2.5 hours
Code: LRICS1
Module 2
Confined Space Hazards
Hazard identification, risk assessment and control
Workplace hazards and confined space hazards
Confined Space equipment orientation
Ropes, knots and equipment set up
Duration: 2.5 hours
Code: LRICS2
Module 3
Safe Work Procedures
Implementing safe work procedures
Carrying out risk assessments
Control measures
Confined Space entry permits
The Confined Space management system
Duration: 2.5 hours
Code: LRICS3
Day 2
Module 4
Equipment Use Practical
Set up and use confined space equipment, including tripods, harness, rope rescue devices and recovery equipment
Duration: 2.5 hours
Code: LRICS4
Module 5
Atmospheric Hazards & Gas Detection
Assessing atmospheric hazards
The respiratory system
Toxic gases, their effects and safe exposure levels
Explosive gases/vapours and safe exposure levels
Oxygen hazards and safe exposure levels
As detection equipment, operation, safe use field calibration
How to test for suspected atmospheric hazards that are beyond your current equipment capabilities
Duration: 3 hours
Code: LRICS5
Module 6
Breathing Apparatus
Types of breathing equipment and their application
Operation & expected duration
Correct donning procedures
Practical use & individual consumption rates
General maintenance and hygiene
Duration: 3 hours
Code: LRICS6
Day 3
Module 7
Emergency Procedures & Life Support
Emergency Procedures
Expired Air Resuscitation, Cardio Pulmonary Resuscitation
Duration: 3 hours
Code: LRICS7
Module 9
Fire Fighting
Elements of the fire triangle
Methods of extinguishing a fire
Hazards with fighting a fire in a confined space
Extinguishing a fire using fire extinguishers (Conditional)
Duration: 3 hours
Code: LRICS9
Day 4
Module 8
Safe Entry Exit Procedures & Practical Rescue
Review of risk assessment
Completion of the Confined Space Entry Permit
Set up and use entry/exit equipment
Carry out rescue scenarios
Duration: 6 Hours
Code: LRICS8
Course Assessments Duration: 2 Hours
Day 1
Module 1
Australian Occupational Health and Safety Legislation & AS 2865
The Legislation and the Australian Standard AS 2865
Defining a Confined Space
Responsibilities of management, employees, contractors and all parties
Strategies for implementing the Confined Space Legislation
Consultation and negotiation process for confined space safe work procedures
Duration: 2.5 hours
Code: LRICS1
Module 2
Confined Space Hazards
Hazard identification, risk assessment and control
Workplace hazards and confined space hazards
Confined Space equipment orientation
Ropes, knots and equipment set up
Duration: 2.5 hours
Code: LRICS2
Module 3
Safe Work Procedures
Implementing safe work procedures
Carrying out risk assessments
Control measures
Confined Space entry permits
The Confined Space management system
Duration: 2.5 hours
Code: LRICS3
Day 2
Module 4
Equipment Use Practical
Set up and use confined space equipment, including tripods, harness, rope rescue devices and recovery equipment
Duration: 2.5 hours
Code: LRICS4
Module 5
Atmospheric Hazards & Gas Detection
Assessing atmospheric hazards
The respiratory system
Toxic gases, their effects and safe exposure levels
Explosive gases/vapours and safe exposure levels
Oxygen hazards and safe exposure levels
As detection equipment, operation, safe use field calibration
How to test for suspected atmospheric hazards that are beyond your current equipment capabilities
Duration: 3 hours
Code: LRICS5
Module 6
Breathing Apparatus
Types of breathing equipment and their application
Operation & expected duration
Correct donning procedures
Practical use & individual consumption rates
General maintenance and hygiene
Duration: 3 hours
Code: LRICS6
Day 3
Module 7
Emergency Procedures & Life Support
Emergency Procedures
Expired Air Resuscitation, Cardio Pulmonary Resuscitation
Duration: 3 hours
Code: LRICS7
Module 9
Fire Fighting
Elements of the fire triangle
Methods of extinguishing a fire
Hazards with fighting a fire in a confined space
Extinguishing a fire using fire extinguishers (Conditional)
Duration: 3 hours
Code: LRICS9
Day 4
Module 8
Safe Entry Exit Procedures & Practical Rescue
Review of risk assessment
Completion of the Confined Space Entry Permit
Set up and use entry/exit equipment
Carry out rescue scenarios
Duration: 6 Hours
Code: LRICS8
Course Assessments Duration: 2 Hours
|
|
||||||||||||
Confined Space Entry Training
General Information about the Confined Space Entry training
Our courses are Australian accredited Training programs and offer qualifications and units of Competency that are in line with National Training Packages under the National Framework of Training (NFROT). Safety training course competencies are generally from Public Safety PUA 30601 course.
