Heats School of Welding Technology, Inc |
 |
About H. E. A. T. S.
HEATS was conceived by a Sr. Welding Inspector Practitioner (CSWIP-UK), and a Mechanical Engineer by profession. HEATS was conceived in his heart because he recognized the strong demand for welders locally and overseas as well as Welding Inspectors.
MISSION
The mission of HEATS is to produce "World Class Welders, Welding Inspectors and Skilled-Workers.
VISION
The vision of HEATS is primarily to be the premier training center in the Philippines and secondarily to alleviate the financial status of Tarlaquenos (filipinos in general) by providing training to out-of-school youth in the province, provide assistance in getting a job for them in welding industry.
CONTACT US
If you are NGO's or LGU's or Private individual and you have the pure heart in helping these youth, you can contact us at pwtc_luzon yahoo. com Let us join hand in hand in alleviating the financial status of our underprivileged countrymen.
If you are interested in our training courses, contact us at the same email address stated above.
WELDING COURSES OFFERED
COURSE TITLE: Shielded Metal Arc Welding (SMAW-I) - PLATE
NOMINAL DURATION: 268 hrs.
COURSE DESCRIPTION:
This course is designed to enhance the knowledge, skills and attitudes in Shielded Metal Arc Welding in accordance with industry standards. It covers core competencies such as Setting-up Welding Equipment, Preparing Weld Materials, Fitting up Weld Materials, Welding Carbon Steel Plates Using SMAW and Repairing Welds.
COURSE OUTCOMES:
At the end of this course, the student/ trainee will be able to:
1. Weld carbon steel plates components and Pass the 3G (Vertical-up) Position
2. Read blueprint
3. Fit-up weld joints
4. Prepare weld materials
5. Set-up welding machines
6. Do repair of welds
ENTRY REQUIREMENTS:
Trainees or students wishing to gain entry into this course should possess the following requirements:
can communicate either oral and written
physically and mentally fit
with good moral character
can perform basic mathematical computation
COURSE TITLE: Shielded Metal Arc Welding (SMAW-II) - PIPE
NOMINAL DURATION: 268 hrs.
COURSE DESCRIPTION:
This course is designed to enhance the knowledge, skills and attitudes of SMAW Welder in accordance with industry standards. It covers competencies such as Setting-up Welding Equipment, Preparing Weld Materials, Fitting up Weld Materials, Welding Carbon Steel Plates Using SMAW, Welding Carbon Steel Plates and Pipes Using SMAW and Repairing Welds.
COURSE OUTCOMES:
At the end of this course, the student/ trainee will be able to:
1. Weld carbon steel plates and pipes components using SMAW at 6G Uphill Position (6 inch diameter pipe)
2. Read blueprint
3. Fit-up weld joints
4. Prepare weld materials
5. Set-up welding machines
6. Do repair of welds
ENTRY REQUIREMENTS:
Trainees or students wishing to gain entry into this course should possess the following requirements:
completed training in SMAW - I or a holder of SMAW NC I or can pass the practical test for 3G position and written exam
can communicate both oral and written
physically and mentally fit
can perform basic mathematical computation
COURSE TITLE: Gas Tungsten Arc Welding (GTAW-II) - PIPE
NOMINAL DURATION: 268 hrs.
COURSE DESCRIPTION:
This course is designed to enhance the knowledge, skills and attitudes of GTAW Welder in accordance with industry standards. It covers core competencies such as Setting-up Welding Equipment, Preparing Weld Materials, Fitting up Welds Materials, Welding Carbon Steel Plates Using GTAW, Welding Carbon Steel Plates and Pipes Using GTAW and Repairing Welds.
COURSE OUTCOMES:
At the end of this course, the student/ trainee will be able to:
1. Weld carbon steel plates and pipe components using GTAW and pass the 6G Uphill (2" diameter pipe)position.
2. Read blueprint
3. Fit-up weld joints
4. Prepare weld materials
5. Set-up welding machines
6. Do repair of welds
ENTRY REQUIREMENTS:
Trainees or students wishing to gain entry into this course should possess the following requirements:
Completed training in SMAW - II or a holder of SMAW NC II or can passed the practical test for 6G position and written exam
can communicate either oral and written
physically and mentally fit
can perform basic mathematical computation
Course Title: Welding Inspector's Course
Duration: 40 hrs
Course Title: NDT Courses (UT/ PT/ MT) Level I and II
HEATS was conceived by a Sr. Welding Inspector Practitioner (CSWIP-UK), and a Mechanical Engineer by profession. HEATS was conceived in his heart because he recognized the strong demand for welders locally and overseas as well as Welding Inspectors.
