WELDECC
Dear Sirs,
We are Weldecc (Welding Education & Consultation Center) is a subsidiary of GEKASH Company, one of the leading vocational and technical training companies in Egypt, and Middle East
GEKASH is a member in several international societies and institutions, such as ASNT, PMI, AWS...etc, where these international bodies recognize our training and certification programs.
Thus our headquarters is based in Alexandria, Egypt, we offer training in KSA, Kwait, Sudan, and most of the Middle Eastern countries
For detailed information, kindly visit our site: www. Weldecc. Com
We are Weldecc (Welding Education & Consultation Center) is a subsidiary of GEKASH Company, one of the leading vocational and technical training companies in Egypt, and Middle East
GEKASH is a member in several international societies and institutions, such as ASNT, PMI, AWS...etc, where these international bodies recognize our training and certification programs.
Thus our headquarters is based in Alexandria, Egypt, we offer training in KSA, Kwait, Sudan, and most of the Middle Eastern countries
For detailed information, kindly visit our site: www. Weldecc. Com
WELDECC is based in Alexandria, Alexandria,
GEKASH
About:
GEKASH, Consultation and Inspection was founded in the year 2002 as a partnership company.
Its main activities were trading in petrochemical products, as well as supply and apply of lining products.
Growing rapidly, GEKASH entered a joint venture with a Danish partner JOM ( Joining of Metals Institute ), the result was WELDECC ( welding education and consultation center ), which is one of the leading educational, and consultancy centers in Egypt and Middle-East.
WELDECC Activities:
1- General Training: We deliver training on high standards, not just awareness courses, but vocational and professional training in accordance to the international standards. Such courses
A- In the field of Quality Management Systems
ISO-17025 Requirements for the competence of testing and calibration laboratories : This course includes specific items such as estimation of uncertainty in measurements, which needs knowledge of the international publications in this field. Also, sampling, which need highly specialized experts to prepare and present the course.
Lab Assessment Course is not just normal assessment or auditing course. It needs a person who worked at a research, testing or calibration lab and is knowledgeable in laboratory assessment procedure.
Lab Proficiency Tests: This course needs knowledge of methods for participating in proficiency testing for interlaboratory comparison and/ or round robin testing programs that will at least meet the requirements of the International Laboratory Accreditation Cooperation (ILAC).
The same could be said about courses like:
o ISO 11133: Guidelines for preparation and production of culture media
o ISO 22000 standard: Food safety management standard.
o ISO 4833: Horizontal method for the enumeration of microorganisms
o ISO 6887: Preparation of test samples
o ISO-19036: Uncertainty in measurements and testing.
o Document control in accredited labs
o Assuring Quality of Test Results (Statistical Techniques)
o Risk Management in food labs.
B- In the field of Specific Lab Inspection Techniques
High performance liquid chromatography
Atomic Absorption Graphite Furnace Hydride System
Metal Tests (X-ray diffraction, X-ray fluorescence, Metallographic and Mechanical testing.
Inspection and testing of tires and wheels.
Olive Oil Analysis and categorization.
Sandpaper Chemical analysis.
Heavy Metals in Industrial Products.
Trace Elements in Food
Tobacco Chemical and NDT Tests
These and several other courses in similar subjects related to specific lab techniques are required.
C- In the field of Some Specialized Academic Subjects:
Effects of common alloying elements in steel
The role of molybdenum in stainless steel
Migration of chromium & nickel in stainless steel
Technical Course in Pesticides
Technical Course in Poisons
D- In the Field of Inspection of Industrial Products:
Several courses have been delivered in this field which include, but not limited to:
Inspection & Sampling of textiles and garments.
Inspection & Sampling of leather products
Testing of fumigants residuals in cereals
Testing of Organic Industrial Products
Timber Classification and Testing
Detergents Testing and Evaluation
E- Other Fields such as :
- Maintenance
- Quality
- Electrical power systems
- Mechanical engineering
- Welding technology
- Automatic control
- General management
- Metallurgy and material science
- Industrial application
- Chemical engineering
- Operation
Visit WWW. Weldecc. com to see our complete training spectrum
F- Special tailored Courses:-
Weldecc also delivers courses specially required by customers to meet their special needs for learning. These courses are prepared and delivered by a highly qualified staff in the fields of interest. Weldecc has been working with these kind of Courses for several years, specially in the Gulf area.