The Confined Space Training Program is extensive and flexible.
A full training course encompasses all modules, including:
Legislation
Hazards
Safe Work Procedures and Risk Assessment
Equipment
Atmospheric Hazards and Gas Detection Equipment
Breathing Apparatus
Life Support
Fire Fighting
Emergency Procedures and Rescue
Alternatively we can tailor a Confined Space Training program that is targeted to specific needs based your own risk assessments. Commonly, most customer opt for a three(3) day course.
A refresher course for persons previously trained can also be arranged.
Our course is designed for an outcome that will allow the participants to this course to be capable of putting in place safe work practices to ensure a safe place of work when working in confined spaces as it applies to your workplace. They will be capable of following emergency procedures in the event of a confined space incident.
This course is based on the Australian Standard AS 2865 Safe Working in Confined Spaces
Other standard and documents referred to for this course are:
AS 1715 & AS1716 Industrial Breathing Apparatus
AS 2275 Gas Detection
National Occ Health and Safety Commission- National Exposure Standards for Atmospheric Contaminants
The learning outcomes we aim for are:
Know the Confined Spaces Legislation & Australian Standard AS 2865
Be capable of assessing atmospheric, physical, psychological, chemical and toxic hazards in a confined spaces.
Be capable of implementing a confined space risk assessment
Know the responsibilities of:
The orginisation, management, employees and contractors.
Know general Confined Space equipment requirements
Know the requirements for record keeping
Know what is required for Confined Space Entry Permits and Risk assessments
All practical exercises must be completed competently within the time limits
Course program
Most popular are the reduced duration course (3 days) which does not include CPR and Fire Fighting(Extinguishers) as these modules are normally covered by 2nd party courses already attended or readily available. Applications can be made for Recognition of Prior Learning (RPL) by providing copies of current CPR and Fire Extinguisher courses to receive a full Confined Space Entry certificate.
Module Name
OH & S Legislation, AS 2865
Risk Assessment
Safe Work Procedures and Control measures
Gas Detection & Atmospheric hazards
Respiratory Protection and Breathing Apparatus
Emergency / Rescue Procedures
Entry / Exit equipment and practical Rescue exercise
Asessment
Assessment
Knowledge based objectives will be assessed with group oral quizzes and multiple choice quizzes at the end of each module.
Skills based objectives will be assessed by having each participant carry out the skillto a set competency level. This competency levels will be based on the factors below:
1. Time to carry out the skill
2. How well carried out
3. Was the individual stressed when doing the skill
Fee Structure
Contact us to discuss your requirements and relevant fees. We provide training anywhere in Australia.
Gas Detection, SCBA, Rescue, Risk Assessment, CPR, Height Safety, Cert IV Assessment & Training and more training courses are available.
Course Timing
The Confined Space Entry course is normally conducted over full work days for duration of selected program, 8.30am 4pm with lunch 12n-12.45pm. It is possible to conduct the course over weekends, one or two days per weekend as per your requirements. Suitable dates to be negotiated.
We normally conduct a 3 day CSE course but as an alternative, a 2 day course can be arranged. This two day course is ideal for persons trained in Confined Space Entry not at present working in Confined Spaces and requiring a refresher or where the local Risk Assessment identified the confined spaces as low risk. Refresher courses for personnel having been trained within the past two years is normally only a one day course.
Special requirements you may have to be added to the course can easily be incorporated.