MISSION
The mission of HEATS is to produce "World Class Welders, Welding Inspectors and Skilled-Workers.
VISION
The vision of HEATS is primarily to be the premier training center in the Philippines and secondarily to alleviate the financial status of Tarlaquenos (filipinos in general) by providing training to out-of-school youth in the province, provide assistance in getting a job for them in welding industry.
CONTACT US
If you are NGO's or LGU's or Private individual and you have the pure heart in helping these youth, you can contact us at pwtc_luzon yahoo. com Let us join hand in hand in alleviating the financial status of our underprivileged countrymen.
If you are interested in our training courses, contact us at the same email address stated above.
WELDING COURSES OFFERED
COURSE TITLE: Shielded Metal Arc Welding (SMAW-I) - PLATE
NOMINAL DURATION: 268 hrs.
COURSE DESCRIPTION:
This course is designed to enhance the knowledge, skills and attitudes in Shielded Metal Arc Welding in accordance with industry standards. It covers core competencies such as Setting-up Welding Equipment, Preparing Weld Materials, Fitting up Weld Materials, Welding Carbon Steel Plates Using SMAW and Repairing Welds.
COURSE OUTCOMES:
At the end of this course, the student/ trainee will be able to:
1. Weld carbon steel plates components and Pass the 3G (Vertical-up) Position
2. Read blueprint
3. Fit-up weld joints
4. Prepare weld materials
5. Set-up welding machines
6. Do repair of welds
ENTRY REQUIREMENTS:
Trainees or students wishing to gain entry into this course should possess the following requirements:
can communicate either oral and written
physically and mentally fit
with good moral character
can perform basic mathematical computation
COURSE TITLE: Shielded Metal Arc Welding (SMAW-II) - PIPE
NOMINAL DURATION: 268 hrs.
COURSE DESCRIPTION:
This course is designed to enhance the knowledge, skills and attitudes of SMAW Welder in accordance with industry standards. It covers competencies such as Setting-up Welding Equipment, Preparing Weld Materials, Fitting up Weld Materials, Welding Carbon Steel Plates Using SMAW, Welding Carbon Steel Plates and Pipes Using SMAW and Repairing Welds.
COURSE OUTCOMES:
At the end of this course, the student/ trainee will be able to:
1. Weld carbon steel plates and pipes components using SMAW at 6G Uphill Position (6 inch diameter pipe)
2. Read blueprint
3. Fit-up weld joints
4. Prepare weld materials
5. Set-up welding machines
6. Do repair of welds
ENTRY REQUIREMENTS:
Trainees or students wishing to gain entry into this course should possess the following requirements:
completed training in SMAW - I or a holder of SMAW NC I or can pass the practical test for 3G position and written exam
can communicate both oral and written
physically and mentally fit
can perform basic mathematical computation
COURSE TITLE: Gas Tungsten Arc Welding (GTAW-II) - PIPE
NOMINAL DURATION: 268 hrs.
COURSE DESCRIPTION:
This course is designed to enhance the knowledge, skills and attitudes of GTAW Welder in accordance with industry standards. It covers core competencies such as Setting-up Welding Equipment, Preparing Weld Materials, Fitting up Welds Materials, Welding Carbon Steel Plates Using GTAW, Welding Carbon Steel Plates and Pipes Using GTAW and Repairing Welds.
COURSE OUTCOMES:
At the end of this course, the student/ trainee will be able to:
1. Weld carbon steel plates and pipe components using GTAW and pass the 6G Uphill (2" diameter pipe)position.
2. Read blueprint
3. Fit-up weld joints
4. Prepare weld materials
5. Set-up welding machines
6. Do repair of welds
ENTRY REQUIREMENTS:
Trainees or students wishing to gain entry into this course should possess the following requirements:
Completed training in SMAW - II or a holder of SMAW NC II or can passed the practical test for 6G position and written exam
can communicate either oral and written
physically and mentally fit
can perform basic mathematical computation
Course Title: Welding Inspector's Course
Duration: 40 hrs
Course Title: NDT Courses (UT/ PT/ MT) Level I and II
Heats School of Welding Technology, Inc is based in Tarlac City, Tarlac,
WE OFFER THE FOLLOWING COURSES:
1.) SMAW PLATE - 268 hrs (Offered monthly)
2.) SMAW PIPE - 268 hrs (Offered monthly)
3.) GTAW PIPE - 268 hrs (offered monthly)
4.) Welding Inspector's Course - 40 hrs
5.) NDT Courses (UT/ PT/ MT)
6.) Internal Quality Auditing (IQA)
7.) ISO 9000 Awareness Seminar
COURSE DETAILS
COURSE TITLE: Shielded Metal Arc Welding (SMAW-I) - PLATE
NOMINAL DURATION: 268 hrs.
COURSE DESCRIPTION:
This course is designed to enhance the knowledge, skills and attitudes in Shielded Metal Arc Welding in accordance with industry standards. It covers core competencies such as Setting-up Welding Equipment, Preparing Weld Materials, Fitting up Weld Materials, Welding Carbon Steel Plates Using SMAW and Repairing Welds.
COURSE OUTCOMES:
At the end of this course, the student/ trainee will be able to:
1. Weld carbon steel plates components and Pass the 3G (Vertical-up) Position
2. Read blueprint
3. Fit-up weld joints
4. Prepare weld materials
5. Set-up welding machines
6. Do repair of welds
ENTRY REQUIREMENTS:
Trainees or students wishing to gain entry into this course should possess the following requirements:
can communicate either oral and written
physically and mentally fit
with good moral character
can perform basic mathematical computation
COURSE TITLE: Shielded Metal Arc Welding (SMAW-II) - PIPE
NOMINAL DURATION: 268 hrs.
COURSE DESCRIPTION:
This course is designed to enhance the knowledge, skills and attitudes of SMAW Welder in accordance with industry standards. It covers competencies such as Setting-up Welding Equipment, Preparing Weld Materials, Fitting up Weld Materials, Welding Carbon Steel Plates Using SMAW, Welding Carbon Steel Plates and Pipes Using SMAW and Repairing Welds.
COURSE OUTCOMES:
At the end of this course, the student/ trainee will be able to:
1. Weld carbon steel plates and pipes components using SMAW at 6G Uphill Position (6 inch diameter pipe)
2. Read blueprint
3. Fit-up weld joints
4. Prepare weld materials
5. Set-up welding machines
6. Do repair of welds
ENTRY REQUIREMENTS:
Trainees or students wishing to gain entry into this course should possess the following requirements:
completed training in SMAW - I or a holder of SMAW NC I or can pass the practical test for 3G position and written exam
can communicate both oral and written
physically and mentally fit
can perform basic mathematical computation
COURSE TITLE: Gas Tungsten Arc Welding (GTAW-II) - PIPE
NOMINAL DURATION: 268 hrs.
COURSE DESCRIPTION:
This course is designed to enhance the knowledge, skills and attitudes of GTAW Welder in accordance with industry standards. It covers core competencies such as Setting-up Welding Equipment, Preparing Weld Materials, Fitting up Welds Materials, Welding Carbon Steel Plates Using GTAW, Welding Carbon Steel Plates and Pipes Using GTAW and Repairing Welds.
COURSE OUTCOMES:
At the end of this course, the student/ trainee will be able to:
1. Weld carbon steel plates and pipe components using GTAW and pass the 6G Uphill (2" diameter pipe)position.
2. Read blueprint
3. Fit-up weld joints
4. Prepare weld materials
5. Set-up welding machines
6. Do repair of welds
ENTRY REQUIREMENTS:
Trainees or students wishing to gain entry into this course should possess the following requirements:
Completed training in SMAW - II or a holder of SMAW NC II or can passed the practical test for 6G position and written exam
can communicate either oral and written
physically and mentally fit
can perform basic mathematical computation
Course Title: Welding Inspector's Course
Duration: 40 hrs
1.) SMAW PLATE - 268 hrs (Offered monthly)
2.) SMAW PIPE - 268 hrs (Offered monthly)
3.) GTAW PIPE - 268 hrs (offered monthly)
4.) Welding Inspector's Course - 40 hrs
5.) NDT Courses (UT/ PT/ MT)
6.) Internal Quality Auditing (IQA)
7.) ISO 9000 Awareness Seminar
COURSE DETAILS
COURSE TITLE: Shielded Metal Arc Welding (SMAW-I) - PLATE
NOMINAL DURATION: 268 hrs.
