|
Provided by: 6P International, LLC 10 Hour 30 Hour Construction OSHA Outreach CoursesConstruction Safety |
 |
Training
Provided by 6P International, LLC
Save 10% when you purchase both the 10 & 30 hour Outreach courses at the same time!
COURSE NAME:
OSHA - 10 Hour Construction Industry Outreach Training Program
COURSE DESCRIPTION:
1. 0 IACET Approved CEU This course is designed for construction workers, foremen, job supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA construction safety and health 10-hour course completion card from the Department of Labor. Note: This online course has been reviewed and accepted by OSHA for online distribution.
------------------------------------------------------------
COURSE NAME:
OSHA - OSHA 30 Hour Construction Outreach Courses
CATEGORY:
Construction Safety and Health
COURSE DESCRIPTION:
3. 0 IACET Approved CEU This course covers thirty (30) hours of training, required by the Occupational Health and Safety Act (OSHA), that apply toward the 30-hour Construction Industry course completion card. The course is comprised of 25 sections, each either one or two hours in length, and covers topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of this course will help meet the Construction Industry standards established by OSHA.
|
|
||||||||||||
10 Hour 30 Hour Construction OSHA Outreach Courses
Save 10 when you purchase both the 10 & 30 hour Outreach courses at the same time
COURSE NAME:
OSHA - 10 Hour Construction Industry Outreach Training Program
COURSE DESCRIPTION:
1. 0 IACET Approved CEU This course is designed for construction workers, foremen, job supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA construction safety and health 10-hour course completion card from the Department of Labor. Note: This online course has been reviewed and accepted by OSHA for online distribution.
LEARNING OBJECTIVES:
State the purpose of the OSH Act and list the functions of OSHA
List the OSHA inspection priorities and describe the inspection process
Describe the rights and responsibilities of employers and employees ender the OSHA Act
The basic requirements for proper aisle and passageway maintenance
Guidelines for identification and protection of floor opening
To understand the importance of effective egress fire protection program
TOPICS COVERED:
Introduction to OSHA
General Safety & Health Provisions
Electrical
Fall Protection
Personal Protective & Lifesaving Equipment
Materials Handling, Storage, Use & Disposal
Hand & Power Tools
Scaffolds
Cranes, Derricks, Hoists, Elevators & Conveyors
Excavations
Stairways & Ladders
--------------------------------------------------------------
COURSE NAME:
OSHA - OSHA 30 Hour Construction Outreach Courses
CATEGORY:
Construction Safety and Health
COURSE DESCRIPTION:
3. 0 IACET Approved CEU This course covers thirty (30) hours of training, required by the Occupational Health and Safety Act (OSHA), that apply toward the 30-hour Construction Industry course completion card. The course is comprised of 25 sections, each either one or two hours in length, and covers topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of this course will help meet the Construction Industry standards established by OSHA.
LEARNING OBJECTIVES:
Locate OSHA Standards references applicable to specific hazardous conditions and practices (Introduction to OSHA Standards)
Recognize the aspects of 1926 Subpart C (General Safety and Health Provisions)
Implement preventative measures for accidents in their workplace (Subpart D- Occupational health and Environmental Controls)
Describe types of personal protective equipment (PPE), and the requirements for use in OSHA standards (Subpart E- Personal Protective Equipment)
Understand the requirements for fire protection in the workplace (Subpart F- Fire Protection and Prevention)
Identify types of rigging equipment used to protect employees (Subpart H- Rigging; Subpart N- Cranes and Rigging)
Identify the critical health and safety hazards of welding and cutting in the construction industry (Subpart J- Welding and Cutting)
Identify common electrical hazards and related OSHA standards (Subpart K- Electrical Standards)
Understand the importance of scaffolding for workers in elevated workplaces (Subpart L- Scaffolding)
Implement measures for protecting workers and equipment from dangerous falls (Subpart M- Fall Protection)
Recognize the hazards associated with working in or around excavation sites (Subpart P- Excavations)
Understand the safety requirements necessary to protect workers around concrete and masonry jobs (Subpart Q- Concrete and Masonry)
Identify the precautions and hazards to protect workers using explosives or blasting agents (Subpart T- Demolition)
Protect workers who perform jobs on or around stairways or ladders at worksites (Subpart X - Stairways and Ladders)
List and describe the hazards and prevalence of confined spaces
SEAT TIME:
This course has been approved for 30 hours of seat time.
Additional Materials:
You will be sent a copy of OSHA Standards for Construction. The book will serve as an invaluable resource for referencing OSHA standards that have been covered in this course, as well as researching regulations or standards that could help in establishing a safer workplace.