Contact us via email at trainin@safetsolutions.com or
Mob: 0411 685 805 or o409 433 229
Ph: Int 61 07 54246335
Fax: Int 61 07 54264386
Our courses are Australian accredited Training programs and offer qualifications and units of Competency that are in line with National Training Packages under the National Framework of Training (NFROT). Safety training course competencies are generally from Public Safety PUA 30601 course.
The Confined Space Training Program is extensive and flexible.
A full training course encompasses all modules, including:
Legislation
Hazards
Safe Work Procedures and Risk Assessment
Equipment
Atmospheric Hazards and Gas Detection Equipment
Breathing Apparatus
Life Support
Fire Fighting
Emergency Procedures and Rescue
Alternatively we can tailor a Confined Space Training program that is targeted to specific needs based your own risk assessments. Commonly, most customer opt for a three(3) day course.
A refresher course for persons previously trained can also be arranged.
Our course is designed for an outcome that will allow the participants to this course to be capable of putting in place safe work practices to ensure a safe place of work when working in confined spaces as it applies to your workplace. They will be capable of following emergency procedures in the event of a confined space incident.
This course is based on the Australian Standard AS 2865 Safe Working in Confined Spaces
Other standard and documents referred to for this course are:
AS 1715 & AS1716 Industrial Breathing Apparatus
AS 2275 Gas Detection
National Occ Health and Safety Commission- National Exposure Standards for Atmospheric Contaminants
The learning outcomes we aim for are:
Know the Confined Spaces Legislation & Australian Standard AS 2865
Be capable of assessing atmospheric, physical, psychological, chemical and toxic hazards in a confined spaces.
Be capable of implementing a confined space risk assessment
Know the responsibilities of:
The orginisation, management, employees and contractors.
Know general Confined Space equipment requirements
Know the requirements for record keeping
Know what is required for Confined Space Entry Permits and Risk assessments
All practical exercises must be completed competently within the time limits
Course program
Most popular are the reduced duration course (3 days) which does not include CPR and Fire Fighting(Extinguishers) as these modules are normally covered by 2nd party courses already attended or readily available. Applications can be made for Recognition of Prior Learning (RPL) by providing copies of current CPR and Fire Extinguisher courses to receive a full Confined Space Entry certificate.
Module Name
OH & S Legislation, AS 2865
Risk Assessment
Safe Work Procedures and Control measures
Gas Detection & Atmospheric hazards
Respiratory Protection and Breathing Apparatus
Emergency / Rescue Procedures
Entry / Exit equipment and practical Rescue exercise
Asessment
Assessment
Knowledge based objectives will be assessed with group oral quizzes and multiple choice quizzes at the end of each module.
Skills based objectives will be assessed by having each participant carry out the skillto a set competency level. This competency levels will be based on the factors below:
1. Time to carry out the skill
2. How well carried out
3. Was the individual stressed when doing the skill
Fee Structure
Contact us to discuss your requirements and relevant fees. We provide training anywhere in Australia.
Gas Detection, SCBA, Rescue, Risk Assessment, CPR, Height Safety, Cert IV Assessment & Training and more training courses are available.
Course Timing
The Confined Space Entry course is normally conducted over full work days for duration of selected program, 8.30am 4pm with lunch 12n-12.45pm. It is possible to conduct the course over weekends, one or two days per weekend as per your requirements. Suitable dates to be negotiated.
We normally conduct a 3 day CSE course but as an alternative, a 2 day course can be arranged. This two day course is ideal for persons trained in Confined Space Entry not at present working in Confined Spaces and requiring a refresher or where the local Risk Assessment identified the confined spaces as low risk. Refresher courses for personnel having been trained within the past two years is normally only a one day course.
Special requirements you may have to be added to the course can easily be incorporated.
Contact us via email at trainin@safetsolutions.com or
Mob: 0411 685 805 or o409 433 229
Ph: Int 61 07 54246335
Fax: Int 61 07 54264386
About The Training Provider: SafeTSolutions
SafeTSolutions - SafeTSolutions is an Australian training provider specialising in OHS training courses provided on site. The majority of our courses are Nationally accredited in Australia and facilitated by traininers with extensive practical experience. Visit our web site http://www.safetsolutions.com for more details. We provide courses as listed below anywhere in Australia.
Life & Rescue International...
There are no comments. Be the first to add one!