COURSE DESCRIPTION:
This course is designed to enhance the knowledge, skills and attitudes in Shielded Metal Arc Welding in accordance with industry standards. It covers core competencies such as Setting-up Welding Equipment, Preparing Weld Materials, Fitting up Weld Materials, Welding Carbon Steel Plates Using SMAW and Repairing Welds.
COURSE OUTCOMES:
At the end of this course, the student/ trainee will be able to:
1. Weld carbon steel plates components and Pass the 3G (Vertical-up) Position
2. Read blueprint
3. Fit-up weld joints
4. Prepare weld materials
5. Set-up welding machines
6. Do repair of welds
ENTRY REQUIREMENTS:
Trainees or students wishing to gain entry into this course should possess the following requirements:
can communicate either oral and written
physically and mentally fit
with good moral character
can perform basic mathematical computation
COURSE TITLE: Shielded Metal Arc Welding (SMAW-II) - PIPE
NOMINAL DURATION: 268 hrs.
COURSE DESCRIPTION:
This course is designed to enhance the knowledge, skills and attitudes of SMAW Welder in accordance with industry standards. It covers competencies such as Setting-up Welding Equipment, Preparing Weld Materials, Fitting up Weld Materials, Welding Carbon Steel Plates Using SMAW, Welding Carbon Steel Plates and Pipes Using SMAW and Repairing Welds.
COURSE OUTCOMES:
At the end of this course, the student/ trainee will be able to:
1. Weld carbon steel plates and pipes components using SMAW at 6G Uphill Position (6 inch diameter pipe)
2. Read blueprint
3. Fit-up weld joints
4. Prepare weld materials
5. Set-up welding machines
6. Do repair of welds
ENTRY REQUIREMENTS:
Trainees or students wishing to gain entry into this course should possess the following requirements:
completed training in SMAW - I or a holder of SMAW NC I or can pass the practical test for 3G position and written exam
can communicate both oral and written
physically and mentally fit
can perform basic mathematical computation
COURSE TITLE: Gas Tungsten Arc Welding (GTAW-II) - PIPE
NOMINAL DURATION: 268 hrs.
COURSE DESCRIPTION:
This course is designed to enhance the knowledge, skills and attitudes of GTAW Welder in accordance with industry standards. It covers core competencies such as Setting-up Welding Equipment, Preparing Weld Materials, Fitting up Welds Materials, Welding Carbon Steel Plates Using GTAW, Welding Carbon Steel Plates and Pipes Using GTAW and Repairing Welds.
COURSE OUTCOMES:
At the end of this course, the student/ trainee will be able to:
1. Weld carbon steel plates and pipe components using GTAW and pass the 6G Uphill (2" diameter pipe)position.
2. Read blueprint
3. Fit-up weld joints
4. Prepare weld materials
5. Set-up welding machines
6. Do repair of welds
ENTRY REQUIREMENTS:
Trainees or students wishing to gain entry into this course should possess the following requirements:
Completed training in SMAW - II or a holder of SMAW NC II or can passed the practical test for 6G position and written exam
can communicate either oral and written
physically and mentally fit
can perform basic mathematical computation
Course Title: Welding Inspector's Course
Duration: 40 hrs
 online course |
 instructor-led class |
 learn at home |
 group study |
 self-directed study |
 cd-based training |
 DVD video training |
 printed book |
 e-book digital book |
 workshop seminar |
 train the trainer |
 computer-based learning |
 discount pricing |
 online tutorial |
SMAW PLATE
: COURSE TITLE: Shielded Metal Arc Welding (SMAW-I) - PLATE
NOMINAL DURATION: 268 hrs.
COURSE DESCRIPTION:
This course is designed to enhance the knowledge, skills and attitudes in Shielded Metal Arc Welding in accordance with industry standards. It covers core competencies such as Setting-up Welding Equipment, Preparing Weld Materials, Fitting up Weld Materials, Welding Carbon Steel Plates Using SMAW and Repairing Welds.