2- Professional programs training :-
It is intense training consists of several training programs in the same field (average of 5 courses). The aim of such programs is to graduate professional personnel in some fields, such as
- Piping Engineering
- Welding Engineering
- Quality
- NDT
Also professional programs could be prepared in any other field in accordance to customer needs.
3- Certification training :-
Weldecc is a member in some international societies such as ASNT, AWS , PMI etc, as a result Weldecc delivers some special training for certification purposes such as :-
- Non destructive testing ( MT, PT, UT, RT, VT)
- Project management (PMP, APM)
- Welding (CWI, CWEng)
4- Consultation :-
Weldecc's highly qualified personnel are entitled to consultation activities, helping the factories, and firms to overcome their technical and managerial problems.
The areas of consultation include, but not limited to:
- Welding
- Quality
- Textile industry
- Cement industry
5- Inspection and repair :-
This is one of the most important activity in Weldecc, as it gave Weldecc its excellent repetition in the market.
Inspection and repaint of any metallic material or equipment is done according to international standards such as API, ASME, and ASNT . etc.
Weldecc's past experience:-
Working in the Egyptian and Gulf area for several years on different scales gave Weldecc the experience and ability to work with huge scale projects with the same quality and time efficiency done with small or medium sized projects.
The attached table is a brief for Weldecc's past experience in all the fields of activity.
About:
GEKASH, Consultation and Inspection was founded in the year 2002 as a partnership company.
Its main activities were trading in petrochemical products, as well as supply and apply of lining products.
Growing rapidly, GEKASH entered a joint venture with a Danish partner JOM ( Joining of Metals Institute ), the result was WELDECC ( welding education and consultation center ), which is one of the leading educational, and consultancy centers in Egypt and Middle-East.
WELDECC Activities:
1- General Training: We deliver training on high standards, not just awareness courses, but vocational and professional training in accordance to the international standards. Such courses
A- In the field of Quality Management Systems
ISO-17025 Requirements for the competence of testing and calibration laboratories : This course includes specific items such as estimation of uncertainty in measurements, which needs knowledge of the international publications in this field. Also, sampling, which need highly specialized experts to prepare and present the course.
Lab Assessment Course is not just normal assessment or auditing course. It needs a person who worked at a research, testing or calibration lab and is knowledgeable in laboratory assessment procedure.
Lab Proficiency Tests: This course needs knowledge of methods for participating in proficiency testing for interlaboratory comparison and/ or round robin testing programs that will at least meet the requirements of the International Laboratory Accreditation Cooperation (ILAC).
The same could be said about courses like:
o ISO 11133: Guidelines for preparation and production of culture media
o ISO 22000 standard: Food safety management standard.
o ISO 4833: Horizontal method for the enumeration of microorganisms
o ISO 6887: Preparation of test samples
o ISO-19036: Uncertainty in measurements and testing.
o Document control in accredited labs
o Assuring Quality of Test Results (Statistical Techniques)
o Risk Management in food labs.
B- In the field of Specific Lab Inspection Techniques
High performance liquid chromatography
Atomic Absorption Graphite Furnace Hydride System
Metal Tests (X-ray diffraction, X-ray fluorescence, Metallographic and Mechanical testing.
Inspection and testing of tires and wheels.
Olive Oil Analysis and categorization.
Sandpaper Chemical analysis.
Heavy Metals in Industrial Products.
Trace Elements in Food
Tobacco Chemical and NDT Tests
These and several other courses in similar subjects related to specific lab techniques are required.
C- In the field of Some Specialized Academic Subjects:
Effects of common alloying elements in steel
The role of molybdenum in stainless steel
Migration of chromium & nickel in stainless steel
Technical Course in Pesticides
Technical Course in Poisons
D- In the Field of Inspection of Industrial Products:
Several courses have been delivered in this field which include, but not limited to:
Inspection & Sampling of textiles and garments.
Inspection & Sampling of leather products
Testing of fumigants residuals in cereals
Testing of Organic Industrial Products
Timber Classification and Testing
Detergents Testing and Evaluation
E- Other Fields such as :
- Maintenance
- Quality
- Electrical power systems
- Mechanical engineering
- Welding technology
- Automatic control
- General management
- Metallurgy and material science
- Industrial application
- Chemical engineering
- Operation
Visit WWW. Weldecc. com to see our complete training spectrum
F- Special tailored Courses:-
Weldecc also delivers courses specially required by customers to meet their special needs for learning. These courses are prepared and delivered by a highly qualified staff in the fields of interest. Weldecc has been working with these kind of Courses for several years, specially in the Gulf area.
