Provided by: PDHengineer. com-Decatur Professional Development, LLC

Rigid Pavements Spall and Crack Repair Using Epoxy Resin Products

Overview

Rigid pavement is a part of life for society. Its uses for both vehicular and aircraft traffic have provided significant impacts to the growth of our society. No matter how well the installation was accomplished, over time it will deteriorate due to the traffic and weather. Some of the common deteriorations are cracking and spalling.

Given the heavy volume of use of pavements, rapid repair methods are required which provide both timely and permanent repairs. This can be fairly easily accomplished through the use of epoxy resin products. Epoxy resins provide an expedient method of repairing pavement while minimizing the impact to traffic disruption. Often, the pavement can be restored to allow traffic use within twenty four hours.

This course will provide you, as the engineer, design considerations and an insight into the safe and effective uses of epoxy resin grout, mortars and concrete in the repair of seven common spall and crack situations found in rigid pavements on roads and airfields.

The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of the course to obtain PDH credits.

Specific Knowledge or Skill Attained

This course teaches the following specific knowledge and skills:
  • Approved Epoxy Materials
  • Applications and Intended Uses of the Materials
  • Aggregates for Epoxy Resin Concretes and Mortars
  • Field Mixing and Batch Mixing
  • Approved Methods for repair of seven common spalling and crack conditions in rigid pavements
  • Protection of Repaired Areas During Curing Process
  • Health and Safety Precautions

State Board Acceptance

This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is an approved provider of continuing education in all states that pre-approve course providers. In all other states that mandate continuing education for engineers, it is the individual engineer's responsibility to determine the suitability of activities for PDH credit. The state boards typically accept online* courses that cover technical, managerial** or ethical content and which are relevant to the practice of engineering. The course must have a clear purpose or objective with a content that will maintain, improve or expand the skills and knowledge of the licensee's field of practice. For questions about your mandatory PDH requirements, visit the website of your state licensing board.

*Online courses are accepted by all state licensing boards that mandate continuing education. Other than New York (which limits online courses to 18 PDH) and Iowa (which limits online courses to 6 PDH), there are no limits placed by other states on the number of hours that can be earned through online continuing education. Consult with your state licensing board if you have any questions about the acceptability of online courses.

**The New York State Board of Engineers does not accept general office management courses, but will accept project management courses that are offered by an approved provider and that are technical in nature and contribute to the engineer's professional practice.Please Note: Continuing Education credits for this course are awarded as PDH (Professional Development Hour Credits).
This is primarily online training
on-line e-learning cbt (computer based)This is an online eLearning or CBT training program
Training Presented in:English
Training Provided by PDHengineer. com-Decatur Professional Development, LLC
Rigid Pavements Spall and Crack Repair Using Epoxy Resin Products
Overview

Rigid pavement is a part of life for society. Its uses for both vehicular and aircraft traffic have provided significant impacts to the growth of our society. No matter how well the installation was accomplished, over time it will deteriorate due to the traffic and weather. Some of the common deteriorations are cracking and spalling.

Given the heavy volume of use of pavements, rapid repair methods are required which provide both timely and permanent repairs. This can be fairly easily accomplished through the use of epoxy resin products. Epoxy resins provide an expedient method of repairing pavement while minimizing the impact to traffic disruption. Often, the pavement can be restored to allow traffic use within twenty four hours.

This course will provide you, as the engineer, design considerations and an insight into the safe and effective uses of epoxy resin grout, mortars and concrete in the repair of seven common spall and crack situations found in rigid pavements on roads and airfields.

The student must take a multiple-choice quiz consisting of twenty (20) questions at the end of the course to obtain PDH credits.

Specific Knowledge or Skill Attained

This course teaches the following specific knowledge and skills:
  • Approved Epoxy Materials
  • Applications and Intended Uses of the Materials
  • Aggregates for Epoxy Resin Concretes and Mortars
  • Field Mixing and Batch Mixing
  • Approved Methods for repair of seven common spalling and crack conditions in rigid pavements
  • Protection of Repaired Areas During Curing Process
  • Health and Safety Precautions

State Board Acceptance

This course can be used by professional engineers to fulfill PDH requirements mandated by state and provincial licensing boards. Decatur Professional Development is an approved provider of continuing education in all states that pre-approve course providers. In all other states that mandate continuing education for engineers, it is the individual engineer's responsibility to determine the suitability of activities for PDH credit. The state boards typically accept online* courses that cover technical, managerial** or ethical content and which are relevant to the practice of engineering. The course must have a clear purpose or objective with a content that will maintain, improve or expand the skills and knowledge of the licensee's field of practice. For questions about your mandatory PDH requirements, visit the website of your state licensing board.

*Online courses are accepted by all state licensing boards that mandate continuing education. Other than New York (which limits online courses to 18 PDH) and Iowa (which limits online courses to 6 PDH), there are no limits placed by other states on the number of hours that can be earned through online continuing education. Consult with your state licensing board if you have any questions about the acceptability of online courses.

**The New York State Board of Engineers does not accept general office management courses, but will accept project management courses that are offered by an approved provider and that are technical in nature and contribute to the engineer's professional practice.Please Note: Continuing Education credits for this course are awarded as PDH (Professional Development Hour Credits).
About The Training Provider: PDHengineer. com-Decatur Professional Development, LLC
PDHengineer. com-Decatur Professional Development, LLC - PDHengineer is a leader in continuing education for licensed professional engineers. Offering online courses, live web seminars and live in-person seminars, PDHengineer. com has been trusted by tens of thousands of engineers around the country as a convenient, low-cost provider of state-board accepted PDH. We have well over 2000 hours of courses available online covering all engineering...
Want to Sell More training?
Custom Search
tcw11-v473M-04/24/15-18:53:17-()[B]-[A]-[B] -14:41:19