- C asked: When is the schedule oftraining? Where? How much? about SMAW PLATE
- R asked: Goldgates Academy Inc. is offering hrs finishing course for Call Center Agents. I would like to know how we can partner with you to further extend the free training program to your graduates or existing students. I look forward for a meeting schedule with you to further discuss in detail the purpose of this partnership. about Heats School of Welding Technology, Inc
- C asked: ma'am/ sir, I just want to ask from your good office regarding this follwing matters: - when the training started in the year - how much the cost or expenses for the whole training. - how long the training it complete. about Heats School of Welding Technology, Inc
- E asked: OCTOBER , GOOD DAY! I JUST WANT TO INQUIRE IF YOU HAVE OPENING FOR WELDING AND NDT TRAINOR IN YOUR SCHOOL. Y EXPERIENCE IS NDT/ WELDING TRAINOR FOR ALOST YEARS. I A NOW A LEVEL IN UT AND RT AND LEVEL SPECIALIST IN PT AND PT. Y CONTACT NUBER: I CAN BE AVAILABLE ANYTIE IF REQUESTED. THANKS AND GOOD DAY. R. LOADILLA INQUIRER about Heats School of Welding Technology, Inc
- C asked: do you have a training center in the philippines? how much will it cost me to complete this course? about SMAW PLATE
- N asked: i want to know if you have training center in nigeria about Heats School of Welding Technology, Inc
- B asked: How do I tig Welding? about Heats School of Welding Technology, Inc
- E asked: What are the classification or different levels of a welding inspector in the philippines? What are the requirements of being a welding inspector in the philippines? about Heats School of Welding Technology, Inc
- V asked: are you giving the traning for CSWIP. IN MUMBAI AND PLEASE PROVIDE ME CONTACT DETAILS. about Heats School of Welding Technology, Inc
- A asked: am a graduate of welding and fabrication ingateway industrial petro gas institute oni, ogun state nigeria. i would like to know the prices for you vt, mt, pt courses. would also like to know your calender and process of applying for these courses and requirements about Heats School of Welding Technology, Inc
- A asked: sir / madam greetings.....This is PURESNACK FOOD HOUSE CORP. We are a company engaged in manufacturing business. We are looking for welder applicant that graduated from your school. Interested applicant may submit or email resume at com. ph or mail to no. Lbica Compd. Malinis St. Lawang Bato, Valenzuela City . Applicants can reach us at tel. nos. / / / / loc. . look for Jhovie/ Bhel about Heats School of Welding Technology, Inc
- M asked: please send seminar details. about Heats School of Welding Technology, Inc
- D asked: I am a civil engineer and i am interested to study welding inspection where should i enroll im from philippines working in Libya now, about Heats School of Welding Technology, Inc
- E asked: how to go in your school the sketh and the dormitory about how many hours a dayt to gain the hours about Heats School of Welding Technology, Inc
- N asked: mam and sir.. good day po, dito po ako sa jeddah ksa nag wowork as a machine operator, gusto ko po mag trainee ng course ng smaw at gmaw. may branch po ba kayo sa manila. taga san pedro laguna po ako nakatira. pede ko po ba malaman contact no. kung sino po maari makausap.. salamat po ng marami about SMAW PLATE
- M asked: dear sir i have just completed my tig welding training in pakistan and now i want to get training in your school for geting good job and future about Heats School of Welding Technology, Inc
- M asked: dear sir i have just completed my tig welding training in pakistan and now i want to get training in your school for geting good job and future about Heats School of Welding Technology, Inc
- M asked: dear sir i have just completed my tig welding training in pakistan and now i want to get training in your school for geting good job and future about Heats School of Welding Technology, Inc
- J asked: What is the schedule for the welding inspector course in ? about Heats School of Welding Technology, Inc
- J asked: where is your office here in manila or landline no. about Heats School of Welding Technology, Inc
- V asked: i'm a y. o. mechanical eng'g graduate and would like to enroll in your ndt course, how much is the seminar? and when would it start? Hoping you could advice me, thank you very much about Heats School of Welding Technology, Inc
- K asked: fees. dates. location about Heats School of Welding Technology, Inc
- asked: is there any certifications? about SMAW PLATE
- A asked: hilow can i about SMAW PLATE
- N asked: how much is the training fee for smaw? about Heats School of Welding Technology, Inc
|
Head Office
Romulo Highway, #4 Joanne Subd., CarangianTarlac CityTarlac
|