2- Professional programs training :-
It is intense training consists of several training programs in the same field (average of 5 courses). The aim of such programs is to graduate professional personnel in some fields, such as
- Piping Engineering
- Welding Engineering
- Quality
- NDT
Also professional programs could be prepared in any other field in accordance to customer needs.
3- Certification training :-
Weldecc is a member in some international societies such as ASNT, AWS , PMI etc, as a result Weldecc delivers some special training for certification purposes such as :-
- Non destructive testing ( MT, PT, UT, RT, VT)
- Project management (PMP, APM)
- Welding (CWI, CWEng)
4- Consultation :-
Weldecc's highly qualified personnel are entitled to consultation activities, helping the factories, and firms to overcome their technical and managerial problems.
The areas of consultation include, but not limited to:
- Welding
- Quality
- Textile industry
- Cement industry
5- Inspection and repair :-
This is one of the most important activity in Weldecc, as it gave Weldecc its excellent repetition in the market.
Inspection and repaint of any metallic material or equipment is done according to international standards such as API, ASME, and ASNT . etc.
Weldecc's past experience:-
Working in the Egyptian and Gulf area for several years on different scales gave Weldecc the experience and ability to work with huge scale projects with the same quality and time efficiency done with small or medium sized projects.
The attached table is a brief for Weldecc's past experience in all the fields of activity.
 online course |
 instructor-led class |
 learn at home |
 group study |
 self-directed study |
 cd-based training |
 DVD video training |
 printed book |
 e-book digital book |
 workshop seminar |
 train the trainer |
 computer-based learning |
 discount pricing |
 online tutorial |
LIQUID PENETRANT TESTING
: The objective of the course is to train persons (engineers & inspectors) with some experience in Non Destructive Testing and to certify them to get Level II Liquid Penetrant Testing (PT) Inspector. The certification will be according to the requirements of the American Society of Nondestructive Testing Recommended Practice No.(ASNT-TC-1A)
: The objective of the course is to train persons (engineers & inspectors) with some experience in Non Destructive Testing and to certify them to get Level II Liquid Penetrant Testing (PT) Inspector. The certification will be according to the requirements of the American Society of Nondestructive Testing Recommended Practice No.(ASNT-TC-1A)MAGNETIC PARTICLE TESTING level I II
: The main objective of the course is to train, qualify and certify personnel to Levels I & II inspectors in the Nondestructive Magnetic Particle Testing techniques
Training and Certification Methodology:
Syllabus of the training course is prepared according the
Recommended Practice of the American Society of Non-
Destructive Testing (SNT-TC-1A). The exams are composed of
three tests, General Test, Specific Test and Practical Test.
RADIOGRAPHIC TESTING level I II
: The main objective of the course is to
train, qualify and certify personnel to
Levels I & II inspectors in the
Nondestructive Radiographic Testing
techniques: The training and
certification process is performed
according to the American Society of
Nondestructive Testing Recommended
Practice No SNT-TC-1A.
This certificate will enable candidates to start working directly after recieving the certificate
: The main objective of the course is to
train, qualify and certify personnel to
Levels I & II inspectors in the
Nondestructive Radiographic Testing
techniques: The training and
certification process is performed
according to the American Society of
Nondestructive Testing Recommended
Practice No SNT-TC-1A.
This certificate will enable candidates to start working directly after recieving the certificateUltrasonic Testing Levels III
: Training and Certification Methodology:
1. Syllabus of the training course is prepared according the Recommended Practice of the American Society of Non-Destructive Testing (SNT-TC-1A). The exams are composed of three tests, General Test, Specific Test and Practical Test.
2. Training includes more...
: Training and Certification Methodology:
1. Syllabus of the training course is prepared according the Recommended Practice of the American Society of Non-Destructive Testing (SNT-TC-1A). The exams are composed of three tests, General Test, Specific Test and Practical Test.
2. Training includes more...Visual InspectionVT
: Course Objective:
The course aims at introducing
engineers, inspectors and senior
welding supervisors to the
process of visual inspection of
welds including assuring the
compliance with the standards
and codes requirements.