TESTING:
At the end of each module, you will be given a 10 question module quiz. You must score at least 70 on each module quiz to move forward in the course. You will be given up to three opportunities to pass each module quiz. Failure to successfully pass the quiz will result in you not being able to take the course for a six- month period. Once you have successfully completed all of the modules, you must pass a final exam to recieve full credit for the course. The exam is 25 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70 to pass this course. You will be given up to three opportunities to pass the final exam; if you do not pass it after three tries, you will be locked out of this course and you will be required to purchase it agian if you wish to complete it.
COURSE NAME:
OSHA - 10 Hour Construction Industry Outreach Training Program
COURSE DESCRIPTION:
1. 0 IACET Approved CEU This course is designed for construction workers, foremen, job supervisors, and anyone involved in the construction industry. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA construction safety and health 10-hour course completion card from the Department of Labor. Note: This online course has been reviewed and accepted by OSHA for online distribution.
LEARNING OBJECTIVES:
State the purpose of the OSH Act and list the functions of OSHA
List the OSHA inspection priorities and describe the inspection process
Describe the rights and responsibilities of employers and employees ender the OSHA Act
The basic requirements for proper aisle and passageway maintenance
Guidelines for identification and protection of floor opening
To understand the importance of effective egress fire protection program
TOPICS COVERED:
Introduction to OSHA
General Safety & Health Provisions
Electrical
Fall Protection
Personal Protective & Lifesaving Equipment
Materials Handling, Storage, Use & Disposal
Hand & Power Tools
Scaffolds
Cranes, Derricks, Hoists, Elevators & Conveyors
Excavations
Stairways & Ladders
--------------------------------------------------------------
COURSE NAME:
OSHA - OSHA 30 Hour Construction Outreach Courses
CATEGORY:
Construction Safety and Health
COURSE DESCRIPTION:
3. 0 IACET Approved CEU This course covers thirty (30) hours of training, required by the Occupational Health and Safety Act (OSHA), that apply toward the 30-hour Construction Industry course completion card. The course is comprised of 25 sections, each either one or two hours in length, and covers topics pertaining to regulations covered by Standard 29 CFR 1926. The successful completion of this course will help meet the Construction Industry standards established by OSHA.
LEARNING OBJECTIVES:
Locate OSHA Standards references applicable to specific hazardous conditions and practices (Introduction to OSHA Standards)
Recognize the aspects of 1926 Subpart C (General Safety and Health Provisions)
Implement preventative measures for accidents in their workplace (Subpart D- Occupational health and Environmental Controls)
Describe types of personal protective equipment (PPE), and the requirements for use in OSHA standards (Subpart E- Personal Protective Equipment)
Understand the requirements for fire protection in the workplace (Subpart F- Fire Protection and Prevention)
Identify types of rigging equipment used to protect employees (Subpart H- Rigging; Subpart N- Cranes and Rigging)
Identify the critical health and safety hazards of welding and cutting in the construction industry (Subpart J- Welding and Cutting)
Identify common electrical hazards and related OSHA standards (Subpart K- Electrical Standards)
Understand the importance of scaffolding for workers in elevated workplaces (Subpart L- Scaffolding)
Implement measures for protecting workers and equipment from dangerous falls (Subpart M- Fall Protection)
Recognize the hazards associated with working in or around excavation sites (Subpart P- Excavations)
Understand the safety requirements necessary to protect workers around concrete and masonry jobs (Subpart Q- Concrete and Masonry)
Identify the precautions and hazards to protect workers using explosives or blasting agents (Subpart T- Demolition)
Protect workers who perform jobs on or around stairways or ladders at worksites (Subpart X - Stairways and Ladders)
List and describe the hazards and prevalence of confined spaces
SEAT TIME:
This course has been approved for 30 hours of seat time.
Additional Materials:
You will be sent a copy of OSHA Standards for Construction. The book will serve as an invaluable resource for referencing OSHA standards that have been covered in this course, as well as researching regulations or standards that could help in establishing a safer workplace.
TESTING:
At the end of each module, you will be given a 10 question module quiz. You must score at least 70 on each module quiz to move forward in the course. You will be given up to three opportunities to pass each module quiz. Failure to successfully pass the quiz will result in you not being able to take the course for a six- month period. Once you have successfully completed all of the modules, you must pass a final exam to recieve full credit for the course. The exam is 25 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70 to pass this course. You will be given up to three opportunities to pass the final exam; if you do not pass it after three tries, you will be locked out of this course and you will be required to purchase it agian if you wish to complete it.
About The Training Provider: 6P International, LLC
6P International, LLC - We are a certified training center for the American Safety & Health Institute (ASHI) and the Emergency Care & Safety Institute (ECSI). We offer training in Hospital Incident Command System (HICS), HazWoper, Hospital First Receiver, First Aid, CPR, AED, Emergency Medical Response for the Workplace, Bloodborne Pathogens, Emergency Oxygen Administration, CPR for the Professional Rescuer, Child...
