|
Provided by: HAZMAT Plans & Programs, Inc OSHA 30 Hour Construction Outreach TrainingConstruction Safety |
 |
Certificate Program
Provided by HAZMAT Plans & Programs, Inc
The OSHA 30 Hour Outreach Training for Construction is Instructor Led training and takes place in our Denver, Colorado Training Facility. HP&P has been teaching OSHA Outreach training since 1998 and currently has three OSHA Authorized trainers on-staff.
The OSHA 30-hour Construction Outreach class is designed for persons with safety responsibilities such as safety directors, managers, supervisors, foremen, persons on safety committees, administrators, and persons responsible for training.
The topics included in the OSHA 30 Hour Outreach training are more in-depth than the OSHA 10 Hour Outreach class, although not "Competent Person Level". In this class students will learn how to use the Code of Federal Regulations (CFR) and be able to find what OSHA standards are applicable to their work. Upon completion of this training, students will be able to return to their job site with the ability to better recognize and analyze workplace hazards and find workable and OSHA compliant solutions.
The OSHA 30 Hour Construction Outreach training is offered monthly. Our training facility is located in Aurora, CO, a convenient 15 minute drive from Downtown Denver, the Denver Tech area (DTC) and Denver International Airport (DIA).
Time crunch? Please call our office, 303-360-9801, and we can make arrangements for this training to fit your workplace schedule.
Visit our Web Sites for more information:
www. hppsafety. com
www. hazmat-5. com
Related Awards, Degrees or Certifications: US Department of Labor OSHA 30 Hour Construction Outreach Training wallet card
Related Jobs or Careers: Project Management, Construction Superintendents, Safety Officer, estimators, Masonry, roofing, utilities, excavating, demolitio
|
|
||||||||||||||||||
OSHA 30 Hour Construction Outreach Training Seminar Schedule
| Date | Location | |||
|---|---|---|---|---|
| [Register] | ||||
| [Register] | ||||
| [Register] |
OSHA 30 Hour Construction Outreach Training
The OSHA 30 Hour Construction Outreach Training consists of the following topics per OSHA Outreach Guidelines:
30-HOUR MANDATORY COURSE TOPICS = 12 HOURS MINIMUM
Introduction to OSHA (2 Hours)
1. O. S. H. A., the Act
2. General Duty Clause
3. Employer and Employee Responsibilities
4. Whistle-blower Protection
5. Record Keeping basics
Inspections, Citations and Penalties
General Safety & Health Provisions, Competent Person
Value of Safety & Health
OSHA Website, OSHA 800 number & available resources
OSHA Focus Four Hazards - at least Five Hours (must cover all four areas (minimum 30 minutes on each)
1. Fall Protection, Subpart M (e. g., floors, platforms, roofs)
2, Electrical, Subpart K (e. g., overhead power lines, power tools and cords, temporary wiring, grounding)
3. Struck by (e. g., falling objects, trucks, cranes, constructing masonry walls)
4. Caught in/ between (e. g., trench hazards, unguarded machinery, equipment)
Personal Protective and Lifesaving Equipment, Subpart E - at least Two Hours
Health Hazards in Construction (for example, noise, hazard com. and crystalline silica) - at least Two Hours
Stairways and Ladders, Subpart X - at least One Hour
30-HOUR ELECTIVE COURSE TOPICS - At least 6 of the following topics =12 HOURS MINIMUM
1. Fire Protection and Prevention, Subpart F
2. Materials Handling, Storage, Use and Disposal, Subpart H
3. Tools - Hand and Power, Subpart I
4. Welding and Cutting, Subpart J
5. Scaffolds, Subpart L
6. Cranes, Derricks, Hoists, Elevators, and Conveyors,
Subpart N
7. Motor Vehicles, Mechanized Equipment and Marine Operations;
Rollover Protective Structures and Overhead Protection;
and Signs, Signals and Barricades, Subparts O, W, and G
8. Excavations, Subpart P
9. Concrete and Masonry Construction, Subpart Q
10. Steel Erection, Subpart R
11. Safety and Health Program
12. Confined Space Entry
13. Powered Industrial Trucks
14. Ergonomics
The remaining SIX class hours are used to instruct on other construction hazards or policies and/ or to expand on
mandatory or elective topics.
The OSHA 30 Hour Safety Outreach training course takes place on three consecutive days of approximately ten hours each. A test will be taken on the final day. Students will receive a wallet card from HP&P Safety, a class completion certificate and a wallet card from The U. S. Department of Labor (OSHA) after completing this course. Receipt of the Dept. of Labor card takes approximately 4-6 weeks.
30-HOUR MANDATORY COURSE TOPICS = 12 HOURS MINIMUM
Introduction to OSHA (2 Hours)
1. O. S. H. A., the Act
2. General Duty Clause
3. Employer and Employee Responsibilities
4. Whistle-blower Protection
5. Record Keeping basics
Inspections, Citations and Penalties
General Safety & Health Provisions, Competent Person
Value of Safety & Health
OSHA Website, OSHA 800 number & available resources
OSHA Focus Four Hazards - at least Five Hours (must cover all four areas (minimum 30 minutes on each)
1. Fall Protection, Subpart M (e. g., floors, platforms, roofs)
2, Electrical, Subpart K (e. g., overhead power lines, power tools and cords, temporary wiring, grounding)
3. Struck by (e. g., falling objects, trucks, cranes, constructing masonry walls)
4. Caught in/ between (e. g., trench hazards, unguarded machinery, equipment)
Personal Protective and Lifesaving Equipment, Subpart E - at least Two Hours
Health Hazards in Construction (for example, noise, hazard com. and crystalline silica) - at least Two Hours
Stairways and Ladders, Subpart X - at least One Hour
30-HOUR ELECTIVE COURSE TOPICS - At least 6 of the following topics =12 HOURS MINIMUM
1. Fire Protection and Prevention, Subpart F
2. Materials Handling, Storage, Use and Disposal, Subpart H
3. Tools - Hand and Power, Subpart I
4. Welding and Cutting, Subpart J
5. Scaffolds, Subpart L
6. Cranes, Derricks, Hoists, Elevators, and Conveyors,
Subpart N
7. Motor Vehicles, Mechanized Equipment and Marine Operations;
Rollover Protective Structures and Overhead Protection;
and Signs, Signals and Barricades, Subparts O, W, and G
8. Excavations, Subpart P
9. Concrete and Masonry Construction, Subpart Q
10. Steel Erection, Subpart R
11. Safety and Health Program
12. Confined Space Entry
13. Powered Industrial Trucks
14. Ergonomics
The remaining SIX class hours are used to instruct on other construction hazards or policies and/ or to expand on
mandatory or elective topics.
The OSHA 30 Hour Safety Outreach training course takes place on three consecutive days of approximately ten hours each. A test will be taken on the final day. Students will receive a wallet card from HP&P Safety, a class completion certificate and a wallet card from The U. S. Department of Labor (OSHA) after completing this course. Receipt of the Dept. of Labor card takes approximately 4-6 weeks.
About The Training Provider: HAZMAT Plans & Programs, Inc
HAZMAT Plans & Programs, Inc - HAZMAT Plans & Programs, Inc., dba HP&P Safety, Inc., is a full service Occupational Health and Safety consulting and training firm. HP&P has been assisting small to medium size companies with meeting OSHA and DOT worker safety compliance since its inception in 1992. Areas of safety experience and expertise include Disaster Preparedness/ Emergency Response, Risk Management, Commercial...