Course
Syllabus of the training course is prepared according the
Recommended Practice of the American Society of Non-
Destructive Testing (SNT-TC-1A). The exams are composed of
three tests, more...
: Course Objective:
The course aims at introducing
engineers, inspectors and senior
welding supervisors to the
process of visual inspection of
welds including assuring the
compliance with the standards
and codes requirements.
Course
Syllabus of the training course is prepared according the
Recommended Practice of the American Society of Non-
Destructive Testing (SNT-TC-1A). The exams are composed of
three tests, - A asked: I'd like to receive information on getting training for two or more Quality Inspectors on Liquid Penetrant Testing. I'm looking for them to be certified to Level II when complete. They've performed the actual testing before but need training in the area of interpretation of results, etc. Please let me know what locations training is provided in and also if on site training is an option. about LIQUID PENETRANT TESTING
- A asked: Am a graduate of welding and fabrication gateway industrial petro gas institute ,oni-ogun state nigeria. i would like to know how much it would cost for mt, pt, vt and . cswip course with you and what is expected of me. would also like to know your calendar on these courses. thank you about WELDECC
- M asked: when rt test starts about WELDECC
- S asked: ask about the pesticides residues analysis training. about WELDECC
- B asked: where exactly at saudi arabia ur training cnter? And is there any at riyadh? Thank u and best regards! about WELDECC
- A asked: more info about this co about WELDECC
- S asked: I want to certify to Level III in UT. What is the cost and which date exams are likely to come. AND YOUR OFFICE IN INDIA PREFERABLY IN CHENNAI. please furnish details Regard's S. DWARAKA about Ultrasonic Testing Levels III
- R asked: I need information regarding where and when i can get certification for level about MAGNETIC PARTICLE TESTING level I II
- A asked: Dr, I am looking for PHD dissertations under this topic a The feasibility study of using nuclear energy in electricity generation and desalination of sea water in Eygpta . Do you know some one who has done his/ her PHD in this topic? Regards, about WELDECC
- D asked: Please send me a course outline with schedule and classroom locations. Thanks Derek about Ultrasonic Testing Levels III
- A asked: i want to know your training programming or schedule in the PIPING AND EQUIPMENT. about WELDECC
- U asked: dear sir i would like know about aws certificate how can i get the training can you help me in this matter thx with regards about WELDECC
- J asked: Salamalaikom, Dear Sir, do you have welding inspector courses and you accept foreigner students? and send me the cost of welding inspector training Please reply. Mr. Sanchez Email: com Mobile: +-- about WELDECC
- M asked: IM Y AND IM PHYSIC IM WORK INSPACTOR SINCE Y I NEED certificate NDT level II about WELDECC
- C asked: requesting literture on certification. about MAGNETIC PARTICLE TESTING level I II
- M asked: I want to know about Ultrasonic Testing Levels II. and reply today about Ultrasonic Testing Levels III
- A asked: could you please provide me the following details about AWS cours: the price and time schedule and your contacts to arrange course for me. about WELDECC
- M asked: I did a welding & fabrication course in full time at Burnley college for years level , &(diploma) and have been in the industry for years. Iam really interested in doing pipe welding but dont know how to go about it, eg, wot course to go on and is there a company out there willing to train u up, have you any ideas? about WELDECC
- L asked: can you send me rates and schedules for classes Thanks about Visual InspectionVT
- A asked: how we can make a partnership with WELDECC training center specially in IT and Business about WELDECC
- M asked: . Schedule of training course . Location and city ,country . Charges /person . Hotel arrangement . about RADIOGRAPHIC TESTING level I II
- A asked: ® . about RADIOGRAPHIC TESTING level I II
- M asked: Sir, We want to send our welders for training in your institution for an advance welding course. GTAW PIPE CS-SS, FCAW, GMAW. Can you please send us a quotation including hotel accomodation. FLOWSERVE AL RUSHAID CO. LTD. about WELDECC
- L asked: Where may I find the nearest location for training. I am in Cleveland, Ohio about MAGNETIC PARTICLE TESTING level I II
- K asked: I am a new QA Manager and need to get up to speed ASAP on certain ASNT Certifications such as Dye Pent, Visual Weld Insp, Mass Spec, etc Any help in this would be greatly appreciated. Thanks about LIQUID PENETRANT TESTING
|
Head Office
22 Bahaa eldeen GhatwaryAlexandriaAlexandria
|
